Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.4 LAccepted-Finance | L1 | Accepted-Finance Accepted | |
| 2 | L2₹8.4 L+₹1.1 L (14.6%)Accepted-Finance | L2 | Accepted-Finance Accepted | |
| 3 | Rejected-Technical | - | Rejected-Technical Docus not found as per terms and conditions |
Tender Value
₹8.6 L
EMD Value
₹17,240
Closing Date
5 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CO 267 ENGR REGT
267 ENGR REGT C/O 99 APO PIN-914267
SUPPLY AND CONSTR OF 250 MTR SECURITY FENCING
2024_ARMY_661575_1
3750/2024-25 (S AND C) New
Open Tender
Civil Works
Item Rate
120 days
LEIMAKHONG
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
267 ENGR REGT
₹17,240
9 Sept 2024
22 Jun 2024
6 Jul 2024
22 Jun 2024
5 Jul 2024
29 Jun 2024
Amount
Schedule 'A'
Cement PPC conforming to IS 11761 : 1997 (as per latest revision) in 50 KG packed laminated and water proof bag type A/type B, Make : AMBUJA/BIRLA/ L&T/JK/CCI/Dalmia
Coarse Sand: Sand shall be clean, sharp, angular hard and durable free from adherent caoting and shall not contain clay, mica and other impurities. The maximum quantities of clay and fine silt in sand shall not be more than 5% by mass as per IS-383-1970
40mm Stone Aggregates: Stone aggregate shall be crushed stone 40mm graded conforming to IS-383-1970 and shall be clean hard tough, durable and of uniform quality throughout. The aggregate shall be free from soft disintegrated materials, vegetable and other organic impurities.
Structural steel rolled angle iron section 65 x 65 x 6mm fencing post conforming to IS2062-1984, 3.75m long including fabrication of 0.75m long top portion for swan neck at 30 degree to vertical including making six round holes of 15mm dia on vertical posts for fixing of strut and four nos notches on the swan neck and welding of two nos of 16mm MS rod each of 0.20mtr length to bottom end of post for anchorage including one coat of red oxide primer and two coats of synthetic enamel paint for the exposed surface of angle above GL complete and two coats of bituminous paint to embedded portion of angle (0.60m), weight of each post shall be not less than 21.75 Kg. Make: TATA/SAIL/JINDAL
MS flat iron 40 x 6mm, 2.4 m long with holes of 15mm dia, all as per drg including one coat of red oxide primer and two coats of synthetic enamel paint. Weight of Each flat not less than 4.50 Kg Make: TATA/SAIL/JINDAL
Mild Steel Round Bars 10 mm Dia 3.15 Metre Long (includin hook at both ends 0.09m long), made to shape as shown in drawing including one coat of red oxide primer and two coats of synthetic enamel paint. Weight of Each bar not less than 1.94 Kg Make - TATA / SAIL / ISI Marked
Galvanised steel Chain link fence fabric 2.4m wide, mesh size 100mm x 100mm (+/- 4mm) made of 4.00mm nominal diameter wire. Galvanized chain link shall be manufactured as per IS4826 Make: TATA/SAIL/JINDAL
Structural steel rolled angle iron section 65 x 65 x 6mm, 2.90m long conforming to IS2065-1984 including fabrication for strut bending at top portion including making three Nos holes of 15mm dia and welding 0.20 m long 16 mm dia MS rod at bottom for anchoring purpose including one coat of red oxide primer and two coats of synthetic enamel paint for exposed surfaces of angle above GL and two coats of bituminous paint on embedded portion of strut (0.55m below GL).weight of each Strut shall be not less than 16.80 Kg. Make: TATA/SAIL/JINDAL
Mild Steel bolts with hexagonal head at one end and screwed on the other end, fitted with one nut and two washers. The bolt shall be 12mm dia and 50mm long. Make: TATA/SAIL/JINDAL
Galvanised steel two strand barbed wire, 2.24mm dia meter of wire, 2mm dia wire barb at 75 mm spacing, conforming to IS:278 of 1978 (Third Revision) with amdt No 1 to 4. The points of barbs shall be sharp. The line and point wires shall be circular in section free from scales and other defects and shall be uniformly galvanized. The barbed wire shall be manufactured as per clause 11.2.1 and 11.2.2 respectively of IS specification cited above read with IS4826/79 (first revision). Make: TATA/SAIL/JINDAL
TMT Bar 16 mm dia (Make - Sail / Tata/ Kamdhenu/ Jai Balaji)
TMT Bar 10 mm dia (Make - Sail / Tata/ Kamdhenu/ Jai Balaji)
TMT Bar 8 mm dia (Make - Sail / Tata/ Jindal)
Steel fabricated gate of size 5.4m wide and 3.4m height with all accessories. The gate will be painted with two coats of black paint over one coat of red oxide primer . All dimensions as per drg att. (Make of steel bar : TATA/SAIL/Jindal & Paint Brand . Nerolac / Burger /Asian)
20mm thick granite (approved colour)
GI Binding wire 1.20mm dia.
Provn of Solar Hybrid stret light with both AC and DC working feature 40W LED, 75w Module with inbuilt battery of 12.8V/36AH alongwith Pole of 6 mtr incl all fitting accessories
PVC indulated, heavy duty, 1100 volt grade cable with aluminium conductor, twin core, 6 sqmm served with sheathing of PVC tape and overall PVC sheathed flat or circular. (Make : Finolex/Havells/Polycab/Plaza)
PVC sheathed unamoured stranded copper conductor cable of size 1.0 sqmm dia conform to IS 694/1900 (90 Mtr Roll). (Make : Finolex/Havells/Polycab/Plaza)
Insulation tape
20mm Stone Aggregates: Stone aggregate shall be crushed stone 20mm graded conforming to IS-383-1970 and shall be clean hard tough, durable and of uniform quality throughout. The aggregate shall be free from soft disintegrated materials, vegetable and other organinc impurities.
32 Amp main switch (Make : Havells/Indo Asian/Legrand)
32 Amp change over switch with slide handle (Make Havells/Indo Asian/Legrand)
M/S P ENTERPRISES (BID ID -3046313)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .