REPAIRS CLEANING OF SEWAGE LINES MANHOLES SEPTIC TANKS PATHWAY DRAIN AND CERTAIN MISC BR WORKS AT TRG BN I CIW SPORTS COMPANY AND HRDC IN BEG AND CENTRE OF AGE BR II UNDER GE CENTRAL KIRKEE.

Amount

Demolition and breaking up drain pipes (salt glazed ware / AC / RCC) drain pipes set in cement mortar, dia of pipe 100mm all as specified and as directed.

All as per Sl Item No. 1 here-in-before but dia of pipe 150mm.

All as per Sl Item No. 1 here-in-before but dia of pipe 200mm.

Cleaning of existing septic tank of 500 users capacity by using mechanical pumping machine to remove water, sludge, stones, solid particles etc complete from the septic tank at any location and at any distance from road and removing the same from the campus and buried complete all as specified and as directed as below:- (i) The sludge / burried soil etc taken out shall be stacked alongwith the septic tank, sump well etc., after 48 hours of the sludge taken out, measurement shall be taken as of the solid contents for the purpose of payment. The tenderer are advised to keep this aspect in mind while quotating the rates. After taking the measurements, the solid contents shall be disposed off outside the MD land/area. (ii) Necessary precautions as well as safety measures shall be taken by the contractor without any extra cost, for working in the foul conditions.

Contd,, from 4 (iii) The contractor shall be entirely responsible for the lapse, mishappening to any of the manpower deployed and/or to other equipment / machinary / material at the site of work during the execution. (iv) For cleaning the sewere line/manholes also refer relevant clauses of particular specifications here-in-after.

All as specified in Sl Item No. 4 above but septic tank for 1000 users.

All as specified in Sl Item No. 4 above but filter bed for 500 users.

All as specified in Sl Item No. 4 above but septic tank for 100 users.

Excavating in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth; for foundation etc or for manholes, laying pipes etc and getting out in hard / dense soil all as specified and as directed.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for complete below or above GL all as specified and as directed.

Demolition of precast concrete block walling built in cement mortar as in manhole including PCC coping all as specified and as directed.

Demolition of reinforced cement concrete manhole covers n. exc. 15cm thickness below or above ground level all as specified and as directed.

Material and labour for for plain cement concrete (1:4:8), type D-2 using 40 mm graded coarse stone aggregate as in bed to drain pipes of 100 mm bore including forming cradles complete all as specified and as directed.

All as per Sl Item No 13 here-in-before but for drain pipes of 150 mm bore.

All as per Sl Item No 13 here-in-before but for drain pipes of 200 mm bore.

Material and labour for plain cement concrete (1:4:8) type D2 using 40 mm graded coarse stone aggregate as in foundations filling and mass concrete all as specified and as directed.

Material and labour for Reinforced cement concrete pipes, 100 mm bore, Class NP-2, laid in trenches and jointed complete with collars all as specified and as directed.

Material and labour for Reinforced cement concrete pipes, 150 mm bore, Class NP-2, laid in trenches and jointed complete with collars all as specified and as directed.

Material and labour for Reinforced cement concrete pipes, 200 mm bore, Class NP-2, laid in trenches and jointed complete with collars all as specified and as directed.

Material and labour for precast cement concrete block masonry exceeding 10cm in width built in cement mortar (1:6) of Gde C-5 complete all as specified and as directed.

All as per Sl Item No 20 above except blocks. NOTE:- Serviceable PCC blocks as obtained from Sl Item No. 10 above shall be reused.

Material and labour for plain cement concrete (1:2:4), type B-1 using 20 mm graded coarse stone aggregate as in coping including necessary formwork and benching in bottom of manholes drain etc complete all as specified and as directed.

Material and labour for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces, mixed with water proofing compound and finishing the surfaces even and smooth without using extra cement complete all as specified and directed .

Supplying only integral liquid water proofing compound all as specified and as directed.

Material and labour for for preparation of newly plastered surface and applying two coats of cement base paint over a coat of primer on posts etc complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.

All as per Sl Item No 26 above but for 57cm inner girth of drain/ channel.

All as per Sl Item No 26 above but for 74cm inner girth of drain/ channel

Returning, filling in hard / dense soil spreading, levelling, watering and well ramming in layers n. exc. 25cm thick complete all as specified and as directed.

Removing excavated soil to a distance n. exc. 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and as directed.

Material and labour for for precast cement concrete (1:2:4), type B-1, using 20 mm graded coarse stone aggregate as in cover slabs set in CM (1:6) complete all as specified and as directed.

Material and labour for TMT steel bars 6 mm to 8 mm dia, cut to length, bend to shape required, including cranking, bending and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.

Material and labour for day to day cleaning of chocked up sewage lines, manholes, gully traps, floor traps, WCs and waste pipes by rodding or by any other means. also taking out sludges, mud, sand, ashes, fibre, silt, grease, roots, vegetation etc or any foreign materials appeared in manholea and sewage lines of any dia due to daily uses and causing closing or chocking including attending day-to-day complaints of chocked up manholes, sewage lines etc., pertaining to TB-I, CIW, HRDC, OTM Accn and MD Accn, sports company pertaining TB I area to be received daily from the complaint cell situated in the premises of office of the AGE B/R-II (C) Kirkee and entire complaints are to be attended for cleaning on the same day, minimum number of labours with specialised experience will not be less than 02 Nos safaiwala from 0830 hrs to 1700 hrs, including Sunday and holidays to attend emergency complaints. No extra payment shall be admitted for working on sundays/holidays. If the contractor will not able to provide the man power, the recovery of Rs. 350/- per person per day will be deducted.

Demolition/ Dismantling of precast interlocking tiles/ paver blocks/ chequered tiles of any description thickness and size complete all as specified and as directed.

Material and labour for 50 mm thick sand filling under floors or foundations including watering and consolidation complete all as specified and as directed.

Material and labour for 75 mm thick plain cement concrete (1:4:8), type D2 using 40mm graded stone aggregate as in sub base complete all as specified and as directed.

Material and labour for providing 60 mm thick machine pressed precast concrete interlocking paver blocks of any shape and size conforming to IS-15658-2006, with grey cement and pigment, rubber moulded tiles M-35 Grade, as in floors, pavings, path etc. complete laid over 15 mm thick screed bed layer in cement mortar (1:6) complete all as specified and as directed.

Material and labour for chequered cement concrete tiles, rubber moulded 300x 300 x 25mm thick set, jointed and pointed in neat cement slurry as in floors, with grey cement and pigments over and including 15 mm thick screed bedding in CM (1:6) complete all as specified and directed

Material and labour for providing precast cement concrete louvers and jallies, 35 mm thick (measured solid), including all mouldings using cement concrete type B0 (1:2:4), using 12.50 mm graded stone aggregate set in cement mortar (1:4) complete all as specified and as directed.

Material and labour for removing the leaking outlet bends of 100mm / 75 mm dia and repairing leaking joints by PVC solvent or ordinary cement and closing the gap in outlet by cement sand mortar for making leakage free duct walls followed by removal of weeds and vegetation on outlet side with hand tools only and injecting Monsanto's herbicide to prevent the growth of new plants in future, finishing complete all as specified and as directed. NOTE:- Changing of new fittings, unserviceable pipes, bends and nahani traps will be measured and paid seperately.

Material and labour for preparation of old plastered or unplastered surfaces of wall and applying one coat of cement based paint complete all as specified and as directed.

Excavating in post holes each n.exc. 0.5 cum getting out returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25cm thick watering and removing surplus soil to a distance n.exc. 50 m and making good surface complete all as specified and as directed.

Material and labour for plain cement concrete (1:3:6), type C-2, using 40 mm graded stone aggregate as in post/strut foundation complete all as specified and as directed.

Material and labour for rolled mild steel work conforming to Fe-410-0 or Fe-310-0 Grade as in 65 x 65 x 5 mm angle iron fencing posts and struts in fencing including cutting bending top to shape as directed drilling holes matching for barbed wire, including fillets on back side of fencing post and all necessary drilling work complete and all as specified and as directed.

Supply an fix in repairs, Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings, straining and fixing to any type of post including screwing or tying at crossings with and provision of galvanised mild steel wire, staples as directed including taking out existing damaged barbed wire all as specified and as directed.

Dismantling mild steel work of any description and in any position complete all as directed by Engr-in-Charge.

Material and labour for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering to doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410-W(Gde- E-250) quality-A all as specified and as directed.

Material and labour for plain, black mild steel sheeting as in gates, 1.25mm thick sheet welded or shouldered to angle iron frame complete all as specified and as directed.

Material and labour for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders, walk ways; railings conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Dismantling chain link fencing of any gauge and size not exceeding 4 Kg/sqm complete all as directed by Engr-in-Charge.

Supply only chain link fencing using 3mm dia GI wire 75x75mm mesh including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed by Engr-in-charge.

Fixing only chain link fencing including line wires, any mesh, size & type to any type of standards, rails, straining blots, etc. including provision of binding wire complete all as specified and directed.

Material and labour for mild steel flat iron of size as directed as in fixing clamps or support to chain link fencing, stiffners etc fixed with nut and bolts including making necessry holes complete all as specified and as directed.

Material and labour for mild steel bars 10mm dia and over cut to length bent to shape for stiffners etc and similar work complete all as specified and as directed.

Material and labour for rolled mild steel screw bolts (machine made) 5 ot 10mm dia of shank with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut exc. 5cm but n.exc. 10cm long complete all as specified and as directed.

Material and labour for preparation of new steel and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

MAHESH DADAJI BACHHAV

M/s ESS KAY Construction

Shri Sant Cosntruction

DARSHAN ENTERPRISES

M/S S H KHAN ENTERPRISES

ARK ENTERPRISES