REPAIR REPLACEMENT OF DRAINAGE SYSTEM FENCING FOOTPATH HARD STANDING BOUNDARY WALL PARAPET CULVERTS AND GATES UNDER AOR OF AGE BRI AT AF STN CHAKERI KANPUR

Amount

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410-W(Gde?E- 250) quality?A?complete all as specified and directed.

S& F hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S & F 1.25 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap jointswith riveted or welded seams, including bending or turning up, mitred angles, etc. as required Complete all as specified and directed.

S & F for Mild steel angles , flats,bars etc as in posts and struts in fencing including cutting tops to shape as supports for stiffening of fencing , wall ties, hold fasts, clamps plain angle cleats for securing purlins as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting welding, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed..

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description exc. 10cm width or girth complete all as specified and as directed.

S&F in repair 3 mm printed/green PVC sheet fixed or laid on gate/window by using steel winding wire or any other means complete all as specified and directed by Engr-in-charge.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed .

M & L for brick work with sub class `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and as directed.

M & L for brick work (Except bricks) in straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and as directed. (Note:- old serviceable brick obtained from demolition shall be reused.)

Taking down cement plaster on Brick or Stone,concrete walls ,ceiling etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M & L rendering 15 mm thick on rough faces of brick work or concrete surfaces in cement plaster 1:6, and complete all as specified and directed. finished even and smooth without using extra cement, complete all as specified and directed.

M & L rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:6, and complete all as specified and directed. finished even and smooth without using extra cement, complete all as specified and directed.

M&L for Providing, cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, ivcluding form work complete all as specified and as directed.

M & L for two coats of cement base paint over a coat of primer including preparation of new plastered surfaces on wall, completed all as specified and directed.

Dismantling of barbed wire, any type complete all as specified and as directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

Restraining and re securing including making good staple of Galvanised. 2 strand, steel barbed wire of any dia and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

Providing and fixing in repair concertina coil fencing with punched tape concertina coil 600 mm dia having 9 nos rounds per 1 metre length punched tape concertina coil with two handle and spikes at both end of coil with dovetail clips [18 SWG], incl razor wire [7 No], 6m length of each wire medium size, barbed length 20mm width 14mm, incl 51 pins, 128 Nos of clips in each coil incl 230gm/ Sqm Zinc coating on core wire, with existing/new angle iron ‘Y’ shaped laying over boundry wall all complete as per direction of Engineer-incharge, Note:- 1.cost of M.S. angle, shall be paid separately 2.Concertina coil 9 nos rounds per 1 metre length shall be measured as one RM,

Re- Fixing only existing serviceable concertina coil and razor blade including necessary fittings including dismantling complete all as specified and directed.

Demolition of Cement concrete (Unreinforced) n exe 15 cm thickness (below or above ground level) complete all as directed.

M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base , finish even & smooth without using extra cement all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation all as specified and directed.

M&L for 60mm thick PCC M-35 machine pressed coloured interlocking pavor block any shape and size confirming to IS-15658-2006 using with grey cement and pigment complete all as specified and directed. all as specified and directed.

M&L for 100mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in sub base , finish even & smooth without using extra cement all as specified and directed.

Providing, Supplying, Loading, Unloading and installation on site Factory made steam cured R.C.C Precast U shaped drain size 450x450 internal dimension thickness of 150mm The drain shall be of M30 grade concrete including reinforcement Fe500 Grade of IS432 Part II, OPC 53 Grade Cement. The surface finish shall be smooth finish. The drain shall have grooves for jointing at the edge, curing arrangements, special in built insert, sleeves at appropriate location as specified in drawing for fixing, lifting including mechanical means, loading, transportation at site including all leads, lifts. All joints to be specified joint filling compound material.complete all as specified and directed .Note - Rate included demolition of existing drain,site clearing,surface leveling and PCC bed.

Providing, Supplying, Loading, Unloading in repair on site Factory made steam cured R.C.C Precast U shaped drain size 600x600 internal dimension thickness of 150mm The drain shall be of M30 grade concrete including reinforcement Fe500 Grade of IS432 Part II, OPC 53 Grade Cement. The surface finish shall be smooth finish. The drain shall have grooves for jointing at the edge, curing arrangements, special in built insert, sleeves at appropriate location as specified in drawing for fixing, lifting including mechanical means, loading, transportation at site including all leads, lifts. All joints to be specified joint filling compound material.complete all as specified and directed .Note - Rate included demolition of existing drain,site clearing,surface leveling and PCC bed.

S&F in repair factory made precast M-30 grade RCC drain COVER of 100 mm thick of concrete rienforced with 8 mm dia TMT bar of Fe-500 grade at 150 mm c/c spacing both way with strong vibrating compaction by vibratory table including jointing & finishing complete all as specified and directed.

Providing and fixing in repair rectangular/circular/square medium duty (weight capacity 2.5 to 5 ton) composite FRP cover anti corrosive with frame for storm drain /inspection chamber/traps/manhole etc complete all as specified and directed..

Demolition of reinforced cement concrete such as roofs, floors, slab cover, beams, landing and similar suspended work, complete all as specified and directed.

M&L precast reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in cover slab/drain cover etc or any other similar work set in CM 1:6 including necessary form work complete all as specified and directed.

M&L for mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking bending spirally for lintels and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

Dismantling of timber work as in framed work like ladder, truss etc complete all as specified and directed.

M & L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:4, finished with floating coat of neat cement even and smooth and mixing with water proofing compund complete all as specified and directed. Note : WPC will be measured and paid seperately.

Supply only integral water proofing compound, complete all as specified and directed.

M/S ASM ENTERPRISES (BID ID -3422382)