82673 REPAIRS TO ALUMINIUM JOINERY, B/R WORKS TO CERTAIN BUILDINGS IN MD AND OTM ACCN OF ZONE B AREA UNDER AGE(I) NAVY CHENNAI

Amount

SCHEDULE 'A' (B/R WORK)

Taking down chowkhats with shutters (without taking off shutters from the frame) not exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4.0 sqm each complete all as specified and directed.

Taking down Shutters of any description exc 1 sqm but not exc 2 Sqm each complete all as specified and directed.

Taking down Shutters of any description n. exc 1 sqm Sqm each complete all as specified and directed.

Taking down and refixing the same opening of door Shutters of any description exc 1 sqm but not exc 2 Sqm each and including easing and adjusting before fixing of door shutter complete all as specified and directed.

Taking down and refixing the same opening of door Shutters of any description not exc 1 sqm but each and including easing and adjusting before fixing of door shutter complete all as specified and directed.

Demolition of Brickwork built in cement motar, stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed.

Material and Labour for Brickwork with flyash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

Supply and fix for Aluminium powder coated frame windows and partetions less than 2.00kg/RM and including aluminium sliding door track channel, including all shutters not less than0.55 kg/RM including joining cleat for fixing EPDM rubber/ neoprene gasket required with extruded built up standard sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary rollers, angles, and filling up the gaps at junctions, i.e. at top, bottom and sides etc. complete all as specified and directed.Note : Thickness of powder coating not less than 50 micron.

Supply and fix for Aluminum powder coated frame with doors shutters, with one or more rebates, Aluminum Partitions sides and middle sections , Aluminum powder coated sliding three track windows of frame with shutters and Fixed types Aluminum ventilators with louvers including fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.complete all as specified and directed. Note : Thickness of powder coating not less than 50 micron.

Supply and fix for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in- charge. complete all as specified and directed.

Supply and fix for Stainless steel wire cloth. 0.36mm nomonal dia of wire and 1.40mm average width of aperture and fixed with aluminium wire staples complete all as specified and directed.

All as per item No- 13 above but fixed in repair to aluminium fixed / sliding windows, aluminium ventilators, wooden wire mesh doors, PVC wire mesh doors including teak wood beading for wooden doors etc etc complete all as specified and directed.

Supply and fix for 3 mm thick sheet glass figured glass, pin head ,obscured or frosted, including teak wood beading for wooden glazing windows in square not exc 0.50 Sqm in each pane complete all as specified and directed.

Supply and fix for 3 mm thick sheet glass figured glass, pin head ,obscured or frosted, including teak wood beading for wooden glazing windows in square not exc 0.50 Sqm in each pane including hacking out old broken glass complete all as specified and directed.

Supply and fix for plain sheet glass,3 mm thick, ordinary quality and glazing and fixed including teak wood beading for wooden glazing windows in square not exceeding 0.5sqm in each complete all as specified and as directed

All as per item No-17 above but including Hacking out old broken glass and provide wdn teak wood beading around glass portion etc complete all as specified and directed.

Supply and fix for plain sheet glass,3 mm thick, ordinary quality and glazing and fixed including teak wood beading for wooden glazing windows in square not exceeding 0.5sqm in each etc including hacking out old broken glass all as specified and directed.

Supply and fix for plain sheet glass,4 mm thick, ordinary quality and glazing alu windows and fixed with aluminium glazing clips exceeding 0.5sqm in each complete all as specified and as directed

Supply and fix for plain sheet glass,4 mm thick, ordinary quality and glazing aluminum fixed /sliding windows and fixed with aluminium glazing clips exceeding 0.5sqm in each including hacking out old broken glass all as specified and directed.

Supply and fix for plain sheet glass, ,5.5mm thick, ordinary quality and glazing doors and fixed with aluminium glazing clips in square exceeding 0.5sqm in each complete all as specified and as directed

Supply and fix for plain sheet glass, ,5.5mm thick, ordinary quality and glazing doors and fixed with aluminium glazing clips in square exceeding 0.5sqm in each including hacking out old broken glass all as specified and directed.

M&L for 6mm thick bakilight hard sheet decorative grade 1 (with BWR resin) with decorative face veneers on one side and other side white; and fixed to doors and Partitions etc and fixed with aluminium glazing clips etc complete all as specified and as directed

All as per item No- 24 above but fixed in repair to aluminium Partitions and Aluminium doors etc complete all as specified and directed.

M&L for 9 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work and aluminium Partetions and Aluminium doors including fixed in repair complete all as specified and as directed

Supply and fix for 2nd class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified.

Supply and fix for 35 mm thick 2nd class Hard wood rail and style of Plain framed, panelled shutter panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified.

Supply and fix for 32mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.

Supply and fix for 35 mm thick 2nd class hardwood factory made Glazed and skeleton fully and partially door shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), any numbers edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats complete all as specified.

Supply and fix for for Factory made fully glazed i.e glass panes used instead of 5mm thick sheet panels PVC of Louvred Ventiator of 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colourmicron.complete all as specified and directed

Supply and fix in repair for aluminium powder coated tubular fancy type curtain rail/ drapery rod with and including two nos of bracket/holders suitable for drapery 28mm dia rods of one window / door openings etc complete all as specified and as directed.

Supply and fix for solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawingcomplete all as specified and directed

Supply and fix for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed

Supply and fix for 75mm size, SS Butt hinges heavy duty, , and fixed complete all as specified and directed

All as per item No 35 above but for fixed in repair complete all as specified and directed

Supply and fix for 125mm size, SS Butt hinges heavy duty, , and fixed complete all as specified and directed

All as per item No 37 above but for fixed in repair complete all as specified and directed

Supply and fix aluminium handles cast type anodised for 100 mm complete all as specified and directed

all as per item No 39 above but for fixed in repair complete all as specified and directed

Supply and fix aluminium handles cast type anodised for 150 mm complete all as specified and directed

All as per item No 41 above but fixed in repair complete all as specified and directed

Supply and fix for aluminium, anodised barrel tower bolts of extruded section and fixed for 150 mm length complete all as specified and directed

All as per item No 43 above but for fixed in repair complete all as specified and directed

Supply and fix for aluminium, anodised barrel tower bolts of extruded section and fixed for 200 mm length complete all as specified and directed

All as per item No 45 above but for fixed in repair complete all as specified and directed

Supply and fix for Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed of length of bolt 300mm complete all as specified and directed

All as per item No 47 Above but for fixed in repair complete all as specified and directed

M&L for 2nd class HW Plain fillets. square, rectangular or triangular in section exc 13 but n exc 25 Sq.cm, bullnosed, splayed, chamfered or rounded on one edge or face fixed with nails and screws etc complete all as specified and as directed.

M&L for 25mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination and 6mm thick 1st class teak wood beading around the shutters and any other balance portion 1mm thick decorative tape fixed with favicol, fixed with screws to timber frame work for shelfs etc including fixed in repair complete all as specified and as directed.

All as per Item No 50 above but for 12mm thick complete all as specified and directed

S & F for 30 mm Width of flaps (when open) Continuous (piano) hinges, brass, bright finish or electrogalvanised complete all as specified and directed

Supply and fix for 75mm size,Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed

Supply and fix for Hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws for 150 mm size complete all as specified and as directed.

Supply and fix for Brass handles, cast type, polished bright handles 75mm long fixed to plywood or frame complete all as specified and directed

Supply and fix for Ball catches/ magnetic and connected plate fixed to shutter and frame as per sample complete all as specified and directed

Material and Labour for 15mm thick Rendering on fair faces of brick work or concrete surfaces in CM (1:4) using with WPC @ 3% by wt of cement complete all as specified and directed. ( Note : WPC shall be measured and paid separately)

Supply only Integral water proofing compound complete all as specified.

Material and Labour for Preparation of new surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. all as per manufacturer instruction and including necessary scaffoldings upto G+4 etc etc complete all as specified and directed.

S&F in repairs Door closer hydraulically of Aluminium (extruded section body) regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed

Material and Labour for 12-15 mm thick of any shade (table rubbed and polished) laid and jointed in flooring strips, step type window cills and jambs etc of green Marble over and including 15mm thick screed bed/ backing coat in CM 1:6 complete all as specified and directed

Material and Labour for Preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of Synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of old steel surfaces and applying one coat of aluminium paint etc complete all as specified nd directed.

S&F in repairs 150mm long Floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed

kvs constructions (BID ID -3361600)