Construction of 1st floor building of Maa Baradei Gym Center in ward no-44

Earth work in hard soil or gravelly soil within 50mtr. initial lead and 1.50mtr initial lift including rough dressing and levelling the bed

Conveying the excavated earth away from the work site by mech means

Filling in foundation with sand well watered & rammed including cost,conveyance, royalty & taxes etc.complete of all materials to work site as the specification approved by the department and direction of Engg-in-charge.

P:C.C (1:3:6) with 4cm size cbhg metal including all cost, conveyance,royalty & taxes etc.compete of all materials to work site as per specification approved by the department & direction of Engg-in-charge.

Fly ash brick masonry in C.M. (1:6) in super structure using 25cm x 12cm x 8cm brick having crushing strength not less than 75 Kg / cm2 Gym & Kitchen 1st floor

R.C.C. work of M25 grade with 20 mm down graded chips (C.B.) including hoisting & laying (1:F)

Fly ash brick masonry in C.M. (1:6) in fondation using 25cm x 12cm x 8cm brick having crushing strength not less than 75 Kg / cm2 Toilet ground floor foundation

Fly ash brick masonry in C.M. (1:6) in super structure using 25cm x 12cm x 8cm brick having crushing strength not less than 75 Kg / cm2 Toilet Ground floor

Labour charges for cutting, bending, binding and tying the grill including the cost of M.S. rod.

Rigid smooth centering and shuttering for R.C.C. works including false works and dismantlling them after casting including cost of materials complete in G.F ( a) R.C.C. beam, column, girder & Bressmer

(B) R.C.C. LINTELS

R.C.C. floor and roofslab, landings balconies, projecting sun-shades and chajjas upto 4.30 mtr height (Data for 9.00m2)

R.C.C Stairs excluding landing but including railings. (Data for 5.00M2)

R.C.C. beam, column, girder & Bressmer Main Beam

R.C.C. LINTELS

R.C.C. floor and roofslab, landings balconies, projecting sun-shades and chajjas upto 4.30 mtr height (Data for 9.00m2)

R.C.C Stairs excluding landing but including railings. (Data for 5.00M2)

R.C.C. work of M25 grade with 20 mm down graded chips (C.B.) including hoisting & laying (G:F)

Labour charges for cutting, bending, binding and tying the grill including the cost of M.S. rod.

Rigid smooth centering and shuttering for R.C.C. works including false works and dismantlling them after casting including cost of materials complete in G.F ( a) R.C.C. foundation

RCC beam ,colomn,grider & Bressmer

RCC Lintels

R.C.C. floor and roofslab, landings balconies, projecting sun-shades and chajjas upto 4.30 mtr height (Data for 9.00m2)

16mm thick C:P (1:6) over brick & stone masonry(1:F)

12mm thick C:P (1:6) over brick work

Fixing vertified tiles in floors, treads or steps and landing over 25mm bed of C:M (1:1) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete including the cost of pre-cast tiles(colour Printed)

Fixing vertified tiles in dados, skirting and risers of steps on 12mm C:P (1:3) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles. (colour printed)

Painting two coats with weather seal coat over a coat of water bound wall primer.(1:F)

Priming one coat with any approved primer inluding the cost of labour & primer (1:F)

Finishing plastered surface with plaster of paris and making smooth surface to receive painting including cost of plaster of paris.

Iron work wrought and put up in grated door

Painting two coats over a coat of priming over new wood work & Iron work with the cost of primer & paint.

Supplying, fitting and fixing up window(sliding type) made up aluminum section No.9778 as window fram, section No.4095, 4096 & 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber bending inculding locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-charge.

Providing fifting and fixing of Al. door with anodized Al. door section No.9202 as vertical member, 9201 as top member and 9200 as bottom and middle member with frame section as 9221 and 12mm thick pre-laminated board fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by meand of jointing angle No. 1855 including all cost of labour, T&p, hire charges of drilling machine, labour charges etc.complete.

6mm thick C:P (1:4) to R.C.C. surface finished smooth including closed deep chipping and slurry treatment.

Wall painting two coats with plastic emulsion paint of approved shade on new work to give an even shade excluding cost of paint

supply fixing of Display Board

2.50 cm thick grading concrete using C.C. (1:2:2) on roof slab with 6mm sizes down graded H.G. chips on new work

Fixing Ceramici tiles dados, skirting and risers of steps on 12mm C:P (1:3) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles. (colour printed)

Priming one coat with any approved primer inluding the cost of labour & primer (1:F)

16mm thick C:P (1:6) over brick & stone masonry(G:F)

12mm thick C:P (1:6) over brick work

Painting two coats over a coat of priming over new wood work & Iron work with the cost of primer & paint.

C:C: (1:2:4) using 12 mm to 20 mm size H.G. stone chips including the cost of all materials labour carriage, royalty etc complete.

PH & Sanitary Work Supplying all materials,labour and T&P for cutting holes through existing flyash brick walls for taking sand cast iron pipes/ A.C. pipes and fittings including mending good to the damages all complete ( A)250mm.to 375mm. thick wall

Supplying all materials,labour and T&P for cutting grooves in existing flyash brick walls for taking water supply pipes and fittings including mending good to the damages all complete

Supplying all materials, labour T&P for laying in trenches of following PVC ASTM Sch-80 confirming to IS 4985 of nominal diameter with all necessary fittings as per direction of Engineer-in-charge (a)25mm dia PVC ASTM Sch-80 pipe

25mm dia MTA

25mm dia FTA

25 x15mm dia UPVC brass Elbow

25mm UPVC socket

25mm dia UPVC Tee

25mm dia UPVC-ASTM Ball Valve with metal ball

25 mm PVC Ball Cock with Rod and Ball

40mm dia UPVC Elbow

40mm dia MTA

40mm dia FTA

40mm UPVC socket

40 x40mm dia UPVC Tee

Supplying fitting fixing of laminated single pannel shutter with choukath as per approved design includ-ing all cost conveyance labour T&P etc complete as per the direction of Engineer-in-charge.

Supplying all materials, labour, T&P and fixing of following P.H. fittings of approved make including supplying of all necessary jointing materials all complete as per approved specification and direction of Engineer-in-charge.

23" long EWC with 'S' trap with PVC Seat cover (Nycer / Parryware)

15 mm dia CP 2 way bib cock with wall flange -(Jaquar) Cat No.FUS-29041

15mm dia. C.P. WALL MIXER 3-IN-1 SYSTEM Jaquar Cat- FUS-CHR-29281

15mm dia. C.P. Angle stop cock.(FLR))

15mm dia C.P.revolving shower (bend type)

15 mm CP 2 in 1 Bib cock .(FLR)

15mm dia CP extn piece & flange

22"x16" W.H.Basin with complete fittings (Parryware)

Standard Pedestal for W.H.Basin

600mm x 450mm bevelled edge mirror

C.P. towel rail.(600x20)mm

C.P.soap holder/disc.

Standard sized CP glass-shelf

CP Towel ring

CP Health Foucet with 1.0 mtr PVC Tube

Supply all materials, labour, T&P and laying of following dia. SWR pipes and fittings, jointing with C.M. (1:1) fixing to walls with nails, bobbins and wooden plugs etc. all complete as per direction of Engineer-in-charge. 110mm dia P.V.C. SWR S/S Pipe (ISI type-B)

110mm dia. PVC SWR P' trap

110mm dia PVC SWR door bend

110mm dia. PVC SWR S/J with Door

110mm dia. PVC SWR Plain Bend

110mm dia. PVC SWR Pipe clip

110mm dia. PVC SWR Cowl

110mm dia. PVC SWR off set bend

90mm dia P.V.C. SWR S/S Pipe (ISI type-B)

90mm dia PVC SWR door bend

90mm dia. PVC SWR S/J with Door

90mm dia. PVC SWR Plain Bend

90mm dia. PVC SWR Pipe clip

Supplying all materials, labour, T&P for fitting and fixing of 1000Ltrs capacity Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS: 12701--1996 over head water storage tank of Sintex make with tank cover including lock and key arrangement etc. all complete as per direction of Engineer-in-charge (A)1000 Ltrs capacity PVC moulded Sintex tank (ISI).

Lowering the following size G.I/ PVC pipes with or without slotted pipes as per the necessity from ground level and fitted and fixed up in perfectly vertical position, including cutting and threading pipe and slotted pipe and supplying and fixing all jointing materials, tools and plant etc. complete and keeping the top of the casing pipe threaded including plugging bore wells to prevent entry of foreign materials from above.

Supplying, assembling, lowering and fixing in vertical position , unplasticized PVC casing 125 mm nominal inner dia Pipes(SCH-80) (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories. materials, loading and unloading, all taxes , sundries and T&P etc all complete as per direction of the Engineer -in-charge.

Cleaning and developing the bore well using their own compressor continuously worked till clear and adequate discharge is obtained from the bore well including supply and use of all necessary equipment and labour as per the direction of Engineer-in-Charge.

Providing and fixing suitable size threaded mild steel cap 125mm dia or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell all as per requirement and direction of Engineer-in-charge.

Providing and fixing M.S.125 mm clamp of required dia to the top of casing/housing pipe of borewell as per IS: 2800 (part I), including necessary bolts & nuts of required size all complete for borewell all as per requirement and direction of Engineer-in-charge.

Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (650 cfm/ 200 psi) as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories, tools and plant and consumables etc for lowering of 125 mm dia PVC/GI pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/PVC casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the Bore well)

Please Enable Macros to View BoQ information