SOPD(G)/NLB/08

Amount

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees girth upto 300mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150mm in thickness as per Technical Specification Clause 201.i) By Manual means. A) In area ofnon thormy jungle

Making 50mmx50mm furrows (Making 50mmx50mm furrows , 25 mm deep, 450 to the center line of the road and at one metre interval in the existing thin bituminous wearing coarse including sweeping and disposal of excavated material within 1000 meters lead)

Construction of subgrade and earthen shoulders with approved materials obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 (including cost of testing of materials at site and laboratory as directed by the deptt.) From Private land.

Providing, laying, spreading and compacting stone aggregate of specific sizes to water bound macadam specification including spreading in unirorm thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading III as per Technical Specification Clause 405. (With an initial lead of 5.00 km) (iii) Grading III

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.70-1.0 Kg/Sq.m. using mechanical means as per Technical Specification Clause 502.

Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 Kg to 0.30 Kg per Sqm. on the prepared granular surface tresated with primer & cleaned Hydraulic broom as per Technical Specification Clause 503.

Providing and lying bituminous concrete with 100-120 TPH batch type HMP producing and average output of 75 tonnes per hours using crush aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5.6% of mix and filter transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment , rilling with smooth wheeled , vibratory and tanden roller to achieve the desired compaction as per MORTH Cl. No. 509. complete in all respect. (including carriage of mixed materials upto 10.00 km initial lead from mixing plant (inluding coat of testing of materials at site and laboratory as directed by the deptt).

Direction and place identifiction sign more than 0.90 sqm size board. providing and erecting direction and place identification retro-reflectorized sign as per IRC:67 made of encapsulated lens type reflective sheeting vide cl.801.3, fixed over aluminium sheeting, 2 mm thick with area execeeding 0.90 sqm fixed on an angle iron of 25X25X4 mm supported on mild steel angle iron post 75x75x6mm 2 Nos. firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45cmX45cmx60 cm, 60 cm below ground level as per approved drawing and sign (All the steel work must be TATA/Sail/or any other approved brand)

providing and erecting of retro-reflectorized cautionary, mandatory & informatory sign as per IRC:67 made of high intensity encapsulated lens type reflective sheeting vide cl.801.3, fixed over aluminium sheeting, 2mm thick with area an angle iron of 25X25X4 mm supported on mild steel angle iron post 75x75x6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45cmX45cmx60 cm, 60 cm below ground level as per approved drawing and sign (All the steel work must be TATA/Sail/or any other approved brand) . (ii) 60 cm equilateral tringle.

providing and erecting of retro-reflectorized cautionary, mandatory & informatory sign as per IRC:67 made of high intensity encapsulated lens type reflective sheeting vide cl.801.3, fixed over aluminium sheeting, 2 mm thick with area an angle iron of 25X25X4 mm supported on mild steel angle iron post 75x75x6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45cmX45cmx60 cm, 60 cm below ground level as per approved drawing and sign (All the steel work must be TATA/Sail/or any other approved brand) . (iii) 60 cm circular

providing and erecting of retro-reflectorized cautionary, mandatory & informatory sign as per IRC:67 made of high intensity encapsulated lens type reflective sheeting vide cl.801.3, fixed over aluminium sheeting, 2mm thick with area an angle iron of 25X25X4 mm supported on mild steel angle iron post 75x75x6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45cmX45cmx60 cm, 60 cm below ground level as per approved drawing and sign (All the steel work must be TATA/Sail/or any other approved brand) . (iv) 80cm x 60 cm rectangular

Planting of Trees and their Maintenanace for one year (Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground , mixing the soil with decayed farm yard/sludge mannure , planting the saplings, backfilling the trenches, watering, fixing the tree guard and maintainning the plants for one year.