ADDN ALTN AND UPGRADATION OF SHOPPING COMPLEX AND AUGMENTATION OF EXISTING ARMY PUBLIC SCHOOL AT BATHINDA MIL STN

Amount

NOTE:- (Applicable for all parts/items/):- The bidders/contractors are advised to read tender document, all drawings & all corrigendum/ amendments and General conditions of contracts before entry/quoting the rates.

Lump sum price worked out by the tenderer for BUILDING WORKS as listed in Schedule ‘A’ Part-I(Ref pre-priced schedule attached separately)

Lump sum price worked out by the tenderer for INTERNAL ELECTRIFICATION WORKS as listed in Schedule ‘A’ Part-II(Ref pre-priced schedule attached separately)

Lump sum price worked out by the tenderer for INTERNAL WATER SUPPLY WORKS as listed in Schedule ‘A’ Part-III(Ref pre-priced schedule attached separately)

Lump sum price worked out by the tenderer for ROAD, PATH, HARD STANDING AND CULVERT WORKS as listed in Schedule ‘A’ Part-IV(Ref pre-priced schedule attached separately)

Lump sum price worked out by the tenderer for AREA DRAINAGE WORKS as listed in Schedule ‘A’ Part-V(Ref pre-priced schedule attached separately)

Lump sum price worked out by the tenderer for SEWAGE DISPOSAL WORKS as listed in Schedule ‘A’ Part-VI(Ref pre-priced schedule attached separately)

Lump sum price worked out by the tenderer for FENCING, GATE AND FOUNTAIN WORKS as listed in Schedule ‘A’ Part-VII(Ref pre-priced schedule attached separately)

Lump sum price worked out by the tenderer for DEMOLITION AND DISMANTLING as listed in Schedule ‘A’ Part-VIII(Ref pre-priced schedule attached separately)

Lump sum price worked out by the tenderer for EXTERNAL WATER SUPPLY WORKS as listed in Schedule ‘A’ Part-IX(Ref pre-priced schedule attached separately)

Lump sum price worked out by the tenderer for EXTERNAL ELECTRIFICATION as listed in Schedule ‘A’ Part-X(Ref pre-priced schedule attached separately)

Lump sum price worked out by the tenderer for SUMMER COOLING APPLIANCES as listed in Schedule ‘A’ Part-XI(Ref pre-priced schedule attached separately)

Lump sum price worked out by the tenderer for SITE CLEARANCE, EXCAVATION AND EARTH WORKS as listed in Schedule ‘A’ Part-XII(Ref pre-priced schedule attached separately)

Lump sum price worked out by the tenderer for ARBORICULTURE as listed in Schedule ‘A’ Part-XIII(Ref pre-priced schedule attached separately)

Lump sum price worked out by the tenderer for FIRE FIGHTING as listed in Schedule ‘A’ Part-XIV(Ref pre-priced schedule attached separately)

Schedule 'A' Part-XV(FURNITURE)

Desk with bench as per Model No. Godrej Genii 1 Seater Desk + Bench (Size Mark 3) of Godrej Interio or equivalent of Geeken, Methodex as approved by the GE

Shoe locker as per Model No. Step-In 16-Pairs Steel Shoe Cabinet of Godrej Interio or equivalent of Geeken, Methodex as approved by the GE

Stool steel (760 mm high) as per drawing No. FD-409 sheet No. 1/1

Table officers (steel) as per drawing No. FD-1003 sheet Nos 1/2 & 2/2

Table clerks (steel) as per drawing No. FD-1004 sheet No. 1/1

Table with drawer (900 mm X 600 mm X 760 mm) (steel) as per drawing No. FD-1008 sheet Nos 1/2 & 2/2

Book case (steel) as per drawing No. FD-1028 sheet No. 1/1

Almirah large steel as per drawing No. FD-1031 sheet No. 1/1

Almirah small steel as per drawing No. FD-1032 sheet No. 1/1

Chair Computer as per drawing No. FD/E6/MAP/01 sheet No. 1/1

Table Computer as per drawing No. FD/E6/MAP/03 sheet No. 1/1

Chair Writing as per drawing No. FD/E6/MAP/12 sheet No. 1/1

Bed Stead Iron Hospital as per drawing No. HFD/ 2001 sheet Nos 1/2 & 2/2

Board Notice/Display Board of size (2400mm X 1200mm) of Make:- Alkosign, Model No:-ARTW 120240 or other equilent make as approved by the GE

Board Notice (1830 mm X 1220 mm) as per drawing No. FD-99(M) sheet No. 1/1

Table laboratory work bench lab type as per drawing No. FD-140(M) sheet No. 1/1

Chair wooden bottom without arms as per drawing No. FD-285 sheet No. 1/1

Work bench workshop (1800 mm X 900 mm X 760 mm) (steel) as per drawing No. FD-1024 sheet No. 1/1

Schedule 'A' Part-XVI(MISCELLANEOUS PARTS)

Providing and laying at or near ground level factory made kerb stone of any size, with drainage channel, made of M-25 (Design Mix) grade cement concrete, in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

S & F hot rolled medium and high tensile structural steel of grade E165 as per IS 15911: 2010 as in framed work such as grills, grating, etc., with ends of bars of shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors including hold fast complete all as specified and as directed.

Material & Labour for providing and fixing stainless steel (grade X 02Cr19Ni1O, 304 S2, surface finish No. 4 as per IS 6911: 2017) gate made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.

Providing and laying 60 mm thick factory made rubber coated, chamfered edge cement concrete paver block of M-35 conforming to IS 15658: 2021 grade with approved colour, design and pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness, size and shape, made by table vibratory method using polyurethane mould, laid in required colour and pattern over and including 30 mm thick compacted bed of coarse sand having gradation as per IRC SP 63: 2018 and 2 to 4 mm wide joints filled with fine sand having gradation as per IRC SP 63: 2018, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

Drilling and tapping cast iron water mains (in position) for branch connections of the internal dia 25 mm complete all as specified and as directed.

Drilling and tapping cast iron/ ductile iron/ galvanised iron water mains (in position) for branch connections of the internal dia 100 mm complete all as specified and as directed.

M & L for cutting galvanised mild steel pipe of nominal bore 80 mm, in position for and including insertion of new tee piece including necessary fittings and fixtures complete all as specified and as directed.

Supply and lay high density polyethylene pipe (HDPE) of pressure rating PN 6(0.6 Mpa), material grade PE 100 and nominal outside dia 50 mm as per IS 4984: 2016 including all fittings and fixtures in trenches complete all as specified and as directed.

Supply and lay high density polyethylene pipe (HDPE) of pressure rating PN 6(0.6 Mpa), material grade PE 100 and nominal outside dia 75 mm as per IS 4984: 2016 including all fittings and fixtures in trenches complete all as specified and as directed.

S & F rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 5000 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes complete all as specified and as directed.

S & F rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 500 litres capacity, white colour hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes complete all as specified and as directed.

S & F 15 mm nominal size, nonrising spindle type fancy angle stop valves, two ways in double control with wall flange, made of cast brass including knob, knob components, divertor & components, nickel-chromium plated finish complete all as specified and as directed.

M & L for construction of new valve pit/chamber of size 900 mm (Length) X 900 mm (Breadth) X 900 mm (depth) including necessary earth work in any type of soil, PCC foundation M7.5(Nominal Mix) using 40 mm nominal size graded crushed stone aggregate as in base concrete, brick work with sub class 'B' bricks, non-modular sizes as per IS 1077: 1992, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6, cement plaster 20 mm thick internally in two coats of (15 mm and 5 mm) in cement mortar 1:4, 3 mm thick mild steel sheet of any grade and designation as per IS 513: 2008 and IS 10748: 2004 welded with angle iron (40 mm X 40 mm X 6 mm) frame of structural steel, frame welded with angle iron (50 mm X 50 mm X 6 mm) frame of structural steel, welded to flat iron of size 150 mm X 50 mm X 6 mm of structural steel, fixed with bolt of 16 mm dia anchored with plate of size 100 mm X 100 mm X 3 mm of structural steel, bolt and anchored plate embedded in 250 mm thick PCC coping in M15(Nominal Mix) using 20 mm nominal size graded crushed stone aggregate, mild steel handle, grade E165 as per IS 15911: 2010 for structural steel with necessary, welding, riveting, bolting including painting exposed steel surfaces with two coats of bituminous paint and embedded surfaces of steel with two coats of tar, finishing exposed faces of concrete surfaces and plaster surfaces with three coats of white wash and all as per drawing No. BTD-811 Sheet Nos 1/2 and 2/2 of HQ CE Bathinda Zone complete all as specified and as directed.

M & L for construction of new valve pit/chamber of size 750 mm (Length) X 750 mm (Breadth) X 750 mm (depth) including necessary earth work in any type of soil, PCC foundation M7.5(Nominal Mix) using 40 mm nominal size graded crushed stone aggregate as in base concrete, brick work with sub class 'B' bricks, non-modular sizes as per IS 1077: 1992, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6, cement plaster 20 mm thick internally in two coats of (15 mm and 5 mm) in cement mortar 1:4, 3 mm thick mild steel sheet of any grade and designation as per IS 513: 2008 and IS 10748: 2004 welded with angle iron (40 mm X 40 mm X 6 mm) frame of structural steel, frame welded with angle iron (50 mm X 50 mm X 6 mm) frame of structural steel, welded to flat iron of size 150 mm X 50 mm X 6 mm of structural steel, fixed with bolt of 16 mm dia anchored with plate of size 100 mm X 100 mm X 3 mm of structural steel, bolt and anchored plate embedded in 250 mm thick PCC coping in M15(Nominal Mix) using 20 mm nominal size graded crushed stone aggregate, mild steel handle, grade E165 as per IS 15911: 2010 for structural steel with necessary, welding, riveting, bolting including painting exposed steel surfaces with two coats of bituminous paint and embedded surfaces of steel with two coats of tar, finishing exposed faces of concrete surfaces and plaster surfaces with three coats of white wash and all as per drawing No. BTD-811 Sheet Nos 1/2 and 2/2 of HQ CE Bathinda Zone complete all as specified and as directed.

S & F factory made precast cover slab including frame made of steel fibre reinforced concrete (SFRC), medium duty, 100 kN breaking load in any shape and size (square/ rectangular/circular), 75 mm thickness, minimum M30 grade of concrete, conforming to IS 12592: 2002 complete all as specified and as directed.

S & F class SN 8 structured wall polyethylene piping system (pipe with online coupler and elastomeric rubber ring) with hollow annular profiled outer surface and a smooth inner surface (double wall corrugated) for non-pressure underground drainage and Sewerage application, Type B, Nominal Size (DN/ID) 150, made of polyethylene (PE) material conforming to per IS 16098 (Part 2):2013 and to be transported, handled, installed and jointed as per Annex A of IS 16098 (Part 2):2013 complete all as specified and as directed.

S & F class SN 8 structured wall polyethylene piping system (pipe with online coupler and elastomeric rubber ring) with hollow annular profiled outer surface and a smooth inner surface (double wall corrugated) for non-pressure underground drainage and Sewerage application, Type B, Nominal Size (DN/ID) 170, made of polyethylene (PE) material conforming to per IS 16098 (Part 2):2013 and to be transported, handled, installed and jointed as per Annex A of IS 16098 (Part 2):2013 complete all as specified and as directed.

S & F class SN 8 structured wall polyethylene piping system (pipe with online coupler and elastomeric rubber ring) with hollow annular profiled outer surface and a smooth inner surface (double wall corrugated) for non-pressure underground drainage and Sewerage application, Type B, Nominal Size (DN/ID) 200, made of polyethylene (PE) material conforming to per IS 16098 (Part 2):2013 and to be transported, handled, installed and jointed as per Annex A of IS 16098 (Part 2):2013 complete all as specified and as directed.

S & F class SN 8 structured wall polyethylene piping system (pipe with online coupler and elastomeric rubber ring) with hollow annular profiled outer surface and a smooth inner surface (double wall corrugated) for non-pressure underground drainage and Sewerage application, Type B, Nominal Size (DN/ID) 300, made of polyethylene (PE) material conforming to per IS 16098 (Part 2):2013 and to be transported, handled, installed and jointed as per Annex A of IS 16098 (Part 2):2013 complete all as specified and as directed.

M & L for laying of bricks locally available sub class 'B' bricks, non-modular sizes as per IS 1077: 1992 for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and as directed.

S & F LED bollard lights nominal power 10 watt, pressure die-cast aluminium alloy housing with polyester powder coated, operational voltage of 170 volts to 270 volts, frequency of 50 Hz, lumen output of minimum 800, lumen efficacy of minimum 100 lumens per watt, built-in integrated electronic LED driver, output open /short circuit protection, phase to phase protection, over voltage protection, surge voltage protection upto 2 kVs, protection grade IP 65, CRI greater than 70, CW available CCT of 5700⁰K, power factor of minimum 0.95, life span of minimum 50000 working hours including fixing at any height and including wiring using three core PVC insulated, PVC sheathed, flexible stranded copper conductor FR-LSH cables suitable for outdoor use, 1.5 sqmm as per IS 694: 2010 complete all as specified and as directed.

S & F including testing LED batten light fitting 1 X 20 watt, 4 feet long with aluminium housing and polycarbonate diffuser complete with integrated LED driver suitable for fixation on wall/roof with robust body, corrosion resistant, flicker control, superior finish. The power factor should be more than 0.95, total harmonic distortion (THD) should be less than 20%, lumen efficacy should not be less than 100 lumens per watt, total input voltage range 140-280V AC, colour rendering Index should not be less than 80, corelated colour temperature should 5000⁰-6500⁰ Kelvin, including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S & F including testing LED batten light fitting 1 X 10 watt, 2 feet long with aluminium housing and polycarbonate diffuser, 2 feet long complete with integrated LED driver suitable for fixation on wall/roof with robust body, corrosion resistant, flicker control, superior finish. The power factor should be more than 0.95, total harmonic distortion (THD) should be less than 20%, lumen efficacy should not be less than 100 lumens per watt, total input voltage range 140-280V AC, colour rendering Index should not be less than 80, corelated colour temperature should 5000⁰-6500⁰ Kelvin, including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

M & L for earthing complete with galvanised steel plate earth electrode 600 mm X 600 mm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to earthing lead of 4.0 mm dia galvanised mild steel wire by means of bolts, nuts, check nuts and washers of galvanised iron from earth plate to test point upto 7.5 metre including all as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete chamber in cement concrete M15 (Nominal Mix) using 20 mm nominal size coarse aggregate, precast RCC cover slab in cement concrete M15 (Nominal mix) using 20 mm nominal size coarse aggregate of size 40 cm X 40 cm X 5 cm reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways with one handle for lifting made out of 8 mm dia bar, GI funnel, GI wire mesh filter, 20 mm dia GI pipe medium grade for watering, 20 mm dia GI pipe medium grade for protection of earthing lead, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil/ strata and testing complete all as specified and as directed.

M & L for earthing complete with galvanised steel plate earth electrode 600 mm X 600 mm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to earthing lead of 32 mm X 6 mm galvanised mild steel strip by means of bolts, nuts, check nuts and washers of galvanised iron from earth plate to test point upto 7.5 metre including all as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete chamber in cement concrete M15 (Nominal Mix) using 20 mm nominal size coarse aggregate, precast RCC cover slab in cement concrete M15 (Nominal mix) using 20 mm nominal size coarse aggregate of size 40 cm X 40 cm X 5 cm reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways with one handle for lifting made out of 8 mm dia bar, GI funnel, GI wire mesh filter, 20 mm dia GI pipe medium grade for watering, 40 mm dia GI pipe medium grade for protection of earthing lead, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil/ strata and testing complete all as specified and as directed.

M & L for earthing complete with galvanised steel pipe electrode 40 mm nominal bore, medium grade, 2.5 metre length buried directly in ground with top edge of the pipe not less than 1.25 metres below normal ground level, connected to earthing lead of 4.00 mm dia galvanised earth wire by means of bolts, nuts, check nuts and washers of galvanised iron from pipe electrode to test point upto 7.5 metre including all as shown in electrical plate No. 2 of SSR Part I (2009) including necessary concrete chamber in cement concrete M15 (Nominal Mix) using 20 mm nominal size coarse aggregate, precast RCC cover slab in cement concrete M15 (Nominal mix) using 20 mm nominal size coarse aggregate of size 40 cm X 40 cm X 5 cm reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways with one handle for lifting made out of 8 mm dia bar, GI funnel, GI wire mesh filter, 20 mm dia GI pipe medium grade for watering, 20 mm dia GI pipe medium grade for protection of earthing lead, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil/ strata and testing complete all as specified and as directed.

M & L for earthing complete with galvanised steel pipe electrode 40 mm nominal bore, medium grade, 10 metre length buried directly in ground with top edge of the pipe not less than 1.25 metres below normal ground level, connected to earthing lead of 32 mm X 6 mm copper strip by means of bolts, nuts, check nuts and washers of galvanised iron from earth plate to test point upto 7.5 metre including all as shown in electrical plate No. 2 of SSR Part I (2009) including necessary concrete chamber in cement concrete M15 (Nominal Mix) using 20 mm nominal size coarse aggregate, precast RCC cover slab in cement concrete M15 (Nominal mix) using 20 mm nominal size coarse aggregate of size 40 cm X 40 cm X 5 cm reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways with one handle for lifting made out of 8 mm dia bar, GI funnel, GI wire mesh filter, 20 mm dia GI pipe medium grade for watering, 20 mm dia GI pipe medium grade for protection of earthing lead, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil/ strata and testing complete all as specified and as directed.

M & L for earthing complete with galvanised steel pipe electrode 40 mm nominal bore, medium grade, 2.5 metre length buried directly in ground with top edge of the pipe not less than 1.25 metres below normal ground level, connected to earthing lead of 32 mm X 6 mm galvanised mild steel strip by means of bolts, nuts, check nuts and washers of galvanised iron from pipe electrode to test point upto 7.5 metre including all as shown in electrical plate No. 2 of SSR Part I (2009) including necessary concrete chamber in cement concrete M15 (Nominal Mix) using 20 mm nominal size coarse aggregate, precast RCC cover slab in cement concrete M15 (Nominal mix) using 20 mm nominal size coarse aggregate of size 40 cm X 40 cm X 5 cm reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways with one handle for lifting made out of 8 mm dia bar, GI funnel, GI wire mesh filter, 20 mm dia GI pipe medium grade for watering, 40 mm dia GI pipe medium grade for protection of earthing lead, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil/ strata and testing complete all as specified and as directed.

S & F blanking plate in DBs of MCB complete all as specified and as directed.

S & F integral post top lantern Black ABS plastic spigot, integral, ovoid shape post top lantern with clear / opal acrylic with single LED lamp 15 W including connection with armoured cable of size 2 core 6 sqmm from FRP junction box and testing commissioning complete.

M & L for auguring under road, pavement, hard standing, railway lines by trenchless technology using latest boring technique and necessary machine for insertion of GI/CI/PP-R/PVC pipe of any dia/ bore/size complete all as specified and as directed.

S & F pole mounted junction box, size 200 mm X 140 mm X 95 mm made out of FRP with weather proof hinge doors, locking arrangements,, horizontal/ vertical operated including MCB, four pole (FP) 6A 10 KA for connection of 4 core cable and including fixing to pole with suitable size flat iron clamp, nuts, bolts, washers etc. complete all as specified and as directed.

S & F submersible cable flat PVC insulation of type C and having PVC sheath of type ST2, flexible copper conductor, FR-LSH, 3 core of size 2.5 sqmm complete all as specified and as directed.

Dismantling existing LT feeder pillar box/ LT panel board of any type and size including recovering serviceable items including making good disturbed surfaces complete all as specified and as directed.

S & F MCCB rated current(In): 100A, ultimate short circuit breaking capacity (Icu): 16 kA, service short-circuit breaking capacity (Ics): 100% of Icu, impulse withstand voltage (Uimp): 8 kV, insulation voltage (Ui): 690 V, utilization category: A, pollution degree 3, degree of protection: IP40, adjustable thermal (80% to 100%) and adjustable magnetic (5-10 times) setting, four pole, suitable for 415 V, 50 Hz AC supply complete all as specified and as directed.

S & F vertical distribution board multi phase, double door, 4 way including MCCB (rated current(In): 125A, ultimate short circuit breaking capacity (Icu): 25 kA, service short-circuit breaking capacity (Ics): 100% of Icu, impulse withstand voltage (Uimp): 8 kV, insulation voltage (Ui): 690 V, utilization category: A, pollution degree 3, degree of protection: IP40, fixed thermal and fixed magnetic setting, four pole, suitable for 415 V, 50 Hz AC) as incoming and MCB (single pole (SPN), unenclosed, panel board type, screw type terminals for external copper conductors, C-type instantaneous tripping, rated voltage single phase, rated frequency 50 Hz, Rated current 6A to 32 A, Rated Short circuit capacity 10 kA, any type of fixation, Protection IP 20) as outgoing complete all as specified and as directed.

Supply and erect factory made 7 meter long hot dip galvanized (as per relevant IS with average coating thickness 65 micron) octagonal poles conform to IS-2062/ BSEN 10025 with 155 mm dia at bottom and 70 mm dia at top A/F made up of 3 mm thick HT sheet along with foundation type base plate of size 250 mm X 250 mm X 16 mm, foundation bolt 4 Nos of M20 X 600 mm high 'J' type EN8 grade, including 1 meter long hot dip galvanized single arm (swan neck) bracket made up of 40 NB dia GI pipe and including excavation, earth work, PCC (1:2:4) type B1 for foundation and grouting the bolts as per manufacturer’s instructions including marking pole number in letters & figures of size not less than 10 cm height with red colour enamel paint complete all as specified and as directed. Note: - (i) Srl number will be issued by Engineer-in-Charge.

Supply and fix metal oxide surge arrester without gap for AC system as per IEC 60099-4: 2014, outdoor type, polymer housing, single column and single phase construction, distribution class, medium duty, nominal discharge current 5 kA, repetitive charge transfer rating (Qrs) more than 0.2 C, thermal charge transfer rating (Qth) more than 0.7 C, nominal system voltage 11 kV, highest system voltage 12 kV, rated voltage of arrester 9 kV, continuous operating voltage 7.2 kV, temporary overvoltage (10.50 kV for 1 s, 9.90 kV for 10 s, 9.35 kV for 100 s), rated short circuit current 20 kA, low short circuit current 600 A, insulation withstand level (lightning impulse voltage 1.2/ 50 µs) 75 kV, lightning impulse residual voltage (8/20 µs) at nominal discharge current maximum 22 kV, high current impulse withstand capability (4/10 µs) 65 kA, minimum creepage distance 300 mm complete all as specified and as directed.

Supplying, installing, testing and commissioning automatic, servo controlled, indoor type, voltage stabilizer of capacity 1 kVA, single phase, IP55 protection, copper wound, naturally air cooled type, insulation class H, designed for input voltage of 160 V to 270 V and output voltage of 230 V ± 1%, voltage correction rate of 15 V per second, metallic body with lifting hook duly power coated, LCD display for Input and Output Voltage, frequency, current, Time Delay and Mains ON with under and over voltage protection, short circuit protection, surge protection all as per IS 8448: 1989 complete all as specified and as directed.

S & F telephone socket outlet including metal box complete all as specified and as directed.

S & F 1 pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed steel/ PVC conduit complete all as specified and as directed.

S & F television antenna socket outlet including metal box complete all as specified and as directed.

S & F co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit complete all as specified and as directed.

S & F LED bulb, System Wattage: 9 Watt, Rated Voltage: 230 Volt, Frequency: 50 Hertz, Operating Voltage Range: 170 to 270 Volt, System Current (mA): < 46, Power Factor: ≥ 0.98, System Lumen Efficacy (lumens/watt or lumens): 100, Total Harmonic Distortion (THD): ≤ 30 %, Color Rendering Index (CRI): ≥ 80, Driver Efficiency: ≥ 85 %, Ingress Protection: IP20, Correlated Color Temperature (CCT) (As per ANSI): 6500⁰ Kelvin, Mounting/Holder Type/Base cap: B22d, System Protections: Open & Short circuit protection, reverse polarity protection, surge protection of 2.5KV internal, Certification Standards: LM80, Conformity to Indian Standard: IS:16102 part I and Part II latest complete all as specified and as directed.

Supply, fixing and testing LED batten with battery/Invertor, LED Rating (in Watts)/System Wattage/Rated Power: 20 Watt, Rated Voltage & Frequency: 230V, 50Hz, Luminaire System Efficacy (Lumen/watt): 100, Operating Voltage Range: 140-280V, Power Factor: ≥0.95, Total Harmonic Distortion: ≤30%, Colour Rendering Index(CRI): ≥80, Colour Temperature: 5000⁰-6500⁰ Kelvin, Driver Efficiency: ≥85%, Emergency Time: 3 hour, Ingress Protection: IP-20, Type of Control Gears: Electronic, Working life for LED (as per LM-80 and LM 21 reports): ≥50000 hours, Housing Material: Aluminium Extruded, Front Cover Material: Polycarbonate, Surge Protection of 3.0 kV Internal: Yes, Open & Short Circuit Protection: Yes, Reverse Polarity Protection: Yes, Battery Type: Li-Ion, Battery Backup (in Hours): 3, Emergency Light Output (Lumen %): 50, including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Material and labour for construction and laying of kerb of size as directed directly on the road construction site with automatic kerb casting machine (kerb/divider making/laying machine), using M25 (Design Mix) grade cement concrete laid in position to the required line, level and curvature kerb stone cast continuous and making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm) at a distance as directed, including making drainage opening wherever required, including necessary excavation/earth work and making good disturbed surface complete all as specified and as directed.

Supply, install, testing and commissioning of openwell submersible pump of SS body, single phase, Voltage range 240 V, 50 Hz, Speed 2800 rpm, Head 12-18 meter, discharge 0.45-1.8 lps, Size 25mm X 25 mm with all necessary accessories required for fixing as directed by Engineer in charge.

Supply, fixing and testing Post lantern hanging type 60 watt IP 65 pro, PF greater than 90, 100 lumen/watt with high efficiency, LED, THD-10% Potted driver with 4/6 KVA surge protection decorative suspended mounting light decorative luminaire consisting old body made out of cast & spun aluminium having 370 X 370 mm and height 700 mm with IP65 Optical compartment, lower bowl in UV stabilized frosted acrylic but in conical shape, integral control gear having BIS approved Fulhan make ecectonic constant current driver and LM80 compliance seoul/bridgelux Make LED module with T3 street light photometry lenses in 60w complete with all accessories from opening PC diffuser suitable for above mentioned arm brackets and poles.

M & L Decorative LED post top lantern (PTL) luminaire with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acrylic diffuser LED light fitting of 25 watt including LED lamp complete all as specified & directed.

Supply and fixing of 18 watt Submersible LED(RGB) based decorative fountain light with colour changing facility, made out of die cast stainless steel (304 grade), emitter type power LEDs with all-in-one optical lens of efficiency 85%, step tempered glass of 8 mm thick with protection class of IP68 , including connection and waterproof jointing etc., as required for fixing complete all as specified and as directed.

Supplying and fixing of fountain LED light controller assembly consists of 12 V constant voltage driver ,10 A DMX controller with SMPS and power contractor, including the control circuit wiring with 1.5 Sqmm FR-LSH PVC insulated flexible copper wire , MCB etc., as required complete all as specified and as directed.

M & L for Durastone coloured vitrified tiles (digital) heavy duty of size 300 mm x 300 mm x 10 mm thick as in floors complete all as specified and as directed.

Supply and fix Flox Pole 4 metre height made up of GI Pipe designed sections with Aluminium casting at joints and control box at the bottom of the pole for space for housing MCB & terminal strip etc. with separate sections and minimum lower section dia 115 mm x 3.6 mm Polyurethane resin coating as per colour shade approved by the GE and suitable grooves/ special technique for mounting designed arms at least width 600 mm and 45 mm round shape with base plate, screw, nuts & bolts complete foundation and coping. Make: Jaquar/ Bajaj/ CROMPTON GREAVES

Supply, fixing and testing LED Macro colour flood light luminaire offered in multiple colours, pressure die cast aluminium body and clear PC cover, standard beam angle of 30 degree Aesthetic consistency in multipurpose application like building statue etc. of 75 Watts.

S & F LED Bollard Vertical Cone 10W warm white Features: Die cast aluminium housing Opal diffuser with in-built LED 140 V - 270 V AC, IP65 protection including mounting pole of size Ø125 mm X 600 mm X Ø140 mm as per Model No. OBL-GRY-LBLDCON010XW of Jaquar or equivalent of Make mentioned under Appendix "B" complete all as specified and as directed.

S & F factory made epoxy powder coated Distribution Board TPN 4 ways ( VTPN MCCB DB ) and space for MCCB 160 Amp as incomer, with metal door (IP54 protection ) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including isolated neutral bar, insulated busbar assembly, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts including taking down old unserviceable VTPN DB complete all as specified and as directed. Note: - MCCB shall be measured and paid for separately.

S&F stainless steel 304 grade 1.6 mm thick SS sheet cascade fountain waterfall of Size 1.2 X 0.10 X 0.15 m and nozzle 1.5 inch with complete accessories all as per manufacturer’s instructions and as directed by Engineer in charge Note: The sample shall be approved by GE before placing the order

Supply and stacking of well decomposed Cow dung/ meegni manure including royalty, loading, unloading, transportation and stacking etc. at site. Note:- For the purpose of payment the stack measurement shall be reduced by 10% for voids.

M & L for preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete all as specified and as directed. Note: Cost of sludge, manure or extra earth to be paid for separately.

M& L for plantation of shrubs, hedge etc. at the site including watering and removal of unserviceable material including shrub/ hedge plants of any type and of height 60-75 cm in earthen pots of size 20 cm complete all as specified and as directed.

S&F stainless steel 304 grade 1.6 mm thick SS sheet cascade fountain waterfall of Size 1.5 X 0.10 X 0.15 m and nozzle 1.5 inch with complete accessories all as per manufacturer’s instructions and as directed by Engineer in charge Note: The sample shall be approved by GE before placing the order

Supply, testing, commissioning and Installation of Compact substation comprising 11 KV, RMU 630 Amps , 250 KVA copper wound ONAN, off circuit Transformer with LT side MCCB as below:- HT Section :- Three way 11 KV, 630 Amp, 21 KA for 3 sec. SF 6 insulated one sided extensible, outdoor compact switchgear consisting of one Nos of motorised vacuum circuit breaker in SF6 insulated stainless steel enclosure with two Nos LBS series trip, self-powered microprocessor based numerical over current and earth fault relay with LCD display for relay setting and internal battery backup along with interconnection between HT switchgear and transformer shall be using suitable size XLPE cable including CT & PT's units complete all as specified & as directed. Detailed specification:- (i) Enclosure - IP-54 (ii) Rated Voltage- 11KV (iii) Rated power frequency withstand voltage - 28KV (iv) Rated lightening impulse withstand voltage - 75 KV (v) Altitude upto 1000 mtr (vi) Rated current RMU Bus bar and feeder- 630A @40 Deg / 600A @45deg/565A@50Deg. (vii) Rated short-time current- 21KA/3 sec (viii) Rated Short-making current-52.5KA (ix) Design ambient temperature-40 Deg (x) internal arc-21KA/1 sec (xi) Copper Bus bar Each VCB includes: (i) Motorised VCB with position ON-OFF (ii) Manual Bus side disconnected with three position switches ON-OFF-Earth (iii) Self powered relay for over current & earth fault protection with RS485 port suitable for SCADA connectivity MODBUS. (iv) Mechanical indicators for positions ON-OFF-Earth (v) Mimic diagram at the front facia of RMU (vi) 3x2core CT (100-50/1A, class 5P10& class 0.5, 2.5VA) (vii) Fixed capacitive voltage Indicator (viii) Pad locking facility (ix) Provision for connecting suitable size 3C cable. Metering Panel includes: (i) Aux Transformer-11KV/root3/415V/Root3,500VA,3.15A (ii) Battery and Charger as per OEM recommendation.

Srl Item No 16.08 Continued...... Transformer Section:- Supplying, installing, connecting, testing & commissioning mineral oil immersed, natural air-cooled, outdoor type, double wound (copper) distribution transformer, three phase, 250 kVA rating, non-sealed type, 50 Hz rated frequency, 11 kV high voltage and 415 V low voltage nominal system voltage, minimum 75 kVp basic insulation level, 11000 V/ 433-250 V no-load voltage ratio, connection (vector) symbol Dyn11, 30⁰ positive phase displacement, off circuit tap changing arrangement for voltage variations of +5% to -10% in steps of 2.5% for variation of HV, minimum energy efficiency level 2 (Star 2 as per the notification issued by the Central Government, in consultation with the Bureau of Energy Efficiency and including all the amendments issued up-to-date), 4.5% impedance, ONAN type cooling all as per IS-1180 (Part 1): 2014 including amendment upto and including amendment No. 4 dated 04 Mar 2021 complete with all fittings, accessories and item as specified and as directed. Note: - The energy efficiency level higher than the minimum energy efficiency level as specified here shall be provided without any extra cost in case the transformer of minimum energy efficiency level is not available. LV side Outgoing:- (i) 63 Amps 4 Pole, 25 KA MCCB – 07 Nos with Thermal magnetic based release with O/L,S/C & E/F protection – RYB indication lamp with Ammeter, voltmeter and all accessories. (ii) MCB TPN 32 Amps, C Series – 02 Nos. CSS ENCLOSURE:-

Supply, testing, commissioning and Installation of Compact substation comprising 11 KV, RMU 630 Amps , 250 KVA copper wound ONAN, off circuit Transformer with LT side MCCB as below:- HT Section :- Three way 11KV, 630 Amp, 21 KA for 3 sec. SF6 insulated one sided extensible, outdoor compact switchgear consisting of one Nos of motorised vacuum circuit breaker in SF6 insulated stainless steel enclosure with two Nos LBS series trip, self-powered microprocessor based numerical over current and earth fault relay with LCD display for relay setting and internal battery backup along with interconnection between HT switchgear and transformer shall be using suitable size XLPE cable including CT & PT's units complete all as specified & as directed. Detailed specification:- (i) Enclosure - IP-54 (ii) Rated Voltage- 11KV (iii) Rated power frequency withstand voltage - 28KV (iv) Rated lightening impulse withstand voltage - 75 KV (v) Altitude upto 1000 mtr (vi) Rated current RMU Bus bar and feeder-630A@40 Deg/600A@45deg/565A@50Deg. (vii) Rated short-time current- 21KA/3 sec (viii) Rated Short-making current-52.5KA (ix) Design ambient temperature-40 Deg (x) internal arc-21KA/1 sec (xi) Copper Bus bar Each VCB includes: (i) Motorised VCB with position ON-OFF (ii) Manual Bus side disconnected with three position switches ON-OFF-Earth (iii) Self powered relay for over current & earth fault protection with RS485 port suitable for SCADA connectivity MODBUS. (iv) Mechanical indicators for positions ON-OFF-Earth (v) Mimic diagram at the front facia of RMU (vi) 3x2core CT (100-50/1A, class 5P10& class 0.5, 2.5VA) (vii) Fixed capacitive voltage Indicator (viii) Pad locking facility (ix) Provision for connecting suitable size 3C cable. Metering Panel includes: (i) Aux Transformer-11KV/root3/415V/Root3,500VA,3.15A (ii) Battery and Charger as per OEM recommendation.

Srl Item No 16.081 Continued...... Transformer Section:- Supplying, installing, connecting, testing & commissioning mineral oil immersed, natural air-cooled, outdoor type, double wound (copper) distribution transformer, three phase, 250 kVA rating, non-sealed type, 50 Hz rated frequency, 11 kV high voltage and 415 V low voltage nominal system voltage, minimum 75 kVp basic insulation level, 11000 V/ 433-250 V no-load voltage ratio, connection (vector) symbol Dyn11, 30⁰ positive phase displacement, off circuit tap changing arrangement for voltage variations of +5% to -10% in steps of 2.5% for variation of HV, minimum energy efficiency level 2 (Star 2 as per the notification issued by the Central Government, in consultation with the Bureau of Energy Efficiency and including all the amendments issued up-to-date), 4.5% impedance, ONAN type cooling all as per IS-1180 (Part 1): 2014 including amendment upto and including amendment No. 4 dated 04 Mar 2021 complete with all fittings, accessories and item as specified and as directed. Note: - The energy efficiency level higher than the minimum energy efficiency level as specified here shall be provided without any extra cost in case the transformer of minimum energy efficiency level is not available. LV side Incomer:- (a) S&F MCCB 4 Pole 350 Amps, 25 KA 415 Volt microprocessor release draw out type - 01 No. (b) Aluminium Bulbar 500 Amps current rating duly sleeve insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCB/MCCBs-01Set

Srl Item No 16.081 Continued...... NOTE:-1) As per clause 7.102 of IEC 62271-202-2022 internal arc test in transformer chamber is must, it should be 20KA for 1 Sec type A & type B.2) Interconnection between HT breaker and transformer through HT cable 95sqmm also interconnection between transformer and LT panel through suitable size of aluminium bus bar.

Supply, install, testing and commissioning of openwell submersible pump of SS body, single phase, Voltage range 240 V, 50 Hz, Speed 2800 rpm, Head 18-32 meter, discharge 0.3-2.2 lps, Size 25mm X 25 mm with all necessary accessories required for fixing as directed by Engineer in charge.

Supply and laying double wall corrugated pipe (DWC), non-metallic, Resistance to Compression : Type 450, Resistance to Impact: Normal, Resistance to Bending : Pliable, Resistance to External Influence: Ingress Protection : IP 67, Resistance against Corrosion : Without Protection, Resistance to Flame Propagation : Non Flame Propagating, Nominal outside diameter 75 mm, minimum inside dia 56 mm conforming to IS 16205 (Part 24) : 2017 complete all as specified and as directed.

Supply and laying double wall corrugated pipe (DWC), non-metallic, Resistance to Compression : Type 450, Resistance to Impact: Normal, Resistance to Bending : Pliable, Resistance to External Influence: Ingress Protection : IP 67, Resistance against Corrosion : Without Protection, Resistance to Flame Propagation : Non Flame Propagating, Nominal outside diameter 90 mm, minimum inside dia 67 mm conforming to IS 16205 (Part 24) : 2017 complete all as specified and as directed.

Supply and laying double wall corrugated pipe (DWC), non-metallic, Resistance to Compression : Type 450, Resistance to Impact: Normal, Resistance to Bending : Pliable, Resistance to External Influence: Ingress Protection : IP 67, Resistance against Corrosion : Without Protection, Resistance to Flame Propagation : Non Flame Propagating, Nominal outside diameter 110 mm, minimum inside dia 82 mm conforming to IS 16205 (Part 24) : 2017 complete all as specified and as directed.

Supply and laying double wall corrugated pipe (DWC), non-metallic, Resistance to Compression : Type 450, Resistance to Impact: Normal, Resistance to Bending : Pliable, Resistance to External Influence: Ingress Protection : IP 67, Resistance against Corrosion : Without Protection, Resistance to Flame Propagation : Non Flame Propagating, Nominal outside diameter 120 mm, minimum inside dia 90 mm conforming to IS 16205 (Part 24) : 2017 complete all as specified and as directed.

Supply and fixing of 18 watt Submersible LED(RGB) based decorative fountain light with colour changing facility, made out of die cast stainless steel (304 grade), emitter type power LEDs with all-in-one optical lens of efficiency 85%, step tempered glass of 8mm thickness with protection class of IP-68, including connection and waterproof jointing etc, as required for fixing as directed by Engr-in charge.

Supply and fixing of fountain LED light controller assembly consists of 12 V constant voltage driver ,10 A DMX controller with SMPS and power contractor, including the control circuit wiring with 1.5 Sqmm FRLS PVC insulated flexible copper wire, MCB Etc., as required for fixing as directed by Engr-in charge.

Supply and fixing of waterproof IP 67 neon flex LED strip lights ice blue, 120 high quality LEDs arrange every 3.3 ft deliver well balanced flicker free lighting over a 160-degree beam angle, the size of flexible neon light strip is 8 x 12 mm covered by high quality silicon tube, very thin, light, soft and waterproof besides it can be cut after every 1 meter, including 12 volt adapter and 2 pin connector etc, as required for fixing as directed by Engr-In-Charge.

Complete maintenance after physical completion of plants/Hedge/grass by weeding hosing, saucer making once in every week for plants/Hedge once in every 10 days for carpet grass/country grass/doob grass, burmuda grass, prunning dried branches once in every week, depositing the material at place as directed by Engr-In-Charge and planting the new plants in place of dead plants of same species and height tuning with dods wherever required by replacing the dead patches of grass with the same grass as required without extra cost to the deptt and all as directed by Engr-In-Charge. Note:(i) Manure and pesticide required for maintenance of plant under this items shall be arranged by the contractor at his own cost and rate of the same shall be deemed to be included in the unit rate quoted against this items (ii) Scope of maintenance shall be as specified in Ph-II. (iii) Work against this item will be commenced only after completion of plantation of trees, plantation of grass and plantation of hedge & shrubbery.

Supply and fix Y Type Strainer of size 25 mm small resistance drip system pressure regulator all as specified and directed by Engr-In-Charge.

Supply and laying 3 layer PPR perforated pipe suitable for drip irrigation hole at a distance of 45 cm with end cap as required at site including all PPR palin & brass threaded polypropylene random fittings required for size 16mm dia with complete fittings as specified and directed by Engr-In-Charge.

Supply and fix Sprinkler set 2 feet height, 3.2 Kgs, L clamp with adopters, bends, tees of 25mm dia bore with all connected accessories as specified and directed by Engr-In-Charge.

Srl Item No 16.095 Continued...... (c) LED indicating lamps – 3 Nos (d) Danger Notice Plate for LT (F) 3 Phase, 5 kW automatic street light control switch using infrared sensor based twilight/ nature switch for automatic switching of streetlights, consisting of weatherproof powder coated metal box of suitable size, 1 No of twilight/ nature switch dusk to dawn, 25 Amps 3 pole contactor- 1 No, 20 Amps MCB- 6 Nos (3 Nos input and 3 Nos output) including wiring with 10 sqmm copper wiring, IP54 protection grade- 2 Nos (G) The rate quoted by tenderer also includes to fix the legs of the panel box in cement concrete M15(Nominal mix) using 20 mm nominal size graded crushed stone aggregate 30 cm below GL and the box will be kept nearly 45 cm above GL including earthwork and allied services complete. The legs of the box will be of 50 mm X 50 mm X 6 mm of length 750 mm

Srl Item No 16.096 Continued...... (d) Danger Notice Plate for LT (F) The rate quoted by tenderer also includes to fix the legs of the panel box in cement concrete M15(Nominal mix) using 20 mm nominal size graded crushed stone aggregate 30 cm below GL and the box will be kept nearly 45 cm above GL including earthwork and allied services complete. The legs of the box will be of 50 mm X 50 mm X 6 mm of length 750 mm

Supplying, installing, testing and commissioning factory made, CPRI approved, outdoor type, floor mounting LT panel board of adequate size, made of cold rolled close annealed sheet of 3 mm thick with 50 mm X 50 mm X 6 mm angle iron frame works, powder coated, dust & vermin proof, front and rear openable, double doors, compartmentalized, Form 4b construction, conforming to IS/IEC 61439 (Part 0 to 7), locking arrangements, suitable for 240 V, including wiring with single core PVC power cable of suitable size and including mounting on angle iron frame made using angle iron 50 mm X 50 mm X 6 mm complete all as specified and as directed and shall be comprising the followings: - (A) Wiring with single core PVC, copper power cable of suitable size (B) Incoming: (a) MCB, SPN, 10 kA, C-type, rated current 40 A: -1 No (C) Outgoing: (a) MCB, SP, 10 kA, C-type, rated current 20 A: -1 No (b) MCB, SP, 10 kA, C-type, rated current 10 A: -2 Nos (c) heavy duty metal direct online starter single phase 1 Hp motor starter ideal for Open well submersible pump -01 No (D) Accessories: (a) LED indicating lamps – 3 Nos (b) Danger Notice Plate for LT (E) The rate quoted by tenderer also includes to fix the legs of the panel box in cement concrete M15(Nominal mix) using 20 mm nominal size graded crushed stone aggregate 30 cm below GL and the box will be kept nearly 45 cm above GL including earthwork and allied services complete. The legs of the box will be of 50 mm X 50 mm X 6 mm of length 750 mm

Srl Item No 16.098 Continued...... (c) LED indicating lamps – 4 Nos (d) Danger Notice Plate for LT (F) 3 Phase, 5 kW automatic street light control switch using infrared sensor based twilight/ nature switch for automatic switching of streetlights, consisting of weatherproof powder coated metal box of suitable size, 1 No of twilight/ nature switch dusk to dawn, 25 Amps 3 pole contactor- 1 No, 20 Amps MCB- 6 Nos (3 Nos input and 3 Nos output) including wiring with 10 sqmm copper wiring, IP54 protection grade- 2 Nos (G) The rate quoted by tenderer also includes to fix the legs of the panel box in cement concrete M15(Nominal mix) using 20 mm nominal size graded crushed stone aggregate 30 cm below GL and the box will be kept nearly 45 cm above GL including earthwork and allied services complete. The legs of the box will be of 50 mm X 50 mm X 6 mm of length 750 mm.)

S & F LED street light fitting of 60 W (sunbeam sensor light, photo sensor) pressure die cast aluminium housing/body, heat resistant clear toughened glass, better optics for uniform distribution street/Roadway luminaire, with driver complete fitting with all accessories and following specifications including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed. (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range: 140 to 270 volts (c) Temp operating range: Minus 10°C to Plus 50°C (d) Power factor: Minimum 0.95 (e) THD: Max10%. (f) IP rating: Minimum IP66. (g) IK rating: Minimum IK07 (h) Built in potted LED Driver of the make as of the luminaire. (j) LED driver should be complete with all protections viz. open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Surge protection 10 Kv (inbuilt + extended) (l) CCT: 5000 K. (m) CRI: More than 80 (n) Lens - High Efficiency wide angle lens. (o) BIS Approved fixtures and driver (p) Rated life time: 50000 burning hrs @L70 (Average 10 to 12 hrs daily)

ASHISH JINDAL BUILDERS PVT. LTD. (BID ID -3504140)

SOM BUILDERS (BID ID -3510955)