Improvement works to the Supplying and Fixing of UPVC windows and ventilators for Adm section and stair case portion South side of main building in EEDC/Erode

Amount

Dismantling the existing damaged Windows including removal of frames, Hinges and fastening and side wall alround plastering with CM 1:5 12mm thick including cost of all materials, labour charges, tools and plants,all leads and lifts etc,complete as per specification.

Providing and fixing of UPVC (Unplasticized polyvinyl chloride) fixed ventilator section for vertical, Bottom and Top section for UPVC main frame work vertical and horizontally fixed to the wall with clamps and screws. Thefixed window will be a glass 4mm thick plain float glass in the portion including the cost of snap on clips rubber gaskets etc., complete.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm X 58mm and shutter profile size of 60X78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The Ventilator should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm X 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allolw leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.

SGST For bidders within Tamilnadu

CGST For Bidders within Tamilnadu

IGST For Bidders outside of Tamilnadu