Loading
Loading…
Loading…
Tender Value
₹26.4 Cr
EMD Value
₹52.8 L
Closing Date
9 Sept 2026, 3:00 pm
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (RSP)
Above/Below/Par
TENDER
18 conditions · 5 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Non submission of Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet by the tenderer shall result in summarily rejection of his / their bid.
The tender/technical bid will be evaluated based on bid capacity formula detailed as Annexure-VI.
8 conditions · 5 needing a document upload
Preference to Make in India will be given during evaluation of this tender as per DPIIT order No P-45021/2/2017-PP (BE-II)- Part(4)Vol.II dated 19.07.2024.Only 'Class-I local supplier' and 'Class-II local supplier', as defined under the Order, shall be eligible to bid in this tender. 'Non-local suppliers' shall not be eligible to bid in this tender. Since, this work is not divisible in nature, the 'Class-I local supplier' shall get purchase preference over 'Class-II local supplier' as per para 3A(c) of the order.The 'Class-I local supplier' / 'Class-II local supplier' at the time of bidding shall be required to indicate percentage of local content and provide self-certificate that the item offered meets the local content requirement for 'Class-I local supplier'/ 'Class-II local supplier', as the case may be. They shall also give details of the location(s) at which the local value addition is made. However, at the time of execution of the project, for all contracts above INR 10 crore, the contractor shall be required to give local content certification duly certified by cost/chartered accountant in practice as per the order.Bidder shall provide self-certificate for purchase preference under Make in India policy in the prescribed format as per Annexure-MII, if the required details are not provided, then the bidder shall be considered as 'Non-local supplier' and its offer shall be rejected. ( Click here to download Format)
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderes are required to submit a copy of cancelled cheque in order to release earnest money in their account directly in case of unsuccessful tenderer.
Tenderer should upload the scan copy of all documents relating to Eligibility criteria along with their offer such as mandatory credentials Experience / completion certificates, turnover certificates in prescribed format and all other mandatory documents such as Certificate of incorporation, MOA/AOA, partnership deed, power of attorney, board resolutions, PAN or any other documents as applicable.
Rehabilitation of wagons 400 Nos. at C&W NKJ
JBP-M-Tender-24-2026~WCR
JBP-M-Tender-24-2026
Open
Works - General
26 Months
Jabalpur, Madhya Pradesh
₹0
₹52.8 L
18 Aug 2026
18 Aug 2026
26 Aug 2026
133 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 26,38,80,761.54 | ||
| — | 250.00 | — | — | ||
| Supply of Body side arrangement for BOXNHL (2D) wagons as per RDSO Drg.No. WD- 22093-S-05, Alt-3 or latest. | — | — | — | 6,15,51,750 | |
| — | 250.00 | — | — | ||
| Stripping,surface preparation,Setting & Welding of 01 Side body arrangement including top corner gussets, stiffener,covering plate, with door & fittings (Flap door chainless cotter modified,cotter rivets, bracket for Locking bolt, locking bolt for door, Door hinge foots,Door check spring etc.), repair to oblong holes insole bar by providing sole bar inside patch, Lock bolting of side bodystanchions with sole bar,corner stanchion with solebar. | — | — | — | 37,50,242.5 | |
| — | 12400.00 | — | — | ||
| Supply of Lock bolt with collar Dia 12.70 mm (1612) grip range 19.05 mm- 25.4 mm Conforming to RDSO Specn. No. IS/RDSO-WD/0001:2022. | — | — | — | 3,13,596 | |
| — | 9000.00 | — | — | ||
| Supply of Lock bolts with collar Dia 12.70 mm (1616) grip range 25.4 mm-31.75 mm Conforming to RDSO Specn. No. IS/RDSO-WD/0001:2022. | — | — | — | 2,36,610 | |
| — | 400000.00 | — | — | ||
| Supply of SS sheet (4 mm) for Floor, Side body and end body patches | — | — | — | 6,27,76,000 | |
| — | 4000000.0 0 | — | — | ||
| Repair of corroded, broken & cracked End/Side wall portion,floor portion of wagons by replacement with new 4 mm thick SS patches of standard size. It will include removal of old patches, surface preparation and fixing of new patches,as per RDSO Drawing No.-WD-09034-S- 04,S-05, S-06, S-19 & S-23 | — | — | — | 1,44,40,000 | |
| — | 2000.00 | — | — | ||
| Removal of old and Supply and fitment of half (L=650) body side stanchion with provision of holes and lock bolting of BOXNHL wagon as per Drg. NoWD-09034-S-17,alt-03 or latest. | — | — | — | 1,21,95,500 | |
| — | 300.00 | — | — | ||
| Body bulged out repair of wagons | — | — | — | 3,97,365 | |
| — | 800.00 | — | — | ||
| Supply and fitment of 01 No of reduced height door with door hinge pin and washer for BOXNHL wagons as RDSO Drg. WD-23018-S-02 | — | — | — | 55,11,576 | |
| — | 400.00 | — | — | ||
| Supply and fitment of New Doorway stiffening Cross Bar,as per RDSO Drawing No.WD- 23018-S-02 for reduced height door | — | — | — | 13,63,848 | |
| — | 3200.00 | — | — | ||
| Supply and fitment of Flap door chainless cotter (1 no) and flap door chainless cotter rivet (2 nos) as per WD- 23018-S-02 for reduced height door | — | — | — | 7,96,992 | |
| — | 3200.00 | — | — | ||
| Removal of damaged door locking bolt & bracket and their supply & fitment as per drg. WD- 23018-S-02 Item No.1,2a & 2b for reduced height door | — | — | — | 7,12,192 | |
| — | 1200.00 | — | — | ||
| Supply and Replacement of damaged door hinge foot with lock bolt, as per RDSO Drawing No WD- 23018-S-02 for reduced height door Item | — | — | — | 7,11,516 | |
| — | 1600.00 | — | — | ||
| Removal of damaged door check spring and supply and fitment of new door check spring with lock bolt as per RDSO Drawing No. WD-23018-S-02 for reduced height door. | — | — | — | 12,81,040 | |
| — | 200.00 | — | — | ||
| Supply & Replacement of broken corner stanchion, as per RDSO drg.No.-WD-09034- S- 06 & S-22 | — | — | — | 7,44,008 | |
| — | 400.00 | — | — | ||
| Repair of corner stanchion | — | — | — | 1,14,104 | |
| — | 1000.00 | — | — | ||
| Repair of top corner (with supply and fitment/replacement of Top corner gusset,Corner stiffener, Top Coping End cover plate etc) as per RDSO Drawing No.-WD09034-S-06. | — | — | — | 27,10,220 | |
| — | 400.00 | — | — | ||
| Repair of cracked/broken body bolster as per RDSO Drg No. 09034-S- 04 | — | — | — | 40,59,440 | |
| — | 40000.00 | — | — | ||
| Fitment of various CRF sections like floor stringers, top copings (side and end),side middle coping (door way), crib angle (50x50x5) & side middle coping (71x40 x 4), cross stringers of wagon body by replacement with new CRF sections. Itwill include removal of old CRF sections, surface preparation and fixing of newsections, as per RDSO Drawing No.- WD- 09034-S- 04, S-05 & S-22 | — | — | — | 1,18,04,000 | |
| — | 149600.00 | — | — | ||
| Supply of various CRF sections to execute the work in schedule 19 | — | — | — | 1,62,52,544 | |
| — | 2000.00 | — | — | ||
| Supply of steel item for miscellaneous items not covered in above schedule (Twin Hook, T. Roap clit, Label holder, Foot step, Porter handle, 8 mm plate, 6mm plate etc. @ 5 kg/wagon | — | — | — | 1,70,420 | |
| — | 800.00 | — | — | ||
| Supply of Cross Bar 6 mm (inner) to RDSO Drg No. WD-09034-S-4, Item no.3 orLatest | — | — | — | 32,39,808 | |
| — | 800.00 | — | — | ||
| Supply of Cross Bar 6 mm (outer) to RDSO Drg No.WD-09034-S-4, Item no.4 orLatest | — | — | — | 32,41,696 | |
| — | 1600.00 | — | — | ||
| Stripping,surface preparation,setting & welding of cross bars (inner & outer) etc | — | — | — | 46,72,864 | |
| — | 40.00 | — | — | ||
| Supply of Head stock to RDSO Drg No. WD-09034-S-4, Item no.11, 8 mm thick LH or Latest | — | — | — | 2,70,998 | |
| — | 40.00 | — | — | ||
| Supply of Head stock to RDSO Drg No. WD-09034-S-4, Item no.11, 8 mm thick RH or Latest. | — | — | — | 2,70,998 | |
| — | 80.00 | — | — | ||
| Stripping,surface preparation,setting & welding of headstock (LH or RH) etc. | — | — | — | 1,25,384.8 | |
| — | 400.00 | — | — | ||
| Supply and fitment of Auxiliary Reservoir suspension Strap to RDSO Drg No.WD- 09034-S-20 item no 1 or Latest | — | — | — | 72,588 | |
| — | 400.00 | — | — | ||
| Supply and fitment of Auxiliary Reservoir supporting Bracket to RDSO Drg No.WD- 09034-S-16 item no 1 or Latest( IRSM-44) | — | — | — | 1,82,764 | |
| — | 100.00 | — | — | ||
| Supply of Hanger Bracket for BOXNHL wagon as per RDSO Drg.no.-WD-09034-S-13, item no.-06, Alt.-01 (For bearing piece) | — | — | — | 42,480 | |
| — | 200.00 | — | — | ||
| Supply and fitment of Bogie Center Pivot top modified BOXNHL (Flat) to RDSO Drg No. WD-97049-S/3 Alt-9 item no.2 or Latest | — | — | — | 21,70,216 | |
| — | 100.00 | — | — | ||
| Supply and fitment of Center Pivot Pin 215 mm to RDSO Drg No. WD-97049-S/3Alt-9 item no.6 or Latest | — | — | — | 47,107 | |
| — | 1600.00 | — | — | ||
| Supply of 7/8" (22.2 MM) DIA BULL LOCK BOLT PIN (ROUND HEAD) & COLLARZINC PLATED (STANDARD), 2832, GRIP RANGE 2.000" - 2.250" (50 - 57 MM)CONFIRMING TO SPEC IS/RDSO-WD/0001:2022 OF JUNE 2022. (8 Nos per pivot) | — | — | — | 1,84,528 | |
| — | 800.00 | — | — | ||
| Supply and fitment of Rehabilation Plate as per Drg No. W/ML-14 (2 per wagon) | — | — | — | 1,23,248 | |
| — | 400.00 | — | — | ||
| Supply of Locking Bracket (Z-bracket) for Cut Off Angle Cock to RDSO Drg. No. WD- 08008-S-20, Item No. 3, Alt.02 | — | — | — | 75,520 | |
| — | 18000.00 | — | — | ||
| Stenciling/marking of BOXNHL wagons as per RDSO specification no.-WD-02- BOXNHL/BCNHL/Paint-2016 Oct-2016 or latest and RDSO Drawing No.WD-08008- S-07 or latest. | — | — | — | 58,47,480 | |
| — | 400.00 | — | — | ||
| Manpower cost for complete cleaning of wagon & disposal of scrap material along with overall supervision.(Item qty in wagons) | — | — | — | 9,58,076 | |
| — | 400.00 | — | — | ||
| Supply of Draft Gear Arrangement including Draft Gear Follower forBCNHL/BOXNHL Wagon DRG. No.:-WD-81010-S-03, Alt-13 item No. 19, SpecnNo:-WD-71-BD-15 (Rev.01). | — | — | — | 1,84,08,000 | |
| — | 200.00 | — | — | ||
| Supply of Coupler Body with Shank Wear Plate to Drg. No. SK-62724, Item-1 &10, Alt- 31 and RDSO STR No.WD-70-BD-10, Rev-4 of Nov' 2024 | — | — | — | 82,56,696 | |
| — | 200.00 | — | — | ||
| Supply of Knuckle to RDSO drg. no. SK-62724 Alt.-31, item-2, Material and Spec.as per drg. and also confirm with STR no WD-70-BD-10 Rev-04. | — | — | — | 17,94,780 | |
| — | 400.00 | — | — | ||
| Supply of Knuckle Pin with anti-theft cotter pin to Drg. No. SK-62724, Item-4,Alt-31. RDSO STR No. WD-70-BD-10, Rev-4 of Nov'2024 | — | — | — | 1,60,008 | |
| — | 40.00 | — | — | ||
| Supply of Yoke for Upgraded High Tensile Centre Buffer Coupler for BOXNHL/BCNHL Wagon to RDSO Drawing No. SK-62724, Alt. 31, Item No. 3,confirming to RDSO Specification No. WD- 70-BD-10 [Rev-4] | — | — | — | 8,44,880 | |
| — | 40.00 | — | — | ||
| Supply of Yoke Pin as per RDSO's DRG. No. SK-62724, Alt-31, Item - 12 & Specification No. WD-70BD-10, Rev-4 of Nov' 2024. | — | — | — | 52,297.6 | |
| — | 160.00 | — | — | ||
| Supply of COUPLER ROD FOR BOXNHL WAGON TO RDSO DRG. NO.WD-09034-S-13, ALT. 04, ITEM NO. 01. | — | — | — | 87,225.6 | |
| — | 200.00 | — | — | ||
| Supply of Lock to RDSO Drg. No.SK-62724 Alt-31, item-8, Matl. & Spec. As per RDSO STR no. WD-70BD-10 Rev-04. | — | — | — | 2,80,132 | |
| — | 200.00 | — | — | ||
| Supply of BEARING PIECE ASSEMBLY FOR UNCOUPLING GEAR ARRANGEMENTTO RDSO DRG NO WD00046-S-01, ALT. 7, ITEM NO 4, 5,6 & 7 | — | — | — | 53,336 | |
| — | 80.00 | — | — | ||
| Supply of Rotary Bottom operated articulated Lock assembly components for Upgraded High Tensile CBC to RDSO DRG.NO. SK-62724, ALT.-31, ITEM-5, 6 &7.Other technical requirements conforming to RDSO Specification No.WD-70-BD-10, Rev.04 of November-2024 | — | — | — | 60,982.4 | |
| — | 200.00 | — | — | ||
| Replacement of defective/worn out CBC components (striker casting wear plate,shank plate, knuckle, lock,assembly. Knuckle pin,operating rod, Bearing piece,Knuckle thrower) (replacement of one or all items). (Item Qty. is no.of wagons) | — | — | — | 71,330 | |
| — | 200.00 | — | — | ||
| Replacement/refitment of Coupler body | — | — | — | 1,68,638 | |
| — | 400.00 | — | — | ||
| Replacement of Draft gear/front follower/yoke(replacement of one or allitems)with fitment/replacement of coupler body | — | — | — | 7,97,476 | |
| — | 4800.00 | — | — | ||
| Supply of 7/8" (22.2 MM) DIA BULL LOCK BOLT PIN (ROUND HEAD) & COLLARZINC PLATED (STANDARD),2820, GRIP RANGE 1.250" - 1.500" (31 - 38 MM)CONFIRMING TO SPEC IS/RDSOWD/0001:2022 of June 2022. | — | — | — | 3,78,912 | |
| — | 2400.00 | — | — | ||
| Supply of 7/8" (22.2 MM) DIA BULL LOCK BOLT PIN (ROUND HEAD) & COLLARZINC PLATED (STANDARD),2824 GRIP RANGE 1.500" - 1.750" (37 - 44 MM)CONFIRMING TO SPEC IS/RDSOWD/ 0001:2022 of June 2022. | — | — | — | 2,03,904 | |
| — | 2160.00 | — | — | ||
| Supply of 3/4 INCH (19.1 MM) DIA BULL LOCK BOLT PIN (ROUND HEAD) &COLLAR ZINC PLATED (STANDARD),2420 , GRIP RANGE 1.250" - 1.500" (31 - 38MM), CONFIRMING OTHER TECHNICAL REQUIREMENTS AS PER RDSO DRG. NO.WD-11036-S-01 ALT-1 AND WD-11036-S-02 ALT- NIL. CONFIRMING TO SPECIS/RDSO-WD/0001:2022 of June 2022 | — | — | — | 1,22,083.2 | |
| — | 2160.00 | — | — | ||
| Cost for Lock Bolting | — | — | — | 88,408.8 | |
| — | 1600.00 | — | — | ||
| Supply of Epoxy Zinc Phosphate Primer (Two packs), to Drawing / SpecifcationChapter II of RDSO Spec. No. M&C/PCN/100/2018 with RDSO's amendment No.1B (Rev.2.0) as an additional requirement. Colour shade: RAL-7012 | — | — | — | 2,95,456 | |
| — | 1600.00 | — | — | ||
| Supply of PU Paint (Two pack), Colour shade- Gentian Blue (RAL-5010) conforming to RDSO Spec. No. M&C/PCN/109/2020 Rev.1 with RDSOs amendment no.1B as an additional requirement | — | — | — | 2,69,984 | |
| — | 400.00 | — | — | ||
| labour cost for painting of one complete wagon | — | — | — | 13,92,936 | |
| — | 1600.00 | — | — | ||
| Supply of Top Side Bearer Liner to RDSO Drg. No. WD-80007-S-08, Alt.No.8, ItemNo.- 4, and Material conforming to IS: 3885-1992 Part-I with amendment 1 and2, Grade-IV, 380-420 BHN. | — | — | — | 19,21,984 | |
| — | 3200.00 | — | — | ||
| Supply of M 20X100 LONG CSK HD SCREW, FULL THREAD WITH NUTCONFIRMING TO IS: 1365-2005 & MATERIAL TO IS: 1367-2017 PATR (III)PROPERTY CLASS 4.8 (FOR BOXN WAGON) TO RDSO DRG. NO. WD-85079-S-1,ALT-16, ITEM-13 | — | — | — | 1,00,768 | |
| — | 1600.00 | — | — | ||
| Fitment cost of Top side liner (item quantity in no. of top side liner) | — | — | — | 4,37,120 | |
| — | 2.00 | — | — | ||
| Manipulators Bogie Frame consist of Supply including packing and transportation, inspection, installation including foundation work,commissioning and handing over to the consignee complete in all respects including Training of Wagon Bogie Frame. | — | — | — | 16,87,400 | |
| — | 2.00 | — | — | ||
| Supply, installation and commissioning of Electrically operated Bolster Manipulators For CASNUB Bogie as per attached specification in scope of work | — | — | — | 12,08,926.04 | |
| — | 5.00 | — | — | ||
| Battery Operated Impact Wrench, 1/2 inch square drive, 1700 NM with 02 NosLi-ion Battery-40V-4 Ah and 01 No Charger having features & Specification as per attached Technical Specification | — | — | — | 4,10,050 | |
| — | 2.00 | — | — | ||
| Battery Operated Cordless Torque Wrench, 1/2 Inch Square Drive Along With Sockets (Adapters) as per attached specification in scope of work | — | — | — | 5,27,065.88 | |
| — | 2.00 | — | — | ||
| Set of Special tool kit for KEO type DV consists of 9 items as per attached specification in scope of work | — | — | — | 83,282.04 | |
| — | 2.00 | — | — | ||
| Set of Special Tools and Fixtures for C3W and C3W2 type DV consisting of 8 Items as per attached specification in scope of work | — | — | — | 2,97,980.68 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
CheckListforBankGuarantee.pdf
ATTACHMENT
GCC_April-2022.pdf
ATTACHMENT
ExemptioninEligibilitycriteriatoOEMandRSDOapprovedsources.pdf
ATTACHMENT
Letterofcredit.pdf
ATTACHMENT
Letterforshramikkalyanportal.pdf
ATTACHMENT
AnnexureVIBTurnoverCertificate.pdf
ATTACHMENT
Letterofcontractorse-MB.pdf
ATTACHMENT
WorkonHand-BIDCapacityabove20Cr.pdf
ATTACHMENT
CheckListforBankGuarantee_1.pdf
ATTACHMENT
AnnexureVIBidCapacityabove20Cr.pdf
ATTACHMENT
RDSOGuidelineforBOXNHLrepair.pdf
ATTACHMENT
ACS1to11ofGCC2022_1.pdf
ATTACHMENT
ACS12ofGCCWORKS2022_compressed.pdf
ATTACHMENT
Scopeofwork_RehabilitationofwagonsNKJWCR.pdf
ATTACHMENT
RefdrgforBogiemanipulator.pdf
ATTACHMENT
RefdrgforBolastermanipulator.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].