e-Quotation No.5 for 2022-23

Amount

For Steel Structure / TMT -Providing & Applying DuraClean- WR is an organic polymer for conversion of unwanted substrate (Burr) on metal surface crystal structure modification to remove oxide by high pressure waterjet cleaning / grinding, wire brush, washing or mopping also removing loose particles (using other mechanical / manual means). Measure the burr on the surface by burr measuring gauge, If the burr is above 25 microns repeat the cleaning till burr is below 25 microns. Apply DuraCap is a unique one-pack cold metalizing process consisting of blend of active Ceramic, Alumina and modified Polymer. DuraCap forms a Dot Matrix Coating on the surface, which gives better adhesion with substrates. Apply 2 coats with a thickness upto 40 micron on prepared metal surface. DuraCap ensures good corrosion resistance, it's a weldable primer also work as a UV reflector etc. as per manufacturer's specification ( using other manual / mechanical means). After primer application base coat is done which is named as DuraGuard a 3 pack system , This is a blend of water miscible epoxy and gives properties like Ant rodent, high corrosion resistance, chemical resistance as well as high abrasion & impact resistance etc. as per manufacturer's specification ( using other manual / mechanical means)For Concrete Surface - Providing & Applying impermeable, high compressive strength, monolithic application, excellent bond strength, high abrasion resistance, UV resistance, self-curing, non-toxic polymer based cementitious mortar named as Poly Ironite Ceramic Cementitious (PICC) of Dimple Chemicals & Services Pvt. Ltd. which consists of Nicomix Series + 53 Grade Cement + Water for resurfacing of concrete surfaces to a thickness upto 10 mm or as per surface conditions and also treatment of honey combing areas etc. Cleaning will be done by remove all loose particles, dust particles or any other foreign material/particles using manual or mechanical means. After that, clean the concrete surface with special chemical named as Steripure 10 of Dimple Chemicals & Services Pvt. Ltd. for removing of algae fungi followed by High Pressure Water Jet and Compressed Air blower. Apply bond coat a Water Miscible epoxy named as Kelox R 101 + Kleox H 404 of Dimple Chemicals & Services Pvt. Ltd. (using manual/mechanical means) before PICC application, it ensure strong adhesion with old surface to new PICC mortar. Complete as per specification including cost of all materials, machinery, labour, Scaffolding, insurance charges as directed by the Engineer in charge.

Providing & grouting by Poly Ceramic Cementitious of Dimple Chemicals & Services Pvt. Ltd. which consists of NicGrout G 06 + 53 Grade Cement + water as per requirement to reduce the porosity of concrete / Masonry structure and to increase the strength of structure using grouting pipes, grouting m/c, mixer etc and all relevant safety with all leads and lifts, material, machinery, labour, Scaffolding etc. Complete as per specification and as directed by Engineer-in-Charge.

Top Terrace Waterproofing -- Providing & Applying impermeable, high compressive strength, monolithic application, excellent bond strength, high abrasion resistance, UV resistance, self-curing, non-toxic polymer based cementitious waterproofing mortar named as Poly Ironite Ceramic Cementitious (PICC) of Dimple Chemicals & Services Pvt. Ltd. which consists of Nicomix Series + 53 Grade Cement + Water for waterproofing of concrete surfaces of terrace to a thickness upto 5 mm or as per surface conditions and also treatment of honey combing areas etc. Cleaning of existing terrace surface upto mother slab will be done by remove all loose particles, dust particles or any other foreign material/particles using manual or mechanical means. After that, clean the concrete surface with special chemical named as Steripure 10 of Dimple Chemicals & Services Pvt. Ltd. for removing of algae fungi followed by High Pressure Water Jet and Compressed Air blower. Apply bond coat a Water Miscible epoxy named as Kelox R 101 + Kelox H 404 of Dimple Chemicals & Services Pvt. Ltd. (using manual/mechanical means) before PICC application, it ensure strong adhesion with old surface to new PICC mortar. After PICC apply a poly ceramic Cementitious top coat i.e NicCoat Pc + kelmer A 60 of Dimple Chemicals & Services Pvt. Ltd after finishing, After Top Coat Application, PCC will be done up to 50 mm thickness (OR as per site condition) of desire slope to drain the water and kept ponded for continuous period of 3 days to detect any seepage / leakage/ dampness if any, the surface then shall be cleared, complete as per specification including cost of all materials, machinery, labour, Scaffolding, insurance charges as directed by the Engineer in charge.

Providing & Applying impermeable, high compressive strength, monolithic application, excellent bond strength, high abrasion resistance, UV resistance, self-curing, non-toxic polymer based cementitious mortar named as Poly Ironite Ceramic Cementitious (PICC) of Dimple Chemicals & Services Pvt. Ltd. which consists of Nicomix Series + 53 Grade Cement + Water for resurfacing of concrete surfaces to a thickness upto 10 mm or as per surface conditions etc. Cleaning will be done by remove all loose particles, dust particles or any other foreign material/particles using manual or mechanical means. After that, clean the concrete surface with special chemical named as Steripure 10 of Dimple Chemicals & Services Pvt. Ltd. for removing of algae fungi followed by High Pressure Water Jet and Compressed Air blower. Apply bond coat a Water Miscible epoxy named as Kelox R 101 + Kelox H 404 of Dimple Chemicals & Services Pvt. Ltd. (using manual/mechanical means) before PICC application, After PICC apply a poly ceramic cementitious top coat i.e NicCoat Pc + kelmer A 60 of Dimple Chemicals & Services Pvt. Ltd after finishing it ensure strong adhesion with old surface to new PICC mortar. Complete as per specification including cost of all materials, machinery, labour, insurance charges as directed by the Engineer in charge.

Providing & grouting by Poly Ceramic Cementitious of Dimple Chemicals & Services Pvt. Ltd. which consists of NicGrout G 06 + 53 Grade Cement + water as per requirement to reduce the porosity of concrete / Masonry structure and to increase the strength of structure using grouting pipes, grouting m/c, mixer etc and all relevant safety with all leads and lifts, material, machinery, labour, Scaffolding etc. Complete as per specification and as directed by Engineer-in-Charge.

Removal of Vegetation/Plants:- Removal of Vegetation & Plants by its roots from the entire surface of bridge with manual or mechanical means. After removal of vegetation & plants, roots shall be treated with special chemical i.e. Steripure MBT 20 of Dimple Chemicals & Services Pvt. Ltd. Top 50 mm shall filled with high strength grout (NicGrout G 06 of Dimple chemicals & Services Pvt. Ltd+ Cement 53 Grade) including cost of all material, machinery, labour, scaffolding, etc.as per specification and as directed by Engineer-in-Charge.

Providing & Applying DuraClean- WR is an organic polymer for conversion of unwanted substrate (Burr) on metal surface crystal structure modification to remove oxide by high pressure waterjet cleaning / grinding, wire brush, washing or mopping also removing loose particles (using other mechanical / manual means). Measure the burr on the surface by burr measuring gauge, If the burr is above 25 microns repeat the cleaning till burr is below 25 microns. Apply DuraCap is a unique one-pack cold metalizing process consisting of blend of active Ceramic, Alumina and modified Polymer. DuraCap forms a Dot Matrix Coating on the surface, which gives better adhesion with substrates. Apply 2 coats with a thickness upto 40 micron on prepared metal surface. DuraCap ensures good corrosion resistance, it's a weldable primer also work as a UV reflector etc. as per manufacturer's specification ( using other manual / mechanical means). After primer application base coat is done which is named as DuraGuard a 3 pack system , This is a blend of water miscible epoxy and gives properties like Ant rodent, high corrosion resistance, chemical resistance as well as high abrasion & impact resistance etc. as per manufacturer's specification ( using other manual / mechanical means) complete as per specification including cost of all materials, machinery, labour, insurance charges as directed by the Engineer in charge.

Providing & Applying impermeable, high compressive strength, monolithic application, excellent bond strength, high abrasion resistance, UV resistance, self-curing, non-toxic polymer based cementitious mortar named as Poly Ironite Ceramic Cementitious (PICC) of Dimple Chemicals & Services Pvt. Ltd. which consists of Nicomix Series + 53 Grade Cement + Water for resurfacing of concrete surfaces to a thickness upto 10 mm or as per surface conditions and also treatment of honey combing areas, Lift Joints etc. Cleaning will be done by remove all loose particles, dust particles or any other foreign material/particles using manual or mechanical means. After that, clean the concrete surface with special chemical named as Steripure 10 of Dimple Chemicals & Services Pvt. Ltd. for removing of algae fungi followed by High Pressure Water Jet and Compressed Air blower. Apply bond coat a Water Miscible epoxy named as Kelox R 101 + Kelox H 404 of Dimple Chemicals & Services Pvt. Ltd. (using manual/mechanical means) before PICC application, it ensure strong adhesion with old surface to new PICC mortar. Complete as per specification including cost of all materials, machinery, labour, Scaffolding, insurance charges as directed by the Engineer in charge.

Providing & Applying impermeable, high compressive strength, monolithic application, excellent bond strength, Anti-Skid, high abrasion resistance, UV resistance, self-curing, non-toxic polymer based cementitious mortar named as Poly Ironite Ceramic Cementitious (PICC) of Dimple Chemicals & Services Pvt. Ltd. which consists of Nicomix Series + 53 Grade Cement + Water for resurfacing of concrete road surfaces to a thickness upto 15 mm or as per surface conditions and also treatment of pot holes, cracks etc. Cleaning will be done by remove all loose particles, dust particles or any other foreign material/particles using breaker, wire brush, high pressure water jet, Compressed Air jet (manual or mechanical means). Apply bond coat a Water Miscible epoxy named as Kelox R 101 + kelox H 404 of Dimple Chemicals & Services Pvt. Ltd. (using manual/mechanical means) before PICC application, it ensure strong adhesion with old surface to new PICC mortar. Complete as per specification including cost of all materials, machinery, labour, insurance charges as directed by the Engineer in charge.

Providing & Applying impermeable, high compressive strength, monolithic application, excellent bond strength, Anti-Skid, high abrasion resistance, UV resistance, self-curing, non-toxic polymer based cementitious mortar named as Poly Ironite Ceramic Cementitious (PICC) of Dimple Chemicals & Services Pvt. Ltd. which consists of Nicomix Series + 53 Grade Cement + Water for resurfacing of concrete surfaces to a thickness upto 25 mm or as per surface conditions and also treatment of honey combing areas etc. Cleaning will be done by remove all loose particles, dust particles or any other foreign material/particles using breaker, wire brush, high pressure water jet, Compressed Air jet (manual or mechanical means). Apply bond coat a Water Miscible epoxy named as Kelox R 101 + Kelox H 404 of Dimple Chemicals & Services Pvt. Ltd. (using manual/mechanical means) before PICC application, it ensure strong adhesion with old surface to new PICC mortar. Complete as per specification including cost of all materials, machinery, labour, insurance charges as directed by the Engineer in charge.

Providing and applying Poly Ironite Ceramic Cementitious (PICC) of Dimple Chemicals & Services Pvt. Ltd ensure self curing, high abrasion resistant, non-shrink, high compressive strength, low porosity, UV resistant coating mortar on existing well GSB of 100 mm thickness, get compacted and levelled ,cure the surface then applying self curing coating PICC mortarin properation of 1;1 ( Nicomix series : metal) for 50 mm thickness after stamp the surface by special concrete stamping mould as per specified texture and colour etc. Next day apply finish coat of Kelmer A60 of Dimple chemical & Services Pvt. Ltd complete with all leads and lifts, Material, Machinery, Labour etc. complete as per specification and as directed by engineer-in-charge. (Note- GSB , Colour & Stamping rates not included in this RA)

Masonry Bridge repair work:- Providing & Applying impermeable, high compressive strength, monolithic application, excellent bond strength, Anti-Skid, high abrasion resistance, UV resistance, self-curing, non-toxic polymer based cementitious mortar named as Poly Ironite Ceramic Cementitious (PICC) of Dimple Chemicals & Services Pvt. Ltd. which consists of Nicomix Series + 53 Grade Cement + Water for T-Pointing to a depth upto 50 mm or as per surface conditions and raised on stone etc. Cleaning will be done by remove all loose particles, dust particles or any other foreign material/particles using manual or mechanical means. After that, clean the joints with special chemical named as Steripure 10 of Dimple Chemicals & Services Pvt. Ltd. for removing of algae fungi followed by High Pressure Water Jet and Compressed Air blower. Apply bond coat a Water Miscible epoxy named as Kelox R 101 + Kelox H 404 of Dimple Chemicals & Services Pvt. Ltd. (using manual/mechanical means) before PICC application, it ensure strong adhesion with old surface to new PICC mortar. Top Coat will be done with Kelmer A 60 + NicCoat PC on PICC to seal the surface and reduce the porosity etc complete as per specification including cost of all material, machinery, labour, scaffolding, transportation etc. with all leads and lifts as directed by the engineer-in-charge.

Providing & grouting by Poly Ceramic Cementitious of Dimple Chemicals & Services Pvt. Ltd. which consists of NicGrout G 06 + 53 Grade Cement + water as per requirement to reduce the porosity of concrete / Masonry structure and to increase the strength of structure using grouting pipes, grouting m/c, mixer etc and all relevant safety with all leads and lifts, material, machinery, labour, Scaffolding etc. Complete as per specification and as directed by Engineer-in-Charge.

Removal of Vegetation/Plants:- Removal of Vegetation & Plants by its roots from the entire surface of bridge with manual or mechanical means. After removal of vegetation & plants, roots shall be treated with special chemical i.e. Steripure MBT 20 of Dimple Chemicals & Services Pvt. Ltd. Top 50 mm shall filled with high strength grout (NicGrout G 06 of Dimple chemicals & Services Pvt. Ltd+ Cement 53 Grade) including cost of all material, machinery, labour, scaffolding, etc.as per specification and as directed by Engineer-in-Charge.

Providing & Applying DuraClean- WR is an organic polymer for conversion of unwanted substrate (Burr) on metal surface crystal structure modification to remove oxide by high pressure waterjet cleaning / grinding, wire brush, washing or mopping also removing loose particles (using other mechanical / manual means). Measure the burr on the surface by burr measuring gauge, If the burr is above 25 microns repeat the cleaning till burr is below 25 microns. Apply DuraCap is a unique one-pack cold metalizing process consisting of blend of active Ceramic, Alumina and modified Polymer. DuraCap forms a Dot Matrix Coating on the surface, which gives better adhesion with substrates. Apply 2 coats with a thickness upto 40 micron on prepared metal surface. DuraCap ensures good corrosion resistance, it's a weldable primer also work as a UV reflector etc. as per manufacturer's specification ( using other manual / mechanical means). complete as per specification including cost of all materials, machinery, labour, insurance charges as directed by the Engineer in charge.

Providing & Applying impermeable, high compressive strength, monolithic application, excellent bond strength, Anti-Skid, high abrasion resistance, UV resistance, self-curing, non-toxic polymer based cementitious mortar named as Poly Ironite Ceramic Cementitious (PICC) of Dimple Chemicals & Services Pvt. Ltd. which consists of Nicomix Series + 53 Grade Cement + Water for filling potholes for concrete & bitumen roads to a thickness upto 75 mm in a ratio of 1:1 ( PICC mortar1 Part: Metal 6mm 1Part) or as per surface conditions and also treatment of honey combing areas etc. Cleaning will be done by remove all loose particles, dust particles or any other foreign material/particles using breaker, wire brush, high pressure water jet, Compressed Air jet (manual or mechanical means). Apply bond coat a Water Miscible epoxy named as Kelox R 101 + Kelox h 404 of Dimple Chemicals & Services Pvt. Ltd. (using manual/mechanical means) before PICC application, it ensure strong adhesion with old surface to new PICC mortar. Add Nikure 500 in to above morter for normal setting of Dimple Chemicals & Services Pvt. Ltd. Complete as per specification including cost of all materials, machinery, labour, insurance charges as directed by the Engineer in charge.

Providing & Applying impermeable, high compressive strength, monolithic application, excellent bond strength, Anti-Skid, high abrasion resistance, UV resistance, self-curing, non-toxic polymer based cementitious mortar named as Poly Ironite Ceramic Cementitious (PICC) of Dimple Chemicals & Services Pvt. Ltd. which consists of Nicomix Series + 53 Grade Cement + Water for filling potholes for concrete & bitumen roads to a thickness upto 75 mm or as per surface conditions and also treatment of honey combing areas etc. Cleaning will be done by remove all loose particles, dust particles or any other foreign material/particles using breaker, wire brush, high pressure water jet, Compressed Air jet (manual or mechanical means). Apply bond coat a Water Miscible epoxy named as Kelox R 101 + Kelox H 404 of Dimple Chemicals & Services Pvt. Ltd. (using manual/mechanical means) before PICC application, it ensure strong adhesion with old surface to new PICC mortar. Add Nikure 500 of Dimple Chemicals & Services Pvt. Ltd. on above Mortar PICC will be ready to traffic load after 1 hr Complete as per specification including cost of all materials, machinery, labour, insurance charges as directed by the Engineer in charge.

Providing and applying 30 mm thick self curing Ceramic Polymer Microconcrete of Dimple Chemicals & Services Pvt. Ltd. having Compressive strength above M30, non shrink, impermeable, filling mortar in cavities like beams, column etc. to load carrying R.C.C member in one or two layers (depending upon the site condition) on cleaned concrete surface , including honey comb area (using manual/mechanical means). Mixing mortar of Nicocil C80 and fresh 53 grade cement with required water cement ratio for desired consistency and applying and finishing by manual trowelling , curing after curing initial setting time etc, as per manufacturers specification etc. complete as per specification and as directed by engineer-in-charge.

Providing and applying Kelox R 101 (Resin) + Kelox H 404 (Hardener) a water miscible epoxy of Dimple Chemicals & Services Pvt. Ltd. for bonding old concrete to new PICC mortar, after mixing slowly in predefined ratio and applying by brush on the surface. when it is tacky then apply the PICC mortar complete as per specification and as directed by engineer-in-charge.

Providing & Applying DuraClean- WR of Dimple Chemicals & Services Pvt. Ltd. is an organic polymer for conversion of unwanted substrate (Burr) on metal surface crystal structure modification to remove oxide by high pressure waterjet cleaning / grinding, wire brush, washing or mopping also removing loose particles (using other mechanical / manual means). Measure the burr on the surface by burr measuring gauge, If the burr is above 25 microns repeat the cleaning till burr is below 25 microns. Apply DuraCap of Dimple Chemicals & Services Pvt. Ltd. is a unique one-pack cold metalizing process consisting of blend of active Ceramic, Alumina and modified Polymer. DuraCap forms a Dot Matrix Coating on the surface, which gives better adhesion with substrates. Apply 2 coats with a thickness upto 40 micron on prepared metal surface. DuraCap ensures good corrosion resistance, it's a weldable primer also work as a UV reflector etc. as per manufacturer's specification ( using other manual / mechanical means). After primer application base coat is done which is named as DuraGuard a 3 pack system of Dimple Chemicals & Services Pvt. Ltd., This is a blend of water miscible epoxy and gives properties like Ant rodent, high corrosion resistance, chemical resistance as well as high abrasion & impact resistance etc. Wrapping will be done with DuraMesh of Dimple Chemicals & Services Pvt. Ltd. After 2 to 3 hrs of wrapping apply final coat of DuraGuard when surface is tacky. This coats will give the thickness approx. 350 micron, as per manufacturer's specification ( using other manual / mechanical means) complete as per specification including cost of all materials, machinery, labour, insurance charges as directed by the Engineer in charge.

Providing & Applying DuraClean- WR of Dimple Chemicals & Services Pvt. Ltd. is an organic polymer for conversion of unwanted substrate (Burr) on metal surface crystal structure modification to remove oxide by high pressure waterjet cleaning / grinding, wire brush, washing or mopping also removing loose particles (using other mechanical / manual means). Measure the burr on the surface by burr measuring gauge, If the burr is above 25 microns repeat the cleaning till burr is below 25 microns. Apply DuraCap of Dimple Chemicals & Services Pvt. Ltd. is a unique one-pack cold metalizing process consisting of blend of active Ceramic, Alumina and modified Polymer. DuraCap forms a Dot Matrix Coating on the surface, which gives better adhesion with substrates. Apply 2 coats with a thickness 40 micron on prepared metal surface. DuraCap ensures good corrosion resistance, it's a weldable primer also work as a UV reflector etc. as per manufacturer's specification ( using other manual / mechanical means). After primer application Base coating is done which is named as Bituminous Epoxy of Dimple Chemicals & Services Pvt. Ltd. a 2 pack system, Kelox RB5050 & Kelox RH4040 This is a blend of rapid setting Bitumen emulsion and water miscible epoxy i.e. modified epoxy resin and special hardener. Wrapping will be done with DuraMesh of Dimple Chemicals & Services Pvt. Ltd. gives properties like Ant rodent, high corrosion resistance, chemical resistance as well as abrasion & impact resistance followed by top coat with Bituminous Epoxy. This coating gives better performance as compare to coatings specified in IS 10221 . Apply 2 coats with a thickness 1mm ( Bituminous Epoxy + DuraMesh+ Bituminous Epoxy)as per manufacturer's specification ( using other manual / mechanical means) complete as per specification including cost of all materials, machinery, labour, insurance charges as directed by the Engineer in charge.

Providing & Applying DuraClean- WR of Dimple Chemicals & Services Pvt. Ltd. is an organic polymer for conversion of unwanted substrate (Burr) on metal surface crystal structure modification to remove oxide by high pressure waterjet cleaning / grinding, wire brush, washing or mopping also removing loose particles (using other mechanical / manual means). Measure the burr on the surface by burr measuring gauge, If the burr is above 25 microns repeat the cleaning till burr is below 25 microns. Apply DuraCap of Dimple Chemicals & Services Pvt. Ltd. is a unique one-pack cold metalizing process consisting of blend of active Ceramic, Alumina and modified Polymer. DuraCap forms a Dot Matrix Coating on the surface, which gives better adhesion with substrates. Apply 2 coats with a thickness 40 micron on prepared metal surface. DuraCap ensures good corrosion resistance, it's a weldable primer also work as a UV reflector etc. as per manufacturer's specification ( using other manual / mechanical means) After primer application final coating is done which is named as Bituminous Epoxy of Dimple Chemicals & Services Pvt. Ltd. a 2 pack system Kelox RB 5050 Kelox RH 4040, This is a blend of rapid setting Bitumen emulsion and water miscible epoxy i.e. modified epoxy resin and special hardener. Apply 2 coats with a thickness of 300 micron on prepared metal surface etc. It gives properties like Ant rodent, high corrosion resistance, chemical resistance as well as high abrasion & impact resistance, corrosion protection etc. as per manufacturer's specification ( using other manual / mechanical means) complete as per specification including cost of all materials, machinery, labour, insurance charges as directed by the Engineer in charge.

Providing & Applying DuraClean- WR of Dimple Chemicals & Services Pvt. Ltd. is an organic polymer for conversion of unwanted substrate (Burr) on metal surface crystal structure modification to remove oxide by high pressure waterjet cleaning / grinding, wire brush, washing or mopping also removing loose particles (using other mechanical / manual means). Measure the burr on the surface by burr measuring gauge, If the burr is above 25 microns repeat the cleaning till burr is below 25 microns. Apply DuraCap of Dimple Chemicals & Services Pvt. Ltd. is a unique one-pack cold metalizing process consisting of blend of active Ceramic, Alumina and modified Polymer. DuraCap forms a Dot Matrix Coating on the surface, which gives better adhesion with substrates. Apply 2 coats with a thickness upto 40 micron on prepared metal surface . DuraCap ensures good corrosion resistance, it's a weldable primer also work as a UV reflector etc. Also reduces frictional resistance to flow of water. as per manufacturer's specification ( using other manual / mechanical means) complete as per specification including cost of all materials, machinery, labour, insurance charges as directed by the Engineer in charge.

WATER PROOFING OF SWIMMING POOL -- Providing and applying impermeable, monolithic application, UV resistant, Self curing, non toxic, high compressive strength, non shrink, polymer based Cementitious waterproofing mortar named as Poly Ironite Ceramic Cementitious (PICC) which consists of Nicomix Series + 53 Grade Cement + Water of Dimple Chemicals & Services Pvt. Ltd. for resurfacing the concrete surfaces of swimming pool to a thickness upto 10 mm or as per surface condition and also treatment of lift joints and honey combing areas, potholes etc. by removing loose material, dust particles, grout slurry by breaking it with manual / mechanical means. Removing of existing embedded M.S. bar if any, Cleaning the lift joints, honey combing areas and entire surface with special chemical named as Steripure 10 of Dimple Chemicals & Services Pvt. Ltd. for removal of algae - fungi followed with high pressure water jet. Apply bond coat named as Kelox R 101 + Kelox H 404 which is water miscible epoxy of Dimple Chemicals & Services Pvt. Ltd. before PICC application for suitable bond between old surface to new PICC mortar and then do the PICC application providing with Top coat of NicCoat PC + Kelmer A 60 of Dimple Chemicals & Services Pvt. Ltd. after finishing, complete as per specification including materials, machinery, labour , insurance charges transportation with all leads and lifts as directed by the Engineer in charge

Providing and applying DuraBond of Dimple Chemicals & Services Pvt. Ltd. is a unique blend of Organic and Inorganic materials consisting Ceramic Ironite, Active Ceramic, Cement and water miscible modified Epoxy. As this contain water miscible Epoxy, can be applied on wet surface with better bond strength between old concrete and waterproofing coating material for external Surface of Building. Crack filling will be done by DuraGuard of Dimple Chemicals & Services Pvt. Ltd, having Cold Weldling Properties which cn "Stick anything to anything". Surface Cleaning is done to remove loose material, Dust Particles by breaking using manual and / or mechanical means, cleaning the cracks, small potholes and Surface Preparation will be done with special chemical name Steripure 10 of Dimple Chemicals & Services Pvt. Ltd for Algae- fungi removal and then clean it with high pressure water jet, then applying a DuraBond of 2 coats a special type of coat suitable to bond old to new concrete finishing, complete as per specification including materials, machinery, labour, scaffolding , insurance charges transportation with all leads and lifts as directed by the Engineer in charge

Providing and applying DuraClean OD of Dimple Chemicals & Services Pvt. Ltd. is an organic polymer for emulsification & dispersion of oil and grease spilled on any surface (Concrete, metal or water). Apply by brush or spray on the surface to be cleaned, Wait for about 5 – 10 minutes, Wash the surface with high water presure jet. Repeat process for heavy spillage and surfaces soaked in oil till it is de-oiled. Wait for 24 hrs and see whether the penetrated oil comes out to the outer surface, if yes then repeat the step 2-4. complete as per specification including materials, machinery, labour, insurance charges transportation with all leads and lifts as directed by the Engineer in charge

WATER PROOFING OF WATER TANK -- Providing and applying impermeable, UV resistant, self curing, non toxic, high strength, non shrink, polymer based Cementitious waterproofing mortar named as Poly Ironite Ceramic Cementitious (PICC) of Dimple Chemicals & Services Pvt. Ltd. which consists of Nicomix Series + 53 Grade Cement + Water for resurfacing of concrete surfaces of water tank to a thickness upto 5 mm or as per surface conditions and also treatment of lift joints and honey combing areas, potholes etc. is to be done with PICC by removing loose material, dust particles, by breaking using manual and / or mechanical means, removing of existing embedded M.S. bar if any, Cleaning of lift joints, honey combing areas and surface is to be done using special chemical named Steripure 10 of Dimple Chemicals & Services Pvt. Ltd. for Algae- fungi removal followed by compressed water jet. Apply Primer coat name Kelox R 101 + Kelox H 404 a water miscible epoxy of Dimple Chemicals and Services Pvt. Ltd. before PICC application. Kelox is a bonding agent between old to new concrete mortar. Top Coat will be done with NicCoat PC + Kelmer A 60 of Dimple Chemicals & Services Pvt. Ltd., complete as per specification including materials, machinery, labour, insurance charges transportation with all leads and lifts as directed by the Engineer in charge

Impermeable, Anti-wear Coating on Concrete & Bitumen Road :- Providing and applying Bituminous Epoxy coating of Dimple Chemicals & Services Pvt. Ltd. having high abrasion resistant, anti-skid, impermeable, non shrink, high compressive strength, for concrete and Bitumen road coating etc. including cleaning of concrete/ Bitumen road surface by wire brush, water jet, air blower etc. (using other mechanical / manual means) to remove existing loose particles, dirt etc. Then do Bituminous Coating by taking Kelox RB 5050 of Dimple Chemicals & Services Pvt. Ltd. in a clean container & add Kelox RH 4040 of Dimple Chemicals & Services Pvt. Ltd. in it, apply this mixture by wiper on the cleaned surface. Top Coat is done using ready to use product i.e. Nicomix ButaCoat of Dimple Chemicals & Services Pvt. Ltd. , after Bituminous Epoxy Coating Immediately Sprinkle Nicomix ButaCoat on Bituminous Epoxy Coating to provide Impermeable, Antiwear & Antiskid surface. After 10-15 min, use roller on Top Coat i.e. on Nicomix ButaCoat for compaction. After 6 hours, Coated Surface is ready to take the load of traffic movement, complete with all leads and lifts, Material, Machinery, Labour etc. complete as per specification and as directed by engineer-in-charge.

Providing and Applying Bituminous Epoxy coating of Dimple Chemicals & Services Pvt. Ltd. an impermeable, excellent bonding with old surface, non shrink repair coating for Concrete Terrace & ETP Plants includs & steel structure Bituminous Coating by taking Kelox RB 5050 in a clean container & add Kelox RH 4040 in it, stirr well to get homogeneous mixture, apply this mixture by brush type wiper on the cleaned surface i,e dust and loose partical free, no algae fungi, non oily surface, corrosion free etc. Bituminious Epoxy Coating is a two pack system consist of Kelox RB 5050 is a blend of bitumen emulsion with epoxy resin and Kelox H 404 is a modified hardener.It ensures strong adhesion with any substrate like concrete road, bituminous road, metal, wood etc. complete with all leads and lifts, Material, Machinery, Labour etc. complete as per specification and as directed by engineer-in-charge.

Providing & applying high abrasive resistant, impermeable ,high strength, non shrink,self curing Poly Ironite Ceramic Cementatious (PICC) of Dimple Chemical Services and Pvt Ltd,which consists of Nicomix Series + 53 Grade Cement + Water i,e PICC mortar mixing with water misible epoxy i.e Kellox R 101 + Kelox h 404 of Dimple Chemical Services and Pvt Ltd in the ratio of 80:20 ( PICC:Epoxy) and fill the cracks for 10 mm width & 10 mm depth with 1 Rmt length on the concrete surface of road, industrial floor etc, including cleaning of cracks (using manual/mechanical means) , Power tool cleaning, clean with special chemical steripure 10 of Dimple Chemical Services and Pvt Ltd for Alge Fungi removal & DuraClean OD of Dimple Chemical Services and Pvt Ltd for oil removal with high pressure water jet, apply bond coat of water misible epoxy of Kelox before PICC:Epoxy application and finishing, complete as per specification including cost of all materials, machinery, labour, insurance charges transportation with all leads and lifts and any other incidental charges as directed by the Engineer in charge. (As per Data Rate)

Providing and applying DuraClean WR of Dimple Chemicals & Services Pvt. Ltd. an organic polymer for conversion of unwanted substrate (Burr) on metal surface crystal structure modification to remove oxide by washing or mopping. Mesure burr on the surface, spray DuraClean WR on surface to be cleaned, wait for 5-10 min and then wash it off with High pressure water jet. Again mesure burr on the surface, repeat the process till burr is below 25 micron or 10% of the orignal burr. complete as per specification including materials, machinery, labour, insurance charges transportation with all leads and lifts as directed by the Engineer in charge

Providing and applying Clonon of Dimple Chemicals & Services Pvt. Ltd. Clonon is a revolutionary product for broad spectrum odour remover.Clonon Contains a proprietary combination with major ingredilents like Active lodophor solution,Benzalkonium Chloride Glutaraldhyde and Others, Clonon Product main features of Odour Remover,No added Fragrance , Debonds Nano Particles From Surface, Bacteria Killer, Quik Action, Non toxic Chemicals, Ready to Use, No Stain and residue , Does Not contain formaldehyde, Biodegradable Environmental Friendly.Complete as per specification including materials, machinery, labour, insurance charges transportation with all leads and lifts as directed by the Engineer in charge

Providing and laying in situ cement concrete M -30 with tremix treatment for 200 mm thickness for Concrete Road with uniform sprinkling the NicoCil R 90 of Dimple Chemicals & Services Pvt. Ltd using travel for surface hardening , high abrasion resistance and low porosity.Also is including laying plastic sheet for 125 micron thickness with groove cutting of 4 mm wide and 20 mm deep with necessary refilling with polysulphide sealant (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealant reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter ( excluding reinforcement) with coarsen and fine aggregate Using V.S.I.Quality Artificial Sand etc. Complete as per specification including cost of all materials, machinery, labour, insurance charges as directed by the Engineer in charge. (Note- Construction of concrete road as per instruction of Engineer-in-charge or requirement, Rate of construction not included)

Providing and applying Steripure S 30 of Dimple Chemicals & Services Pvt. Ltd. is antibacterial, antifungal water base solution to remove algae-fungi from concrete , masonry , Metal,Stone,Tile , Wood, Paver Block and all Composite material surface. Spray Steripure S 30 (Prepar Dillusion in 1 Part Steripuri S30 : 9 part water)on Surface to be cleaned, wait for 15 - 20 mins then wash the surface with high pressure water jet. This unique product kills the roots of algae-fungi which can be removed from surface by high pressure water jet cleaning. Re-growth of algae-fungi is stopped due to removal of roots. Complete as per specification including materials, machinery, labour, insurance charges transportation with all leads and lifts as directed by the Engineer in charge.

Providing and Laying of rumble strip using Plastirib 2k 2 Component Cold Plastic road marking material in single monolithic application to create rumble strip raised section 15 mm - 20 mm high , 200 to 300 mm wide and spaced about 1 meter centre to centre of roughly 6 numbers at one location, across the entire carriageway. Each rumble marking shall be made complete with drop on Solid Plus reflective glass beads @ 350 gm / sqm spread throughout the surface of marking. The finished surface shall be levelled, uniform , free from straks and holes including surface cleaning and cost of all materials etc. complete. As per IRC 99, these rumble strips shall be applied as traffic calming measure.

Kerb stone / vertical surface painting with Reflective Paint, make Grade 1 (as per IS 164 ) water based acrylic paint,preferably mechnical application for one coat priming coat and 1 uniform Retro reflective finish coat in required colour. Yellow Retroreflecive coat shall be Bright Yellow during night with minimum Rl(dry) > 375 mcd / m2 / lux White Retroreflective Coat shall be Bright White during night with minium Rl(dry) > 450 mcd / m2 / lux .Cleaning of the surface thoroughly by removing flakes,dust deposits, vegetation growth,pasted paper etc., using coir / coil brush,so as to enable the application of respective primer etc.

Providing and applying 2 Component Cold Plastic Night Glow Paint rolled on surfacing material solvent free, high build two pack seamless, tough,skid resistant, material which has property of attaining 600 microns thickness in single coat application white (or as required colour) based on glass and colour retaining acralic cross linking resin system for coloured road surfacing including surface cleaning and cost of all material etc. complete. (All inclusive on bitumen or concrete surface) Night Glow Paint shall preferably be roller applied. After Glow finish surface shall provide minimum of 8 hrs glow after fully absorbing ambient light (visibile light or UV light) for 15 - 30 min. Cleaning of the surface thoroughly by removing flakes, dust deposits, vegetation growth, pasted paper etc., using coir / coil brush, so as to enable the application of respective primer etc.

Augmented Wet Reflective Dot (AWRD) Marking System on AWRD on - Bituminous Surface component cold plastic road marking primer Supply and Application AWRD Road Marking System with minimum of 50% of the intended road marking the surface area to be covered with dots of thickness of 5+ 1 mm, each dot having dia. of 25 + 5 mm using Plastidot 2K 2 Component Cold Plastic Road Marking Material and Solid Plus 100 Drop of Glass Beads with Ri 1.6. Performance parameters shall comply with Rl Dry > 800 mcd/sqm/lux & Rl Wet > 250 mcd/sqm/lux , measured using Zehntner GmbH / Esylux / Delta make Reflectometer In case of concrete / worn out bituminous surfaces application of 2 component cold plastic road marking primer is mandatory.

Augmented Wet Reflective Dot (AWRD) Marking System on AWRD on - Concrete Surface with application of special 2 component cold plastic road marking primer Supply and Application AWRD Road Marking System with minimum of 50% of the intended road marking the surface area to be covered with dots of thickness of 5+ 1 mm, each dot having dia. of 25 + 5 mm using Plastidot 2K 2 Component Cold Plastic Road Marking Material and Solid Plus 100 Drop of Glass Beads with Ri 1.6. Performance parameters shall comply with Rl Dry > 800 mcd/sqm/lux & Rl Wet > 250 mcd/sqm/lux , measured using Zehntner GmbH / Esylux / Delta make Reflectometer In case of concrete / worn out bituminous surfaces application of 2 component cold plastic road marking primer is mandatory.

Supplying and Fixing of High Performance Moulded Shank Raised Pavement Marker / Cat's Eye made of reinforced polycarbonate and weather protected IP > 68 ABS Moulded Body having 2 compartment scratch and abrasion-proof prismatic polycarbonate lens capable of providing a total internal reflection of the light entering the lens face and shall support a load per wheel (per axle) of 20000 Kg and per axle 40000 Kg tested in accordance to ASTM 4280D & EN 1463-1 and EN 1463-2 and MoRTH. The dimensions of the pavement marker being 100 x 100 x 18 mm and weight 140gm, pin 55 mm depth dia 13 mm in star shape for better grip Fixing will be by drilling holes on the road for the shank to go inside, without nails and using cold plastic-based adhesive as per manufacturer's recommendation and complete as directed by the engineer. The contractor and manufacturer shall submit a minimum 1 yr installation warranty and 2 years reflectivity warranty for satisfactory field performance.

Supplying and Fixing of solar road studs (High Performance) polycarbonate body, pavement surface mounted compliant with EN1463 Part 3 having Uni-direction or Bi-directional with solar powered LED illumination and reflective panel having 1) Dimensions 115 x 100 x 8.5 mm 2) Marker shall support a load of 20 Ton tested in accordance to EN 1463 . 3) Waterproof and dust protection IP > 68 4) Weight 117 gram 5) Fixing using 2 coponent cold plastic based adhesive/ butyl tape or as reccomended by manufacturer 6) Working temperature: up to 80 Deg. C 7) The contractor and manufacturer shall submit a technical warraty of 1 yr.

Providing and fixing 8 mm Tinted tuffan Glass with fitting in Aluminium Section of size 100 mm x 763 mm also including Door glass with SS handle of size 1.2m height and 50mm O.D. and 30mm I.D. and SS Door hinges of size 150mm height and 80mm width on one face, Fitting Glass with Silicone tube including Scaffolding and Fitting charges etc. complete & As Directed By Enginner Incharge

Providing concrete resurfacing system of high strength high abrasion resistant Deck CRS base coat and Deck CRS top coat of approved color with antiskid / rough texture and with approved stencil pattern following by Deck SEALER final coat, including providing surface preparation by using grinder machine/hand grinders on serrated / slurried concrete surface to expose original hard concrete surface and washing area thoroughly including removal of nails erc complete. Surface will be open to traffic after 72 hours of application of Deck CRS. Deck CRS consumption 3.8-4 kg/ sqm

Providing concrete resurfacing system of high strength high abrasion resistant Deck CRS base coat and Deck CRS top coat of approved color with antiskid / rough texture without any pattern (Plain) and followed by Deck SEALER final coat, including providing surface preparation by using grinder machine/hand grinders on serrated / slurried concrete surface to expose original hard concrete surface and washing area thoroughly including removal of nails erc complete. Surface will be open to traffic after 72 hours of application of Deck CRS. Deck CRS consumption 3.8-4 kg/ sqm

Providing and fixing 50 mm thick door shutter using 25 Block board 10 mm ply on either side of block board , 4 mm thick veneer on one side with melamine polish and 1 mm thick laminate on other side , SS Hinges ( brass ) 125 mm , Tower Bolt 380 mm , mortise lock , concealed door closer including necessary teak wood bedding , fevical , screw & labour for fixing etc complete as Directed by Engineer in charge

Providing and fixing 50 mm thick main entrance door partly panelled and partly glazed door using 25 mm block board , 10 mm ply Garjan on either side , teak wood beading covered with on side 4 mm thick rich veneer with melamine polish, floor spring , concealed lock , 1.2 m handle pair of 25 mm dia , glass pannels of 0.40 x 0.40 including necessary fevicol , nails screw and labour for fixing etc complete

Providing and fixing high quality inter locking Concrete Cobble Stone finish Pavers in Circular form having area of 1.218 Sqm ( Approximately 71 or 74 Nos. in one Circle ) , made by using rubber moulds of 60 mm thickness, tested and certified by CSIR-CBRI of having strength of 500 kg/sqm. Pavers should have 10 mm face layer in white cement with pigment of Lanxess or TATA make and base mix in M40 grade concrete. The pavers should be made available in various sizes to make a circle of approved finish and design of standard make on a bed of Crushed sand of 25 to 30 mm thick including skirting joints and cleaning as directed by Engineer incharge etc. complete. Prior approval of Superintending Engineer will be necessary .

Providing and fixing Fiber Reinforced Cover to Inspection Chamber with frame of Fibrocast or equivalent make of size 600 mm x 450 mm light duty withstand to carry a load of 5.00 M.T. with 2 years warranty issued from company, also should submit Test Report from manufacturer etc. including all labours, accessories, Leads, Lifts and as directed by Engineer in Charge.

Providing and fixing Fiber Reinforced Cover to Inspection Chamber with frame of Fibrocast or equivalent make of size 600 mm x 450 mm medium duty withstand to carry a load of 12.50 M.T. with 2 years warranty issued from company, also should submit Test Report from manufacturer etc. including all labours, accessories, Leads, Lifts and as directed by Engineer in Charge.

Providing and fixing Fiber Reinforced Cover to Inspection Chamber with frame of Fibrocast or equivalent make of size 600 mm x 450 mm heavy duty withstand to carry a load of 25.00 M.T. with 2 years warranty issued from company, also should submit Test Report from manufacturer etc. including all labours, accessories, Leads, Lifts and as directed by Engineer in Charge.

Providing and fixing Fiber Reinforced Cover to Inspection Chamber with frame of Fibrocast or equivalent make of size 900 x 600 mm light duty withstand to carry a load of 5.00 M.T. with 2 years warranty issued from company, also should submit Test Report from manufacturer etc. including all labours, accessories, Leads, Lifts and as directed by Engineer in Charge.

Providing and fixing Fiber Reinforced Cover to Inspection Chamber with frame of Fibrocast or equivalent make of size 900 x 600 mm medium duty withstand to carry a load of 12.50 M.T. with 2 years warranty issued from company, also should submit Test Report from manufacturer etc. including all labours, accessories, Leads, Lifts and as directed by Engineer in Charge.

Providing and fixing Fiber Reinforced Cover to Inspection Chamber with frame of Fibrocast or equivalent make of size 900 x 600 mm heavy duty withstand to carry a load of 25.00 M.T. with 2 years warranty issued from company, also should submit Test Report from manufacturer etc. including all labours, accessories, Leads, Lifts and as directed by Engineer in Charge.

Providing and fixing glass bricks of size 190 mm x 190 mm x 80 mm fitted inside already prepared SS/MS fabrication using silicon glass sealant before placing of bricks and after placing of bricks to create a bond between fabrication material and glass bricks, finishing the surface by filling the gap between glass bricks with white cement etc. including loading and unloading of the material as directed by engineer in charge.

Supply, providing manufacturing and fixing of interchangeble plates of assigned designation post and Room of office, judges and subordinate of organization of providing 5 mm blue FRP sheet for base surface and 5 mm FRP sheet laser cutting latter of white color with measuring ,marking, cutting, finishing also with fixing of letter on based surface by a solvent by providing latter's name in required language style, type font including interchangeble system for easily changing of plates as per the requirement for pleasent and elegant look with screw and grip as per requirement and direction etc complete.(size-0.65m*0.35).

Supply, providing manufacturing and fixing of interchangeble plates of assigned designation post and Room of office, judges and subordinate of organization of providing 5 mm blue FRP sheet for base surface and 5 mm FRP sheet laser cutting latter of white color with measuring ,marking, cutting, finishing also with fixing of letter on based surface by a solvent by providing latter's name in required language style, type font including interchangeble system for easily changing of plates as per the requirement for pleasent and elegant look with screw and grip as per requirement and direction etc complete.(size-0.25m*0.35).

Providing & fixing Ester Resin material 5th km Structure As per IRC-08-1980 with chopped strand mat 350 micron GSM with H2o2, cobolt octate (3%), With Pigment & all required allied accessories front & back side bonded with TYPE IV retro reflective sheeting & lettering etc complete. The contractor has to provide Outerdoor Test Certificate of TYPE IV Reflective Sheeting from the Retro reflective Manufacture. For Fixing Structure excavation of 0.75 x 0.75 x 0.45 Mtr. & filling the soil inside the bags & that bags filled in the structure as directed Engineer in-charge etc complete

Providing & fixing Ester Resin material 1st km Structure As per IRC-08-1980 with chopped strand mat 350 micron GSM with H2o2, cobolt octate (3%), With Pigment & all required allied accessories front & back side bonded with TYPE IV retro reflective sheeting & lettering etc complete. The contractor has to provide Outerdoor Test Certificate of TYPE IV Reflective Sheeting from the Retro reflective Manufacture. For Fixing Structure excavation of 0.75 x 0.75 x 0.45 Mtr. & filling the soil inside the bags & that bags filled in the structure as directed Engineer in-charge etc complete

Providing & fixing Ester Resin material 200 MTR Structure As per IRC-26-1967 with chopped strand mat 350 micron GSM with H2o2, cobolt octate (3%), With Pigment & all required allied accessories For Fixing Structure excavation of 0.60 x 0.60 x 0.45 Mtr. & filling the soil inside the bags & that bags filled in the structure as directed Engineer in-charge etc complete

Milling of bituminous pavement upto depth of 50 mm by cold milling machine including all levelling and slope sensors, self-loading of milled material by discharge conveyor onto transport vehicle including lead charges of 10 km as directed by Engineer in Charge

Milling of bituminous pavement upto depth of 100 mm by cold milling machine including all levelling and slope sensors, self-loading of milled material by discharge conveyor onto transport vehicle including lead 10 km as directed by Engineer in Charge

Dismantling of rigid concrete pavement upto depth of 50 mm using Cold Milling machine including all levelling and slope sensors, self-loading of milled material by discharge conveyor onto transport vehicle including lead 10 km as directed by Engineer in Charge

Re-texturing of rigid concrete pavement upto depth of 20 mm using Cold Milling machine with Fine Milling drum of width 1.5m or above including all levelling and slope sensors, self-loading of milled material by discharge conveyor onto transport vehicle including lead 10 km as directed by Engineer in Charge

Providing and fixing stainless steel(Grade 304) made of Hollow tubes, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainlesssteel nuts and bolts complete, i/c fixing the railling with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge,( for payment purpose only weight of stainless steel members shall be considered excluding fixingh accessories such as nuts,bolts, fasteners etc.).

Providing concrete surfacing system with Deck CRS with base coat, application of pattern in stencil followed by top coat and sealer including surface preparation etc. Deck CRS consumption about 4 kg/ sqm as per manufacturers specifications

Providing concrete surfacing system with Deck CRS with base coat followed by top coat and sealer including surface preparation etc. Deck CRS consumption about 4 kg/ sqm as per manufacturers specifications

Providing and fixing High Density Polypropylene Under Ground Water Tank of Required size with 5 years warranty issued from company, also should submit Test Report from manufacturer etc. including all labours, accessories, Leads, Lifts and as directed by Engineer in Charge(From 1000 to 3000 Litre)

Providing and fixing High Density Polypropylene Under Ground Water Tank of Required size with 5 years warranty issued from company, also should submit Test Report from manufacturer etc. including all labours, accessories, Leads, Lifts and as directed by Engineer in Charge(From 1000 to 3000 Litre)

Providing and fixing Chevron sign boards in rectangular size of 500x600 mm made out of ___mm aluminium sheet bonded with white retro reflective sheeting of Class B (Type IV High Intensity micro-prismatic grade sheeting -HIP) having pressure sensitive / heat activated adhesive retro reflective specified background, border and back side retro reflective symbols, letters, numerals, arrow as per IRC 67-2012 supported with back support frame 25mmx25mmx3mm, duly painted on back side with grey stove enamel paint and supported on one no. of M.S. Angle iron post of 65mmx65mmx6mm, 3.45 mtr long, dully painted with flat oil paint having alternate black and white bands of 25cm width including G.I.fixtures etc. fixing the boards in M25 grade concrete block of size 60cm x 60cm x 75cm including transportation etc. complete. Class-B (Type IV High Intensity micro prismatic grade sheeting -HIP) shall have 7 years writen warranty from the manufacturer of the retro reflective sheeting and authorised distributor / converter issued for fiedl performance including the screen printed area and cut-out sheeting and cut-out from the durable transparent overlay film and this warranty certificate in original & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor to Engineer incharge. 500x600mm made out of 3mm aluminium composite material with 0.25mm skin thickness on either side

Providing and fixing One way Hazard Marker sign boards in rectangular size of 300x900 mm made out of 4mm aluminium sheet bonded with white retro reflective sheeting of Class B (Type IV High Intensity micro-prismatic grade sheeting -HIP) having pressure sensitive / heat activated adhesive retro reflective specified background, border and back side retro reflective symbols, letters, numerals, arrow as per IRC 67-2012 supported with back support frame 25mmx25mmx3mm, duly painted on back side with grey stove enamel paint and supported on one no. of M.S. Angle iron post of 65mmx65mmx6mm, 1.8 mtr long, dully painted with flat oil paint having alternate black and white bands of 25cm width including G.I.fixtures etc. fixing the boards in M25 grade concrete block of size 60cm x 60cm x 75cm including transportation etc. complete. Class-B (Type IV High Intensity micro prismatic grade sheeting -HIP) shall have 7 years writen warranty from the manufacturer of the retro reflective sheeting and authorised distributor / converter issued for fiedl performance including the screen printed area and cut-out sheeting and cut-out from the durable transparent overlay film and this warranty certificate in original & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor to Engineer incharge. 300x900mm made out of 4mm aluminium composite material with 0.5mm skin thickness on either side

Providing and fixing Two Way Hazard Marker sign boards in rectangular size of 450x900 mm made out of 4mm aluminium sheet bonded with white retro reflective sheeting of Class B (Type IV High Intensity micro-prismatic grade sheeting -HIP) having pressure sensitive / heat activated adhesive retro reflective specified background, border and back side retro reflective symbols, letters, numerals, arrow as per IRC 67-2012 supported with back support frame 25mmx25mmx3mm, duly painted on back side with grey stove enamel paint and supported on one no. of M.S. Angle iron post of 65mmx65mmx6mm, 1.8 mtr long, dully painted with flat oil paint having alternate black and white bands of 25cm width including G.I.fixtures etc. fixing the boards in M25 grade concrete block of size 60cm x 60cm x 75cm including transportation etc. complete. Class-B (Type IV High Intensity micro prismatic grade sheeting -HIP) shall have 7 years writen warranty from the manufacturer of the retro reflective sheeting and authorised distributor / converter issued for fiedl performance including the screen printed area and cut-out sheeting and cut-out from the durable transparent overlay film and this warranty certificate in original & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor to Engineer incharge. 450x900mm made out of 4mm aluminium composite material with 0.5mm skin thickness on either side

Providing and fixing 8 mm Tinted tuffan Glass with fitting in Aluminium Section of size 100 mm x 763 mm also including Door glass with SS handle of size 1.2m height and 50mm O.D. and 30mm I.D. and SS Door hinges of size 150mm height and 80mm width on one face, Fitting Glass with Silicone tube including Scaffolding and Fitting charges etc. complete & As Directed By Enginner Incharge

Encasement of columns and beams by placing 75 to 100 mm thick free flow high strength micro concrete with leak proof shuttering with all equipments, manpower etc complete

Providing and Applying Epoxy Mortar EPIBOND 11 in areas of fixing cracks, Charges for repairing of full depth crack (30mm Depth x 50mm Width/PER RMT) on PQC pavement using cross stitching method as per specification of IRC SP : 83-2008. Making chase along crack and cleaning the holes/chase with oil free compressed air, fixing of reinforcement in holes filled with epoxy resin in enough quantity for the bar to be completely coated when inserted in the hole, chase filling with epoxy EPIBOND 11 (1:1:8) resin+hardner+fine sand as per manufacture specification, curing, transportation, required machinery, tool and tackles etc. Complete as per direction of EIC.

Providing and applying volatile corrosion inhibiting wax Powrthrow HT Wax on HT LRPC Strands before embedment in tendons, LRPC Strands of 12.7mm & 15.2mm ,tendon duct need to be lime washed prior to insertion of LRPC Strands coated with wax. The wax must be hand applied using gloves from the pail prior to insertion on strand in duct. Powrthrow HT Wax is bipolar in nature should protect the strand from corrosion. As per JIS Z 1535M method should have excellent resistance to corrosion spots. And the wax should show a potential change of minimum 120mv as per Corrosion Potential Test.

KATALINE INFRAPRODUCTS PVT LTD