Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.9 LAccepted-AOC 578 AVAS VIKAS JANAKPURI B IZATNAGAR BAREILLY 243122 UP | BAREILLY | UTTAR PRADESH | 243122 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹29.3 L+₹88,286 (3.10%)Rejected-Finance A 1 BLOCK 2 HATHITHAN HATHITHAN VILLAGE TOWN JALALNAGAR CITY SHAHJAHANPUR SHAHJAHANPUR UTTAR PRADESH 242001 INDIA | SHAHJAHANPUR | UTTAR PRADESH | 242001 | L2 | Rejected-Finance Being higher Bid | |
| 3 | L3₹35.6 L+₹7.1 L (25.1%)Rejected-Finance 160 PREM NAGAR BAREILLY | L3 | Rejected-Finance Being higher Bid | |
| 4 | L4₹36.0 L+₹7.6 L (26.7%)Rejected-Finance 65 MATA KA MANDIR RAM NAGAR COLONY SHAHJAHANPUR 242001 UP | SHAHJAHANPUR | SHAHJAHANPUR | UP | 242001 | L4 | Rejected-Finance Being higher Bid | |
| 5 | L5₹36.8 L+₹8.3 L (29.3%)Rejected-Finance TARIN JALAL NAGAR SHAHJAHANPUR 242001 UP | SHAHJAHANPUR | SHAHJAHANPUR | UP | 242001 | L5 | Rejected-Finance Being higher Bid |
Tender Value
₹49.2 L
EMD Value
₹98,320
Closing Date
21 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Office BAREILLY
HQ, CWE, MES, Station Road, Bareilly
CA NO.CWE BLY/GE (E) /48 OF 2023- 2024 SPECIAL REPAIRS OF OTM ACCN BLDG NO. T-154 AT SHAHJAHANPUR CANTT UNDER GE (EAST) BAREILLY
2023_MES_629419_1
8200/B/770/E8
Open Tender
Civil Works
Item Rate
180 days
Shahjahanpur
As per NIT
6 documents required · 6 mandatory
₹500
GE East Bareilly
₹98,320
Yes
29 Jan 2024
23 Nov 2023
23 Dec 2023
23 Nov 2023
21 Dec 2023
8 Dec 2023
Amount
Taking down chowkhats or frames n.exc 1.5 Sqm each (without taking off shutters from frames) complete all as specified and as directed.
Taking down of chowkhats or frame exc 1.5 Sqm but n.exc 4.5 Sqm (without taking off shutters from the frames) complete all as specified and as directed.
S&F 35mm thick 1st class softwood (Shisham) in plain, framed, panelled shutters (any numver of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and as directed.
S & F framed work as in chowkats or frame of door or gates of angle or other section with gusset plate, rail braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and inclu either hooks and hinges or steel hanging door fiting complete all as specified and as directed.
S&F 0.63 mm thick mild steel plain black sheet in hearths, covering to door chowkhats (frames) chullah hoods, water tanks, water troughs, ducts,urinal trough and funnels etc, cut to size,edge beaded if directed, holes punched , including round headed screw, clout nails or rivets and fixed to wood or steel members, etc, with plain 40 mm lap joints or welded / riveted seams including bending, turning up, mitred angle, stopped ends, outlet, etc, complete all as specified and as directed.
S&F steel window with pressed steel frame of size 95mmx45mm(thickness of PBI sheet 1.25mm) side hung shutter including box type hinges with steel handle and steel peg stay complete with glazed openable shutter with glazing bar (open out side) and wire gaugeed openable shutter without glazing bar (open inside), devetailed or welded complete all as specified and directed and as per Drg no TD/088 Dated 07 Jan 2002.. (i) Two shutter i.e. wire gauged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit. (ii) rate for filling of PCC,1:3;6 type C0 frame deemed to be included in quoted rate. (iii) MS grill,wire gauge and glass shall be measured and paid seperately.
S&F steel ventilator with top hung shutter including incl hinges steel peg stay complete all as specified and directed
M&L framed work such as grills grating etc with end of bars shoulderd and/or riveted welded or forged into spikes.framed guard bars iron doors.ladders framed balusters, walk ways. Railings, frame work of water tanks and similar work conforming to Fe 290.Gde-E-165 complete all as specified and directed.
S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and as directed.
S& F galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and as directed.
S&F for 100mm long butt hinges ISI marked, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.
S&F mild steel spring for doors 300mm long, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
S&F 300mm long mild steel sliding door bolts, bolt or clip type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.
M&L for 150mm long mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed.
S&F solid PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.
S&F, 200 mm long aluminium anodised barrel barrel tower bolts of extruded section and fixed complete all as specified and as directed.
S&F 100 mm long butt hinges, extruded alminium alloy with galavanised mild steel hinge pin, anodised and fixed , type B-21 complete all as specified and as directed.
S&F 125 mm aluminium handles cast type, anodised complete all as specified and as directed.
M&L applying two coats of synthetic enamel paints on new steel surfaces over a coat of red oxide primer including surface preparation of any description over 10 cm width or girth complete all as specified and as directed.
M&L preparing wood or wood based surfaces of any description over 10 cm width or girth and applying Two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing , steps, cills, sunshade , shelves,lintels, etc and cutting chases for concealed conduit wiring , etc and making good, cutting not exc 20 cm girth complete all as specified and as directed.
S&F 140 mm floor door stopper of aluminium alloy body and tongue , anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.
S&F curtain rod 25mm dia , mild steel, chormium plated with fixing bracket, stops,rollers etc for hangging curtain rod complete all as specified and as directed.
Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises etc complete all as specified and as directed.
M & L Glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white cement or colour cement over and including 10 mm thick in CM 1:4 complete all as specified and as directed.
M&L providing non- skid glazed ceramic tiles coloured7-8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but n xc 0.11 sqm as in floor etc set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles over and including 15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed.
M&L for vitrified ceramic tiles light shade 10 mm thick (square/rectanglar) polished area of each tiles n exceeding 0.36 sqm as in floor etc set and jointed in neat cement slurry over and over and including 15 mm thick screed bed of cement mortar in 1:6 and pointed in white or coloured cement to match coloured tiles complete all as specified and as directed.
M&L providing vitrified ceramic tiles light shade 10 mm thick (square/rectanglar) polished area of each tiles n exceeding 0.36 sqm in dado/skirting etc set and jointed in neat cement slurry over and including 10 mm thick cement mortar rendering in 1:4 and pointed in white or coloured cement to match coloured tiles complete all as specified and as directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and complete all as specified and as directed.
M&L brushing neat cement slurry with 3.0Kg of cement per sqm and complete all as specified and as directed.
M&L for machine cut mirror polish kota stone slab flooring 20-25mm thich over and including 20mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigmen to match the shad of the slab including rubbing and polishing complete all as specified and directed.
M&L for machine cut mirror polish kota stone slab 20-25mm thick with rounded edges as in risers of steps, skirting, dado etc including rubbing and polishing complete all as specified and directed.
M&L for 20mm thick granite stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.
M&L rendering 12mm thick in cement plaster 1:6 on surfaces other than fair faces of brick work and surface finished even and smooth without using extra cement including taking down complete all as specified and directed.
M&L rendering 15mm thick in cement plaster 1:4 on surfaces fair faces of brick work and surface finished even and fair without using extra cement including taking down complete all as specified and directed.
M&L rendering 15 mm thick in cement plaster 1:4 on concrete surfaces as in ceilling including taking down complete all as specified and directed.
M&L three coat of white wash on walls including preparation of new plastered surface and complete all as specified and directed.
M&L for preparation of old surface and applying one coat of white wash on walls complete all as specified and directed
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.
M&L for preparation of Old plastered surfaces of walls and applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.
M&L for preparing newly plastered surfaces of walls and applying two coat of cement base paint over a coat of primer complete all as specfied and directed.
M&L for preparing old plastered surfaces of walls and applying two coat of cement base paint complete all as specfied and directed.
M&L for preparing newly plastered surfaces of ceiling and applying three coat of white wash complete all as specfied and directed.
M&L preparing Old plastered or unplastered surfaces of ceiling and applying two coats of white wash on old decorated surface complete all as specfied and direcetd.
Demolition of cement concrete (un reinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
M&L for providing 75 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub floor, sub base of floor/hard standing/foot path and finishing the surface even and fair complete all as specified and directed
M&L for machine pressed precast concrete inter locking paver block ISI marked any shape and size confirming to IS-15658-2006 of 80mm thickness M-40 Grade, glossy finished of approved colour laid over and including 50 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified and directed.
M&L 75 mm thick PCC 1:3:6, type C-2 (using 40 mm graded stone agg) as in plinth protection /Path finishing cement concrete even and smooth without using extra cement all as specified and directed.
M&L 40mm thick PCC 1:2:4 type B1 (using 20mm graded stone agg) laid as in panel finished even & smooth with using extra cement as in flooring complete all as specified and as directed.
Supply only glass dividing strip 3mm thick and 38mm wide in flooring complete all as specified and directed.
Demolition of cement concrete (unreinforced) in roofs, floors (other than ground floors) beams, staircases, landing, chajjas and similar suspended work all as specified and directed.
M&L plain PCC 1:2:4 type B1 using 20 mm graded aggregate as in roof for maint the uniform slope etc any thickness all as specified and directed.
M&L for preparation of roof surface applying a coat of hot bituminous primer @ 0.30 kg/sqm and applying a coat of industrial bitumen 85/25 @ 1.20 kg/sqm over primer and laying modified polymeric water proofing membrane mineral type top (weight not less than 4 kg/sqm, 3mm thick consisting 100 mm micron HMHDE FILM ) over and including 10 mm thick rendering in CM 1:4 including integral waterproofing compound 3% as per manufacturer instruction and complete all as specified and directed
Demolition of cement concrete (un reinforced) of any description and in any position not other specifically provided for all as specified and direcetd.
M&L for preparation of sunken floor and applying a coat of hot bituminous primer @ .30 kg/sqm and applying a coat of industrial bitumen 85/25 @ 1.20 kg/sqm over primer and laying modified polymeric water proofing membrane(weight not less than 4 kg/sqm 3 mm thick consisting 100 mm micron HMHDE FILM ) and applying one coat of industrial btumen grade 85/25 @ 1.2 kg/sqm on top of membrane with 100 mm overlap at side end lap where required over and including 10 mm thick rendering in CM 1:4 including integral waterproofing compound 3% and taking down existing plastering as per manufacturer instruction and complete all as specified and directed
M&L for cement concrete (1:5:10) type E-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete all as specified and directed.
M&L PCC 25mm thick 1:2:4 of type B0( using 12.5mm graded stone aggregate) as in base of floors to receive the top layer of floor complete all as specified and directed.
S& in replacement vitreous china squatting pan "Orissa" pattern size 580mmx 440mm white with integral foot rests excluding flushing cictern and flush pipe all as specified and directed.
S&F in replacement vitreous china wash down water closet pan (pedestal pattern) white(excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed.
S&F in replacement plastic water closet seat cover black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device all as specified and directed.
S & F in replacement 10 ltrs capasity PVC valveless syphonic action type flushing cistern low level white, with inlet ball valve, float and handle including bracket and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and as directed.
S&F in replacement vitreous china wash basin white, oval type size 550 mm excluding tap waste but including brackets and including cutting for and pinioning in ends of brackets but exclusive of supply waste pipe or as on RCC shelves top all as specified and directed
S&F in replacement only 32mm dia waste fittings brass chromium plated for basin with long screwed shank and fly nuts, flange end bedded in red lead cement and other end fixed.complete all as specified and directed.
S&F in replacement 15mm bore pillar tap cast copper allloy with capstan head Chromium plated scwed down with or without letter Hot or Cold with long shank and fly nuts scrwed for iron pipe and fixed as specified and directed.
S&F in replacement bib taps 15mm bore chromium plated with crutch or butter fly handle screwed down for iron pipe or brass ferrule and fixed complete all as specified and direcetd.
S&F in replacement 15mm bore stop valve cast copper alloy chromium plated fancy type with long shank and cup ( concealed type)high prssure screwed for iron pipe and fixed all as specified.
S&F in replacement angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down, screwed both end for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed.
S&F in replacement Vitreous China Urinal, Half Stall type(back or corner wall type) complete including providing and fixing plugs,bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement fixing automatic flushing cistern with brakctes flush pipe grating and union for discharge pipe
S&F 450mmx 600mm bevelled edges mirror consisting of 5.5mm thick commercial plywood and fixed to plug with chromium plated brass screwed and cup washer all as specified and direceted.
S&F PVC connection 15mm bore length not less than 300 mm long with both ends PTMT nuts complete all as specified and as directed.
S&F 75 mm dia PVC (SWR) floor trap plain with greting incl jointing with solvent cement complete all as specified and as directed.
S&F in replacement swivel shower rose dia 120 mm of brass Chromium plated for fixing with 15mm pipe fixed complete all as specified and as directed.
S&F rotational moulded polethylene water tank three layered of 1000 ltrs capacity ( cylindrical vertical with closed top) hoisted and fixed in position triple layer in white colour all as pacific SSR Part-I including taking down old existion tank complete all as specified and directed.
S&F 20 mm bore gun metal ,globe or gate valves, with iron wheel head , screwed both ends for iron pipe complete all as specified and as directed.
S&F 20 mm bore Ball valves ,high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule complete all as specified and as directed.
Taking up or down existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed for 15mm bore complete all as specified and as directed.
Taking up or down existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed for 20mm bore complete all as specified and as directed.
S&F 15mm bore GI water tubing medium grade galvanised with and inlcluding all fittings and fixed complete to walls and ceilling or laid in floor complete all as specified and as directed.
S&F 20mm bore GI water tubing medium grade galvanised with and inlcluding all fittings and fixed complete to walls and ceilling or laid in floor complete all as specified and as directed.
Refixing 15mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc)complete all as specified and as directed.
Refixing 20mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc) complete all as specified and as directed.
Taking up or down existing asbestos cement pressure pipe any class, (including all fitting) including disconnecting pipes and fittings complete all as specified and as directed.
S&F in replacement 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.
S&F in replacement 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed.
S&F 75 mm bore. PVC (SWR) bends complete all as specified and as directed.
S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches complete all as specified and as directed.
S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall all as specified and directed.
S&F 110 mm PVC (SWR) bend any radius all as specified and directed.
S&F 110mm bore.PVC(SWR) junction single (single T) equal or unequal with access door complete all as specified and as directed.
S&F Stack clamps out of flat iron of size 50mmx5mm for fixing of including nut, bolts and securing ends of stays to wall or roof for 75 mm pipe complete all as specified and as directed.
S&F Stack clamps out of flat iron of size 50mmx5mm for fixing of including nut, bolts and securing ends of stays to wall or roof for 100 mm pipe complete all as specified and as directed.
Demolition of brick work in cement mortar incl all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles etc complete all as specified and directed.
M&L Brick work with fly ash bricks (old size) as per IS 12894 -2002 straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified and directed.
S&F in replacement aluminium hat pegs,solid body,125mm to 175mm complete all as specified and directed
M&L Brick work with fly ash bricks (old size) as per IS 12894 -2002 straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 as in half brick thick wall complete all as specified and directed.
Material and labour for Chipping of unsound/weak concrete materials of from Column/beams with standard power driven percussion type or pneumatic chiesel of standard make including tapering all edges, making square shoulders of cavities etc upto any height including necessary scaffolding and safety measures complete all as specified and as directed( Note- Surface area of column and beam shall be measured).
Material and labour for Chipping of unsound/weak concrete materials of from slabs/chajja with standard power driven percussion type or pneumatic chiesel of standard make including tapering all edges, making square shoulders of cavities etc upto any height including necessary scaffolding and safety measures complete all as specified and as directed by the Engr-in-Charge..
Material and labour for removing concrete all around reinforcement including behind of bars to give an average clearence of 25mm (but not less than 15mm clear air gap) by manual methods (hammering the rebar using wire brushes, chieselling etc.) length of reinforcement bars cleared of concrete shall be measured for payment including upto any height necessary scaffolding and safety measures complete all as specified and as directed.
Material and labour for Cleaning of exposed concrete surface of lightly sticking materials including foreign materials, loose concrete/ aggregate etc and disposal of all debris upto distance of 50 Mtr complete all as specified and as directed.
Materials and labour for applying single coat of epoxy bond adhesive on prepared non metallic surface (existing surface) by using brush as per manufacturers instruction / specification upto any height including necessary scaffolding and safety measures complete all as specified and as directed.
Exposing the corroded reinforcement upto and including 16mm dia of bar completely along its full cirCumference, cleaned to remove all loose scale and corrosion deposit, applying rust removing chemical followed by removing the rust by emery paper and cleaning the area thoroughly by water and allow it to dry as per manufacture's instruction upto any height including necessary scaffolding and safety measures complete all as specified and as directed.
Supply and application of Epoxy Zinc rich primer on the prepared Reinforced surface by brush, the primer shall have a minimum specific gravity 1.75, minimum wet film thickness/coat 100 microns & dry film thickness/coat 40 microns. Minimum adhesive bond strength with steel is 1.5 N/mm2 upto any height including necessary scaffolding and safety measures complete all as specified and as directed.
Supply and application free flow non-shrink cementitious micro concerete to the affected beam, column etc. above 45 mm but upto 60mm thickness (average) where major spalling has taken place even the core of concrete affected. The Micro concrete shall have a minimum 1 day compressive strength of 10 MPa and 28 days strength of 50 MPa, Minimum tensile strenght 2 N/mm2 @ 28 days, minimum Flexural strength 5 N/mm2@ 28 days tested as per BS 4551-80, Expansion characterstics Unrestrained expansion as per ASTM C827-1987 1 to 4%. including necessary formwork, upto any height including necessary scaffolding and safety measures complete all as specified and as directed.
Supply and application Two component structural grade polymer modified reinstatement mortar where local spalling has taken place or shuttering is not possible. The Mortar can be applied from a minimum of 5mm to 15mm thickness in smaller vertical pockets and upto 100 mm thickness in horizontal applications. The Mortar should have a minimum compressive strength 12 N/mm2 in 1 day and 4 5N/mm2 in 28 days. Minimum Flexural strength should be 8 N/mm2 in 28 days. A modified styrene butadience emulsion for use as a bonding aid and gauging liquid for cementitous systems to be mixed with cement slurry before the application of microconcrete to be used @ 6 lit/bag of cement. The bonding agent should have minimum compressive strength 24 N/mm2 Minimum Tensile strength 3.5 N/mm2, Minimum Flexural Strength 6.5 N/mm2 including necessary scaffolding and safety measures complete all as specified and as directed.
Materiall and labour applying concure LP 90 or equivalent over concrete and cement plaster as curing compund as per manufactures instructions including necessary scaffolding and safety measures complete all as specified and as directed.
Materials and labour for introducing new reinforcement bars for structural connections in RCC beam, lintels, columns and slabs etc including power drilling holes of appropriate diameters in reinforced or plain cement concrete to a minimum depth of 150mm upto 200mm including power drilling, fixing the reinforcement in position using epoxy after dusting of loose dust by blowing air, sealing the same with epoxy cartridges etc as per manufacturer instruction for upto 12mm dia of bar complete all as specified and as directed by the Engr-in-Charge.
Taking down carefully aluminium point wiring any type including battens if any except for ceiling or where not feasible for light/ fan//bell/socket or power and including unscrewing from board, fitting and fixture such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified and directed.
Taking down carefully UNSV main switch DBs of any description of an size in any position complete all as specified and directed.
Taking down carefully by sub main wiring of any size complete all specified and as directed.
Material and labour for point wiring with single core FRLSH 1100 volt grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, with all conduit accessories, screws (concealed conduit wiring in walls and casing capping on ceiling or roof) including metal box suitable for modular fittings and covered with modular plate and cover of suitable size with new brass screws for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for:- (a) One light / fan/ exhaust fan point controlled by one switch complete all as specified and directed.
(b) One 3 pin 5 Amp switch socket out let point on an independent board complete all as specified and directed.
(c) One 3 pin 5 Amp socket out let point controlled by one switch on same board complete all as specified and directed.
All as per above item No.114 here in before but for one 15 Amp 6 Pin switch socket out let independent with 2.5 Sqmm FRLSH (Nominal Area) PVC unsheathed copper conductor single core multistranded incl 2.5 sq mm FRLSH PVC copper conductor single core used as earth continuity conductoe complete all as specified and directed.
M&L for sub main wiring with two single core 6.0 Sqmm (FRLSH) copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including 6.0 Sqmm (FRLSH) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified. ( Note :- Two runs of 6.0 sqmm (FRLSH) and one run of 6.0 sqmm (FRLSH) copper conductor shall be measured as one unit length.) complete all as specified and directed.
S & F Switch piano flush type polycarbonate SP one way 6 Amps complete all as per specified and directed.
S & F Switch piano flush type polycarbonate SP one way 16 Amps complete all as per specified and directed.
S&F Socket out let 3 Pin 6 Amp multipurpose flash type complete all as specified and directed.
S & F Socket out let 3 Pin 6/16 Amp multipurpose flash type complete all as specified and directed.
Supply and Fixing ceiling rose PVC / Poly carbonate, Isolated body, three terminal AC 230 volts complete all as specified and directed.
M & L for replacement of lamp holder, PVC / Poly carbonate, insulated body modular type with back plate batten/angle type for batten fittings complete all as specified and & directed
M&L for in replacement of Step regulator electronic fan regulator flush type on the existing phenolic laminated sheet etc as required complete all as specifed and directed.
S&F for in replacement MCB SP 6-32 Amps breaking capacity 10 KA 'B' Series 240 Volt 50Hz complete all as specified and directed.
S&F for in replacement MCB SPN 32 Amps breaking capacity 10 KA 'C' Series 240 Volt 50Hz complete all as specified and directed.
S&F in replacement MCB DB Single pole and neutral 8 way sheet steel phopetised powder painted with 200 amps reated bus bar with IP 43 protection 240V neutral link, earth bar and Din rail double door complete all as specified and directed.
S&F in replacement LED lights fittings 1X20 W 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with suitable size complete all as specified and directed.
Taking down and refixing the same of Decorative box type LED light fitting suitable for 4ft T8-20 watt complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.
S&F in replacement LED street light fitting 35 Watt 230V AC outdoor type with high pressure siecast aluminum hosing and heat resistant complete with driver lamp bracket with impactand corrosion resistant including thermamnagement in multiple optics complete with IP 65/66 protection complete all as specified and directed.
Material & Labour for earthing complete including taking out old unsv and replace with galvanised steel earth plate 600x600x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate using 4 mm dia GI wire as earth wire electrode moulded and rivetted to earth plate at one end and connected to main switch/ control switches of buildings at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto main switch board of building including 20 dia bore GI pipe 'light grade' as water pipe from earth chamber and including excavation and earth work, PCC 1:3:6 type C1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced complete shown as electrical plate No. 3 of SSR Part-I, all as specified and directed.
S&F sheet metal enclosure vertical TPN DB, 4 way, 415 V with double door protection detachable gland plates, flush mounting insulated bus bar arrangement IP 43, earth bar and neutral links complete including taking down old unsvcomplete all as specified and as directed.
Taking down Ceilling/Exhaust fan in any description and refixing the same after repair of building including necessary connections complete all as specified and as directed.
M& L Painting of ceiling fans complete in situ with snthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all specified and directed.
M&L for rewinding of burnt fan motor with super enameled copper wire of suitable size 1200/1400mm sweep ceiling fan of any make, type model including transporation complte all as specified and directed.
Supply and laying PVC insulated armoured, heavy duty electric cable with aluminium conductor 1100V grade, cross sectional area 25 sqmm 4 core comple all as specified and as directed.
S&F in replacement MCCB TPN 63 Amps, 16 KA, 'C' series complete all as specified and as directed.
Excavating in trenches, n exc 1.5m wide and n exc 1.5m depth for foundation etc or for shafts wells, cesspits, manholes, pier holes etc not exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all specified and directed.
Returning filling including spreading leveling watering and well ramming in layers not exc 25cm in soft/loose soil complete all as specified and directed.
Removing excavated Soil materail n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.
Material and Labour for river fine sand, washed and screended dry for cushioning to underground cable in trenches below and around underground cable including spreading and leveling punning complete all as specified and directed.
M&L for layjng fly ask bricks for protecton of cable in trenches laid in dry flat across the cable with length of whole bricks complete all as specified and as directed.
M/S WASEEM KHAN CONTRACTOR
Builders Harpal
M/S CHAUHAN ELECTRIC WORKS
M/S SHAHABUDDIN AND SONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .