Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.1 LAccepted-AOC NO 9A VINAYAKANILAYA KANAKA GANAPATHI STREET OM SHAKTHI LAYOUT KANAKAGIRI HORAMAVU POST BANGALORE 560 043 | BENGALURU URBAN | KARNATAKA | 560043 | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹43.0 L+₹2.6 L (6.57%)Rejected-Finance | L2 | Rejected-Finance Rejected. Quoted rates are higher than L1 | |
| 3 | L3₹43.8 L+₹3.5 L (8.78%)Rejected-Finance | L3 | Rejected-Finance Rejected. Quoted rates are higher than L1 | |
| 4 | L4₹43.9 L+₹3.6 L (8.97%)Rejected-Finance 21 9TH MAIN 4TH CROSS GOWDAKEHOLA BAGALAKUNTE NAGASANDRA POST BANGALORE 560073 | BENGALURU URBAN | KARNATAKA | 560073 | L4 | Rejected-Finance Rejected. Quoted rates are higher than L1 |
Tender Value
Refer Docs
EMD Value
₹99,960
Closing Date
2 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer M AF Jalahalli
Garrison Engineer M AF Jalahalli
SPL REP TO BLDG No P 11 AND CERTAIN SANCTIONED WORKS AT AFTC KV SCHOOL No 1 AND AF STN JALAHALLI
2023_MES_628700_1
8832/E8
Open Tender
Civil Works
Item Rate
151 days
Jalahallii
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE AF MAINT JALAHALLI PUBLIC FUND ACCOUNT
₹99,960
18 Jan 2024
5 Dec 2023
4 Jan 2024
5 Dec 2023
2 Jan 2024
19 Dec 2023
5 Dec 2023 - 12 Dec 2023
Amount
Surface dressing not exc 15cm depth in soft soil, complete all as specified and directed.
Excavation in trenches n'exc 1.5m wide and n'exc 1.5 mtr depth for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. nexc 10 sq m on plan and n exc1.5 m in depth for sewage pipe line and manhole etc and getting out in hard/dense soil, complete all as specified and directed.
Material and labour Cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foudation, filling and mass concrete, complete all as specified and directed.
Use and waste form work flat rough finished to sides of concrete foundations, footings, bases of columns, columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, complete all as specified and directed.
Material and labour RCC M25(Design Mix 20mm graded crushed stone aggregate) for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and as directed.
Use and waste form work to sides of pillars,posts, struts, piers, columns and stanchions for rough finished surfaces of concrete square, rectangular shape complete all as specified and as directed.
Material and labour RCC M25(Design Mix 20mm graded crushed stone aggregate) For columns, pillars, piers , posts and struts, complete all as specified and as directed.
Use and waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n exc 200mm thick, complete all as specified and directed.
Material and labour Formwork To chajjas and similar items including edges, complete all as specified and directed.
Material and labour RCC M25 (Design Mix 20mm graded crushed stone aggregate) as in chajjas and in shelves and like, complete all as specified and directed.
Use and waste Formwork For Lintel and soffits of floor or roof beams, beam haunching incl supports, overhangs, etc also splays between floors and beams etc, complete all as specified and directed.
Material and labour RCC M25 (Design Mix 20mm graded crushed stone aggregate) as in floor/roof Slab and roof projection Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.
Material and labour for TMT bars 10mm dia & over cut to length bent to shape required including cranking bending spirally for hoping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with chip with quality confirming to FE 500/FE 500D, complete all as specified and directed.
Material and labour for TMT bars 6mm to 8mm dia cut to length bent to shape required including cranking bending spirally for hoping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with chip with deep quality confirming to FE 500/FE 500D complete all as specified and directed.
Material and labour for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
Material and labour for Preparation of new plastered surfaces and applying three coats of white wash on walls, complete all as specified and directed.
Material and labour for preparation of new plastered or unplastered surfaces of ceilings including cornices, etc and applying three coats of white wash, complete all as specified and directed.
Material and labour Preparation of newly plastered surfaces of walls and applying two coats of cement base paint on walls over a coat of alkali resistant primer, complete all as specified and directed.
Material and labour for 100mm thick PCC 1:3:6 type C2 using (40mm graded crushed stone aggregate) as in sub base for flooring, surface finished even and fair, complete all as specified and directed.
Material and labour Machine cut kota stone slab 20-25 mm thick as in flooring, laid over and incl 20 mm thick screed bed in CM 1:3 set and jointed in neat cement slurry and pointed with cement and pigment to match the shade of the slab incl rubbing and polishing complete all as specified and as directed.
Material and labour Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixinglugs, hinges, lock strike plate,etc., complete, as specified and directed,supplied and fixed
Supply and fixing mild steel plate plain, square cut or notched (ordinary or counter sunk), forming holes with riveted, bolted or welded attachement etc. and hanging also fastening and fixing complete conforming to Gde Fe 410 W (Gde E-250 Quality A) complete all as specified and directed.
Material and labour for preparation of new steel surfaces of any discription over 10cm width or girth not otherwise described and apply two coat of synthetic enamel paint over one coat of red oxide primer,complete all as specified and directed.
Material and labour for Brushing neat cement slurry @ 3kg/sqm all as specified & directed.
Material and labour PCC 1:2:4 type B0 using 12.5 mm graded crushed stone aggregate as in concrete padding laid to required slope incl finishing the concrete surface fair and even without using extra cement complete all as specified and as directed.
Material and labour for 10 mm thick screed bed or bedding layer of cement mortar (1:4) for laying roof finish as padding using with WPC @ 3% by weight of total cement, complete all as specified and directed. NOTE :- Integral WPC shall be measured and paid separately.
Material and labour for Apply oil bound bitumen primer @ 0.40 Litre / Sqm manufactured by the same agency as that of APP with density of 0.87 to 0.89 Kg / Litre at 25 degree Celsius on the prepared dry roof surface, complete all as specified and directed .
Material and labour APP polymeric membrane min weighting 3.5kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric(wt not less than 150 gms/sqm laid on primed surfaces by torch application method complete all as specified and directed .
Material and labour for preparation of new surfaces of any description not otherwise described over 10cm width or girth and applying two coats of solar reflective aluminium paint @ 0.10 kg/sqm on membrane surfaces, complete all as specified and directed.
Material and labour for Ist quality Vitrified Ceramic tiles (dark shade)10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand including laid over 15mm thick screed bed in CM 1:4 to recieve tiles and including dismantting floor , hearth or wall tiling with cement mortar bedding (but not backing) removing serviceable tiles and removing debris from the site, complete all as specified and as directed. .
Taking down cement plaster on stone wall etc including racking out of joints hacking for keys, scrubbing down with water,complete all as specified and directed.
Material and labour 10 mm thick cement plaster in CM 1:6 on fair faces of brick work/concrete etc surfaces finished even and smooth without using extra cement, complete all as specified and directed.
Material and labour for cement plaster rendering 5mm thick in CM 1:3 on fair faces of brickwork or concrete surface as on ceiling, surface finished even and smooth with thin layer of sagol, complete all as specified and directed.
Material and labour for cement plaster rendering 15m thick on fair faces of brick/concrete surfaces with two coats i.e. (10mm thick backing coat in CM 1:6 and 5mm thick finishing coat in CM 1:4) and mixed with WPC @ 3% by weight of cement, surfaces, finished even and smooth without using extra cement, complete all as specified and directed. Note: (WPC shall be measured and paid separately)
Supply only liquid waterproofing compound (ISI marked) of approved make,complete all as specified and directed.
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed.
Material and labour for complete removal of existing treatment of old plastered surface of walls and applying one coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces, complete all as specified and directed.
Material and labour for preparation of new plastered surfaces of walls and applying two finishing coat of oil bound distemper over a coat of primer, complete all as specified and directed.
Material and labour for Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth, complete all as specified and directed.
Material and labour for Ist quality Non Skid coloured ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed in CM(1:4) including dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing debris from the site complete all as specified and as directed.
Material and labour for Ist quality coloured Glazed ceramic tiles in vertical surface of size 350mmx250mm x7mm / 450X350X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick rendering or bedding layer in cement mortar 1:3 complete all as specified and directed including dismantling old wall tiling including cement mortar bedding (but not backing) removing debris from site, complete all as specified and as directed..
Supply and fixing Anodised aluminium size 605 x 605 mm snap grid frame work as per manufacturer instructions for false ceiling all as specified including Dismantling wall and celling boards (fibers pulp insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets etc, complete all as specified and as directed.
Supply and fixing Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expand iron hold fasteners 12.5mm dia. 40mm long, complete all as specified and as directed..
Supply and fixing 10mm thick PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per site requirement, complete all as specified and as directed..
Taking down chowkats or frames and making good disturbed surfaces (without taking off shutters from the frame) area n exc. 1.5 Sqm each, complete all as specified and as directed.
Taking down chowkats or frames making good disturbed surfaces (without taking off shutters from the frame) area exc 1.50 Sqm n.exc 4 Sqm complete all as specified and as directed.
Supply and fixing 2nd class hardwood Plain, solid, straight, chowkat and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,complete all as specified and as directed..
Supply and fixing 30 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides, complete all as specified and as directed..
Supply and fixing 2nd class hardwood 35mm thick Glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); , complete all as specified and as directed..
Supply and fixing aluminium, anodised, barrel tower bolts 200mm long of extruded section, complete all as specified and as directed..
Supply and fixing aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section or cast aluminium alloy, complete all as specified and as directed..
Supply and fixing aluminium handles 150mm size, cast type, anodised, complete all as specified and as directed..
Supply and fixing overall length of cover plate 150mm long Floor door stopper of aluminium alloy body & tongue, anodised, with hard drawn steel spring fixed in floor, complete all as specified and as directed..
Supply and fixing hydraulically regulated door closer designation No 1 universal type aluminium of extruded section (ISI Marked) suitable for door shutters of weight not more than 35 kg and fixed with screws complete all as specified and directed.
Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for frame of doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDMrubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, star lock, rubber beading all complete as per architectural drawings and the directions of Engineer-in-Charge.
Supply and fixing repairs aluminium anodised grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC15) of approved design/pattern(DG 104), with approved standard section and fixed to existing window frame with CP brass/stainles steel screw not less than 50mm and @ 200mm c/c, incl cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section ( 28mm x 19mm x 2mm thick) around the opening complete all as specified and directed by the Engr-in-Charge.
Supply and fixing 100mm long butt hinges of stainless steel, complete all as specified and directed.
Material and labour Preparation of new wooden surfaces over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar incl all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles and removing debri from the site, complete all as specified and directed.
M & L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1 : 4, complete all as specified and as directed.
Material and labour Stone walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 ,complete all as specified and directed.
Material and labour extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified of random rubble walling uncoarsed or brought upto courses hammer dressing sand stone with max depression on face from straight edge held against the dressed surface n exc 20mm all as specified and directed.
Raking out joints/pointing to random or polygonal rubble, uncoarsed or brought upto courses in CM,complete all as specified and directed..
Material and labour for keyed pointing to random or polygonal rubble, uncoarsed or brought upto courses in CM 1:4, complete all as specified and directed..
Material and labour for Complete removal of existing treatment of walls and washing, rubbing down and stopping of painted surfaces and applying two coats of oil bond distemper over a coat of primer all as specified and directed.
Material and labour for preparation of old plastered or unplastered surfaces of ceilings including cornices, etc and applying one finishing coat of white wash, complete all as specified and directed.
Material and labour for preparation of old painted wooden surfaces of any description, not otherwise described, exceeding 10cm in width or girth and applying one finishing coat of synthetic enamel paint on , complete all as specified and directed.
Material and labour for preparation of old painted steel and iron surfaces of any description exceeding 10 cm in width or girth and applying one finishing coat of synthetic enamel paint complete all as specified and directed.
Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for including reoving debris from the site,complete all as specified and directed.
Material and labour PCC 1:3:6 type C-2 using (40mm graded crushed stone aggregate)as in foundation filling and mass concrete, complete all as specified and directed.
Material and labour 75mm thick PCC type D-2 (1:4:8) using 40mm graded crushed stone aggregate as in sub base of floor, complete all as specified and directed
Material and labour 100 mm thick, Cement concrete 1:2:4, type B2 using 40 mm graded crushed stone aggregate as in pavings, hardstandings and similar work surface finshed even and fair without using extra cement,complete all as specified and directed.
Material and labour hard core of broken stone of guage n exc 63mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.
Material and labour 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone agg) as in plinth protection, finished even and fair w/o using extra cement, laid in alternate panels inluding necessary form work etc complete all as specified and directed.
Supply and fixing in repair, Vitreous China wash down water closet pan (pedestal pattern) white incl traps, seat and cover; flush pipe & connecting pipe, for flushing cistern incl jointing to socket of flushing rim and connecting pipe to union of flushing cistern complete all as specified and directed.
Supply and fixing Wash hand basin flat back 550x400mm vitreous china (white) with cantilever CI/Angle iron brackets embedded in concrete block including Brass chromium plated waste coupling 32mm bore, Waste pipe of PVC 32mm bore, complete all as specified and directed.
Supply and fixing in repairs Vitreous China, half stall Urinal type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe, complete all as specified and directed.
Supply and fixing 15 mm bore Pillar tap cast copper alloy with capstan heads, chromium plated Fancy type screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long shanks and nut screwed for iron pipe, complete all as specified and directed.
Supply and fixing bib taps screwed down high pressure with both ends for iron pipe 15mm bore fancy type chromium plated,complete all as specified and directed.
Supply and fixing 15 mm bore fancy type chromium plated stop valve / angle valve cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe, complete all as specified and directed.
Supply and fixing Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed.
Supply and fixing in repairs for 2way bib cock 15mm dia with wall flange Complete all as specified and as directed.
Supply and fixing steel water tubing medium grade 20mm bore galvanised with all fittings to walls etc including taking up or down 20mm bore of old U/S GI pipe steel tubing and connections, complete all as specified and directed. .
Supply and fixing steel water tubing medium grade 15mm bore galvanised with all fitting to walls etc including taking up or down 15mm bore of old U/S GI pipe steel tubing and connections, complete all as specified and directed..
Supply and fixing PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.
Supply and fixing in repairs, 10litre capacity PVC , syphonic action type, flushing cistern, low level, white, with inlet, ball valve,pvc flush pipe, float and handle incl brackets and waste pipe, complete all as specified and directed.
Dismantling and taking down old U/S water storage tanks of 1000 Ltr capaciaty and Supply and fixing 1000 ltrs capacity rotatonal moulded polyethylene water storage tanks three layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including connecting the over flow drain out, inlet and outlet pipes, tank nipple, elbow, bend, union, sockets, incl ball brass valve high pressure of 25mm dia etc, complete all as specified and directed.
Supply and fixing Gun-metal Globe or gate valves 20 mm nominal bore dia with iron wheel head screwed both ends for iron pipes and fixed, complete all as specified and directed.
Supply and fixing Toilet paper holder of stainless steel fixed to walls with CP screws, complete all as specified and directed.
Supply and fixing in repairs 40mm bore unplasticised PVC pipe of pressure rating 10 kg/Sqcm fixed to walls, ceiling or laid in floors, complete all as specified and directed.
Supply and fixing in repairs 32mm bore unplasticised PVC pipe of pressure rating 10 kg/Sqcm fixed to walls, ceiling or laid in floors, complete all as specified and directed.
Supply and fixing frosted glass 4.0mm thick, pin head type n exc 0.5 sq.m in each pane and fixed complete all as specified and directed.
Supply and fixing aluminium alloy wire cloth, 0.45mm nominal dia of wire & average width of aperture 1.40mm with aluminium wire staples, complete all as specified and directed.
Supply and fixing 4 mm thick sheet glass ordinary quality in square n exc 0.50sqm each pane complete all as specified and directed.
Taking down existing copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials for taking credit and making good disturbed surfaces of walls, floors, etc, complete all as specified and directed.
Taking down submain wiring of any size and making good to the disturbed surface of wall, floors, ceiling etc, complete all as specified and directed
Taking down existing DBs including MCCB`s / MCB`s and making good the disturbed surfaces complete all as specified and directed..
M&L in repairs for point wiring FRLS with 1.5 sqmm single core PVC insulated, unsheathed 1100 volts grade, multi stranded with copper conductor drawn through and incl non-metallic PVC Conduit with accessories in wall/roof/ceiling etc incl MS modular terminal boxes, concealed surface to walls covered with modular plates with cover etc and 1.5 sqmm PVC insulated, unsheathed copper conductor multistranded FRLS cable 1100V grade as earth continuity conductor & connecting to common earth dolly complete all as specified and directed for following:- Make of Cable : Plaza/ Polycab/ Havells Make of Conduit : Supreme/ Diplast/ Avon Plast
(a) One light point controlled by one switch
(b) One ceiling fan/exhaust fan/wall mounting fan point controlled by one switch and a regulator
All as per item No. 100 here in before but for one switch socket outlet 3 pin 5 Amps on independent board
All as per item No. 100 here in before but for One 3 pin socket out 5 Amps on the same board,complete all as specified and directed.
All as per Sl No 100 above but wiring with 4 Sqmm copper multistranded unsheathed FRLS cable and 4 Sqmm copper FRLS cable for earth continuity conductor controlled by one 15A switch socket independently, complete all as specified and directed.
M&L flame proof Wiring complete for one light/ fan point controlled by one switch. with 1.5 sqmm single core PVC insulated, unsheathed FRLS cable 1100 volts grade, multistranded copper conductor drawn through stove enamelled steel conduit with all accessories fixed to the surface of wall/ roof/ ceiling etc and MS terminal boxes fixed surface/ concealed in walls covered with plastic laminated top cover 2.8mm fixed with cadmium plated iron screws etc including 1.5 sqmm PVC insulated, unsheathed copper conductor multistranded FRLS cable 1100V grade as earth continuity conductor and connecting to common earth dolly ,complete all as specified and directed..
Supply and fix modular switch 1 way 6 Amp.one module, complete all as specified and directed.. Make : Legrand (Model- Arteor), ABB (Cheiron), Anchor (Penta)
Supply and fix modular switch 1 way 16 Amp.one module, complete all as specified and directed. Make : Legrand (Model- Arteor), ABB (Cheiron), Anchor (Penta)
Supply and fix modular Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed. Make : Legrand (Model- Arteor), ABB (Cheiron), Anchor (Penta)
Supply and fix modular Socket, 16A - 2/3 pin combined 2 module,complete all as specified and directed. Make : Legrand (Model- Arteor), ABB (Cheiron), Anchor (Penta)
Supply and fixing Modular type Fan regulator, 2 module,step type,230 Volts,AC acomplete, all as specified and directed.. Make:- Havells/ Anchor/Crabtree
Taking down old celing fan / exhaust fan / wall mounting fan, sealing cable end, dismantling fan blades and paintig with synthetic enamel paint by spray painting after cleaning the dust and appling filter coat, serviceing the fans of any make and type including greasing / oiling/ repairs and raplacing the spares such as caterpin, bolts, split pins/ rubber reel, bearing, washer, bush, capacitor etc.. and hanging / fixing the same in position and connecting up suitable cable for making it functional, complete all as specified and directed.
Supply and fixing Ceiling rose PVC polycarbonate , isolated body 3 terminals 230 V complete all as specified and directed.
Supply and fixing in repairs of 4 feet surface mounted battern type luminaire with a power consumption not more than 16 W, luminaire lumen output of 2000 lumens, luminaire efficacy > 120 lm/W with an operating voltage range from 140V-270V. The luminaire shall have a white CRCA housing with a poly carbonate diffuser to provide uniform light and sleek design with width not more than. The luminaire shall have a CCT of 6500 K, CRI>80, power factor>0.95, SDCM<5, THD<10% and 50,000 burning hours as per L70B50 criteria. The luminaire shall have flicker content<5% and shall have high and low cut off with auto restart feature. The luminaire shall be EMI/ EMC complaint and shall have a internal surge protection of 4 KV. The luminaire shall have Class-1 Electrical insulation, Class-B serviceability (The driver can be replaced at site level). The luminaire shall not weight more than 7 Kg and the luminaire and driver shall be BIS approved with "R" number mentioned.Make Philips/Bajaj / Wipro.
Supply and fixing Sheet metal enclosure with distribution board SPN 230V Volts 8 ways Double door with suitable bus bar for provn for MCBs/ Isolators, fixed to wall and making all connections, complete all as specified and directed.. Make Havells / standard / Indo Asian
Supply and fix MCB SPN 6 to 32 Amps 240 volts,'C' curve, 10 KA rupturing capacity including connection complete all as specified and directed. Make: Indoasian/ Havells/ Legrand
Supply and fixing Sheet metal enclosure with distribution board SPN DB 8 ways Double door with suitable bus bar for provn for MCBs/ Isolators, fixed inside the PVC/SMC box and making all connections, complete all as specified and directed.. Make: Indoasian/ Legrand/ Standard
Supply and fixing Plastic plug and socket with enclosure three phase 63 A,415 V,3 pin with Neutral and earth complete all as specified and as directed. Make: Indo Asian/Havells/Legrand.
Supply and fix MCB single pole 6 to 32 Amps 240 volts,'C' curve, 10 KA rupturing capacity including connection, complete all as specified and directed. Make: Indoasian/ Havells/ Legrand
Supply and fixing Sheet metal enclosure MCCB distribution board VTPN 125 Amps,415 Volts 8 ways Double door with IP:54 protection,suitable bus bar for provn of MCCBs/ Isolators, fixed to wall and making all connections, complete all as specified and directed. Make: Indoasian/ Legrand/ Standard
Supply and fixing MCB TP 25 to 63 Amps rating, 'C' curve , 10 KA breaking capacity, 415 V, 50 Hz AC supply including making all connections, complete all as specified and directed. Make: Indoasian/ Havells/ Legrand
S&F in repairs 36 W LED recessed 2x2 luminaire with classic design & glare free soft illumination. Housing with white high reflection powder coated (RAL9016) CRCA sheet. Glare free, Opal diffuser for symmetrical light distribution fixed in separate CRCA sheet frame held in with housing by screws for easy maintenance. High efficiency long life LED package in integral module with lumen efficacy of >100 lm/w, viewing angle of 100° to ensure better uniformity. Powered by an independent Isolated, SELF Output electronic LED driver (SMPS based constant current supply) efficiency of 85% with built-in Surge protection 3Kv. System Lumen Output of 3000 lumens. CRI >80, Color temperature5700±300K, THD <10% and PF >0.95, IP20, IK02.Life class of 50,000 hrs @ L70, Operating Temperature: -10 TO +45 DEG.C; Input Supply Voltage Range:150-277 V, Frequency :50-60 HZ. Driver Safety requirement stds: IS 15885-2-13, Test Report to be submitted. Make : Bajaj Cat Part No Skylux - BZRSQL 30W GZi WH / Philips cat No RC 355 BLED 33-6500 PSU OD WH or equivalent in Wipro.
M&L for Sub main wiring with PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded copper conductor cable 2 runs of 4 sqmm drawn through in and incl suitable size surface PVC Conduit/ existing concealed conduit and all accessories fixed to wall/floors along with 4 sqmm PVC insulated unsheathed FRLS copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down existing sub main wiring of any description, complete all as specified and directed. Note: (a) 2 runs of 4 sqmm cable along with one run of 4 sqmm cable for earth conductor shall be measured as one length. Make:- Havells/ Polycab/ Plaza.
Supply and fixing MCCB 4P 100 Amps rating,16 KA breaking capacity, fixed thermal and magnetic range,415 V, 50 Hz AC supply including making all connections, complete all as specified and directed . Note :- Make:Indo Asian/ Havells / Legrand
Supply and spread ribbed soil in trenches, as in cable cushioning, complete all as specified and directed. Note :- Punned thickness will be considered for payment.
Material and labour for Brick protection cover on cable with sub class 'B' brick, laid dry and flat adjacent to each other,complete all as specified and directed.
Material and labour for G.I. tubing light grade of size 40 mm bore for protection of cables to be laid under roads, crossings/culverts, complete all as specified and directed.
Material and labour for Boring of holes under road, pavement and hard standing by trenchless method by adopting horizontal boring using ultra sound technique and necessary machine including supply and insertion of HDPE pipe 150 mm dia suitable for 0.4 Mpa working pressure confirming to IS, complete all as specified and directed. Note:- Depth shall not be less than 2m below the road, pavement and hard standing without damaging the road, pavement and hardstanding.
Supply, laying and testing Insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 2 core x 10 sqmm cable, complete all as specified and directed.
Supply and fixing moulded PVC / SMC Junction boxes out door type, weather proof, of size 450 x 350 mm to be fixed above the wall and fixing SPN DB inside the Junction Box complete with suitable clamp , nut, bolt, washers and suitable glands complete all as specified and directed.
M&L Sub main wiring with PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded copper conductor cable 4 runs of 6 sqmm drawn through in and incl suitable size of PVC Conduit all accessories fixed to wall/floors along with 6 sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down existing sub main wiring description, complete all as specified and directed. Make of conduit : Avon Plast/ Supreme/ Diplast Make of Cable : Plaza/Polycab/Havells Note: 4 runs of 6 sqmm cable along with one run of 6 sqmm cable for earth conductor alongwith suitable size PVC conduit shall be measured as one length
Supply and fix Switch flame proof rotary type with termination box in LM6,16 A, single pole 250V, complete all as specified and directed.Make:- Sudhir/ Bajaj/ Baliga
Material and labour for LED Flame proof junction box in LM6 upto 1" and 1 to 4 way complete all as specified and directed. Make:- Sudhir/ Bajaj/ Baliga
Supply and fixing LED tube light fitting 1 x 16 Watts flame proof,CMRI certified recommended for gas/vapour group of IIA & IIIB,Zone 1 & 2 and IP 65 protection with die cast aluminium housing with heat resistant toughened glass with LED tube light fixtures,driver,holders,connector etc.complete with all accessories prewired and including connecting up with three core flexible copper conductor cable of suitable size all as specified and directed. Make:- Sudhir/ Bajaj/ Baliga
Material and labour for earthing complete with galvanized steel earth plate electrode 600X600X6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5M below normal ground level connected to GI earth lead wire 4.0mm dia by means of nuts, bolts, check nuts and washer of GI steel and connecting to testing point including provision of test point and all as shown in electrical plate No. 3 of SSR Pt I. The work is inclusive of necessary earth work and PCC chamber in type B-1 (1:2:4) and PCC cover 50 mm thick reinforced with 8 CTD bar both ways at 140 mm bents to centre,complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for,complete all as specified and directed.
Supply and fixing Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165, complete all as specified and directed
Supply and fixing mild steel work in framed brackets of angle or tees with web flanges cut to shape, drilled and countersunk of screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc, 10 kg each bracket, and hanging also fastening and fixing complete conforming to Gde Fe 290, Gde E-165 complete all as specified and directed.
Supply and fixing steel work in tublar truses including special shaped washer etc complete using ERW or induction butt welded tubes confirming o IS 1161-1998 grade St 240 complete all as specified and directed.
Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling old Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings,complete all as specified and directed
Supply and fixing in repairs PVC(SWR) pipe single socketed , in any length with rubber rings joints of 75 mm bore, laid in trench or in floors, complete all as specified and directed.
Supply and fixing in repairs PVC(SWR) pipe single socketed , in any length with rubber rings joints of 75 mm bore,fixed to walls complete all as specified and directed.
Supply and fixing PVC bends of approved make of (any radius) with duck’s foot or heel rest of 75 mm bore,complete all as specified and directed.
Supply and fixing PVC vent cowl 75 mm bore, complete all as specified and directed.
Supply and fixing in repair PVC floor trap 75mm dia, with grating including jointing to waste pipe fixed in solvent cement, complete all as specified and directed.
Supply & Fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube and edgeswill be painted to match with printed sheet fixed in opening as per specification & drawings complete all as specified and as directed. (Make : Rajshree,Plastiwood, Sintex or equivalent as approved)
Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tube top & bottom rail mild steel frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the mild steel frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying & fixing in the frame at site as per specification and drawing complete all as specified and directed.
Supply and fixing butt hinges size 100 extruded aluminium alloy with galvanised mild steel hinges pin anodised and fixed C-21, complete all as specified and as directed.
Supply and fixing 125mm long Extruded aluminimum alloy handles, fabricated type complete all as specified and as directed.
Supply and fixing Aluminium anodized, barrel tower bolt of extruded section, length of bolt 150 mm complete all as specified and as directed.
Supply and fixing in repair powder coated aluminium curtain rod fancy type (colour as approved) of 25mm dia including brackets, stops, rollers, etc. and fixed to wall with steel screws, complete all as specified and as directed .
Supply and fixing 18/19mm thick Pre-laminated particle board, exterior grade, prelaminated on one side with decorative choice lamination and other side balancing white lamination including fixing of teak wood beading on open edges in any position such as cup boards, drawers, shutters and all other fittings etc. fixed with screws to timber frame work complete all as specified and directed.
Supply and fixing in repair 30mm width Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, complete all as specified and directed.
Supply and fixing 150 mm long hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed.
Supply and fixing in repair 300mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate, complete all as specified and directed.
Material and labour for Roof tiles, Mangalore pattern,interlocking at side joints, laid dry including dismantling for old roofing tiles of any description, complete all as specified and directed.
Returning, filling in incl spreading, levelling, watering and well ramming in layers n'exc 25cm in soft/loose soil for sewage pipe line manholes sides and cleaning the site, complete all as specified and directed.
Removal of surplus soil to a distance n.exc 500m and at a level n.exc 1.50 m above the starting point and depositing complete all as specified and directed
Removing excavated surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point,complete all as specified and directed.
Material and labour reinforced concrete pipes 150mm bore, class NP2, laid and jointed with collars including demolition and breaking up of old drain pipes of any description and removing debris for site,complete all as specified and directed.
Material and labour for cement concrete 1:4:8 type D2 as in bed to drain pipe incl forming cradles for 150mm internal dia after the pipes are laid jointed and tested, complete all as specified and directed.
Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in hand/densi soil,complete all as specified and directed
Material and labour for 55mm thick plain cement concrete 1:2:4 type B-1, using 20mm graded crushed stone aggregates as in pathway, hardstanding etc surfaces finished even ad smooth without using extra cement, complete all as specified and directed.
Material and labour for precast cement concrete block masonry in cm (1:3:6) type C-1 using 20mm graded crushed stone aggregate with solid blocks,exc 10 cm in width and setting in mortar 1:4, complete all as specified and directed.
Removal of excavated material soils to a distance exc 250 m and not exc 500m, complete all as specified and directed.
Material and labour for Forming Contraction (Dummy) joints 55mm deep x 10mm wide, filled with sealing compound grade 'A', complete all as specified and directed.
Material and labour for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A',complete all as specified and directed..
Material and labour for 10 mm thick cement plaster in CM 1:4, on stone masonry surface finished even and smooth without using extra cement, complete all as specified and directed.
Material and labour for excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil, complete all as specified and directed.
Material and labour Reinforced cement concrete M-25 (design mix) as in Beams cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed.
Material and labour for rendering 5 mm thick in cement mortar 1:3 on external fair faces of ceiling of concrete work, surfaces finished even and smooth (without using extra cement) complete all as specified and as directed.
Material and labour for rendering 15 mm thick in cement mortar 1:4 on external fair faces of brick/concrete work surfaces finished even and smooth (without using extra cement) ,complete all as specified and directed.
Supply and fixing of PVC tiles/ sheets of 2 mm thick, laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors.complete all as specified and as directed.
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or staircase with suitable arrangement, complete all as specified and directed.
Supply and fixing Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, plates including necessary weldings/bolting etc. Fe 410 -W (Gde- E- 250) quality- A, complete all as specified and directed.
Supply and fixing for Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets incl painting, with 02 coats of synthetic enamel paint over a coat of primer, complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided. (reinforcement cement as required to facilitate demolition), complete all as specified and directed.
Excavation in post holes similar holes each not exc 0.50 Cum getting out in hard/ dense soil, returing filling in and ramming earth and broken rubble mixed with earth around in layers not exc 25 cm, watering and removing surplus spoil to a distance of not exc 50 m and making good surface, complete all as specified and directed.
Material and labour Cement Concrete 1:3:6 type C2 (using 40 mm graded crushed stone agg as in fdn of posts, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.
Supply and fixing 0.63mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip & straight flashings (length and girth as fixed) with gde of zinc coating 275, complete all as specified and directed.
Removing excavated surplus material (soil) to a distance exc 500 m but not exceeding 1.00 Km and depositing where directed at a level not exe. 1.5 m above the starting point, complete all as specified and directed. Note :- An amount of Rs 17470.00 on account of credit schedule for schedule 'A' part II shall be deducted from the total amount of BOQ to arrive at the contract sum.
M/S AMRITHESH ENTERPRISES
SREE BUILDERS
SRI MAHALAKSHMI CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .