Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.5 CrAccepted-AOC 337 C INDIRA GANDHI ROAD KONNAGAR HOOGHLY 712235 | KONNAGAR | HOOGHLY | WEST BENGAL | 712235 | ₹2.5 Cr | L1 | Accepted-AOC L1 |
| 2 | L2₹2.6 Cr+₹15.3 L (6.15%)Rejected-Finance MATHABHANGA COOCH BEHAR | MATHABHANGA | COOCH BEHAR | WEST BENGAL | ₹2.6 Cr+₹15.3 L (6.15%) | L2 | Rejected-Finance L2 |
| 3 | L3₹2.8 Cr+₹32.0 L (12.9%)Rejected-Finance ARABINDAPALLY GOPINATHPUR POST DISTRICT BANKURA | BANKURA | BANKURA | WEST BENGAL | 722101 | ₹2.8 Cr+₹32.0 L (12.9%) | L3 | Rejected-Finance L3 |
| 4 | L4₹2.9 Cr+₹44.8 L (18.0%)Rejected-Finance AT JHILIMILI P O JHILIMILI DIST BANKURA | ₹2.9 Cr+₹44.8 L (18.0%) | L4 | Rejected-Finance L4 |
| 5 | L5₹4.3 Cr+₹1.9 Cr (74.7%)Rejected-Finance | ₹4.3 Cr+₹1.9 Cr (74.7%) | L5 | Rejected-Finance L5 |
| Sl No | Description | Qty | Unit | GLOBAL CONSTRUCTION L2 | SIBSANKAR CHOWDHURY L3 | RAISINHA INFRASTRUCTURE PRIVATE LIMITED L5 | ARUN KUMAR DAS L4 | GUPTA ENTERPRISE L1 |
|---|---|---|---|---|---|---|---|---|
| 1.00Supply and delivery and laying at site ISI Mark Socket and Spigot jointing system centrifugally cast DI (K7) of 100mm and 150mm diameter pipes of conforming to IS 8329-2000 (Third revision) in standard length 4 m, 5 m, 5.50 m, 6 m for push-on joint (rubber gasket) with internal cement mortar lining and external protection by metallic zinc coating with finish layer of epoxy coating of outside as per IS: 8329-2000 specification with necessary jointing material rubber gasket (IS: 5382:1985) including transportation, loading, unloading and stacking at site including free supply of polyethylene sleeves, AND Supplying HDPE (Materials grade PE-100) pipes conforming to IS 4984-1995 with latest revision & amendments if any Pressure Rating: PN 06 with necessary HDPE specials, Supplying PVC-O pipes conforming to IS 16647-2017 with latest revision & amendments if any & Laying of D.I. (K-7) Pipes, HDPE Pipes with all D.I. and HDPE Specials & supplying, fitting & fixing with IS 3589 Fe 410, including earth work in excavation in trenches, shoring (if necessary) of adequate width having minimum depth to keep the top surface of pipe 1.00 M below of the existing ground level in any kind of soil mixed with boulder, metal crust, concrete pavement, any road sub-grade and its flank etc., dewatering the trenches, preparing the bottom surface of the trenches for continuous bedding including sand filling (if necessary), PWD Crossing and over ground installation to cross small ditches etc. supported with RCC pillars as & when necessary and fitting, fixing, jointing (all types of joints) valves, specials etc. as per requirement, in position, cutting, chamfering of pipes as required, carriage of materials from departmental store to work site, D.I. Specials as per requirement, filling of the trenches with excavated materials, consolidating the same in layers, guarding trenches with temporary bamboo railing for safety where necessary, emergency horizontal auger boring where necessary, removing the surplus materials from site including all labour charges, tools and plants, hydraulic pressure testing, cleaning and disinfection of pipes etc. complete in all respect as per IS 12288-1987 (latest edition) and including parmanent Roads Restoration and the instruction of E.I.C. (D.I. pipes, Specials, rubber gaskets and other materials like Sluice valve, Air Release valve, Drain valve, D.I. Fittings, Mechanical Joints etc., where necessary, will be supplied by agency. The surplus and unused materials are to be removed and clean the sites at own cost.) | ||||||||
| 1.01 | HDPE Pipe Line: 110 mm dia. | 13,300 | m | 710 ₹94,43,000 | 701 ₹93,23,300 Lowest | 910 ₹1,21,03,000 | 949 ₹1,26,21,700 | 870 ₹1,15,71,000 |
| 1.02 | DI (K7) Pipe Line: 150 mm dia. | 2,000 | m | 4,900 ₹98,00,000 | 4,444.15 ₹88,88,300 | 6,900 ₹1,38,00,000 | 3,770 ₹75,40,000 | 2,790 ₹55,80,000 Lowest |
| 1.03 | DI (K7) Pipe Line: 100 mm dia. | 3,000 | m | 2,150 ₹64,50,000 Lowest | 3,078.38 ₹92,35,140 | 4,150 ₹1,24,50,000 | 2,860 ₹85,80,000 | 2,300 ₹69,00,000 |
| 1.04 | Supply and delivery of CIDF sluice valve (Special type) PW-1.00 of different dia make with CI double flanged non rusting spindle sluice valves conforming to IS 14846 -2000 with latest emended having body dome/bonnet and cover of C.I.Gr-F.G 210mtr. spindle of IS-6603 G.R- 12/Gr-13 non-magnetic, nuts seat rings are of Gunonetal as per IS:318 LTB-2 flanges and drilled to IS:1538 Part IV & VI valves are suitable for max. working pressure of 10kg/cm2(seat test) and body tested to 15kg/cm2. 1)100 mm dia. | 22 | Each | 5,000 ₹1,10,000 Lowest | 7,700 ₹1,69,400 | 50,000 ₹11,00,000 | 6,900 ₹1,51,800 | 11,500 ₹2,53,000 |
| 1.05 | Supply and delivery of CIDF sluice valve (Special type) PW-1.00 of different dia make with CI double flanged non rusting spindle sluice valves conforming to IS 14846 -2000 with latest emended having body dome/bonnet and cover of C.I.Gr-F.G 210mtr. spindle of IS-6603 G.R- 12/Gr-13 non-magnetic, nuts seat rings are of Gunonetal as per IS:318 LTB-2 flanges and drilled to IS:1538 Part IV & VI valves are suitable for max. working pressure of 10kg/cm2(seat test) and body tested to 15kg/cm2.
1)150 mm dia. | 6 | Each | 10,000 ₹60,000 Lowest | 11,470 ₹68,820 | 1,10,000 ₹6,60,000 | 10,400 ₹62,400 | 15,000 ₹90,000 |
| 1.06 | Construction of different dia Sluice valve /Air valve /Washout chamber in different sizes for village road where light traffic run and for main road where heavy traffic run as deptt.approved drawing with 25cm thick brick work (1:6) over cement concrete (4:2:1) over a single B/F soling over150mm.thick sand filling in foundation including earth work in excavation and disposal of excess earth from work site with RCC (1:1.5:3) cover slab 100mm / 150mm thick slab on top of chamber with 1% einforcement in RCC cover slab with necessary opening for operation of valve all complete including cost of labour & materials as per Departmental Dwg. [Reinforcement type:- Other manufactuerers not specified] i) 80 mm to 150 mm dia pipe | 28 | Each | 19,000 ₹5,32,000 | 13,500 ₹3,78,000 Lowest | 1,19,000 ₹33,32,000 | 13,900 ₹3,89,200 | 17,000 ₹4,76,000 |
Tender Value
Refer Docs
EMD Value
₹1 L
Closing Date
20 Aug 2024, 6:00 pmClosed
OFFICE OF THE SUPERINTENDING ENGINEER,SOUTH CIRCLE
Kausallya, Opposite Kausallya T.O.P. Kharagpur, Dist- Paschim Medinipore,
Supply , delivery and laying of HDPE and DI pipes including permanent road restoration works within Chandrakona Municipality under AMRUT 2.0
2024_MAD_720869_1
MED/SE(S)/324/W-6/06 Pt-III Dated-24/07/2024
Open Tender
CIVIL WORKS
Item Rate
180 days
Chandrakona Municipality
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹1 L
Yes
OFFICE OF THE SUPERINTENDING ENGINEER SOUTH CIRCLE
7 Aug 2026
24 Jul 2024
22 Aug 2024
24 Jul 2024
20 Aug 2024
24 Jul 2024
30 Jul 2024
Amount
Supply and delivery and laying at site ISI Mark Socket and Spigot jointing system centrifugally cast DI (K7) of 100mm and 150mm diameter pipes of conforming to IS 8329-2000 (Third revision) in standard length 4 m, 5 m, 5.50 m, 6 m for push-on joint (rubber gasket) with internal cement mortar lining and external protection by metallic zinc coating with finish layer of epoxy coating of outside as per IS: 8329-2000 specification with necessary jointing material rubber gasket (IS: 5382:1985) including transportation, loading, unloading and stacking at site including free supply of polyethylene sleeves, AND Supplying HDPE (Materials grade PE-100) pipes conforming to IS 4984-1995 with latest revision & amendments if any Pressure Rating: PN 06 with necessary HDPE specials, Supplying PVC-O pipes conforming to IS 16647-2017 with latest revision & amendments if any & Laying of D.I. (K-7) Pipes, HDPE Pipes with all D.I. and HDPE Specials & supplying, fitting & fixing with IS 3589 Fe 410, including earth work in excavation in trenches, shoring (if necessary) of adequate width having minimum depth to keep the top surface of pipe 1.00 M below of the existing ground level in any kind of soil mixed with boulder, metal crust, concrete pavement, any road sub-grade and its flank etc., dewatering the trenches, preparing the bottom surface of the trenches for continuous bedding including sand filling (if necessary), PWD Crossing and over ground installation to cross small ditches etc. supported with RCC pillars as & when necessary and fitting, fixing, jointing (all types of joints) valves, specials etc. as per requirement, in position, cutting, chamfering of pipes as required, carriage of materials from departmental store to work site, D.I. Specials as per requirement, filling of the trenches with excavated materials, consolidating the same in layers, guarding trenches with temporary bamboo railing for safety where necessary, emergency horizontal auger boring where necessary, removing the surplus materials from site including all labour charges, tools and plants, hydraulic pressure testing, cleaning and disinfection of pipes etc. complete in all respect as per IS 12288-1987 (latest edition) and including parmanent Roads Restoration and the instruction of E.I.C. (D.I. pipes, Specials, rubber gaskets and other materials like Sluice valve, Air Release valve, Drain valve, D.I. Fittings, Mechanical Joints etc., where necessary, will be supplied by agency. The surplus and unused materials are to be removed and clean the sites at own cost.)
HDPE Pipe Line: 110 mm dia.
DI (K7) Pipe Line: 150 mm dia.
DI (K7) Pipe Line: 100 mm dia.
Supply and delivery of CIDF sluice valve (Special type) PW-1.00 of different dia make with CI double flanged non rusting spindle sluice valves conforming to IS 14846 -2000 with latest emended having body dome/bonnet and cover of C.I.Gr-F.G 210mtr. spindle of IS-6603 G.R- 12/Gr-13 non-magnetic, nuts seat rings are of Gunonetal as per IS:318 LTB-2 flanges and drilled to IS:1538 Part IV & VI valves are suitable for max. working pressure of 10kg/cm2(seat test) and body tested to 15kg/cm2. 1)100 mm dia.
Supply and delivery of CIDF sluice valve (Special type) PW-1.00 of different dia make with CI double flanged non rusting spindle sluice valves conforming to IS 14846 -2000 with latest emended having body dome/bonnet and cover of C.I.Gr-F.G 210mtr. spindle of IS-6603 G.R- 12/Gr-13 non-magnetic, nuts seat rings are of Gunonetal as per IS:318 LTB-2 flanges and drilled to IS:1538 Part IV & VI valves are suitable for max. working pressure of 10kg/cm2(seat test) and body tested to 15kg/cm2. 1)150 mm dia.
Construction of different dia Sluice valve /Air valve /Washout chamber in different sizes for village road where light traffic run and for main road where heavy traffic run as deptt.approved drawing with 25cm thick brick work (1:6) over cement concrete (4:2:1) over a single B/F soling over150mm.thick sand filling in foundation including earth work in excavation and disposal of excess earth from work site with RCC (1:1.5:3) cover slab 100mm / 150mm thick slab on top of chamber with 1% einforcement in RCC cover slab with necessary opening for operation of valve all complete including cost of labour & materials as per Departmental Dwg. [Reinforcement type:- Other manufactuerers not specified] i) 80 mm to 150 mm dia pipe
GLOBAL CONSTRUCTION (BID ID -5319416)
SIBSANKAR CHOWDHURY (BID ID -5412648)
ARUN KUMAR DAS (BID ID -5460572)
RAISINHA INFRASTRUCTURE PRIVATE LIMITED (BID ID -5433723)
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .