REPAIR/MAINT OF MAINT OF BOUNDARY WALL, GATES, GATE PILLARS, PCC COPING, JAFFARI WALL OTHER MISC WORKS IN DOMESTIC AREA

Amount

SCHEDULE A BOQ

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground posts embeded in concrete, brick work, masonry etc complete all as specified and as directed.

M&L for angle iron / flat iron for fixing chain link or hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and clountersunk for balusters running bars, for doors, balusters, nosing to steps including embneding in concrete and screwing etc wid ties for roof including securing bolts, posts and struts in fencing including cutting tops shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or reveting etc, and similar work conforming to Fe-290 or Fe-165 complete all as specified and directed.

M&L Plain Cement concrete 1:3:6,type C-2, (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete etc complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed withearth around, in layers not exceeding 25 cm, in hard/ dense soil complete all as specified and as directed.

S&F in repairs Galvanised steel punched type concertina coil 1050mm dia (dia of coil with unstreched) and streched for a length of 6RM/ Coil while fixing and fixed to angle iron posts/ supports binded with 3.15mm dia GI wire complete all as specified and directed. Note :- Weight of one coil, with 50 Turns of 1050mm dia and 129 number clips shall not be less than 15.2 Kg.

Dismantling fencing wire mesh, any type and any size complete all as specified and as directed.

Supply only Chain link mesh, made of galvanised wire and shall confirm to IS 2712-2003 and having zinc coating of type heavy as laid down in IS 4826 including binding wire etc fixed to any type of standards posts complete all as specified and as directed.

Straining and fixing only chain link fencing including line wires, any mesh size and type of to any type of standards, rails, straining bolts etc including provision 10mm dia MS bars as line wire welded to fencing posts and MS flat iron for fixing fencing wire mesh including taking down existing fencing complete all as specified and as directed. Note : supply only chain link mesh and 10mm dia round bars shall be measured and paid vide relevent item. However, labour aspect for fixing is deemed to be included in this item.

Supply only 10mm dia round bars, cut to length ,hooking ends as in wooven/ straining bar (stiches through chain link fencing between post) complete all as specified and as directed.

M&L in repairs Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and as directed Note :- Each line of wire to be measured.

Restraining and securing of existing barbed wire fencing including making good staples or steel pins complete all as specified and as directed. (Note: Each line of wire to be measured).

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240) complete all as specified and as directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted , bolted or welded attachment.(Fe 410 -W (Gde- E-250) quality -A complete including dismantling existing one all as specified and as directed.

M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other to be fitted with washers and one hexagonal or square nuts, n exc 5cm long diameter of neck 5 to 10mm including taking down existing one complete all as specified and as directed.

M&L Framed work such as grills, gratings, angles etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of static water tanks and similar work con- forming to Fe.290.Gde-E-165 including dismantling/ taking down existing framed work and applying two coats of synthetic enamel paint including one coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including roof coverings complete all as specified and as directed.

M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of and colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L Preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L Preparation of new or previously untreated steel surfaces under 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of of red oxide primer complete all as specified and as directed.

Demolition of brick work masonry, built in cement mortar including all quoins, pillars etc., complete all as specified and as directed.

M&L brick work with fly ash modular bricks, straight or curved on plain exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L Precast cement concrete solid block masonry (1:3:6 type C-1,20mm graded stone aggregate) exc. 10 cm in width and setting in cement mortar 1:4 complete all as specified and as directed.

M&L PCC 1:4:8, type D-2, using 40mm graded stone aggregate in foundation filling and mass concrete etc complete all as specified and as directed.

Taking down cement plaster and the like from brick or stone wall and concrete surfaces including racking out joints, hacking for keys, scrubbing down with water etc. complete all as specified.

M&L for rendering 15mm thick in two layers on fair faces of stone surfaces in cement mortar 1:4, including finishing even and fair without using extra cement, complete all as specified.

M&L for rendering 15mm thick in two layers on fair faces of brick or concrete surfaces in cement mortar 1:4, including finishing even and fair without using extra cement using WPC, complete all as specified.

Supply only integral water proofing compound for plastering / concrete work, complete all as specified.

M&L applying two coats of cement based paint on newly plastered surfaces of walls over a coat of alkali resistantint priming paint including preparation of new surfaces complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L 75mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate finished even & smooth without using extra cement complete all as specified and directed

M&L 100 mm thick Plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate ) as in sub base , fillng and mass concrete or as in receiving tiles/ surface channels and drains etc complete all as specified and directed.

M&L Hardcore of Broken stone/boulders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface complete all as specified and directed

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not packing) removing of serviceable tiles to store and rubbish off the premises complete all as specified

M&L chequered cement concrete tiles 20cm x 20cm x 25mm thick machine pressed set jointed and pointed in neat cement slurry as in floors and cut and polished using grey cement and pigments over screed bed or bedding layer of mortar 15mm thick for laying floor fnishes in cement mortar (1:4) complete all as specified and as directed by Engineer-in Charge.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed

Demolition of cement concrete (reinforced) in of any description and in any position and removal of debris out of MD land complete all as specified and directed.

M&L formwork of flat surfaces to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc

M&L RCC 1:2:4, Type B–1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directedcomplete all as specified and as directed.

M&L Reinforced precast cement concrete in 1:2:4 type B0 (using12.5mm graded stone aggregate) in Jallies, 45mm thick (measured solid) including all moulding but excluding frame set in CM 1:6 complete all as specified and as directed.

M&L PCC type B-1, 1:2:4 (20mm graded stone aggregate) as in roof kerbs, benching rounded or chamfered on edge all as specified complete all as directed.

M&L Precast cement concrete 1:2:4, Type B–1 using 20mm graded stone aggregate in landings,cover slabs(for man holes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 complete all as specified and as directed.

M&L TMTsteel bar of grade Fe-500 ,10 mm dia and above cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

M&L TMTsteel bar of grade Fe-500, 5 mm dia to 10 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips in stirrups , spacers and binders etc complete all as specified and directed.

Taking down and refixing the steel gate not exc 3.00 sqm in each pane after repair of rusted or damaged portion of the gate including pivot, holdfast, stopper, locking arrangement, pintel etc., and including necessary greasing to shutter, spot/running welding if required complete all as specified and directed. Note: New mild steel required for replacing, rusted or damaged portion will be measured separately.

Taking down and refixing the same steel gate exc 3.00 but not exc 5.00 sqm in each pane after repair of rusted or damaged portion of the gate including pivot, holdfast, stopper, locking arrangement, pintel etc.. and necessary greasing to shutter, with or including spot welding, running welding complete all as specified and directed. Note: New mild steel required for replacing rusted or damaged portion will be measured separately.

S&F stainless steel letters 8 inch height made out of 1 mm thick stainless steel plate, cut folded, welded to required shape including fixing on the granite with bolt nuts etc all as directed by Engineer -in-Charge.

S&F stainless steel letters 12 inch height made out of 1 mm thick stainless steel plate, cut folded, welded to required shape including fixing on the granite with bolt nuts etc all as directed by Engineer -in-Charge.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded or pointed in any mortar complete all as specified and directed.

M&L Granite work (of any type) 18 to 20mm thick (table rubbed and polished including round edge) in steps, jambs, pillars, window cills, cooking platforms, wash basin platform and like in cement mortar 15mm thick (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with granite shade over complete all as specified and directed by Engineer-in-Charge.

M & L preparation of plastered or un plastered old surfaces of walls, Chajja, balcony, facia etc. by brooming down or steel wire brushing scrapping down, smoke shoots moulds, mass efforescent salt, treating oil and greasy spots ect and applying one coat of cement based paint including preparation of old surface of wall complete all as specified and directed.

M&L for preparing of old steel surfaces exceeding 10 cm width/girth and applying one coat of synthetic enamel paint all as specified.

M&L Welding in repairs exc 2.5cm but n exc 5cm in length exc 6mm but n exc 9mm thickness thickness of Metal to be welded complete all as specified and directed.

M&L Welding in repairs exc 2.5cm but n exc 5cm in length exc 20mm but n exc 25mm thickness of Metal to be welded complete all as specified and directed.

D.R ASSOCIATES (BID ID -3407795)

NLK Construction (BID ID -3407296)

CAK Enterprises (BID ID -3407619)

p.chinnasamy (BID ID -3407785)

P JAYAPATHY & C0 (BID ID -3409115)

NAVEEN ENTERPRISES (BID ID -3409537)

KUMAR AGENCIES (BID ID -3410202)

Neptune Engineers and Builders (BID ID -3407830)