Construction of Anganwadi Building Centre No. 405 at Devandra street in ward no. 78, coimbatore corporation. Roc.No.2678/2022/MD4

Amount

Dismantling the damaged stones masonry as per Instruction of departmental officers..including all initial lead and lift etc complete.

Dismantling the damaged Brick wall as per Instruction of departmental officers..including all initial lead and lift ete complete. .

Earthwork excavation in all soils including all initial lead and lift ete complete.

Centering with ms sheet sides and supports for Lintel & beams including all cost cte complete

Centering with ms sheet sides and supports for 4 R.C.C Column including all cost ete complete

Centering with ms sheet sides and supports for \ Roof slab &beams including all cost cte complete

R.C.C 1:1/2:3 mix using 20 mm hbg metal | _ including all cost etc complete

Supply and fabrication of RTS Rods at various dia including all necessary cutting , bending and tying etc complete

Filling with well gravel in basement level in all | soils including all initial lead and lift etc complete.

Providing plain cement concrete 1:4:8 using 40mm hbg metal including all cost ete complete

Brick work in c.m.1:5 mix using second class table: moulded bricks including all cost etc complete.

Plastering for RCC exposed surfaces, such as sunshade, beam, Roof ceiling, plastering 1:3 to 10mm thick including all cost etc complete.

Plastering in CM 1:5 to 12 mm thick incuding all cost etc complete.

Daddoing the walls with first quality colour glazed tiles of 1S0X150X6 mm laid in cement mortar 1:2 mix to 10mm thick and painting with white cement using 0.40 kg/1m2 including finishing the jointing and painting flush with tiles surface ete., complete - 10 m2

Paving the floor with Vitrified Floor Piles of sive 60 X 60cm of approved brand and colour Marbdonite tiles in all floors base layer of coment mortar 1:3 (one coment and three sand) 20mm thick using first quality Marbonite tiles of sive 60 X 60cm and

Flooriag finishing with first quality design ceramaic tiles of all colours of size 305cm X 30Sem X 6mm taid in coment mortar 1:3 mix to 20mm thick and painting with white cement using 0.30 kg/tm2 including finishing the jointing and painting Qush with tiles surface etc., complete 10 m2

Solid PVC door shutter using 19 Gauge 19mm MS square tubes for styles and outcr frames. 1Smm MS square tubes for top lock and bottom rails. The steci tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC shects for pancling shall rigidly fix in position including mecessary furniture and fittings. The cover all size of top rail, Lock rail and bottom rail shall be 70mm x 45mm, with suitable rcbate for housing the shutter.

Supply and erccting GI Door and windows with ISImake of approved size and section using 18 GI sheets. Theshutter shall be paintcd with once coat of red oxide primer and the ratc is inclusive of hood covers, transportation charges etc.,

Supplying and fixing in position of Indian make colour waterclioset of size in 580mm * 440mm weight giussed ecarthan ware of approved with P Trap (or) S Trap and foot rest and filling all round the closet using 20mm broken brick jally in 10cm thick and plaster in c.m, 1:3 12 mm thick including fixing in position leveling complete with necessary connection as per standard specification

Supplying and fixing of position of Indian make white glazed earthwere wash basin 550mm x 400mm with all accessories such as cost lron brackets, 32mm dia C.P. Waste coupling, Rubber plug and chain, 32mm dia ‘'B' class, Gi... Waste Pipe, 15mm dia, G.M.Wheel valve, 15mm dia Nylon connection, 15mm dia Brass Nipples, 15mm C.P. pillar tap etc.,

Supply of P.V.C pipes and specials of approved quality including all cost etc complete

110mm ida P.V.C pipes 6kg/cm2

110mm dia P.V.C elbow

Painting with cnamel paint two coats over one coat of primer coat for iron doors layer by layer with cqual intervals using good quality approved colour paint including all cost ctc complete.

Conveyance of excavated carth and dismantled depreeze from site to 15 km including all cost etc complete

Supply and run of 2 of 4 sq mm(56/.3) PVC insulated SC unsheathed Cu.Conductor of 1100 v Grade in suitable PVC rigid pipe on wall and ceiling with continuous carth wire connection of 14 SWG TC wire with painting of suitable colour.

Wiring with 2x1.5sq.mm (22/3.0) PVC insulated unsheathed single core unsheathed copper Conductorcable of 1100V grade in suitableheavy | gauge MIS conduit pipeon wall and celling with M.S accessories inflush with wall with 150mm x 100mm x 75mm MS swithbox with 3mm thick hylum sheet cover for 5A 3pin non interlocking CS plug with continuos earth wire connection of 14S WG TC wire and making good of the concealed portion with suitable colour for concealed plug point.

Wiring with 2x1.Ssq.mm (22/3.0) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessorie in flush with wall with 3mm thick hylum sheet cover with TW switch box and SA switch with continous earth wire connection of SWGTC wire for making good of the concealed portion with suitable colour for PVC open light/Fan Point (For electronic regulator) (5 Points per coil)

Supply and fixing of Double pole 32 Amps MCP 240V/415 V 50 HZ-AC supply on suitable TW board including all cost ete complete.

Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condenser with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from

Painting with emulson two coats for walls layer by layer with equal intervals of time using good quality approved color paint including all cost etc complete

Supply and fixing of 1.20m dia RCC rings thicknes .08m as per instruction of departmental officers including all initial lead and lift etc complete

Supply and fixing of 1.20m dia RCC SL AB thickness 0.10m as per instruction of departmental officers including all initial lead and lift etc complete

Supply of 180mm dia OD PVC preferated type casing pipe 6kg/cm2 with suitable wall thickness including the cost of coupling etc complete

S.Sudhagar