Complete Electrical rewiring of Manoranjan Kendra, Transit hostel and Dispensary of Kailashnagar Colony , Mungoli Sub Area under MISSION SEHAT.

Amount

The bidder to quote rates excluding GST and including PF. The bidders may note this while bidding for this tender.

1-9-16 Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FR grade copper wire, flush type switch, earthing and required accessories as per specification No: WG-PW/SW (Material +Labour)

1-9-18 Point wiring for independent plug in PVC trunking (casingcapping) with 1.5 sq.mm (2+1E) FR grade copper wire with flush type switch and required accessories as per specification No: WG-PW/SW (Material +Labour)

1-7-2 Supplying and erecting One/Two way piano type switch 6A./bell push erected on filled polypropylene board or double polished wooden board/ folded or screwed board with top of either wooden/ 3 mm thick hylam sheet/ 4mm thick plywood pasted with 1.5 mm thick laminate with S M screws and duly connected.(Material +Labour)

1-3-3 Supplying & erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/BW (Material +Labour)

2-13-9 Supplying and erecting electronic type step regulator for ceiling fan 600/ 900/ 1200/ 1400 mm. sweep, complete erected on provided switch board. (Material +Labour)

1-2-10 Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25 mm with accessories on wall/ceiling as per specification No: WG-MA/CON. (Material +Labour)

2-10-14 Supplying & erecting ready to use Retrofit T8 LED 18 / 20 tube light with polycarbonate body, heat sink, integrated HF electronic driver complete & compatible to T8 / T12 LED luminaire by disconnecting starter & ballast if necessary. (Material +Labour)

5-3-2 Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB (Material +Labour)

5-6-1 Providing, erecting and commissioning 2 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 16/ 25A complete as per specification no. SWRCCB/ RCCB. (Material +Labour)

5-2-4 Supplying and erecting metal clad distribution board 240V, 6 way,16A per way & neutral bar connector complete erected on iron /GI frame as per specification no. SW-SWR/MDB(Material +Labour)

1-7-3 Supplying and erecting shockproof T. switch 16 A porcelain base surface mounting type / flush mounting type erected on filled polypropylene board or polished thick varnished double wooden block/folded or screwed board with top of either wooden/ 3 mm thick hylam sheet/ 4mm thick plywood pasted with1.5 mm thick Laminate with S M screws and duly connected. (Material +Labour)

1-7-6 Supplying and erecting shockproof 3 pin plug socket 16A with porcelain base/ flush type erected on filled polypropylene ISI marked (IS:14772-2000) board or polished thick varnished double wooden block / folded or screwed board with top of either wooden/3 mm thick hylam sheet/ 4mm thick plywood pasted with 1.5 mm thick Laminate with S M screws and duly connected. (Material +Labour)

5-2-5 Supplying and erecting metal clad distribution board 240V, 8 way,16A per way & neutral bar connector complete erected on iron /GI frame as per specification no. SW-SWR/MDB (Material +Labour)

9-1-4 Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EAEP (Material +Labour)

9-2-4 Supplying and erecting Annealed bare copper wire of high purity of different sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws in an approved manner. (Material +Labour)

2-5-8 Supplying and erecting LED street light fitting 100W, including lamp, with PF > 0.95, class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FG-ODF/FLS-2. (Material +Labour)

2-9-2 Supplying and erecting Street light bracket made from 40 mm. dia ‗B‘ class G.I. Pipe, 0.6m. in length along with pole cap of 300 mm length and 80 mm dia duly welded with provided leads as per specification no. FG-BKT/BPC (Material +Labour)

2-12-15 Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‗E‘ class insulation (Material +Labour)

Total impact of GST for the purpose of CTC

RR Electropower Works

Shama Engineering

PRAJAPATI AND SONS ELECTRICALS

Ms Sahare Electircals Chandrapur

MAMMOTH ELECTRICALS