ADDITION/ALTERATION FOR BISAG OFFICE AT SAFDARJUNG AIRPORT AREA, NEW DELHI UNDER GE NEW DELHI

Amount

Dismantling wall & ceiling boards of any description as in panelling ceiling, partition, cup boards etc. including cover fillets in any surfaces complete all as specified and directed

S&F pre-laminated PVC rigid foam sheet wall panelling of 5 mm thick stuck on inner frame work of 35 mm wide strips of 5 mm thick rigid foam sheet. The strips should have a groove of 6 mm width and 2 mm depth for sinking the head of screw used to fix the strips to the wall and should be placed vertically at equal intervals of 300 mm C/C. The PVC strips to be fixed to the wall using 65 mm long MS screws through the groove in the strip by using PVC fastener including necessary moulding work on reveals, Jambs, cills, openings, top and bottom portion of PVC panels etc. complete all as specified and directed . Note:- (a) Work for fixing of wall panelling shall be got executed through manufacturer's authorised applicators only under the close supervision of their technical staff. (b) The entire quantity of material for wall panelling and their allied ancillaries shall be procured directly from the manufacturer or their authorised dealer only.

M&L for best quality vinyl wall paper on wall applying with necessary adhesive over and including one coat of primer including one coat of wall care putty to achieve uniform even and smooth surface including matching corners and angles complete all as specified and directed.

M&L aluminium composite panels cladding of approved make having total thickness of 4mm (top coil-0.5mm, non toxic PE-core - 3mm and back Coil- 0.50mm) with 25 micron PVDF coating on top coil and polyester/epoxy coating on back coil (4-7 microns) on aluminium substructure fixed with 19mm x 12mmx 1.6mm aluminium cleat & 10 x 100mm SS wooden screw with PVC plug on face horizontal/vertical surfaces of rectangular/ circular columns suspended ceiling cills, jambs, canopy with including necessary aluminium frame etc. and making 12mm to 20mm wide grooves and including applying non staining and non sticking water proofing silicon sealant and backing rods complete all as specified and directed. Note:- Only exposed surface shall be measured and paid for.

M&L for False ceiling at all height with semi perforated 12 mm thick micro tegular edge GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595x595mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.85 (with 50 mm thick glass wool) as per IS 8225 :1987, Non-combustible as per BS 476 (part-4) -1970 and light reflectance of 75-85% to be laid in true horizontal level or in slope as per site requirement suspended on & including interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120 grams per sqm including both sides) Comprising of main - T runners of size 15x32mm of length 3000 mm, cross-T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32mm of length 600 mm to form grid module of size 600x600mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod up to 1000 mm length and L shape level adjuster of size 85x25x2mm. Galvanized iron perimeter wall angle of size 24x24x0.40mm of length 3000 mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall SS screws. The work shall be carried out as per specifications and as per direction of Engineer-in-Charge complete all as specified and directed

S&F Glazed Partition with 12 mm thick toughened glass of approved make and manufacture, edges with Crystal/pencil polished all-round with patch fittings of top, bottom, sides and corners patch fixing arrangement and making necessary holes cut out etc. complete all as specified and directed.

Taking down chowkhats or frame without taking off shutters n.exc 1.50 sqm each complete all as specified and directed

Taking down chowkhats or frame without taking off shutters exc 1.50 sqm but n.exc 4.0 sqm complete all as specified and directed.

M&L factory made UPVC Sliding window of approved colour Three track made of extruded profiles with wall thickness of 2.3 mm (± 0.2 mm). Window profile with hollow section with multi chamber. Frame (88 mm x 52 mm), sliding sash (42 mm x 67 mm). Sliding mesh Sash (42 mm x 57 mm) Sliding interlock (One vertical length in each shutters) (45.5 mm x 28 mm), Glazing bead (24.5 mm x 16 mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2mm (± 0.2 mm) thick galvanised steel Frame (30 mm x 18 mm) 2 nos, sliding sash (30 mm x18mm), sliding mesh sash (26 mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100 mm long fasteners, including hardware [Touch Lock of zinc alloyed (white powder coated), including steel roller system and including stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and 5.5mm thick sheet glass and required accessories complete all as specified and as directed. Note:-Net front superficial area of window shall be measured & paid for.

Excavating in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth; for foundation etc. and getting out as in hard/dense soil complete all as specified & directed.

M & L PCC 1:4:8 type D-2 (Using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M & L for brick work with subclass ‘B’ bricks using old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Returning filling in, including Spreading and levelling in layers n. exc 25cm thick including well ramming and watering as in soils complete all as specified and directed.

M&L for Removing excavated material exc 1.50KM but n exc 5 KM and depositing where directed at a level n exc. 1.5 m above the starting point as in soils complete all as specified and directed.

M&L for 15mm thick Ready mix plaster on brick work or concrete surfaces of wall (external surface) finished even and smooth complete all as specified and directed.

M&L for 12mm thick Ready mix plaster on brick work or concrete surfaces of wall (Internal surface) finished even and smooth complete all as specified and directed .

M&L for two coats of distemper oil emulsion over and including a coat of alkali resistant primer including a coat of wall care putty to achieve uniform even and smooth surface on walls including preparation of newly plastered surfaces complete all as specified and directed..

M&L for two coats of weather proof exterior emulsion over and including a coat of wall care putty to achieve uniform even and smooth surface (Exterior grade) & one coat of exterior primer on newly plastered surface complete all as specified and as directed.

Demolition of cement concrete in ground floor and pavings n.exc 15 cm in thickness below or above ground level & removing the rubbish outside of premises where local municipal authority permits complete all as specified and directed.

Demolition Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Demolition of Cement concrete (reinforcement cut as required to facilitate demolition) in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C-1, (using 20 mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for 40mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement & laying of PVC dividing strip as in floor complete all as specified and directed. Note:- PVC dividing strip shall be measure and paid separately as 'supply only'.

Supply only plastic dividing strips 1.5mm thick and Width of strip 38mm as in floor complete all as specified and directed.

M&L for coloured vitrified ceramic tiles 10 mm thick(Square/Rectangular) polished Double charged (dark shade) area of each tile exceeding 0.42 Sqm but not exceeding 1.00 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white of coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for coloured vitrified ceramic tiles 10 mm thick(Square/Rectangular) polished Double charged (dark shade) area of each tile exceeding 0.42 Sqm but not exceeding 1.00 Sqm as in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white of coloured cement to match the shade of tiles over and including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

M&L for wooden flooring, wooden laminated type made of high density fibre board (HDF), comprising of tongue and groove interlocking type of planks of 1210 x 193 mm size 8mm thick, commercial grade, abrasion resistance of AC-II category, over and including 6 micron polyethylene and foam cushion sheeting over the concrete surface to minimize moisture migration from the concrete including all fixing material i.e. chemical adhesive, base strip/fillets etc. veneered and matching top beading and wooden moulding for openings etc. complete all as specified and directed.

S&F dual roller - zebra pattern blinds of approved make vertical type (Translucent) made out of fabric cloth of approved shade fixed as per the instructions of manufacturer, complete all as specified and directed.

S&F 20 mm thick granite work (any type ) Black or any approved colour (table rubbed and polished in step, jambs, pillars, cooking platform (in single piece) and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20 mm thick screed in cement mortar 1:6 including necessary full round moulding on edges etc. complete all as specified and directed.

M&L for MS framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for two coats of synthetic enamel paints over and including one coat of red oxide primer including preparation of new steel surfaces over 10 cm in width or girth not otherwise described complete all as specified and directed.

Taking down carefully old point wiring (Light / Fan/ Socket) with aluminium/ copper conductor cable complete including fittings such as ceiling rose, holders, regulators, bell, switch ,socket, ceiling fittings, bulk head fittings, light fittings etc. from existing concealed conduits/surface conduits and making good the disturbed surface of wall/ floor complete to match with the existing surface/finishes complete all as specified and directed.

M&L for Point wiring with 1.5 sqmm, single core , PVC insulated, unsheathed FRLS cable, 1100 volts grade, IS -694 marked, with multi stranded copper conductor and earth continuity copper conductor cable of 1.5 Sqmm and connected to common earth dolly drawn through and including new rigid PVC conduit of suitable size along with fittings and accessories, concealed in walls/ceilings including cutting chases and making good to walls, floors including suitable modular bottom sunk type pressed steel terminal box and suitable modular coloured top cover with frame of suitable modules complete all as specified and directed for the following :-

One light/fan point controlled by one, one way switch.

One three pin socket outlet 5 Amp controlled by one, one way switch on same board

One three pin socket outlet 5 Amp controlled by one, one way switch on independent board

M&L for Point wiring with 4.0 sqmm, single core ,PVC insulated, unsheathed FRLS cable, 1100 volts grade, IS -694 marked, with multi stranded copper conductor and earth continuity copper conductor cable of 4.0 sqmm connected to common earth dolly drawn through and including new rigid PVC conduit of suitable size along with fittings and accessories, concealed in walls/ceilings including cutting chases and making good to walls, floors etc., including suitable modular bottom sunk type pressed steel terminal box and suitable modular coloured top cover with frame of suitable modules on independent board complete all as specified and directed.

Supply and fix coloured modular switch 6 Amps 1 module 230 Volts one way complete all as specified and directed. Make :- Legrand 573600, Indoasian- 810700, Anchor-68001B

Supply and fix coloured Modular switch 1 way 16 Amps 1 module 230 Volts complete all as specified and directed. Make :- Legrand -5732563, Indoasian- 810701, Anchor-68007B

Supply and fix coloured modular socket , 6 Amp 5/6 pin combined shuttered type, 2 module, 230 Volts complete all as specified and directed. Make :- Legrand 573670, Indoasian- 810720, Anchor-21113MB

Supply and fix coloured modular socket , 16 Amp 5/6 pin combined shuttered type, 2 module, 230 Volts complete all as specified and directed. Make :- Legrand 573671, Indoasian- 810721, Anchor-303373MB

S & F LED Light fitting 36 watts 2'x2' Ultra modern recess mounting luminaire suitable for roof ceiling complete with & including separate electronic driver & high brightness SMD LEDs, 36W LED 4000K lamp type complete all as specified and directed. Make :- Polycab- PMD0501024, PHILLIPS - RC360B

Taking down carefully old unserviceable submain wiring with aluminium/ copper conductor cable complete including fittings and accessories complete all as specified and directed.

S&F sub main wiring with two runs PVC insulated unsheathed FRLS stranded copper conductor cable of size 4 Sqmm along with one run of PVC insulated unsheathed stranded copper conductor cable of size 4 sqmm as earth wire connected to earth dolly drawn in and including new concealed PVC conduits, including cutting chases and making good to walls, floors etc., complete all as specified and directed. Note :- Two run of 4 sqmm copper conductor cable, one run of 4 sqmm copper cable and one run of PVC conduit pipe shall be measured as one unit length.

S&F sub main wiring with two runs PVC insulated unsheathed FRLS stranded copper conductor cable of size 2.5 Sqmm along with one run of PVC insulated unsheathed stranded copper conductor cable of size 2.5 sqmm as earth wire connected to earth dolly drawn in and including new concealed PVC conduits, including cutting chases and making good to walls, floors etc., complete all as specified and directed. Note :- Two run of 2.5sqmm copper conductor cable, one run of 2.5 sqmm copper cable and one run of PVC conduit pipe shall be measured as one unit length.

S&F in replacement MCB DBs single pole with neutral sheet metal enclosures double door type, 240 Volts, with 200 amp rated bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory made complete without MCB and with enclosures blank plate for unused way suitable for 8 way including wall cutting and making good to walls complete all as specified and directed. Make : Legrand 507641, Indoasian- 811826, Anchor-36766

S&F in replacement MCB DBs single pole with neutral sheet metal enclosures double door type, 240 Volts, with 200 Amp rated bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory made complete without MCB and with enclosures blank plate for unused way suitable for 12 way including wall cutting and making good to walls complete all as specified and directed. Make : Legrand 507642, Indoasian- 811828, Anchor-36777

S&F in replacement MCB DBs single pole with neutral sheet metal enclosures double door type, 240 Volts, with 200 amp rated bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete with out MCB and with enclosures blank plate for unused way suitable for 16 way including wall cutting and making good to walls complete all as specified and directed. Make : Legrand 507643, Indoasian- 811829, Anchor-36788

S&F in replacement factory made load line DB's double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 8 way VTPN 415 Volts, IP 43 with suitable busbar, neutral link & earth link suitable for MCCB TPN as incomer & MCB SP/TP as out going complete and including wall cutting and making good to walls complete all as specified and directed. Make : Legrand 507752, Indoasian- 811873, Havells- DHDLVSRWG0F012

S&F in replacement MCB SP 6 to 32 Amps, B series, 10 KA rupturing capacity, IS-8828 marked complete all as specified and directed. Make : Legrand 408592, Indoasian- 811013, Heavells - DH0NBSPA020

S&F in replacement MCB SPN 240 Volt of capacity 32 to 60 Amp rating, "B" Series, 10 KA rupturing capacity complete all as specified and directed. Make : Legrand 408615, Indoasian- 811036, Heavells - DH0NBSPN020

S&F in replacement MCCB TPN 160 Amp, 36 kA thermal released type, 'C' series complete all as specified and directed. Make : Legrand 420357, Indoasian- 830334, Heavells - IHA13EBT0160

S&F in replacement wall fan made of sturdy Engineering plastic complete with all accessories , 230V, 50 Hz, 1200 RPM, Copper winding , 400 mm sweep, 3 blade, single phase, complete all as specified and directed. Note:- Old wall fan shall be deposited to concerned authorities as directed by Engr-in-Charge. Make : Heavells - FHWSUSTGRY16, Cropmpton-1200WF

S&F stepped type modular electronic fan regulator , two module complete all as specified and directed. Make : Legrand 573662, Indoasian- 810740

S&F in replacement ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE with copper wounded motor complete all as specified and directed. Note:- Old ceiling fan shall be deposited to concerned authorities as directed by Engr-in-Charge. Make : Heavells - FHCX1F5SIVR48, Cropmpton-1200CF

S&F GI Raceway of size 300 X 38 mm made from 1.5 mm thick pregalvanized MS sheet for top, bottom & sides and complete with top cover with rubber gasket along with vertical bends, bends, including taking down and re fixing any type of electric cable, LAN /signal cable, if required, including wall/floor cutting and making good surface of disturbed area complete along with bracket clamp, bend and coupler made of GI for fixing complete all as specified & directed.

Supply & fix of GI Raceway of size 100x38 mm made from 1.5 mm thick pregalvanized MS sheet for top, bottom & sides and complete with top cover with rubber gasket along with vertical bends, bends, bracket clamp, and coupler made of GI for fixing including taking down and re-fixing any type of electric /signal cable, if required, including wall/floor cutting and making good surface of disturbed area all complete along with bracket clamp, bend and coupler made of GI for fixing complete all as specified & directed.

S&F Pop up type flush mounting boxes with "Push and Slide" locking system to avoid accidental opening by foot to be equipped with socket outlets for installation use with flush mounting boxes for concrete floors of 8 modules (2 x 4) , matt aluminium finish complete all as specified & directed.

S&F Information outlets- toolless (Data socket) RJ-45 Category 6 Module complete all as specified & directed. Make : Legrand - 573428, Indoasian- 810732, Havells-AHFKXXW062

S&F telephone Socket RJ-11 Module complete all as specified & directed. Make : Legrand - 573426, Indoasian- 810731, Havells-AHOKRW111

S&F modular cover plate inner and outer white in colour 3 M made up of polycarbonate complete all as specified and directed. Make : Legrand - 575720, Indoasian- 810802

S&F HDMI Socket complete all as specified & directed. Make : Legrand - 572006, Havells-AHFKXXB061

S&F CAT-6 cable for LAN connection to all computers including taking out existing old LAN cables complete all as specified and directed. Make : Legrand - 689735, Havells-WHL5TTERCAT6

S&F copper control communication transmission wiring 4 Core x 4 sqmm in & including new PVC conduit between indoor & outdoor, indoor units and their remotes complete all as specified & directed.

S&F MCB TPN 400 Volt of capacity 100 Amp rating, thermal energy released type 'C' series complete all as specified and directed. Make : Legrand - 408704, Indoasian- 811563, Havells-FEA9S4P100

S&F wire meshed hot dip Galvanized cable tray 54mm (h) x 200 mm (w) complete with nuts bolts washers (GI) and all accessories for mounting , along with Bracket, clamp, vertical bends, and provn of necessary fix arrangement complete all as specified & directed.

M&L for laying of XLPE PVC sheathed armoured cable 50 sqmm 3.5core fixed on wall with saddles/ laid in cable tray complete all as specified and as directed by Engr-in-Charge.

M&L for laying of XLPE PVC sheathed armoured cable 70 sqmm 3.5core fixed on wall with saddles/ laid in cable tray complete all as specified and as directed.

Supply , installation, testing and commissioning of outdoor LT electric panel constituting of double door Kiosk type mounted fabricated out of 3 mm thick MS sheet duly painted powder coated precoated provisioned mounted on suitable PCC platform made of PCC 1:3:6 type C2 with 40 mm graded stone aggregate including Bus bar chamber of 3 phase 4 strip 415 volts with 400 Amps copper busbar of suitable size for phase and neutral mounted on hygroscopic insulators complete all as specified and as directed comprising of the following:- INCOMER i) MCCB 4 pole 250 A, incomer, 415V, 50Hz, 16 KA - 01 No. OUTGOING i) MCCB 4 pole 160A, 415V, 16 KA - 01 Nos. ii) MCCB 4 pole 63 A, 415V, 16 KA - 03 Nos. iii) MCB TPN 32 A -03 Nos. iv) Extra Space for 02 Nos MCCB 4 pole BUSBAR :- 400 A rated copper bus bar with colour coded heat shrinkable sleeve METERING & INDICATION i) Ammeter, Digital type, with suitable CTs (0-400A) - 01 set ii) Voltmeter, Digital type (500V) - 01 set iii) R-Y-B phase indicating lamp- 01 set (iv) Internal wiring with suitable size of PVC insulated stranded copper conductor duly crimped with copper lugs ferruled.

Supply and fix wire meshed hot dip MS Galvanized cable tray 54 mm (h)X100mm (w) complete with nut bolt washers (GI) and all accessories for mounting , along with vertical bends, including taking down and refixing any type of electric cable, LAN cable Complete all as specified and directed.

Material & labour for Electrical Earthing with GI plate electrode of size 60 cm x 60 cm x 6 mm thick buried directly in ground vertically earth pit not less than 2.5 mtr deep below normal ground level with the top edge of the earth plate at a depth not less 1.5 mtr below normal ground level connected to GI strip earth lead of size 25X4 mm by means of bolts, nuts, washers made of galvanised iron and connected to test points all as specified and shown in Electrical plate No 3 of MES schedule (SSR) Part-I, 2009, watering pipe shall be 20 mm bore GI light grade and 40mm light grade for strip protection, including excavation & earth work in any type of strata, charcoal, salt and PCC 1:2:4 type B1 in chamber RCC 1:2:4 type B1 cover slab with 6 mm dia mild steel bars at 100 mm centre to centre both ways and with 6 mm dia MS hook complete and making a good surface of existing PCC hard standing/surface area and testing resistance all as specified and as directed. Note:-(i) Cost of GI earthing strip size 25X4mm & protection pipe up to 7.5 Mtr is included in quoted rates.

Supply and fix UPS for 30 min back up time, three phase AC input 300 to 450V and out put single phase AC out put Voltage 230 V ± 1% of capacity 40 KVA including backup battery bank of appropriate capacity & cables for connecting three phase electric supply as the input of UPS and single phase output supply of UPS , battery cable and standing rack complete all as specified & directed

Supply, Installation, Testing & Commissioning of modular type Variable Refrigerant Flow/ Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s) 18HP capacity, microprocessor based Controller, top discharge type condensing unit(s), with R410A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 230V+/-10%, 1 Phase, 50Hz AC power supply for Indoor unit and three phase for outdoor etc. with highly efficient scroll compressors with 100% inverter technology type compressors special heat exchanger, low noise condenser fan, auto check function for connection error, auto address setting and including automatic phase sequence corrector capacity 18 HP Outdoor (Cooling & Heating) - (Top Discharge) including MS angle stand of suitable size duly painted with two coats of synthetic enamelled paint over a coat of primer suitable for mounting of outdoor unit along with vibration pad complete all as specified & directed.

Supply, Installation, Testing & Commissioning of indoor units address setting & capacity as mentioned below, multispeed motor, coil section DX coil, outer cabinet drain pan, drain water lift-up mechanism, insulation, pipe connections, with bell and copper Y joint (Indoor) size 31.8 O.D (Insulation : 19mm), remote control unit with cordless remote(including tuning) etc. of the following various capacities complete all as specified and directed :-

2.65 TR 4 Way Cassette

4.0 TR 4 Way Cassette

Supply, Installation, testing and commissioning including vaccumization and Nitrogen testing of following nominal sizes of soft/ hard drawn copper refrigerant piping for VRV/ VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/ brazing including accessories, insulated with XPLE Class-O tubular insulation/ with Class-O closed cell elastomeric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines including all accessories complete all as specified and directed :-

31.8 mm Outer Dia (insulation : 19 mm )

28.6 mm Outer Dia (insulation : 19 mm )

22.2 mm Outer Dia (insulation : 19 mm )

19.1 mm Outer Dia (insulation : 19 mm )

15.9 mm Outer Dia (insulation : 13 mm )

12.7 mm Outer Dia (insulation : 13 mm )

9.5 mm Outer Dia (insulation : 13 mm )

6.4 mm Outer Dia (insulation : 13 mm )

Supply and fixing of 25 mm dia PVC drain pipe with fittings and accessories including fixing support Complete all as specified and directed.

Supply and fix Control & Transmission wiring 2 Core X 1.5 Sqmm with drawn in and including new PVC conduit of suitable size Complete all as specified and directed.

M&L for topping up of refrigerant gas R410A for VRF air conditioning system complete all as specified and directed.

S&F USB charging socket one Module 240 volt made of PVC body complete all as specified as directed Make : Legrand - 573621, Indoasian- 810752, Anchor- USB1M

Taking down carefully existing old outdoors units (3 Nos.), air conditioner duct any type/ size from AHU room to complete internal side all branches of room no 209 including fittings and fixtures such as supply air grill with duct, return air grill with duct and insulation materials, split AC's and window AC's, etc. and making good the disturbed surface of wall/ floor complete to match with the existing surface/finishes complete all as specified. Note :- Materials/items obtained shall be removed and deposited to store of the concerned authority for keeping in safe custody all as directed. Note for Srl item Nos. 71.00 to 78.00 :- Entire Work for Air conditioning shall be got executed through the original manufacturer or their authorised agency only under the close supervision of their technical staff

S&F fix warm white glare free 2'x2' , 36 watt LED panel light suitable for fixing in the false ceiling complete including separate electronic driver complete all as specified and directed

S&F RJ 45 cable connector complete all as specified and directed.

M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M/s KUMAR BUILDERS

M/S ANIL KUMAR

M/S Sunil Steel Works

SANJEEV ENTERPRISES

M/S Parshant Associates

M/S Chhavi Constructions Co

L G BUILDERS

imran construction company