Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.7 LAccepted-Finance | L1 | Accepted-Finance Lowest and reasonable bid | |
| 2 | L2₹19.0 L+₹27,146 (1.45%)Rejected-Finance 239 PHASE 2 MODEL TOWN BATHINDA BATHINDA PUNJAB 151001 | BATHINDA | PUNJAB | 151001 | L2 | Rejected-Finance Other than the lowest bid | |
| 3 | L3₹19.8 L+₹1.1 L (5.86%)Rejected-Finance 129 PANCH SHEEL VENUE DEEP NAGAR JALANDHAR CANTT PB | L3 | Rejected-Finance Other than the lowest bid |
Tender Value
₹23 L
EMD Value
₹46,000
Closing Date
12 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST JALANDHAR CANTT
Kabir Road Jalandhar Cantt.
CERTAIN REPAIR TO OTM AND ALLIED AREAS PERTAINS TO B-3 AREA OF AGE B/R-II UNDER GE (WEST) JALANDHAR CANTT
2024_MES_666380_1
GE/JAL(W)-37/2024-25
Open Tender
Civil Works
Item Rate
270 days
JALANDHAR CANTT
Class E Category a(i) for contractors enlisted with MES
8 documents required · 8 mandatory
₹500
GE WEST JALANDHAR CANTT
₹46,000
Yes
27 Sept 2024
18 Jul 2024
17 Sept 2024
18 Jul 2024
12 Sept 2024
31 Jul 2024
Amount
M&L preparation of old decorated surface of wall and applying one coat of cement base paint (upto 3 storey bldg) complete all as specified and as directed by Engineer-in-Charge.
M&L preparation of old decorated surface of wall and applying one coat of white wash complete all as specified and as directed by Engineer-in-Charge.
M&L preparation of old decorated surface of ceiling and applying one coat of white wash complete all as specified and as directed by Engineer-in-Charge.
M&L preparation of old decorated surface of wall and applying one coat of colour wash complete all as specified and as directed by Engineer-in-Charge.
M&L preparation of old decorated surface of wall and applying one coat of oil emulsion distemper complete all as specified and as directed by Engineer-in-Charge.
Complete removal of existing treatment on wall and applying Two coat of oil emulsion distemper (white) on one coat of putty filling on walls etc (Surface finished even and smooth) complete all as specified and as directed by Engineer-in-Charge.
M&L preparation of old decorated surface of wall and applying Two coat of oil emulsion distemper (white) complete all as specified and as directed by Engineer-in-Charge.
M & L for Preparation of old steel surface of any description over 10 CM width or girth and applying one coat of synthetic enamel paint complete all as specified
M & L for Preparation of old wood and wood based surfaces of any description over 10CM width or girth and applying one coat of synthetic enamel paint complete all as specified.
Removing existing paint by scrapping with Asian Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) having RPM between 600-1500, sanding paper of 60/80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and as directed by Engineer-in-Charge.
Providing and applying white cement based putty @ 1.0 Kg (undiluted) per sq mtr. of average thickness 1 mm, of Asian Paints or its equivalent over the plastered/ old painted wall after scrapping to prepare the surface even and smooth complete. Step 1 : Mix the putty powder by adding 40-50% water and mix it with Asian Paints Trucare Putty mixer (Trucare Putty mixer with min 1400 W power havinng mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute) or equivalent Step 2 : Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application of Asian Paints Trucare Graco Spray Machine (Model: EH 230 DI) or equivalant having a DC electric motor of 3.3 KW having flow speed of 6 ltrs per minutes with a maximum pressure 227 bar having maximum tip size 0.039" Step 3: Allow 6-8 hrs time to dry the putty surface. Step 4: Apply second coat of the prepared mixer manually to make to smooth to make the finish even. Step 5: Allow 6-8 hrs time to dry the putty surface complete all as specified and as directed by Engineer-in-Charge.
Sanding of the putty surface with Asian Paints TruCare Wall Sander: L- 01/H-01 or equivalent (having mechanical vacuum mechanism) having RPM between 600-1500, sannding paper of 180 Grit having dia of 7"/9" to make the surface free from dust etc. by skilled labour complete all as specified and directed.
Providing and applying two coats of premium acrylic smooth exterior paint with silicone additives of required shade(two or more coats applied @ 1.43 kgs /10 sqm over and incl priming coat of exterior primer applied @ 2.20Kg/ diluted with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalant having an electric motor of min. 1 HP with a flow speed of min 2 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and as directed by Engineer-in-Charge.
Providing and applying two coats of acrylic washable distemper @ 1.5 kgs /10 sq mtrs diluted with water in 5:3 ratio applied over primimg coat @ 0.8 ltr (undiluted)/10SQM diluted with water in 1:1 ratio with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalant having an electric motor of min.1 HP with a flow speed of min 2 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and as directed by Engineer-in-Charge.
Taking down cement plaster on brick wall upto any height(max of triple storey) including raking out joints hacking for key srcubbing down with water complete all as specified and as directed
M&L15mm thick rendering in cement mortar 1:6 on fair faces of brick work surace rendering is to be even and smooth with out using extra cenent complete all as specified and directed
M&L15mm thick rendering in cement mortar 1:4 on fair faces of brick work surace rendering is to be even and smooth with out using extra cement (upto 3 storey bldg) complete all as specified and directed
M&L 5 mm thick cement plaster in cement mortar 1:3 on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.
Grubbing up bushes or tree trunk of grith n exc 10cm including taking/digging out roots and making good disturbed portion of wall with PCC 1:3:6 type C-1 and removing of unserviceable material to a distance n exc 50 m and clearing site complete all as specified and directed.
M & L for Preparation of old stone/concrete surface of any description over 10 CM width or girth and applying one coat of synthetic enamel paint (in alternate colours if required as per site) complete all as specified
M&L for Preparation new surface of wall and applying two coat of oil emulsion distemper over a coat of wall putty complete all as specified and directed.
M&L for Preparation new surface of wall and applying two coat of cement base paint over a coat of primer complete all as specified and directed.
M&L for three coats of white wash on newly plastered surfaces of celling including prepration of surfaces complete all as specified and directed.
M&L for writing letters and figures (Block romon italic or indian) n exc 30 cm high complete one set at one place with synthetic enamel paint complete all as specified and directed.
Dismantling of wall and ceiling board in any thickness including cover fillets
S&F 4mm thick of size 600x600mm HSPC (high pressure steam cured) pre-primetred self embossed textured designer E-clasic board to be fixed to GI powder coated grid/section size 600x600with main runnder 38mm x 24mm x 0.9mm and wall angle 19mm x 0.9mm and duly suspended with 4mm dian GI bar hangers @1200mm centre to centre bothways fixed with steel dash fasteners or from purling/roof with alignment clip incl providing provn for light fixtures of any size complete
S&F false ceiling at all heights with GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of size 595x595 mm of approved texture, design and pattern having moisture content not less than 2% humidity resistance of 99%. NRC 0.50 to 0.75 as per IS 8225 :1987, non-combustible as per BS 476 (Part-4)- 1970 and light refletance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanised @ 120 grams per Sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000mm, cross- T size from 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600 mm to form grid module of 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per Sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasterners, 6 mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles. The work shall be carried out as per specifications, drawing and as per directionss of the Engr-in-Charge
Supply and fixing solid PVC wall lining/ panelling consisting of 5mm thick single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame and plugging to brick wall with 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specifications and drawing including necessary cutting for electrical fittings as per site requirment complete all as specified and as directed.
Dismantling of brick tiles single layer as in roof covering complete all as specified
Demolition of mud in roofs any thickness including plastering and leeping(whether full thickness removed or only a part thereof) all as specified.
Roughning for old concrete surface/floor by picking, weeping clean and washing with down with water to remove dust including brushing neat cement slurry with 3.00 Kg of cement per sqmetc.
M&L for PCC 1:2:4 type B-1 as roof padding concrete to bring the extg slab in slope of 1:40 complete all as specified
M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20kg per sqm incl cleaning surfaces complete all as specified
M&L for fixing APP based polymeric membrane minimum weighing 3.60 kg/sqm and min 3mm thick reinfirced with polyster noin wove faric (wt not less than 150gms/sqm) land on primed surface by forced application
M&L 40mm thick brick tiles laid cement mortar bed 1:6 , 15 mm thick and joints grouted flush mortar 1:3 mixed with 5% crude oil by weight of cement complete all as specified and directed.
M&L 40mm thick brick tiles laid cement mortar bed 1:6 , 15 mm thick and joints grouted flush mortar 1:3 mixed with 5% crude oil by weight of cement but except tile complete all as specified and directed.
M&L Flush pointing in cement mortar 1:3 on brick tiles laid flat complete all as specified.
M&L PCC 1:2:4 Type B1 (using 20 mm graded aggregate as ) as in roof curves, mud stops rounded or chamfered on edge complete all as specified and directed.
Dismantling floor hearth wall tiling (but not backing) removing servicable tiles to store rubbish off the premisses complete all as specified and directed
M&L 15mm thick screed bed or bedding layer of cement mortar 1:6 laying floor finish
M&L non skid ceramic colour tiles 7 to 8 mm thick joint free edge cut (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm(400mmx400mmx7 mm thick) set and jointed in neat cement slurry and pointed in colour cement to match as in floor complete all as specified and as directed
All as per ser item No 41 above but in skirting and dado including rendering/screeding including cement mortar1:4 , 10mm thick
M&L vitrified ceramic tiles minimum 8 mm thick (square/rectangular)polished area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in colour cement to match complete all as specified and directed
All as per ser item No 43 above but in skirting and dado including rendering/ screeding including cement mortar 1:4 , 10mm thick
M&L glazed ceramic colour tiles 350mmx250mmx7mm / 450mmx350mmx7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado over cement mortar rendering/screding 10mm thick 1:4 complete all as specified and as directed
M&L for 20mm thick granite black slab, machine cut, well polished, bedded in 15mm thick in CM 1:4 as in cooking platforms & like and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixtures of pigments to match the shade of granite stone including cutting and polishing etc. complete all as specified and directed.
Demolition of brick built in cm including all quoins arches pillars etc.
M & L brick work with sub class 'B' bricks in CM 1:6, straight or curved on plan exc 6 mtr nean radius, using old size bricks.
All as per Srl item No. 48.00 above but except bricks.
M&L for repairing of RCC projection of chhajjas, roof, facia etc at any height upto triple storey by demolition of damaged portion including scraping, cutting, cleaning exposed reinforcement and providing cement concrete (1:1.5:3) type A-1 using 12.5mm graded crushed stone aggregates and reinforced with welded mesh weighing 2 to 3 kg per Sqm as per requirement and finishing the surfaces even and smooth with cement and sand mortar (1:3), 5 mm thick, the thickness of projection to be repaired shall be 70mm to 80mm including necessary formwork and finishing the surfaces to match with the existing complete all as specified and as directed by Engr-in-Charge. (Note: Welded Mesh to paid separately) (The rate quoted by the contractor shall be included for scaffolding etc) (EIC shall ensure to get the complete work executed against this term before submission of completion)
Taking up or down existing steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as dircted for 15 mm dia bore
Taking up or down existing steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as dircted for 20 mm dia bore
S&F 15mm dia bore GI tubing, jointing and testing galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings, the rate also included for cutting through walls floors etc.
S&F 20mm dia bore GI tubing, jointing and testing galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings, the rate also included for cutting through walls floors etc.
Refixing only 15mm dia bore GI tubing, jointing and testing galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings, the rate also included for cutting through walls floors etc.
Refixing only 20mm dia bore GI tubing, jointing and testing galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings, the rate also included for cutting through walls floors etc.
Cutting chases, pinning in, making good to facing where reqd and pointing in CM 1:3 to ends of edges of landing etc and cutting chases for concealed water tubing and making good cutting exc 10 cm but n.exc 20 cm girth.
S&F in repairs 15mm dia bore stop cock concealed type cast copper alloy chromium plated fancy type with long shank & cup complete all as specified and as directed.
S&F in repairs fancy type chromium plated cast copper alloy bib taps long shank & cup 15mm dia bore complete all as specified and as directed
S&F in repairs 15mm dia bore stop cock /Angle valves cast copper alloy chromium plated fancy type with long shank & cup complete all as specified and as directed.
S&F in repairs 15mm dia bore Angle valves two way cast copper alloy chromium plated fancy type with long shank & cup complete all as specified and as directed.
S&F in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed
S&F in repairs vitreous china wash down water closet (Pedastal pattern) 'white (excluding flushing cistern and flush pipe ) including connection to drain or out going pipe and to flushing pipe anti syphonage pipe and making good to floor complete all as specified and as directed
S & F in repairs brass chromium plated jet/health faucet for pedestal pattern water closet including PVC flexible pipe alongwith complete necessary fittings all as specified and directed by the Engr- in- Charge.
Supply & fix water closet seat cover, white closed pattern with flat bottm & cover for EWC complete all as specified and as directed
S&F in repair vitreous china wash hand basin (pedastal pattern) white flat back, size 550mmx400mm fixed on and including cast iron cantilever brackets 32mm dia brass waste coupling and including fixing of tap waste fitting and union complete all as specified and as directed . Note: pillar tap shall be measured as supply only under respective items
S&F in repair vitreous china wash hand basin oval type white size not less than 550mmx400mm fixed on and including cast iron cantilever brackets 32mm dia brass waste coupling and including fixing of tap waste fitting and union complete all as specified and as directed . Note: pillar tap shall be measured as supply only under respective items
S&F Central Hole Basin Mixer with Regular Spout with Popup Waste System with 450 mm Long Braided Holes all as specified and directed
S&F wall Mixer Non-Telephonic Shower Arrangement with Connecting Legs & Wall Flanges all as specified and directed
S&F in repair PVC connection 15mm dia and 450mm long with both ends brass fly nut complete all as specified and as directed.
S&F in repair 15mm dia bore pillar tap cast copper alloy, wih capstan heads, chromium plated , screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shank and flynust, screwed for iron pipe and fixed complete all as specified and as directed
S&F in replacement 32mm dia PVC waste pipe for WHB complete all as specified and as directed.
S&F in repair brass chromium plated tubler towel rail 20mm dia D type, 60cm long between flanges complete all as specified and as dirceted
S&F in repairs stainless steel toilet paper holder with gutties and steel screws on walls as directed and approved complete all as specfied
S&F stainless steel soap dish complete all as specified
S&F 4mm thick superior quality straight shelve , made of transparent toughened glass, size 60cm long complete all as specified and as directed.
Taking chowkhat or frame with shutters (with out taking off the shutter from the frame ) n. exc 1.5 Sqm each complete all as specified and as directed.
All as per ser item No 78 above but exc 1.5 sqm but exc 4 Sqm each
Taking down shutter refixing after easing, adjusting area exc 1 Sqm but not exc 2 sqm each complete all as specified.
Taking down shutter area exc 1 Sqm but not exc 2 sqm each complete all as specified.
S&F PVC solid door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinfoced with MS square tube, suppling and fixing in opening as per specification and drawing.
S & F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed ® size 125x 60 mm
S&F pressed steel door frame with one or more rebate including necessary fixing lugs, hinges, lock stricking plate of size 105 x60mm
S&F factory made solid panel pvc door shutter 30mm thick (style) consisiting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & drawing.
S&F 2nd class hardwood factory made Plain framed panelled shutter 35mm (two planel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of the rail and stile as per IS:1003(Part I), kiln sseasoned and chemically pressure treated 35mm thick.
S&F 2nd class hardwood locally glazed and skelton shutters 35mm thick open rebated and prepared to receive glass,gauge etc (without sash bars) edging of framing plain, chamfered or rounded with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I, Section 8, Clause 8.24(a).
S&F factory made steel window 1.25mm thick box type ERW hollow P section of size 60mm x25mm single rebated comprise of gauged skelton shutter ERW size 50mmx20mm and 1.25 mm thick with two openable leaf consisting two Nos sash bars of T- section 20mmx3mm welded to frame with one vertical mullion of ERW box type T- section of size 60mmx25mm and 1.25 mm thick including cutting holes and making good dismantled portion with PCC (1:2:4) type B-1 (four Nos for each window)including following fittings weled to frmae shutter:- (a) Hold fast 150mm long of 12mm x3mm made to shape -04 Nos per window. (b)Handle of z section 20mmx25mm, 100mm long - 01 Nos per leaf. (c) MS Tower bolt 150mm long -02Nos per leaf. (d) Z-section 20mmx25mm 100mm long 01 Nos per leaf.(e) MS pintol hinges of size 75mmx12mm-02 Nos per leaf. Note :(i) Fabrication & fixing shall be as per drg No CEJZ/TD-06/07 (ii) Wire mess and painting shall be measured and paid separatly under respective items.
All as per item No 88 and above but window with glazed shutter. Note :(i) Fabrication & fixing shall be as per drg No CEJZ/TD-06/07 (ii) Glass panes and painting shall be measured and paid separatly under respective items.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified.
S&F galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete fixed with tinned tacks or galvanised wire staples all as specified and as directed
S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing of Fe-410w(Gde-E-250) quality A complete.
S&F aluminum frame powder coated for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified and directed.
S&F any colour, aluminum door shutters powder coated , aluminium section weighing not less than 1.0 Kg/ RM including necessary jointing cleats, glazing clips, neoprene packing, handles 02 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed.
S&F any colour, aluminum window and ventilator shutters, powder coated side hung type with sash bars, aluminium section weighing not less than 0.55 Kg/ RM including necessary jointing cleats, glazing clips, ruber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.
S&F anodised aluminium grills (anodised transparent or dyed to required shade according to IS:1868 with anodic coating grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/ stainless steel screws @ 200mm centre to centre, including cuttung the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all as per requirement and direction of Engineer-in-Charge.
S&FAluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed
Supply & fix sheet glass ordinary quality 3mm thick n, exc 0.5 sqm in each pane
Supply & fix tinted glass ordinary quality 5.5mm thick n, exc 0.5 sqm in each pane
S&F 100mm butt hinges, stainless steel medium weight cold roled and fixed
S & F 150 mm aluminium handles, cast type anodised
S&F 140 mm floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor.
S&F aluminium anodised barrel tower bolt of extruded section of 200mm size
S&F 300 mm long aluminium alloy, anodized sliding door with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified.
S&F in replacement aluminium (die cast body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 Kg complete all as specified as directed.
Preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint
Preparation of new steel surface of any description over 10 CM width or girth and applying two coats of synthetic enamel paint complete all as specified
Dismantling Timber scantling 40 sqcm or over in section in any description complete all as specified.
S&F Rolled mild steel section as in joist, chanel, angle, or tee section fixed independently without connecting plates, etc (cut to ordinary length i,e within 20mm of the length indicated) of Fe-410w(Gde-E-250) quality A complete all as specified an directed
S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting platesf Fe-410w(Gde-E-250) quality A complete all as specified an directed
M&L for cement concrete 1:3:6 Type C-2 as in foundations filling and mass concrete all as specified and directed.
Dismantling plain corrugated asbestos /translucent sheet in roof covering incl ridges.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa and finishing with resin coat on both surfaces @ 150 gm/sqm of coating as in roof covering /cladding to wall fixed with self tapping screws as specified
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified
S&F 6mm thick asbestos cement corrugated or semi corrugated sheet in roofs fixed with L type or J type hook bolts complete all as spd.
Demolition and breaking up drain pipes 100 mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as spd.
S & F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floors complete all as specified.
S & F 110 mm PVC (SWR) bends any radius provided with access door.
Demolition and breaking up drain pipes 75 mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as spd.
S & F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in floors complete.
S & F 75 mm PVC (SWR) bends/tee any radius provided with all accessories complete.
Demolition of cement Concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) or as in sunken complete.
M&L PCC 1:3:6, type C-2, 50mm thick as in plinth protection, Surface finished fair and smooth without using extra cement.
S&F 500 Ltr capacity rotational moulded polyethylen water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including 20 mm ball float valve PTM and dismantling of tank complete all as specified and as directed by the Engineer-In- Charge.
All as per ser item No 124 above but 1000 ltr capacity complete all as specified and as directed
Taking down top assembly (except curtain and side bracket) of rolling shutter of area exc. 5 Sqm but not exc. 10 Sqm each, push pull or manual type and re-fixing the same in same position after necessary repairs such as cleaning, oiling, greasing, replacement of rusted nuts and bolts, including welding / grinding as require for proper and smooth function including necessary oiling / greasing, welding, etc after cleaning of the both side guided channels etc. complete all as directed by Engineer - in - Charge.
Taking down top assembly (except curtain and side bracket) of rolling shutter of area exc. 10 Sqm but not exc. 20 Sqm each, push pull or manual type and re-fixing the same in same position after necessary repairs such as cleaning, oiling, greasing, replacement of rusted nuts and bolts, including welding / grinding as require for proper and smooth function including necessary oiling / greasing, welding, etc after cleaning of the both side guided channels etc. complete all as directed by Engineer - in - Charge.
Supply only steel ball bearing suitable for rolling shutter for smooth functioning of rolling shutter of any size or type all as specified and as directed by Engineer - in - Charge.
Supply only Hot rolled mild steel round pipe any dia / existing size as in suspension shaft for rolling shutter for smooth functioning, cut to size including necessary drilling / grinding etc complete
Supply only Mild steel spring suitable for rolling shutter of existing size for smooth functioning, all as specified and directed.
S & F in repair for safety lever locks mild steel with 4 levers for rolling shutters complete all as spd and directed.
SARASWATI CONSTRUCTION CO (BID ID -3087398)
NATIONAL BUILDERS (BID ID -3091149)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .