REPAIR POLISHING OF WOODEN FURNITURE AND RECANNING OF DIFFERENT TYPE OF CHAIRS FIXING OF PLY TOP AND REPAIR PAINTING REPLACEMENT OF STEEL FURNITURE AND FIXING OF PLY TOP ON DIFFRENT TYPE OF CHARPOY BED HARD AND TABLE TOP UNDER BSO OF GE AF GURGAON

Amount

Chair Dining FD 279 & 1105: Repair to chair Dining including dismantling of old parts and replace with new parts made out of well seasoned teak wood as mentioned below. The entire chair shall be polished with French polish in original shade after properly smoothening the surface with emery paper and apply wooden putty to fill up the gaps and cracks. All other work as specified and as directed by Engineer - in - Charge.

Front Leg

Rear Leg

Stiffner

Stiffner H type

Side and back rail with drill canning hole suitable for 2mm thick cane

Recaning of chair dining with 2mm wide half round cane plastic white in Godrej pattern with border of 3mm wide cane plastic, cane shall be of premier/ajay brand complete all as specified and as directed

Bed Hard Ply Top ( Drg No FD-246): Repair to Bed hard ply top with repairs/replacement of the following components and the bed shall be set right and the entire bed shall be polished with French polish in original teak shade after properly preparation of surface by applying putty and smoothened with emery paper.

Removing unserviceable plywood from outer sides of Head rest of Bed Hard and Supply and fixing new 3.5 mm thick plywood one side teak veneered finish of Head Rest by means of best quality adhesive including 4mm thick Ist class hard wood teak edging complete all shown on drg complete all as specified and as directed

Removing unserviceable plywood from inner sides of Head rest of Bed Hard and Supply and fixing new 3.5 mm thick plywood one side teak veneered finish of Head Rest by means of best quality adhesive including 4mm thick Ist class hard wood teak edging complete all shown on drg complete all as specified and as directed

Removing unserviceable plywood from outer sides of Foot rest of Bed Hard and Supply and fixing new 3.5 mm thick plywood one side teak veneered finish of Foot Rest by means of best quality adhesive including 4mm thick Ist class hard wood teak edging complete all shown on drg complete all as specified and as directed

Removing unserviceable plywood from inner sides of Foot rest of Bed Hard and Supply and fixing new 3.5 mm thick plywood one side teak veneered finish of Foot Rest by means of best quality adhesive including 4mm thick Ist class hard wood teak edging complete all shown on drg complete all as specified and as directed

Replacement of top ply:- Removing unserviceable ply top from Bed Hard Top and S&F of new ply wood top shall be 12mm thick BWR Grade commercial face veneers on both side fixed with screws complete all as shown on drg and complete all as specified and as directed. Make: Greenply Duro or Archid with ISI Marked.

Replacement of legs Taking out unserviceable legs from Bed Hard and S&F new leg made out of 1st class hard wood teak as per existing shape and size as shown on drg complete all as specified and as directed

Replacement of Long Rails: Taking out unserviceable/broken long rails from Bed Hard and S&F new long rail as per existing shape and size made out of well seasoned teak wood free from knot and cracks as per existing shape, design and size all as shown on drg complete all as specified and as directed

Replacement of stiffner : Taking out broken stiffner and S&F new stiffner made out of teak wood as per existing shape, design and size all as shown on drg complete all as specified and as directed

Table 900x600x760mm with out drawer (Drg No. FD-223 & 284): Repair to table including dismantling of old broken parts and replace with new parts as mentioned below. Table shall be set right by providing 75x75mm teak wood triangular corner between rails and legs. The entire table shall be polished with French polish in original teak shade after proper preparation of surface by applying putty and smoothened with emery paper.

Taking out unserviceable top, supply and fixing of new top of pre-laminated particle board 18mm exterior grade BWR with all round 4mm thick teak wood beading as per Drg.

Taking out UNSV leg, supply and fixing of new leg of first class sheesham wood, as per Drg.

Taking out UNSV top long rail, supply and fixing of new top long of first class sheesham wood, as per Drg.

Taking out UNSV short rail, supply and fixing of new top short rail of first class sheesham wood, as per Drg.

Taking out unserviceable stiffener, supply and fixing of new "H" Type stiffener complete of first class sheesham wood, as per Drg.

Taking out old UNSV PVC shoes and , supply and fixing of new PVC shoes with steel screw superior quality as approved by Engr-in-Charge.

Table Dining 6 Persons (Drg No. FD-273 & 239): Repair to table including dismantling of old broken parts and replace with new parts as mentioned below. Table shall be set right by providing 100mmx100mm teak wood triangular corner between rails and legs. The entire table shall be polished with French polish in original teak shade after properly preparation of surface by applying putty and smoothened with emery paper.

Taking out unserviceable top of table dining 6 pers, supply and fixing of new top of pre-laminated particle board 18mm exterior grade with 4mm thick teak wood beading all round as per Drg.

Taking out UNSV leg, supply and fixing of new leg of first class teak wood, as per Drg.

Taking out UNSV top long rail, supply and fixing of new top long rail of first class teak wood, as per Drg.

Taking out UNSV top short rail, supply and fixing of new top short rail of first class teak wood, as per Drg.

Taking out old UNSV PVC shoes and , supply and fixing of new PVC shoes with steel screw superior quality as approved by Engr-in-Charge.

Table dressing Ladies (Drg No. FD-251): Repair to table including dismantling of old broken parts and replace with new parts as mentioned below. Table shall be set right and entire table shall be polished with French polish in original teak shade after properly preparation of surface by applying putty and smoothened with emery paper. Rest all as directed by Engr-in-charge. Note : New parts as mentioned below shall be measured and paid separately.

Taking out unserviceable top table dressing Ladies and supply and fixing of new top made out of pre-laminated particle board 18mm exterior grade as per Drg.

Taking out unserviceable bottom of table dressing Ladies, supply and fixing of new bottom made out of 18/19 mm block board commercial BWR. Type exterior gde as per Drg.

Taking out unserviceable legs of talbe dressing ladies, supply and fixing of new legs made out of first class teak wood.

Taking out unserviceable drawer, supply and fixing of new drawer of teak wood except bottom with knob 25mm. Bottom shall be 6mm ply wood commercial. Front portion of drawer shall be made out of pre-laminated particle board 18mm with anodize copper plated knob.

Supply of looking mirror 5mm thick superior quality make saint Gobin/Modigaurd with teak wood frame and ply wook 6mm thick commercial quality on back complete as per Drg.

Taking out UNSV/broken sliding glass, Supply and fixing of new sliding glass shutter 5mm thick dully rounded edges complete as per Drg.

Taking out UNSV aluminium channel, Supply and fixing of new aluminium channel as per Drg.

Taking out back side plywood and Supply and fixing of new ply wood commercial 12 mm as per Drg.

Table Center (Drg No. FD-274 & 235): Repair to table including dismantling of old broken parts and replace with new parts as mentioned below. Table shall be set right and the entire table shoud be polished with French polish in original teak shade after properly preparation of surface by applying putty and smoothened with Emery paper. Rest all as directed by Engr-in-charge. Note : New parts as mentioned below shall be measured and paid separately.

Taking out unserviceable top of table centre, supply and fixing of new top of pre-laminated particle board 18mm exterior grade BWR with all round 4mm thick teak wood beading as per Drg.

Taking out UNSV leg, supply and fixing of new leg of first class teak wood, as per Drg.

Taking out UNSV top long rail, supply and fixing of new top long rail of first class teak wood, as per Drg.

Taking out UNSV top short rail, supply and fixing of new top short rail of first class teak wood, as per Drg.

Taking out unserviceable stiffener, supply and fixing of new "H" Type stiffener complete of first class teak wood, as per Drg.

Taking out old UNSV PVC shoes and , supply and fixing of new PVC shoes with steel screw superior quality as approved by Engr-in-Charge.

Teapoy (Drg No. FD-278&232): Repair to teapoy including dismantling of old broken parts and replace with new parts as mentioned below. Teapoy shall be repolished with French polish in original teak shade after properly preparation of surface by applying putty and smoothened with ambry pape. Rest all as directed by Engr-in-charge. Note : New parts as mentioned here in after shall be measured and paid separately as supply only.

Taking out unserviceable top, supply and fixing of new top of pre-laminated particle board 18mm exterior grade with all round 4mm thick teak wood beading as per Drg.

Taking out UNSV leg, supply and fixing of new leg of first class teak wood, as per Drg.

Taking out UNSV top long rail, supply and fixing of new top long rail of first class teak wood, as per Drg.

Taking out UNSV top short rail, supply and fixing of new top short rail of first class teak wood, as per Drg.

Taking out unserviceable stiffener, supply and fixing of new "H" Type stiffener complete of first class teak wood, as per Drg.

Taking out old UNSV PVC shoes and , supply and fixing of new PVC shoes with steel screw superior quality as approved by Engr-in-Charge.

Peg Table (Drg No. FD-235): Taking out unserviceable top, supply and fixing of new top of pre-laminated particle board 18mm exterior grade BWR with all round 4mm thick teak wood beading as per Drg.

Taking out UNSV leg, supply and fixing of new leg of first class teak wood, as per Drg.

Taking out UNSV top long rail, supply and fixing of new top long rail of first class teak wood, as per Drg.

Taking out UNSV top short rail, supply and fixing of new top short rail of first class teak wood, as per Drg.

Taking out unserviceable stiffener , supply and fixing of new stiffener complete of first class hard wood teak as per Drg

Taking out old UNSV PVC shoes and , supply and fixing of new PVC shoes with steel screw superior quality as approved by Engr-in-Charge.

The entire peg table shall be polished with French polish after replacement of above components.

Table writing (Drg No. FD-275): Taking out unserviceable top of table writing, supply and fixing of new top of pre-laminated particle board 18mm exterior grade BWR with all round 4mm thick teak wood beading as per Drg.

Taking out UNSV leg, supply and fixing of new leg of first class teak wood, as per Drg.

Taking out UNSV top long rail, supply and fixing of new top long rail of first class teak wood, as per Drg.

Taking out UNSV top short rail, supply and fixing of new top short rail of first class teak wood, as per Drg.

Taking out unserviceable drawer, supply and fixing of new drawer of deodar wood except bottom. Which shall be of 6mm ply wood commercial. Front portion of drawer shall be of teak wood with anodize knob.

Taking out unserviceable cub board of table writing, supply and fixing of new cub board with shutter as per Drg.

Taking out unserviceable shutter, supply and fixing of new shutter of table writing made of pre-laminated particle board exterior grade 18mm as per grade.

Taking out unserviceable stiffener, supply and fixing of new stiffener complete of first class teak wood as per Drg.

Taking out old UNSV PVC shoes and supply and fixing of new PVC shoes with steel screw superior quality as per approved by Engr-in-Chage.

The entire table shall be pollshed with French polish after replacement of above components.

Hat Stand : . Taking out unserviceable looking mirror of hat stand , supply and fixing of new mirror electro copper plated 5mm thick.

Taking out unserviceable peg of hat stand , supply and fixing of new peg CP brass 120x75mm as per Drg.

The entire hat stand shoud be polished with French polish after replacement of above components .

Table dining 1200x900mm (Drg No.FD/MAP-II/03): Repair to table including dismantling of old broken parts and replace with new parts as mentioned below. The entire table shall be repolished with French polish in original teak shade after properly preparation of surface by applying putty and smoothened with emery paper.

Taking out unserviceable top , supply and fixing of new top of pre-laminated particle board 18mm exterior grade BWR with all round 4mm thick teak wood beading as per Drg.

Taking out UNSV leg, supply and fixing of new leg of first class teak wood, as per Drg.

Taking out UNSV top long rail, supply and fixing of new top long rail of first class teak wood, as per Drg.

Taking out UNSV top short rail, supply and fixing of new top long rail of first class teak wood, as per Drg.

Chair computer FD/E6/MAP/01: Taking out unserviceable seat and back of chair computer, supply and fixing of new seat and back 50mm foam cushion for seat, 50mm foam cushion for back covered with teapastry cloth as approved by Engr-in-charge complete all as specified and as directed.

Removing old unserviceable coaster wheel and S&F new coaster wheels of chair computer complete all as specified and as directed.

Removing old unserviceable base and S&F new Base of Godrej/Newage complete all as specified and as directed.

Removing old hydraulic system and S&F new hydraulic system complete all as specified and as directed.

Removing old unserviceable handles and S&F new handles complete all as specified and as directed.

Table bed side Drg No. FD/E6/MAP/15 ( R) : Taking out unserviceable top of table bed side, supply and fixing of new top made out of pre-laminated particle board 18mm exterior grade as per Drg.

Taking out unserviceable left/right sides of table bed side, supply and fixing of new right/left side of table bed side made out of pre-laminated particle board 18mm exterior grade.

Taking out unserviceable bottom of table bed side, supply and fixing of new bottom of made out of pre-laminated particle board 18mm exterior grade.

Taking out unserviceable partition of table bed side, supply and fixing of new partition of 6mm ply wood cpmmrcial as per Drg.

Taking out unserviceable handles of table bed side, supply and fixing of new handles superior quality as approved by Engr-in-charge.

Sofa Set 5 Seater (Drg No FD/E6/MAP-II/02, FD-373 and FD-281): Repair to sofa sets including dismantling of old back and seat cushions and replace with new back and seat cushions. 'Cool' Foam of 100mm thick 40 density shall be fixed on back and seat covered with tapestry cloth of superior quality as approved by GE, cost shall not be less than Rs 200/- per mtr. The size of the 'Cool' foam seat and back shall be 530mmx500mm of make Sleepwell or Kurlon. Wooden frame of sofa set shall be set right and polished after repair in original teak shade. The under mentioned unserviceable/broken parts/components of the Sofa set shall be taking out and supply and fixing new parts/components made out of well seasoned teak wood free from knots and cracks as per existing shape, design and size all as shown on drg complete all as specified and as directed. Note : One Sofa set 5 Seater means One 03 Seater & 2 Single Seater One Set Cushion denotes 10 Pieces of Cushion (5 backs & 5 Seats)

Long rail

Short rail

Rear leg

Handle/Arms

Chair Easy FD-229: Repair to chair easy including dismantling of old parts and replace with new parts made out of well seasoned teak wood as mentioned below and setting right all other existing parts. The entire chair shall be polished with French polish in original shade after properly removing the old existing polish and smoothening the surface with emery paper and apply wooden putty to fill up the gaps and cracks complete all as specified and as directed.

Front Leg

Rear leg

Stiffner

Side/back rail with duly drill holes for 2 mm caning

Recaning of chair easy with 2mm wide half round cane plastic white in Godrej pattern with border of 3mm wide cane plastic, cane shall be of premier/ajay brand complete all as specified and as directed

Dressing mirror FD/E6/MAP/16 : . Repair to dressing mirror including dismantling of old broken parts and replace with new parts as mentioned below. Dressing mirror shall be set right and repolished with French polish in original teak shade after properly preparation of surface by applying putty and smoothened with ambry paper.Rest all as directed by Engr-in-charge.

Taking out unserviceable mirror, supply and fixing of new Electro copper plated mirror 5.5mm thick with teak wood frame as per Drg.

Chair Writing FD-280: Repair to chair Writing including dismantling of old parts and replace with new parts made out of well seasoned teak wood as mentioned below and selling right all other existing parts. The entire chair shall be polished with French polish in original shade after properly removing the old exisiting polish and smoothening the surface with emery paper and apply wooden putty to fill up the gaps and cracks complete all as specified and as directed.

Front Leg

Rear leg

Stiffner

Side/back rail

Recaning of chair writing with 2mm wide half round cane plastic white in Godrej pattern with border of 3mm wide cane plastic, cane shall be of premier/ajay brand complete all as specified and as directed

Chair revolving with arms with cushion seat & back (TP/Godrej): . Taking out unserviceable seat and back of chair revolving, supply and fixing of new seat and back 50mm foam cushion for seat, 50mm foam cushion for back covered with teapastry cloth as approved by GE complete all as specified and as directed.

Removing old unserviceable coaster wheel and S&F new coaster wheels of chair revolving complete all as specified and as directed.

Removing old unserviceable base and S&F new Base of Godrej/Newage complete all as specified and as directed.

Removing old hydraulic system and S&F new hydraulic system complete all as specified and as directed.

Removing old unserviceable handles and S&F new handles complete all as specified and as directed.

Chair visitor with arms with cushion seat & back(TP/MAP): . Taking out unserviceable seat and back of chair Un-revolving with arm, supply and fixing of new seat and back 50mm thick foam cushion for seat, 25mm thick foam cushion for back covered with teapastry cloth as approved by GE complete all as specified and as directed.

Removing of unserviceable rubber shoes of Chairs, supply and fixing of new rubber shoes as per Drg complete all as specified and as directed.

Preparation of old painted surface of chair and apply one coat of synthetic enamel paint Black including denting and welding complete all as specified and as directed.

Removing old unserviceable handles and S&F new handles complete all as specified and as directed.

Table 900x600x760mm with drawer (Drg No.FD-224 & 283): Repair to table including dismantling of old broken parts and replace with new parts as mentioned below. The entire table shall be polished with French polish in original teak shade after properly preparation of surface by applying putty and smoothened with emery paper.

Taking out unserviceable top of table 900x600x760mm with drawer, supply and fixing of new top of pre-laminated particle board 18mm exterior grade BWR with all round 4mm thick teak wood beading as per Drg.

Taking out UNSV leg, supply and fixing of new leg of first class teak wood, as per Drg.

Taking out UNSV top long rail, supply and fixing of new top long of first class teak wood, as per Drg.

Taking out UNSV short rail, supply and fixing of new top short rail of first class teak wood, as per Drg.

Taking out unserviceable drawer, supply and fixing of new drawer of teak wood except bottom which shall be of 6mm ply wood commercial. Front portion of drawer shall be of teak wood

Taking out unserviceable stiffener, supply and fixing of new "H" Type stiffener complete of first class teak wood, as per Drg.

Taking out old UNSV PVC shoes and , supply and fixing of new PVC shoes with steel screw superior quality as approved by Engr-in-Charge.

Table 900x900mmx760mm W/O drawer: Repair to table including dismantling of old broken parts and replace with new parts as mentioned below. Table shall be repolished with French polish in original teak shade after properly preparation of surface by applying putty and smoothened with ambry paper.

Taking out unserviceable top , supply and fixing of new top of pre-laminated particle board 18mm exterior grade BWR with all round 4mm thick teak wood beading as per Drg.

Taking out UNSV leg, supply and fixing of new leg of first class teak wood, as per Drg.

Taking out UNSV top rail, supply and fixing of new top rail of first class teak wood, as per Drg.

Polishing of following wooden furniture with french polish (after removing existing polish and making good surface by scraping/cleaning) till glossy finish of best quality to the entire satisfaction of Engr-in-Charge

Book Case LP

Sofa set 5 seater

Rifle Rack

Table One Piece All Purpose

Charpoy GI Pipe(Drg No FD-220): M&L for repair to charpoy GI pipe consisting of following works:- (a) Taking out existing u/s ply wood from charpoy GI pipe complete all as specified and as directed. (b) Supply and fixing of 02 Nos of flat iron of size 40mmx5mm of length equal to width of ply wood/Charpoy GI pipe, bending the flat iron to the shape required to fix tightly to GI pipe with mild steel nuts, bolts 62 to 65mm long, 6mm dia and washers including necessary drilling into GI pipe and fitted in the top portion of flat iron complete all as specified and as directed. (c) Drilling holes 2 Nos each in long rails, 02 Nos each in short rails and 02 Nos at centre of ply wood complete all as specified and as directed. (d) Supply and fixing 12 mm thick ply wood commercial type of size 1980x900mm and fixed to GI pipe frame with nut bolts 6mm dia 62 to 65mm long Make of ply wood Green/Duro/Archit with ISI marked complete all as specified and as directed.

Taking down unserviceable/broken long rails of charpoy GI pipe and S&F new long rails of charpoy made out of GI pipe 32 mm dia bore medium grade ISI marked and approved by Engr-in-Charge including threading as shown on drg complete all as specified and as directed. Make of pipe Prakash Surya/Tata/Zindal

Taking down unserviceable/broken short rails of charpoy GI Pipe and fixing the short rail (Short rail shall be made from long rail obtained from serial item No 1.01 above) including cutting and threading complete all as specified and shown on drg.

Taking down unserviceable legs of charpoy GI pipe and fixing legs in charpoy (Legs shall be made from short rail obtained from serial items 1.02 above) including cutting and threading. The bottom of legs shall be provided with Cap (Plug) complete all as specified and shown on drg

Taking out unserviceable elbow 3 way 32 mm dia bore of charpoy GI pipe and S&F of new elbow 32mm dia bore ISI marked as approved by Engr-in-Charge, completed all as specified and shown on drg.

Taking out unserviceable check nut from Charpoy GI pipe and Supply and fixing new check nut suitable for charpoy GI pipe as approved by Engr-in-Charge, complete all as specified and shown on drg.

Charpoy Folding IP Hard Top (Drg No.388 R) Taking out old UNSV ply wood, Supply and fixing 12 mm thick ply wood commercial type of size 1980x900mm and fixed to charpoy folding with nut bolts 6mm dia 45 to 50mm long, Make of ply wood Green/Duro/Archit with ISI marked complete all as specified and shown on drg.

Removing of old UNSV PVC cap, supply and fixing new PVC cap of best quality as per Drg.

M&L for Painting of Charpoy folding IP hard Top with two coat of synthetic enamlel paint black including denting/painting and preparation of surfaces complete all as specified and as directed.

Almirah Large Steel (Drg No FD-76 (M) & 1031): . M&L for preparation of surfaces external and internal by removing old paint, removing dents/bends, apply putty to obtain smooth surface and apply two coats of spray painting of synthetic enamel paint (silver ash & olive green colours as directed by Engr-in-Charge) on internal and external surfaces over a coat of red oxide primer complete all as specified and as directed. Note: (i) Painting work shall be carried out after carrying out the following reapair works. (ii) Repair work will be measured and paid separately under respective items.

Removing of old unserviceable locks from the locking assembly by loosening of screws, supply & fixing new locks of Godrej pattern with duplicate keys complete all as specified and as directed.

Removing of unserviceable handles from almirah large and supply and fixing of new handle of mild steel chromium plated 100mm best quality as approved by GE complete all as specified and as directed.

Removing of unserviceable hooks from the almirah, supply and fixing of new hooks of best quality to be fixed in the vertical channel below of each shelves to maintain equal distance between shelves complete all as specified and as directed.

Replacement of old unserviceable shelves, supply and fixing new shelves made out of PBI sheet 01 mm thick complete all as specified and as directed.

Removing of unserviceable leg from bottom portion of almirah and supply & fixing of new leg made out of PBI sheet 1 mm thick as per Drg complete all as specified and as directed.

Removing of unserviceable hinges from shutter and supply and fixing of new hinge as per drawing complete all as specified and as directed.

Removing of old unservicable locking device supply and fixing of new locking device 3 way as per drawing complete all as specified and as directed.

Almirah Med Steel (Drg No FD-76(M) & 1032): . M&L for preparation of surfaces external and internal by removing old paint, removing dents/bends, apply putty to obtain smooth surface and apply two coats of spray painting of synthetic enamel paint (silver ash & olive green colours as directed by Engr-in-Charge) on internal and external surfaces over a coat of red oxide primer complete all as specified and as directed. Note: (i) Painting work shall be carried out after carrying out the following reapair works. (ii) Repair work will be measured and paid separately under respective items.

Removing of old unserviceable locks from the locking assembly by loosening of screws, supply & fixing new locks of Godrej pattern with duplicate keys complete all as specified and as directed.

Removing of unserviceable handles from almirah large and supply and fixing of new handle of mild steel chromium plated 100mm best quality as approved by GE complete all as specified and as directed.

Removing of unserviceable hooks from the almirah, supply and fixing of new hooks of best quality to be fixed in the vertical channel below of each shelves to maintain equal distance between shelves complete all as specified and as directed.

Replacement of old unserviceable shelves, supply and fixing new shelves made out of PBI sheet 01 mm thick complete all as specified and as directed.

Removing of unserviceable leg from bottom portion of almirah supply & fixing of new leg made out of PBI sheet 1 mm thick as per Drg complete all as specified and as directed.

Removing of unserviceable hinges from shutter and supply and fixing of new hinge as per drawing complete all as specified and as directed.

Removing of old unservicable locking device supply and fixing of new locking device 3 way as per drawing complete all as specified and as directed.

Locker Bed side steel (Drg No FD-257) M&L for preparation of surfaces external and internal by removing old paint, removing dents/bends, apply putty to obtain smooth surface and apply two coats of spray painting of synthetic enamel paint smoke grey & olive green colours as directed by Engr-in-Charge) on internal and external surfaces over a coat of red oxide primer complete all as specified and as directed. Note: (i) Painting work shall be carried out after carrying out the following reapair works. (ii) Repair work will be measured and paid separately under respective items.

Removing of old unserviceable CP handles, supply and fixing new mild steel chromium plated handles 100mm long as per Drg complete all as specified and as directed.

Removing of old unserviceable Hasp & Staple, supply and fixing of new mild steel chormium plated 100mm x 3mm thick Hasp & Staple complete all as specified and as directed.

Removing of old unserviceable shelves from locker steel, supply and fixing of new shelves of 1mm thick PBI Sheet as per Drg complete all as specified and as directed.

Removing of old unserviceable leg of locker steel, supply and fixing of new leg made of 1mm thick PBI Sheet as per Drg complete all as specified and as directed.

Removing of old unserviceable bottom sheet of locker steel, supply and fixing of new bottom of 1mm thick PBI Sheet complete all as specified and as directed.

Removing of old unserviceable hanging rod, supply and fixing of new steel hanging rod 18 gauge 20mm dia as per drg complete all as specified and as directed.

Chair Verandah (Drg No. FD 256/359/259/19) M&L for preparation of old steel surface of chair verandah and welding loose joints. If any including de-rusting the surface and painting with one coat of synthetic enammel paint white colour (1st Grade Quality) and re-caning with 4-5 mm half round 0.8mm thick plastic cane made out of virgin plastic, in existing pattern complete. Rest all as specified and directed by engr-in-charge.

Supply & Fixing Hard Rubber Shoes suitable for chair verandah of approved quality.

Table Office Officers Steel (Drg No FD-84(M)): Removing of old unserviceable top from Table office Officers, supply and fixing of new top of pre-laminated particle board 18mm thick teak shed, one side balancing white laminated with teak wood beading all round the top as per Drg complete all as specified and as directed.

Removing of old unserviceable drawer of Table office Officers, supply and fixing of new drawer made out of 1mm thick MS sheet as per Drg complete all as specified and as directed.

Adjustment of drawer to easy functioning and necessary denting/welding and repairing of bottom channel complete all as specified and as directed.

Removing of old unserviceable side cub board shutterr of Table office Officers, supply and fixing of new side cub board shutter made out of 1mm thick MS sheet as per Drg complete all as specified and as directed.

Taking out unserviceable legs, supply and fixing of new leg made out of 25mm square conduit 1.6mm thick as per Drg including cutting/welding etc complete all as specified and as directed.

All as per item No 30.04 but long rail.

All as per item No 30.04 but short rail.

All as per item No 30.04 but stiffners.

Removing of old unserviceable rubber shoes of Table office Officers steel , supply and fixing of new rubber shoes as per Drg complete all as specified and as directed.

M&L for Painting of Table office Officer with two coat spray painting of synthetic enamel paint Olive Green colour including preparation of surfaces complete all as specified and as directed.

Removing of old unserviceable locks from drawer of table by loosening of screws, supply and fixing of new locks of Godrej pattern with duplicate keys complete all as specified and as directed.

Table Office Clerk steel (Drg No FD-84(M)): Removing of old unserviceable top from Table office Clk steel, supply and fixing of new top of pre-laminated particle board 18mm thick exterior grade teak shed, one side balancing white laminated with 4 mm thick teak wood beading all round the top as per Drg complete all as specified and as directed.

Removing of old unserviceable drawer of Table office Clk steel, supply and fixing of new drawer made out of 1mm thick PBI Sheet as per Drg complete all as specified and as directed.

Adjustment of drawer to easy functioning and necessary denting/welding and repairing of bottom channel complete all as specified and as directed.

Taking out unserviceable legs, supply and fixing of new leg made out of 25mm square conduit 1.6mm thick as per Drg including cutting/welding etc complete all as specified and as directed.

All as per item No 31.03 but long rail.

All as per item No 31.03 but short rail.

All as per item No 31.03 but stiffners.

Removing of old unserviceable rubber shoes of Table office Clerk steel , supply and fixing of new rubber shoes as per Drg complete all as specified and as directed.

M&L for Painting of Table office Clk steel with two coat of spray painting of synthetic enamlel paint Olive Green colour including denting/painting and preparation of surfaces complete all as specified and as directed.

Removing of old unserviceable locks from drawer of table by loosening of screws, supply and fixing of new locks of Godrej pattern with duplicate keys complete all as specified and as directed.

Table 3' x 3' Steel (Drg No. FD-1009): Removing of old unserviceable top from Table office Clk steel, supply and fixing of new top of pre-laminated particle board 18mm thick exterior grade teak shed, one side balancing white laminated with 4 mm thick teak wood beading all round the top as per Drg complete all as specified and as directed.

Taking out unserviceable legs, supply and fixing of new leg made out of 20mm square conduit 1.6mm thick as per Drg including cutting/welding etc complete all as specified and as directed.

Removing of old unserviceable rubber shoes of Table 3x3 steel , supply and fixing of new rubber shoes as per Drg complete all as specified and as directed.

Painting of Table 3'x3. steel with two coat of synthetic enamlel paint Olive Green colour including denting/painting and preparation of surfaces complete all as specified and as directed.

Teapoy Verandah (Drg No FD-255): Taking out unserviceable top, supply and fixing of new top of pre-laminated particle board exterior grade 18/19mm thick teak shade and other side with balancing white lamination with 4mm thick teak wood beading all round with French polishing as per Drg complete all as specified and as directed.

Taking out unserviceable i.e leg, supply and fixing new leg as per drg complete all as specified and as directed.

All as per item No 33.01 but stiffners.

Taking out of unserviceable shoes, supply and fixing of new rubber shoes as per Drg complete all as specified and as directed.

M&L for Painting of frame of teapoy verandah with two coats of synthetic enamel paint, white colour and perparation of surfaces complete all as specified and as directed.

Chair Verandah FD/E6/MAP/06 Repair to chair verandah by way of taking down UNSV PVC seat and Back from chair and cleaning by scrapping and making smooth surface and apply two coats of synthetic white enamel paint of ultra white colour Make (Asian/Apcolite/Burger) complete all as specified and as directed.

Taking down deteriorated portion of frame and providing new 19mm round tube of 16 gauge as in legs, frame stiffner etc (each not exceeding 40 cm long) as required fixing with necessary welding and finishing as per existing with two coats of existing colour of enamel paint complete all as specified and as directed.

Supply and fixing of new PVC Seat and Back with 4mm thick with weight not less than 1.85 kg and grooves 90x10mm 10 nos on seat and back of approved best quality, complete all as specified and as directed

Supply and fixing of new PVC shoe of best quality as per drg.

Almirah Large Steel 1/2 H 1/2 S (Drg No : M&L for preparation of surfaces external and internal by removing old paint, removing dents/bends, apply putty to obtain smooth surface and apply two coats of spray painting of synthetic enamel paint (silver ash & olive green colours as directed by Engr-in-Charge) on internal and external surfaces over a coat of red oxide primer complete all as specified and as directed. Note: (i) Painting work shall be carried out after carrying out the following reapair works. (ii) Repair work will be measured and paid separately under respective items.

Removing of old unserviceable locks from the locking assembly by loosening of screws, supply & fixing new locks of Godrej pattern with duplicate keys complete all as specified and as directed.

Removing of unserviceable handles from almirah large and supply and fixing of new handle of mild steel chromium plated 100mm best quality as approved by GE complete all as specified and as directed.

Removing of unserviceable leg from bottom portion of almirah and supply & fixing of new leg made out of PBI sheet 1 mm thick as per Drg complete all as specified and as directed.

Removing of old unservicable locking device supply and fixing of new locking device 3 way as per drawing complete all as specified and as directed.

Removing of old unserviceable hanging rod, supply and fixing of new steel hanging rod 18 gauge 20mm dia as per drg complete all as specified and as directed.

Table computer FD/E6/MAP/03 Repair to table including dismantling of old broken parts and replace with new parts as mentioned below. Table shall be repainted with apply two coat of synthetic enamel paint OG/Black including denting and welding complete all as specified and as directed.

Taking out unserviceable top of table computer, supply and fixing of new top of pre-laminated particle board 18mm exterior grade BWR with all round 4mm teak wood beading as per Drg complete all as specified and as directed.

Taking out UNSV key board tray, supply and fixing of new key board tray as per Drg complete all as specified and as directed.

Taking out unserviceable drawer, supply and fixing of new drawer of teak wood except bottom which shall be of 6mm ply wood commercial complete all as specified and as directed.

Taking out old UNSV nylon buffers, S & F new nylon buffers superior quality complete all as specified and as directed.

Bed Hard (Drg No. FD/E6/MAP/08 ( R ) Taking out old UNSV ply wood,Supply and fixing 12 mm thick ply wood commercial type of size 1980x900mm and fixed to Bed Hard frame with nut bolts 25mm long screw, Make of ply wood Greenply/Duro/Archid with ISI marked complete all as specified and as directed.

Removing of old UNSV PVC cap, supply and fixing new PVC cap of best quality as per Drg complete all as specified and as directed.

Removing of old UNSV foot board, supply and fixing new foot board of 18mm pre laminated particle board exterior grade complete all as specified and as directed.

Removing of old UNSV head board, supply and fixing new head board of 18mm pre laminated particle board exterior grade complete all as specified and as directed.

M&L for Painting of Bed hard with two coat of synthetic enamlel paint black including denting/painting and preparation of surfaces complete all as specified and as directed.

Charpoy IP Hard Top( Drg No. FD/MAP-II/01) Taking out old UNSV ply wood, Supply and fixing 12 mm thick ply wood commercial type of size 1980x900mm and fixed to GI pipe frame with nut bolts 6mm dia 62 to 65mm long Make of ply wood Green/Duro/Archit with ISI marked complete all as specified and as directed.

Removing of old UNSV PVC cap, supply and fixing new PVC cap of best quality as per Drg complete all as specified and as directed.

M&L for Painting of Charpoy IP hard Top with two coat of synthetic enamlel paint black including denting/painting and preparation of surfaces complete all as specified and as directed.

M&L for Two coats of spray painting of synthetic enamel paint silver ash/black colour on internal and external surfaces over a coat of red oxide primer after removing the existing paint and preparing the surface smoothely by scrapping/cleaning the surface with emery paper complete all as specified and as directed.

Book case steel

Rack Shoe Steel (FD/E6/MAP/02 (R))

M/s Kapil Furniture

M/S CHANDER SHEKHAR

SMS Enterprises

M/S SUNIL TRADERS