Civil works required for ERU firing test rig behind Design Building inside HAL Factory Lucknow

Name of the Individual / Firm / Company: * Mandatory

Type of ownership Pvt. Ltd. / Proprietorship/Partnership/ Public limited/ Govt. Agencies/ Trust

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

Contact details

Intending parties having credentials as mentioned below may participate in e-tendering. The pre-qualification requirements for the works are as under :-

List of similar works executed in the past 7 years with value, schedule period of completion reasons for delay in completion if any and salient features of works, with documentary evidence of satisfactory completion.

PAN No.:

Constitution and legal status i.e. Proof of proprietary/Partnership firm or company & authorised person for receiving or signing the documents to be submitted.

Goods and Service Tax ID No.

SAC for the said work shall be 995413

Bank account details such as account no., name of account holder, name and address of the bank, IFSC code duly certified by the bank along with cancelled cheque as a document of proof shall be attached.

Registered Contractor

Average annual financial turn over during the last 3 years, ending 31st March 2025 of the previous financial year [ should not be less than 30% of Amount put to tender]

EMD of Rs.72360.00

Latest Solvency Certificate issued from Nationalized/ scheduled Bank issued and NOT before 12 months from the last date of Tender submission

Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded]

(i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost.

(ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost.

(iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

Details of person holding the power of Attorney (If different from contact person)

DECLARATION I

DECLARATION II

DECLARATION III

Description of item

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5m, including cost of all labours, materials, compaction equipments, machineries, transportation, T&P etc.as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m all kinds of soil, complete for foundations, column footing, wall foundation, manholes, post holes, trenches etc. including spreading, levelling, watering and well ramming in layers not exc. 25 cm. dewatering if required, dressing the sides, dispoal of excess surplus soil, including cost of all labours, materials, compaction equipments, machineries, transportation, T&P etc.as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge.

Supplying and filling in plinth/ foundation with white sand under floors, including watering, ramming, consolidating, dressing including cost of all labours, materials, compaction equipments, machineries, transportation, and T&P etc.as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift, including cost of all labours, materials, compaction equipments, machineries, and T&P etc.as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge.

Providing & laying PCC: 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) in foundation, column, footing, trench, appron,floor,under ground tank, post hole, platform under floors or any other similar description of works eg. drains, pipe lines bedding layers, road, chambers excluding the cost of centring and shuttering, including form work, compaction, curing, materials, labour, mechanical mixing, transportation, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge.

Providing and laying in position ready mixed or site batched design mix cement concrete for cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either redesign the mix or bear the cost of extra cement.

All works upto plinth level - Concrete of M25 grade with minimum cement content of 300 kg /cum

All works above plinth and upto floor V level -Concrete of M25 grade with minimum cement content of 300 kg /cum

Providing, fabricating, fixing and removing, form work / shuttering of side of concrete, foundation, footings, base of coloum, slab, lintel, beams side etc. for all type of RCC work in required shape and size, with true line & plumb etc. with plywood / MS plates shuttering including oiling of the top surfaces of shuttering, all supports with MS or wooden including all braces, struts, balli, working scaffoldings, ladders, wastage labour, material, T&P, transportation, etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge.

in sub-structure upto plinth beam e.g. column, footing, wall, plinth beam, water tank etc. for mass concrete

Suspended floors, roofs, landings, balconies and access platform etc

Providing & applying two coats of finishing walls with Acrylic Smooth exterior paint of required shade; New/old work (New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm of first quality of approved shade and make like apex ultima of Asian /weather coat long life of Berger / weather shield max of ICI etc including preparation of surfaces, by brooming down, removal of flakes, oil, grease marks by sand papering where required, filling holes /Cracks with birla putty / snowfilla, spreading and removing covering to doors, windows, fittings, floor, etc. to protect from splashes, removing & replacing moveable furnitures, leaving the premises clean and tidy, disposing rubbish outside in dustbins removal of all splashes and cleaning glass and joinery, use of scaffolding transportation, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before procurement of material)

Providing and laying factory made chamfered edge Cement Concrete paver blocks, 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern in footpath, approach, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, including cost of all labours, materials, transportation, loading, unloading, wastages, cartages, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before precurement of material)

Dismantling G.S. Sheet roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of including cost of all labours, materials, transportation, loading, unloading, wastages, cartages, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. all complete including cost of all labours, materials, transportation, loading, unloading, wastages, cartages, disposal of waste, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing, rendering, dubbing out cement plastering 12 mm thick with cement mortar 1: 6 (1 cement: 6 coarse sand) on wall & ceiling of rough / fair faces of brick / concerete surface including jams, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement with all labour, material, scaffolding, curing, including making contraction joints / grooves, hacking of concrete surfaces, T&P etc as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and laying Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (having crushing strength 75 Kg/cm²) work in cement mortar 1:6 ( 1 cement : 6 coarse sand) in foundation, drains, manholes, chambers, ducts, trenches, toe wall, water tank, etc or any description of similar works, including necessary cutting of bricks as required, wastages, straight or curved, work up to any height or depth, cost of scaffolding, raking out joints up to 1 cm depth as the work proceeds, cost of material, labour, T&P, curing, wastage, transportation, loading, unloading, etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and laying Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) with minimum average crushing strength 75 kg/ cm² using well burnt locally available bricks, laid straight or curved on plan not exceeding 6.00m, mean radius etc. including cost of all labours, materials, scaffolding, necessary cutting of bricks, wastage, straight or curved work, loading, unloading, transportation, curing, raking out joints up to 1 cm depth as the work proceeds, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge.

Providing & laying in position cement concrete of grade 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) of Bahratcoop/Dala/Jhansi) in floor,approach roads, description of works etc excluding the cost of centering and shuttering & including mechanical / manual mixing , wastage, compaction, curing also making contraction joints/grooves, if required with all labour, material, T&P etc all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge.

Providing and applying white cement based putty of make J&K/ Birla/ Asian / Berger or as approved by EIC, of average thickness 01 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete, including cost of all labours, materials, scaffolding, transportation, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before precurement of material)

Providing & applying two coats or more of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved make & shade such as Asian/Berger/ICI or as approved by EIC, to walls of any description at any height / depth of required shade and colour all complete to achieve even shade and colourn new/old work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre including preparation of surface by sand papering, filling holes, cracks with birla putty stopping ,removing oil/smudge marks spreading and removing coverings to doors, windows, floors, fittings to protect from splashes, removing and replacing furniture's, moveable cupboards, chicks, blinds, washing floors, cleaning glass, joinery, leaving the premises clean neat and tidy including disposing rubbish outside in dustbins, cost of all labours, materials, loading, unloading, scaffolding, wastages, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before procurement of material)

Providing and fixing ISI marked flush door shutters to door frame (MS/ Wooden) 30 mm thick phenol formaldehyde bonded, core of block board construction conforming to IS : 2202 (Part I) of make Gee doors/Kit ply/ Swastik or other approved make, non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges 125mm size with necessary screws all complete as per drawings & specification also provisions for door fittings, making holes/ cutting for fixing fittings, making good including cost of all materials, labours, T & P, cutting wastages, pattern, design, colour etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing bright finished brass handles of size 125 mm with necessary screws, including, cost of labour, materials, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing bright finished of size 250 X 10 mm brass tower bolts (barrel type) with necessary screws etc. complete including, cost of labour, materials, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. all complete, including cost of all labour, material, T&P, wastage, transporatation, loading, unloading etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary accessories, brass screws etc. to suit shutter thickness all complete, including cost of all labour, material, T&P, wastage, transporatation, loading, unloading etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and laying deformed or twisted steel reinforcement ISI mark TMT Bars of grade Fe500D or more of make RINL/SAIL/TISCON, as approved by EIC of any dia as per IS 1786 ( latest version) for all type of R.C.C works, straighting, cut to length, bend to shape required, including cranking, welding, bending spirally or hooping providing spacers / chairs and binding with mild steel wires (annealed) not less than 0.90 mm diameter or securing with clips so that placing and ramming of concrete will not displace it, including cost of all labour, material, loading & unloading, welding,T&P, wastage, transportation etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and applying of synthetic enamel paint on wall / wood/ steel surface of any description any girth at any height with first quality synthetic enamel paint of Asian / Shalimar / Berger of approved tint and shade over a coat of suitable primer for respective surface primer of above brand ,including preparing of surface by sand papering, removing oil/ smudge marks, filling, touching including labour material T&P, wastage etc all complete as per specification & direction of EIC - Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture including cost of all labours, materials, scaffolding, transportation, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before precurement of material)

Providing fabricating, erecting, Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of all labours, materials, scaffolding, transportation, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of "L" shaped mild steel shear key welded with existing reinforcement including cost of all labours, materials, scaffolding, transportation, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing precoated with Mill finished aluminium alloy roofing sheet sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including cost of all labours, materials, scaffolding, transportation, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing 15 mm dia normal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931, of approved make such as Cera/ L&K/ ARK/ Plumber or as approved by E.I.C., including the cost of all approved materials,labour, wastages,testing,T&P etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of size 300x450mm/ 300x600mm or as required at site of make Kajaria/ Johnsons/ Nitco/ Somany or as approved by EIC, in all colours, shades, in skirting, risers of steps and dados, over 12 mm (average) thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade, including cost of all labours, materials, scaffolding, curing, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before procurement of material).

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make Kajaria/ Johnsons/ Nitco/ Somany or as approved by EIC, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.. including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily , including cost of all labours, materials, scaffolding, curing, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before procurement of material).

Providing and laying tiles of shade & make Kajaria/ Johnsons/ Nitco/ Somany as approved by EIC, in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified/ Matt finished tile polished finish of size ( 600 X1200mm ) or larger or as required at site and approved by EIC including cost of all labours, materials, scaffolding and curing and T&P etc. all complete at all height as per specification of CPWD, drawing and as directed by Engineer in charge.(Note-sample is to be approved before procurement)

Providing & Fixing decorative high pressure laminated sheet 0.9- 1.0mm thick of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality and make Fevicol/ Pidilite etc as approved by EIC including cost of all materials, labours, T & P, making provisions for harware fittings, etc as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing White Vitreous China Flat back Wash basin size 630 x 450 or as per site requirement or approved by EIC as approved shape and make viz. Parryware / Hindware / Cera as approved by EIC, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls where require including the cost of all approved materials, labour, wastages ,testing, T&P at all height etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) of size 550X400X380 mm/ 530X400X380mm / 515X360X405mm or as per site requirement or approved by EIC of make Cera/ Plumber/ Parryware/ Hindware as approved by EIC with seat and lid, 10 litre low level P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid including the cost of all approved materials , labour, wastages, testing, T&P at all heights etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively of make Parryware / Hindware / Cera as approved by EIC, one urinal basin with with 5 litre white P.V.C. automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required including the cost of all approved materials,labour, wastages,testing, T&Petc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before procurement of material).

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, make Supreme/ Astral/ Finolex as approved by EIC including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including Concealed work, including cutting chases and making good the walls, painting etc testing of joints, including the cost of all approved materials, labour, wastages, T&P etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

20 mm nominal dia Pipes

25 mm nominal dia Pipes

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms; 15 mm nominal bore of approved make such as Cera/ L&K/ ARK/ Plumber as approved by E.I.C.,including the cost of all approved materials, labour, wastages, T&P etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars, including the cost of all approved materials, labour, wastages, disposal, T&P etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete, including the cost of all approved materials, labour, wastages, T&P etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing 15 mm dia nominal bore C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 including the cost of all approved materials, labour, wastages, T&P etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make including the cost of all approved materials, labour, wastages, T&P etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing PTMT / CP grating of approved quality with plain frame and jali set, 100mm nominal diameter square/ round grating with/ without waste hole including all labour, cutting, fixing, making good, sealing joints with all material , tool and plant, wastage etc including the cost of all approved materials,labour, wastages,testing,T&P etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing powder coated Aluminium (minimum thickness of powder coating min. 60 micron ) work for shutters of doors, windows & ventilators including hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions i.e. at top, bottom and sides, Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required thickness of aluminium section shall be 1.5 - 2.00mm including cleat angle, Aluminium snap beading for glazing / paneling C.P. brass / SS stainless steel screws, including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead, cost of all labour, material, T&P, wastage, transporatation, loading, unloading etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge. (Note: Glazing, paneling and dash fasteners to be paid for separately)

Providing and fixing glazing in Aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawing and the directions of engineer-in-charge (Cost of Aluminium snap beading shall be paid in basic item) with float glass panes of 5.0 mm avg thickness of make Saint Gobain/Modigaurd or as approved by EIC.(weight not less than 12.50 kg / sqm) including cutting straight or curved as per site requirement, rounding off edges jointing with steel screws as per architectural drawings and including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead, cost of all labour, material, T&P, wastage, transporatation, loading, unloading, etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge.

Providing and fixing beveled edge mirror of superior glass (of approved quality) complete with 06 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete of size 600x450 mm or as per site requirement with plastic/ wooden moulded frame as directed by EIC including the cost of all approved materials,labour, wastages,testing, T&Petc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing CP towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. approved quality and colour including the cost of all approved materials,labour, wastages,testing, T&Petc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing on wall face unplasticised rigid PVC rain water pipes single socketed pipes(75mm dia) of make Supreme/Astral/Finolex or as approved by EIC, conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, cost of all labours, materials, transportation, loading, unloading, wastages, cartages, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing on wall face unplasticised rigid PVC rain water pipes single socketed pipes(110mm dia) of make Supreme/Astral/Finolex or as approved by EIC, conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, including cost of all labours, materials, transportation, loading, unloading, wastages, cartages, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes 75mm bend conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, cost of all labours, materials, transportation, loading, unloading, wastages, cartages, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes 110mm bend conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, cost of all labours, materials, transportation, loading, unloading, wastages, cartages, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and making connection of drain or sewer line with existing manhole for pipes 100 to 250 mm diameter including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), cement plastered on both sides (inside or outside surface) with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement, curing, cleaning and finishing the surface properly and making necessary channels for the drain etc. including all material, labour, T&P, scaffolding, wastage etc. required for proper completion of work all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing P.V.C. flexible waste pipe for sink or wash basin including P.V.C. waste fittings all complete, including all material, labour, T&P, scaffolding, wastage etc. required for proper completion of work all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing 15mm nominal bore uplasticised 45 cm long PVC connection pipe with brass unions etc including the cost of all approved materials,labour, wastages,testing,T&P etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing 8 mm dia C.P. / S.S. Health faucet /Jet with flexible tube upto 1 to 1.25 metre long with S.S. triangular plate to Eureopean type W.C. of suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete of standard size & make L&K, Hindware, Jaguar, essess, Prayag, Cera as approved by EIC, to be fitted to concealed water supply line including the cost of all approved materials,labour, wastages, T&P etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing fabricating, erecting Steel work hot finished welded type tubes in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete including the cost of all approved materials,labour, wastages, T&P etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and laying matt finished vitrified tile of size 100x100x16mm/ 300x300x20mm thick or 600x600x20mm thick or larger or as per site requirement as directed by EIC (thickness as per manufacturer) having water absorption less than 0.5% and conforming to IS: 15622 of approved make Kajaria/ Johnsons/ Nitco/ Somany or as approved by EIC in all colours and shades in out door floors such as cooridors / footpath, court yard multi models etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete (Note-sample is to be approved before procurement)

Total (A)

Above