Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹93.7 LAccepted-Finance | L1 | Accepted-Finance Accepted | |
| 2 | L2₹94.6 L+₹96,512.13 (1.03%)Rejected-Finance MALDA MECHANICAL DIVISION PHE DTE VILLAGE DAULATPUR POST MAHILA NEAR MALDA POLY TECHNIC PIN 732102 | MALDA | MALDA | WEST BENGAL | 732102 | L2 | Rejected-Finance Rejected | |
| 3 | L3₹95.6 L+₹1.9 L (2.03%)Rejected-Finance RATNA P S RATNA MALDA | MALDA | MALDA | WEST BENGAL | L3 | Rejected-Finance Rejected |
Tender Value
₹93.7 L
EMD Value
₹1.9 L
Closing Date
25 Aug 2026, 4:00 pmClosed
Executive Engineer, Malda Ars Area W/S Divn, PHED.
The Executive Engineer, Malda Ars Area W/S Divn, PHED. DOULATPUR PHE COMPLEX, MALIHA MALDA-732102
Laying of distribution and parallel Upvc pipe line, supply of all specials and valves, others Allied works, Common Manifold and three months trial run in connection with JJM at Sukhdevpur under Sabdalpur PWSS of Kaliachak-III Block under MAAD.
2026_PHED_1034541_12
WBPHED/EE/MAAD/NIeT _06 of 2026-2027.
Open Tender
CIVIL WORKS
Percentage
DOULATPUR PHE COMPLEX, MALIHA MALDA-732102
Please refer Tender documents.
4 documents required · 4 mandatory
₹1.9 L
Yes
30 Sept 2026
27 Jul 2026
27 Aug 2026
28 Jul 2026
25 Aug 2026
28 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling all type of plain cement concrete works, stacking serviceable materials at site and removing rubish as directed with in a lead of 75 mtr. In ground floor including roof. (a) upto 150 mm thick. | 82.29 | cum | 939 | ₹77,270.31 |
| 2 | Bituminous pucca road (approx. 450mm depth) cutting by using gaiti,
chisel, hammer etc. and picking uip the withdrawing excavated materials and remove the same within distance of 30mtr. at least all complete for fixing/crossing all dia of pipe line as per direction of EIC | - | cum | 1,023 | - |
| 3 | Emergency horaizontal road crossing by Augor-boring including boring charge, pipe laying and jointing, making baricates, lighting arrengement etc. All complete as per direction of E.I.C (For 80 mm dia to 200 mm dia pipes.) | 10 | No | 4,970.19 | ₹49,701.9 |
| 4Carrying CI/DI pipes with specials and valves and lowering placing in position and laying carefully inside the trenches in proper alignment and gradient etc. including earth work in excavation of adequate width as per specification having min. clear cover from top of pipe is 1.10mtr. below existing ground level in any kind of soil including mixed with boulder, road sub-grade and its flank,but excluding moorum and laterite and stone etc.without damaging the exisiting telephone/electric cable etc.(in case of damaged if any type of cable line during excecution , necessary damaged charges as applicable by the respective authority will be borne by the agency in his own cost) preparing the bottom surface for continuous bedding of pipe line and laying pipes, fitting, fixing specials and valves with bailing out water if any including carriage of pipes, specials and valves from local deptt. store within 8KM and back filling the trenches with excavated earth in layers to original condition as per specification and direction of EIC. The surplus materials after execution of work are to be return to the deptt. store. N.B: i) Any deviation from required clear cover of 1.10mtr., due to site adverse condition, prior permission is to be obtained from the EIC in exceptional situation and payment will be made on prorate basis over therate of entire item ii) No payment will be made without hydraulic test of the pipe line either part or full iii) The pipes, specials and valves , rubber gasket will be supplied deptt. free of cost. | |||||
| 4.01 | a) 250mm dia | 3,476 | Mtr | 164 | ₹5,70,064 |
| 5Making rubber gasket joint to CI/DI pipes maintaining proper alignment level etc. by mechanical arrangement with or without using mobile cranes where necessary and with help of all other equipments tools and tackles etc. as required providing lubricants of approved quality and direction of EIC. (rubber gasket will be supplied deptt. free of cost) | |||||
| 5.01 | a) 250mm dia. | 632 | No | 64 | ₹40,448 |
| 6Cutting DI pipe (all class & type) to required length with cutting device etc. and grinding the cutting portion with file as per direction and satisfaction of EIC. | |||||
| 6.01 | c) 250mm.dia.to 350mm.dia pipe | 63 | No | 263 | ₹16,569 |
| 7Chamfering the spigot end of all type/class of DI pipe for proper using of push joint by means of grinder set at site for proper joint etc. all complete as per direction of EIC. | |||||
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.51 MB
Tendernotice_2.pdf
PDF • 5.00 MB
12.pdf
Tender Documents • 0.66 MB
BOQ_2541131.xls
BOQ • 0.46 MB
Corri_I.pdf
PDF • 0.47 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .