PROVISION OF CERTAIN REVENUE WORKS AND MINOR WORKS UNDER GE 864 EWS AT BB CANTT, SRINAGAR

Surface dressing n exc 15 cm deep in any type of soil, complete all as specified and directed.

Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & n exc 1.5m depth and getting out for any type of soil, complete all as specified and directed.

M&L for Plain cement concrete 1:4:8 type D2, using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete, complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4, complete all as specifed and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed.

Removal of excavated materials n. exc 50m and depositing where directed at a level n exc 1.5m above the starting point, complete all as specified and directed.

M&L for 40mm thick damp proof course to horizontal or vertical surfaces including necessary formwork in cement concrete 1:2:4, type B-0 using 12.5 mm graded crushed stone aggregate ,complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4, complete all as specifed and directed.

Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, etccomplete all as specified and directed.

S&F 16mm dia mild steel screw bolt (machine made) with hexagonal or square head at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal and one square nut, complete all as specified and directed.

M&L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

S & F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S & f for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an strength of 550 Mpa as in roof covering/cladding to wall and as in eaves bd etc, fixed with self tapping screws,complete all as specified and directed.

M & L for 10mm thick rendering on other than fair faces of brick work or concrete surface in CM 1:6 to be finished even and smooth without using extra cement , complete all as specified and directed.

M & L for 15mm thick rendering on fair faces of brick work or concrete surface in cm 1:4 to be finished even and smooth with out uing extra cement complete all as specified and directed.

M & L for preparation of new plastered surface on walls and applying three coats white wash, complete all as specified and directed.

M&L for Preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed.

M & L for broken stone hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 100 mm thick Plain cement concrete 1:2:4 type B2 using 40 mm graded crushed stone aggregate as in sub base to floors, complete all as specified and directed.

M & L for 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection / hard standing etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 complete all as specified and directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 , complete all as specified and directed

M&L for glazed ceramic coloured tiles of size 350x250x7mm /450x300x7mm thick, best quality as in skirting, dados, walls, vertical surfaces etc., set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles, over and including 10mm thick rendering in CM 1:4, complete all as specified and directed.

S&F vitreous china wash basin, white, flat back, size 550x400mm including waste chain & plug and porcelean stopper and including brackets, coupling 32mm, waste pipe etc , complete all as specified and directed .

M&L for Stop/Angle valve 15mm bore, cast copper alloy screwed down, high kpressure, with crutch jor butter fly handlel, screwed bosth ends for iron pipe or for unions ,complete all as specified and directed.

S&F CP fancy type mixture tap of std quality for mixing hot & cold water (WHB)as approved by Engr-in-Charge with centre hole mixer with fittings ,complete all as specified and directed.

M&L for Vitreous china bowl urinal flat back, of size 465x355x265mm white (minimum), with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including discharge pipe of PVC 32mm dia and urinal spreader CP of 15mm dia, complete all as specified and directed.

S&F Vitreous China squatting pan "Orissa Pattern" size 580 x 440mm white with integral foot rests etc ,complete all as specified and directed.

S&F 10 Litres capacity PVC valveless syphonic action type flushing cistern,low level white with inlet ball valve float and handle incl brackets , with flush pipe etc fixed, complete all as specified and directed.

S&F Bib tap cast copper alloy chromium plated fancy type with crutch of butterfly handle, screwed down, screwed for iron pipe of for brass ferrule of 15mm bore ,complete all as specified and directed.

S&F CP fancy type mixture tap of std quality for mixing hot & cold water as approved by Engr-in-Charge with wall mounted with fittings, complete all as specified and directed.

S & F tubular towel rail 60cm long, aluminium anodised fixed with and including CP brass screws and wooden/plastic cleats, complete all as specified and directed.

S&F Soap dish chromium plated,any type, fixed to wall with chromium plated brass screw, complete all as specified and directed.

S & F CP steel grating 100mm dia , complete all as specified and directed.

S&F PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement, complete all as specified and directed.

S&F PVC connection 15mm dia and 600mm long with PTMT nuts and washer, complete all as specified and directed.

S&F PVC connection 15mm dia and 450mm long with PTMT nuts and washer, complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall /floor /laid in trenches etc, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend or tee or radius with access door, complete all as specified and directed.

S&F 110mm PVC (SWR) vent cowl, complete all as specified and directed.

S&F PVC gully trap square or round mouthed type (P) , size of trap 125x 110mm and jointing to drains with solvent cement, complete all as specified and directed.

S&F GI steel water tubing 20 mm bore medium grade galvanized with all fittings and fixed to walls, ceilings or laid on floors, complete all as specified and directed.

S&F GI steel water tubing 15 mm bore medium grade galvanized with all fittings and fixed to walls, ceilings or laid on floors, complete all as specified and directed.

M&L Lagging to pipes 20mm dia used in internal water supply or plumping all round with,25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144 kg/cum conforming to IS-9842, complete all as specified and directed.

S & F 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F 15 mmGun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed ,complete all as specified and directed.

S&F, rotational moulded polythylene water storage tank 500 Litres capacity (Cylinderical vertical with closed top) hoisted and fixed in position ,complete all as specified and directed.

S&F 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms), complete all as specified and directed.

S & F aluminium powder coated ventilators made of the following specifications :- (Net external size of ventilator shall be measured. Following items are included in this unit rate.) (a) Aluminium frame powder coated stiles, bottom, top and middle rail of hollow section 50 mm x 25 mm x 1.80 mm thick. (b) Lower portion of ventilator shall be fixed with 3 mm thick pin headed glass fixed with suitable aluminium beading clips and EPDM beading (rubber). (c) Upper portion shall be fixed with aluminium powder coated louver guides fixed with 3 mm thick pinheaded glass with suitable EPDM beading incl suitable handle and clips. (d) Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with suitable frame in upper panel. (e) Repair to the jamb, cills and all sides around the window is incl in unit rate. The repair finishes to match the existing surfaces like tiles, plastering etc.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

S&F butt hinges, medium weight cold rolled, mild steel of size 100 mm , complete all as specified and directed.

S&F 150 mm long aluminium barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F 150 mm aluminum alloy handles, fabricated type, anodised, complete all as specified and directed.

S&F Aluminium alloy, anodised sliding door bolt 200mm long, complete all as specified and directed.

S&F of Anodised aluminium snap grid frame work for false ceiling having size of grid 605 x 605 mm including hangers 6mm dia G.I (upto 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of G.I flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long and providing and fixing decorative designed patten (approved by the GE) Gypsum board 12mm thick in ceiling fixed with screw or as per manufacturers instructions, complete all as specified and directed.

M & L excavation in post holes each n.exc 0.50 Cum and getting out in soft/loose soil and removing surplus soil to a distance n exc 50 M and making good surface, complete all as specified and directed.

S & F Compound girders & stanchions, lattice griders, aerial masts, staging for water tanks & the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates etc. of Gde Fe 410-W (Gde- E-250) Qty-B,complete all as specified and directed.

M&L for pre cast cement concrete cover slab (1:2:4), type B1 using 20 mm graded crushed stone aggregate as in manhole chamber covers, drain covers, etc of required size shape set in cement mortar (1:4) including necessary form work ,complete all as specified and directed.

M&L for TMT steel reinforcement bars 8 mm to 10mm dia as in reinforcement cut to lengths bent to shape required including cranking, bending and binding with mild steel wire (annealed ) not less than 0.9mm dia,complete all as specified and directed.

M&L Plain cement concrete (1:2:4), Type B1 using 20mm graded crushed stone aggregate as in coping and benching to manholes including weathering, slightly rounded or chamfered with necessary form work , complete all as specified and directed.

M&L plain cement concrete (1:2:4), type B2, using 20 mm graded crushed stone aggregate as in surface channels inside manholes, etc including necessary form work ,complete all as specified and directed.

Supplied and fixed Rotational moulded polyethlene water storage tanks three layers of 1000 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms & fixing of inlet, outlet & over flow pipe etc ,complete all as specified and as directed.

M&L for Making single phasing point wiring system used as copper conductor wire for phase and neutral wiring system the wire made out of PVC insulated FRLS of 1100 volt grade with having multistranded copper conductor wire of size 1.5 Sq.mm (Nominal area) ISI marked drawn through wiring system surface on wall or concealed in wall with the help of heavy duty ISI mark PVC casing capping strip / PVC conduit pipe ISI mark in any lengthy wiring system and along with its all connected fittings accessories including providing of pressed steel terminal sunken boxes or heavy duty PVC box and duly fixed it concealed in wall or surface on wall and alongwith providing of back and face top covered plate frame or electro plated plastic laminated sheet for housing / mounting of any type/size switches sockets, regulators etc and including using /drawing of one run of single wire 1.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI marked with multistranded copper conductor wire used as a continuous earth wire for point wiring complete system and including making the good to all disturbed surfaces of wall/ceiling area of new wiring system and to match to it as per the existing surface of wall/ceiling etc complete all as specified and directed.

Description all as per serial item No 64 here-in-before, but one light point / fan point wiring system controlled by one way switch, complete all as specified and directed.

Description all as per serial item No 64 here -in- before , but one 3/5 pin type 5 Amp socket outlet point fixed on same board and controlled by one switch of one way point wiring system, complete all as specified and directed.

Description all as per serial item No 64 here-in-before, one 3/5 pin type 5 Amp socket outlet point fixed on independent board and controlled by one switch of one way point wiring system complete all as specified and directed .

Description all as per above serial item No 64 here- in- before but using PVC insulated FRLS wire 1100 volt grade with multistranded copper conductor wire of size 2.5 Sq. mm (Nominal area) ISI Marked for power socket point on indenpent board point wiring system and also providing of 2.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI Marked with multistranded copper conductor wire used as a continuous earth wire for power point wiring system, complete all as specified and directed.

Supply & fixing modular type switch 5/6 Amps 220 Volts AC,one module, complete all as specified and directed.

Supply and fixing modular type socket of 5/6 Amps 220 Volts AC, 3/5 multi pin type with two modular, complete all as specified and directed.

Supply and fixing modular type switch of 15/16 Amps 220 Volts AC one module, complete all as specified and directed.

Supply and fixing modular type socket of 15/16 Amps 220 Volts AC 5/6 multi pin type with two modular, complete all as specified and directed.

Supply and fixing ceiling rose three terminals type made out of polycarbonate , isolated body, complete all as specified and directed.

Supply and fixing LED mirror light fitting with high out put diffuuser 2 feet long of 10 Watt 220 volt AC decorative type with driver holder and LED lamp with having energy efficient type use in both warm/white type colour complete light fitting set all as per existing fitting type/ size of sample /model and make and including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting and making electric connection, complete all as specified and directed.

Supply and fixing LED tube light fitting of 1x 20W/22W 220V AC decorative box type with driver, holder including LED tube light with having energy efficient type use in both warm/white type colour complete including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting, compete all as specified and directed.

Supply and fixing LED street light fitting for buildings of rated capacity 35 Watt 230 volt AC with having LED driver,lamp bracket with impact and corrosion resistant with lense embeded including thermal management in multiple optices complete with IP 65/66 protectiuon suitable for out door type made out of high pressure die cast hosing with heat resistant glass complete including providing of suitable size of dia GI pipe light grade bracket and it to match/setting the new fitting fixture hole attechment system of suitable bracket length upto 1.2 mtr long and make to shape / bend of 120 degree angle including duly fixed alongwith existing pole /bldg wall/ roof with the help of 02 Nos of MS fixing clamp alongwith nut bolt and including providing of suitable type of flate fexible two/three core cable and making electric connection, compete all as specified and directed.

S & F sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrangment system suitable of rating of size/type of distribution board SPN 4 way type 220 volt AC supply system with IP-43 protection system and having mounting chanel with having suitable rating of copper bus bar and suitable size of common neutral and earth link and also making all necessary electrical connection and duly fixed surface on wall or conceled in wall with the help of cutting chases to wall for fixing of DB and making good the disturbed wall surface, complete all as specified and directed.

Supply and fixing MCB SPN 40 to 63 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection, complete all as specified & directed

Supply and fixing MCB SP 06 to 32 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection, complete all as specified and directed.

Supply & fixing ventilating exhaust fan made out of mild steel body, complete with louvers,and shutter operational of size 300 mm sweep suitable to work on 230 Volts 50 Hz, 1200 RPM, coper winding including making of suitable type /size of hole on wall , compete all as specified and directed.

Supply, laying and testing of LT cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 volt grade cross sectional area of size 10 sqmm 2 core including laid in trenches or fixing on poles or passing through pipes, complete all as specified and directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in any type of soil, compete all as specified and directed.

S&F 40 mm bore galvanised steel tubing, light grade, ISI marked, for protection of under ground cable on pole/wall/under road , compete all as specified and directed.

M&L cutting of road up to a size not exc 0.40m wide and not exc 0.60m depth for laying of water pipe lines making good the disturbed surfaces so as to match with existing finishing with PCC 1:2:4 type B1, cement motor in CM 1:2, complete all as specified and directed.

S&F GI steel water tubing 25 mm bore medium grade galvanized with all fittings and fixed to walls, ceilings or laid on floors, complete all as specified and directed.

S&F GI steel water tubing 50 mm bore medium grade galvanized with all fittings and fixed to walls, ceilings or laid on floors, complete all as specified and directed.

Supply, laying and testing of Polypropylene random copolymer(PP-R) (PN-20/SDR 6)-3 Layers pipes 25mm outer dia, UV stabilized and antimicrobial welded having thermal stability with and including all PP-R plain & brass threaded polypropylene random fittings fixed such as bends, Elbow, Tee, Short Length, Socket, Union, Check Nuts, Nipples etc. (Females/Males as required), suitable for hot & cold water supply line laid in trenches, to walls and ceilings or laid in floors and including testing , complete all as specified and directed.

Supply and fix 25 mm bore PPR Gate Valves (Brass Insert) including taking down of unserviceable gate valve, complete all as specified and directed

Supply and fix 63 mm bore PPR Gate Valves (Brass Insert) including taking down of unserviceable gate valve, complete all as specified and directed

S & F tank Nipple suitable for HDPE water tank, complete all as specified & directed.

S & F pressure reducing valve of size 50mm bore brass type, compete all as specified and directed.

S&F Ball brass valve of size 20mm dia, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed, compete all as specified and directed.

S&F Straight plain brass ferrules (or connecting screws) screwed both ends and fixed of size 50 mm dia, compete all as specified and directed.

S&F round PVC bedded with PVC insulated and sheathed with multi stranded FRLS cable of 1100 volt grade with multistranded copper conductor wire of size 10 Sqmm 4 core type (Nominal area), compete all as specified and directed.

S&F for sub main wiring with two runs PVC insulated FRLS wire, 1100 volt grade with multistranded copper conductor wire single core of size 2 runs of 4 Sqmm and 1 run of 4 Sqmm (Nominal area) (ISI Marked) any type any length drawn through in heavy duty ISI marked PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed in wall or surface on wall and making good all disturbed surfaces match to the existing surface,complete all as specified and directed. Note: 3 runs of 4.0 Square mm cable and one run of conduit/ casing capping shall be measured and paid as one unit.

S&F Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 8 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces, compete all as specified and directed.

Supply and fixing of MCB, TP 415 Volts, 63 Amps, 10 KA breaking capacity, complete all as specified and as directed.

Material and labour for earthing with galvanized mild steel earth plate electrode 60 centimetre x 60 centimetre x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below ground level, the top edge of the earth plate at a depth of not less than 1.5 metres below ground level connected to galvanized iron earth wire of 4 mm dia by means of bolts, nuts and washers made out of GI / steel earth wire protected by GI light grade pipe 15 mm bore, 20mm dia light grade galvanised iron pipe with funnel wire mesh for watering and connecting to main switch board / control board all s shown in electrical plate of SSR Pt - I connected to earthing test point and including testing on completion complete all as specified and as directed. NOTE: The unit rate shall also include for excavation, earth work in hard/dense soil, plain cement concrete 1:3:6 type C1 by using 20 mm graded aggregate in pit, 50 mm thick reinforced cement concrete 1:2:4 type B1 using 20 mm graded aggregate cover duly reinforced with 8 mm dia TMT bars @ 100mm centre to centre both ways, galvanised iron funnel with watering pipe, wire mesh, complete all as specified and directed.

S&F single core copper wire of size 2.5 Sqmm green colour for earth wire connected to equipment from earth test point, complete all as specified and as directed.

S&F in rigid non metallic PVC conduit pipe of size 25 mm bore with all fitting including providing clamping arrangement attachment for holding of pipe on wall in proper size of clamps, nut bolt and washer etc, complete all as specified and directed.

S&F in rigid non metallic PVC conduit pipe of size 15 mm bore with all fitting including providing clamping arrangement attachment for holding of pipe on wall in proper size of clamps, nut bolt and washer etc, complete all as specified and directed.

Supply and fixing of sheet metal encloser made of plasic body for fixing MCB, TP 415 Volts, 25-63 Amps, 10 KA breaking capacity ,complete all as specified and as directed.

Supply and fixing gang box 3 way for 15 Amp Switch socket comnination, compete all as specified and directed.

Supply and fixing Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal, compete all as specified and directed.

Supply, fixing, installation, commissioning and testing of three star rated inverter type hi wall mounted split AC unit of rated capacity 2.0 TR invertor based hot and cold type indoor and out door unit complete set with having both cooling and heating function and digital inverter type complete with cordless remote control and full filling of initial refrigerant gas along with having in built heating and cooling arrangement and invertor rotary compressor unit and suitable for operation for 230 Volt 50Hz single phase electric supply including providing of MS stand & bracket for fixing of outdoor unit and indoor unit system and also providing of both type/size of suction and discharge copper refrigerant piping attachment system in any lengthy and duly fixed both piping connected from outdoor unit to indoor unit attachment system complete along with duly over lapped it by nitrile insulation, with insulation taping work and also providing of suitable size of drain pipe line system up to ground level for dropping out the condensing water outside area from evaporator unit attachment system and making electric connection with 3 core copper cable of suitable size and including making of hole on existing type wall/roof/ceiling etc and after making good to all disturbed surface match to existing wall ,complete all as specified and directed.

Supply, fixing,installation,commissioning and testing of wall mounting hanging based automatic operation based digital type voltage stabilizer unit of rated capacity 5 KVA complete and suitable using for single phase naturally air cooled indoor type with having digital display and suitable for operation on single phase AC supply and with having designed voltage for input & output voltage up to 130 Volt to 230 Volt with accuracy + 2.5% and having low and high voltage cut low voltage cut off 130 (-) 5 volts high voltage cut off 230 V (+ 5) Volts along with start time delay system with time delay adjustable up to 30 second to 1.5 minutes system unit ,complete all as specified and directed.

Supply and fixing of sheet metal enclosure duly powder coated with single pole and neural enclosure with having a two pin and earth plug & top and mounting channel along with one 01 MCB SP 32 Amp and dully fixed surface on wall or concealed in wall and making all necessary electrical connection including taking down of existing DBs a as required at site or, compete all as specified and directed.

Supply and fixing of Sub main wiring system with PVC insulated FRLS wire,1100 volt grade with multistranded copper conductor wire of size 2 Run of 6 Sqmm and 1 Run of 06 Sqmm (Nominal area) any type any length drawn through concealed in wall along with PVC conduit pipe heavy duty with its all fittings and connected accessories , complete all as specified and directed . Note: 3 runs of 6.0 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit of running metre.

Supply & fixing of wall mounted fan 400 mm sweep single phase 230 Volt Ac complete with blade and connecting fixing accessories , compete all as specified and directed.

Supply and fixing of sheet metal enclosure duly powder coated with double pole and neural enclosure with a two pin and earth plug and top and having mounting chanel and complete with one 01 MCB SP 20 Amp and making all necessary electrical connection and dully fixed surface on wall or concealed on wall and making good the disturbed wall surface all as required at site, compete all as specified and directed.

Supply & fixing electric water hearter storage type steel body with inner cooper tank and heating elements up to 2KW of storage capacity 25 Litres 5 star rated complete with all connecting fixing accessories, compete all as specified and directed.

Supply, laying and testing PVC insulated, PVC Sheathed cable galvanized steel strip or wire armoured electric control cables (Heavy) with stranded copper conductor of size 3 core 2.5 sq mm,1100 volts grade, compete all as specified and directed.

Supply and laying pipes MS ERW steel of 100mm bore including specials, as per IS - 1239 (2004) 6.00mm thick and including cutting work, welding work laid in trenches/open, complete all as specified and directed.

Supply, laying and fixing GI steel water tubes, medium grade, ISI marked, galvanized with all fitting laid in trenches, to walls and ceilings or laid in floors, complete all as specified and directed for following bore of pipes :-

80 mm bore.

100 mm bore.

S&F CI rising spindle sluice valve 100mm bore flanged both ends confirming to IS-14846(2000), Class PN-1.6 with steel spindle with iron hand wheel including all necessary fixing arrangement such as MS nut, bolt washer gasket etc, complete all as specified and as directed.

M & L for CI non return valve 100mm dia without by pass arrangement confirming to IS-5312 part-I, PN 1.6 including nuts, bolts, washers and gaskets, complete all as specified and as directed.

M & L for CI flanged ''T'' type strainer 100mm dia with SS mesh for following sizes, working pressure PN 1.6 along with nuts, bolts, washers and gaskets, complete all as specified and as directed.

Supply, install, testing and commissioning of Servo controlled voltage stabilizer 15 KVA ( Confirming to BIS 9815:Part1 :1994) Three phase,50 Hz, Naturally Oil cooled, indoor, unbalanced type, copper wound, metallic body duly powder coated with lifting Hooks four nos , digital display type, relay free smooth and silent operation with 1st filling of Transformer oil (ISI marked, BDV value not less than) up to level having following specification :- (i) Input voltage 300V-480V, (ii) Output voltage stabilized at any deigned/desired voltage 415V +- 1% (iii) Rated frequency 50 Hz (iv) No distortion in wave form (v) Response time not to exceed 20 mille seconds (vi) Sensitivity (+/-)1% (vii) Rate of correction 8 Volt/second for single phase and 13 V/seconds for phase to phase (viii) Efficiency more than 95% (ix) Type of load : three phase, unbalanced type (x) Digital display Voltmeter/Ammeter Protections :- (i) Over load/Short Circuit protections (ii) High/Low voltage cut off (iii) By pass arrangement in case of emergency (iv) Single phase sequence change protection Capacity 15 KVA.

M&L cutting of road up to a size not exc 0.60m wide and not exc 0.80m depth for laying of water pipe lines making good the disturbed surfaces so as to match with existing finishing with PCC 1:2:4 type B1, cement motor in CM 1:2, complete all as specified and directed.

Material and labour for sub main wiring with two runs of single core FRLS PVC multistranded stranded unsheathed copper conductor cable of size 2.5 square mm and drawing in PVC Casing caping with accessories on surface in wall/roof along with one run of 2.5 square mm FRLS PVC insulated unsheathed multi stranded 1100 volts grade with copper conductor cable as earth continuity conductor connected to earth and earth dolly, connecting to main board including removing the existing wiring and making good the disturbed wall surfaces to match with the surroundings, complete all as specified and directed. Note: 3 runs of 2.5 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit of running metre.

S & F MCB SP 240 volts suitable for fixing in MCB DB of capacity 40 amps,complete all as specified and as directed

Please Enable Macros to View BoQ information