Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.7 LAccepted-AOC MEHEM ROAD NEAR TVS BIKE AGENCY GOHANA SONIPAT HARYANA 131301 ON MEHAM ROAD NEAR TVS BIKE AGENCY GOHANA 131301 | SONIPAT | HARYANA | 131301 | L1 | Accepted-AOC accepted |
Tender Value
₹4.5 L
EMD Value
₹9,000
Closing Date
27 May 2022, 5:00 pmClosed
Executive Engineer
Electrical Division PWD BnR Br. Rohtak
Construction of Govt. Veterinary Hospital at Village Harigarh in Distt. Jind (Pdg. E.I. and Street Light only). Recall
2022_HRY_222603_1
PWD/Electrical/85047
Open Tender
Electrical Works
Item-rate/Agreement basic
60 days
Jind
Please refer to tender documents as per DNIT conditions.
3 documents required · 3 mandatory
₹500
₹9,000
Yes
17 Oct 2022
20 May 2022
30 May 2022
20 May 2022
27 May 2022
20 May 2022
Amount
Ceiling Fan / Exhaust Fan
20.71 Supply, Erection, Testing of Ceiling Fan IS marked (as per IS code 374) with suitable GI pipe complete in all respects complete as per directions of Engineer-in-Charge
20.72 Supply, Erection, Testing of Exhaust Fan IS marked (as per IS code 374)having a capacity of 45 cubic meter per minute complete with suitable GI sheet ducting in structure confirming to latest IS specifications complete in all respects complete to satisfaction of Engineer-in-Charge
23.3 Copper Wiring in PVC Conduit (Surface/Recess)
23.3.1 Wiring for Light/Fan/Call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe.
23.1.1.2 Group B
23.3.2 Wiring for Twin control light point with 2 Nos. 2 way, 5 amp. switch in 1.5 Sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe.
23.1.2.2 Group B
23.3.4 Wiring in PVC conduit system for 3 pin 5 amp. plug point by using 2 no. 1.5 sqmm FRLS copper wire and 1 No. 1.5 Sqmm FRLS copper wire, including providing 2 no. 5/6 Amp 3/5 pin socket and 1 no. 5/6 Amp switch required MS Box etc complete as required
23.3.4.2 Group B
23.3.5 Wiring in PVC conduit system for 3 pin 15 amp. plug point by using 2 no. 4 sqmm FRLS copper wire and 1 No. 4 Sqmm FRLS copper wire for earthing, including providing 2 no. 15/16 Amp 3/6 pin socket and 1 no. 15/16 Amp switch required MS Box etc complete as required
23.3.5.2 Group B
23.3.6 Wiring main and sub mains in Two single core for phase and neutral wire and one single core for earth wire PVC insulated copper conductor cable 1100 volts grade in PVC conduit etc complete as required
23.3.6.1 1 run of size 1.50 Sqmm (1/1.40 mm)
23.3.6.3 1 run of size 4 Sqmm (1/2.24 mm)
23.7.6 Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-charge of work.
23.7.6.2 PVC pipe of 25 mm dia
23.8 Fittings and Accessories.
23.8.1 Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connection, complete in all respect
23.8.1.12 Bakelite angle / straight button holder large size.
23.8.1.13 Socket size rotary step type Electronic regulator for AC ceiling fan
23.8.4 Supply and erection of 10.5 cm dia MS Fan box including 8 mm dia 30 cm long MS road made into suitable suspension hook and erected in RCC slab for the erection of fan complete with all labour and material required to complete the job
23.9 Erection of Exhaust fan in existing opening, complete with necessary earthing of Fan including carriage from PWD store to the site of work.
23.11 Making suitable hole in the wall suitable for exhaust fan upto 450 mm sweep including finishing the same and fixing of stainless steel wire mesh 2 mm thick having about 50 meshes per inch at exhaust side complete as required.
23.22 MCCB, Distribution Boards, MCB's, RCCB's, Change Over etc.
23.22.1 Supply and erection of modular case circuit breaker single pole / 4 pole on existing wall / pedestal / panel including bounding to earth and making necessary connections required to complete the job in all respect upto the entire satisfaction of the Engineer-in-Charge of the work.
23.22.1.3 Triple Pole MCCB 16 to 100 Amp., 25 KA
23.22.2 MCCB enclosure made of sheet steel suitable for mounting MCCB of following ratings
23.22.2.1 MCCB upto 125 A FP
23.22.4 Supply and erection of double door sheet steel enclosure distribution boards suitable for MCB's & ELCB's recessed in wall including bonding to earth complete with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work.
23.22.4.11 Vertical TPN DB Double Door 8 way (8 incoming 3 phase*8 outgoing)
23.22.5 Supply and erection of miniature circuit breaker 240/ 415 V in the existing distribution board including making necessary connections
23.22.5.1 6 Amp. to 32 Amp. Single Pole
24.1 Earthing and Lightening Arrestor
24.1.1 Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. (but without charcoal or coke and salt) as required
24.1.2 Extra for using salt and charcoal/coke for earth electrode as required.
24.1.11 Providing and laying earth connections from earth electrode with 4.00 mm dia GI wire in 15 mm dia GI pipe from earth electrode as required.
24.4.8 Supply and erection of Hot Dip Galvanized octagonal pole of 3 mm thickness with base plate including cost of nut and bolts, earthing studs integral cable termination arrangement 5 mm thick Bakelite base plate on suitable welded MS/GI bracket 32 amp 4 way connector 2 nos. 10 Amp SP MCB, end cover and all accessories as supplied by the manufacturer including providing RCC foundation of M25 grade (1 Cement: 1 Stone Aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for octagonal poles of various heights as per following specifications complete in all respect and nas per direction of Engineer-in-Charge. Make: GE/PHILIPS/VIPIN ST/ SKIPPER
24.4.8.5 7 metre long pole with top dia 75 mm and bottom dia 150 mm with base plate os size 300 x 300 x20 mm.
24.5.2 S/E of mark double walled corrugated (DWC) HDPE pipe10 Kg./Cm2 laid 0.75 mtr. below ground level including digging and refilling of earth including cost of suitable size socket / cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of the work
24.5.2.3 DWC/HDPE pipe 63/50 mm outer dia / inner dia
24.4.16 Supply and erection of weather proof M.S. box of size 20 cm x 15 cm x 10 cm. covered with 3.00 mm thick M.S. sheet hinged cover, locking arrangement, housed in wall, including the cost of 1 no. 16 amp. 415 volts SP MCB and 2 nos. 63 amp. 415 volts neutral links fixed on hard wood board/10 mm Bakelite sheet in the M.S. box including painting and necessary connections
M.R. Items
NS-1 S/E of underground cable loose in existing pipe or trenches complete in all respect upto the entire satisfaction of Engineer-in-Charge of the work.
i) 10 Sqmm 4 Core Cable (Armd.)
i) 16 Sqmm 4 Core Cable (Armd.)
N.S - 2 Supply & Erection of LED flood light fitting of Havells make JETA IRI SFL 100W LED or its equivalent make of Bajaj/Wipro/Phillips make with pressure die cast alluminium housing, reflector and enclosed with toughened glass with all accessories as supplied by the manufacturer complete in all respect upto the entire satisfaction of Engineer-in-Charge of the work.
N.S - 3 Supply and Erection of LED street light lumanaries of Havells make Endura CITYLINER NEOSL 70W LED or its equivalent model and specifications of Wipro/Phillips/Bajaj make with die cast housing, toughened glass IP66 with all accessories as supplied by the manufacturer with all labour and material required to complete the job in all respect upto the Entire Satisfaction of the Engineer-in-Charge of the work.
N.S - 4 Supply & erection of M.S. Box made of 16 Gauge of size d 8" x 10" x 4" covered with3 mm thick Bakelite sheet white colour of ISI Mark fixed by means of 4 Nos. brass screws with cost of 1 No. 15 Amp. multi socket of ISI Mark and 15 Amp. switch and 3 Nos. 5 Amp. multi-socket with 5 Amp. switches of ISI Mark including fixing the M.S. Box in wall with cost of cement sand mixture including painting of M.S. Box and to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of the work. (Based on HSR)
N.S - 5 Supply and erection of MS Saddle and clamps duly galvanized , on wall / RCC parapet for fixing underground cable at a distance of 0.60 metre center to center fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect and upto entire satisfaction of the Engineer-in-charge of work. (Based on Old HSR 31.48)
N.S - 6 Supply and erection of MS stand made of 50mmx50mmx6mm angle iron frame and 150cm long, 30cm wide with MS sheet covering size 30cmx30cm 3.15mm thick fixed on the top of board & legs duly embedded in 1:2:4 cement concrete block 30cm below ground level including the cost of cement sand, welding, painting & fabrication charges etc. up to the entire satisfaction of Engineer - in - charge of the work. (Based on Old HSR 31.51)
N.S - 7 Supply and Erection of LED Tube fitting with all accessories as supplied by the manufacturer complete in all respect. Make: Philips/Wipro/Havells
i) LED Tube Light Fitting 18 W
ii) LED Tube Light Fitting 40 W
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .