Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹77.7 CrAccepted-AOC | ₹77.7 Cr Quoted ₹78.4 Cr | L1 | Accepted-AOC Qualified L1 AOC |
| 2 | L2₹81.3 CrRejected-Finance THIRD FLOOR AMIT CRYSTAL SENAPATI BAPAT ROAD PUNE 411 016 | PUNE | PUNE | MAHARASHTRA | 411016 | ₹81.3 Cr | L2 | Rejected-Finance Not L1 Hence Reject Tender |
| 3 | L3₹83.5 CrRejected-Finance | ₹83.5 Cr | L3 | Rejected-Finance Not L1 Hence Reject Tender |
| 4 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| 5 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹70.0 Cr
EMD Value
₹35 L
Closing Date
10 Aug 2022, 6:55 pmClosed
Executive Engineer, Public Works Division, Pune 1.
Executive Engineer, Public Works Division, Pune 1.
11-1 - Construction of Court Annex Building and Parking Building at District Court Campus Shivajinagar Pune 5. (Including Electrical Work.)
2022_PWDRP_815632_1
E-Tender Notice No. 11 for 2022-2023 (CourtPune)
Open Tender
Civil Works - Buildings
725 days
District Court Shivajinagar Pune 5.
Please refer Tender documents.
2 documents required · 2 mandatory
₹5,600
₹35 L
Chief Engineer, Public Work Region, Pune 1.
11 Feb 2023
7 Jul 2022
12 Aug 2022
7 Jul 2022
10 Aug 2022
7 Jul 2022
26 Jul 2022
Amount
Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (upto 1.50 meters) By Mechanical Means
Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means
Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.) By Mechanical Means
Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (Lift from 1.5m To 3.0 m.) By Mechanical Means
Excavation for foundation in Hard-rock by controlled blasting including trimming and leveling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres. from the building area including dewatering and back filling with available earth soil /murum watering, ramming etc. complete. (lift upto 3.00 meters to 4.50 meters) By Mechanical Means
Excavation for foundation in Hard-rock by controlled blasting including trimming and leveling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres. from the building area including dewatering and back filling with available earth soil /murum watering, ramming etc. complete. (For all leads and lifts) By Mechanical Means
Providing soling using 80 mm size trap metal in 15cm. Layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.(only Labour Rate)
Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete.
Dewatering on BHP basis by using water pump including diversion of stream, providing coffer dams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)
Conveying building Excavated material upto 10 KM from work site including loading & unloading etc complete
Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper. Basement Floor
Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper. Basement Floor
Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 mm depth, filling the joints with 6 mm size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete ) Basement Floor
Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 mm between rough shahabad and R.C.C. walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 mm and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete) Basement Floor
Providing and applying a base coat comprising of 1KilogramPolydee-MC and 1Kilogramfresh cement after wetting the surface followed by drying the surface for 2 days, apply primer coat of TP-40 and after drying, applying Polydee-11 two component (mixing ratio 2 A : 1 B) ) Antibacterial food grade coating inside drinking water tank in two coats with time interval of minimum 8 hrs. covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etc. complete. Basement Floor
Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Basement Floor
Ground floor
Providing and laying insitu cement concrete M 20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4 mm wide and 20 mm deep with necessary refilling with bitumen etc.complete. Basement Floor
Ground floor
First floor
Second floor
Third floor
Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Basement Floor
Ground floor
Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabledconcrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Basement Floor
Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Basement Floor
Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Basement Floor
Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing and laying Cast in situ/Ready Mixcement concrete M-40 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing and laying Cast in situ/Ready Mix cement concrete in M-40 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Basement Floor
Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing and laying Cast in situ/Ready Mix cement concrete in M-40 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Basement Floor
Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Basement Floor
Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing and fixing inposition to the exact profile and prestressing the high tensile strands to specified ultimate strength, standard end anchorages, cable ducts, grouting ducts after prestressing and bearing plates with wedges as per detailed drawings including necessary plant and machinery for prestressing etc. complete. Ground floor
First floor
Second floor
Third floor
Fourth floor
Joints on Floor - Horizontal Slab to Slab - Expansion joint. Suitable for Pedestrian Traffic Movement. Gap OF 150 mm to be treated with Two Level EPDM and 40mm SLOTTED ALUMINIUM PLATE. Scheme of arrangement is as per Drawing Attached. (350mm x 6mm Thick) Basement Floor
Ground floor
First floor
Second floor
Third floor
Joints on Terrace . Horizontal Slab to Slab (upstand or Parapet) - Expansion joint. Suitable for Pedestrian Movement. Gap of 150mm to be treated with Two Level EPDM and 40mm SLOTTED ALUMINIUM PLATE. ( 350mm x 2mm Thick) Third floor
Fourth floor
Vertical Joints in Interior Columns - Vertical Column to Column Expansion joint (Internal Face). Gap OF 150 mm to be treated with 40mm SLOTTED ALUMINIUM PLATE . (300 x 2mm) Basement Floor
Ground floor
First floor
Second floor
Third floor
Fourth floor
Vertical Joints in Exterior Columns - Vertical Column to Column Expansion joint (External Face). Gap OF 150 mm to be treated with 40mm SLOTTED ALUMINIUM PLATE . Vertical Joints in Exterior Columns (EPDM + Slotted Aluminium Plate 300mm x 2mm thick) Basement Floor
Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in Half brick thick wall including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing coursed rubble masonry second sort of trap/granite/quartzite/gneiss stones in cement mortar 1:6 in external walls of plinth including bailing out water manually, striking joints inside and raking out joints from outside and watering etc.complete. Ground floor
Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. Ground floor
Providing 38 cm thick Composit masonary corner stone with 23 centimeter thick ashlar fine tooled /close punched/chisel dressed masonary of trap/granite/ quartzite/gneiss stones of size (0.45m (L) x 0.30m (H) and minimum thickness of 0.23m) in cement mortar 1: 6 in superstructure including striking joints watering and scaffolding complete for facing and 15 centimeter thick Autoclaved Areated Concrete Blocks of Ecolite or equivalent mech. of size (600x150x150)mm in masonry in extra fine jointing mortar of fixoblock of UltraTech or equivalent for backing including 2mm sunk pointing nessesary through stone and proper interlocking as shown in drawing, in superstructure including striking joints, raking out joints, watering etc. Complete. Specification: As Directed by Engineer In Charge. - Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing 38 cm thick Composit masonary with 23 centimeter thick ashlar fine tooled /close punched/chisel dressed masonary of trap/granite/ quartzite/gneiss stones of size (0.40m (L) x 0.15m (H) and minimum thickness of 0.23m) in cement mortar 1: 6 in superstructure including striking joints watering and scaffolding complete for facing and 15 centimeter thick Autoclaved Areated Concrete Blocks of Ecolite or equivalent mech. of size (600x150x150)mm in masonry in extra fine jointing mortar of fixoblock of UltraTech or equivalent for backing including 2mm sunk pointing nessesary through stone and proper interlocking as shown in drawing, in superstructure including striking joints, raking out joints, watering etc. Complete. Specification: As Directed by Engineer In Charge. - Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing, supplying and fixing Ashlar fine Basalt Stone Coping of size 0.30m (L) x 0.45m (W) & 0.18m (H) in Cement mortar 1:1 proportion, fixing on Stone wall, The stones shall be fine - tooled, with chisel drafts and chamfered as shown in the given drawing including all necessary labour and machinery, finishing, cleaning, lead, lift etc. complete. As per Drawings, specification: As Directed by Engineer In Charge. - First floor
Second floor
Third floor
Providing and fixing Ashlar Fine, Heavily carved Basalt stones- like Arch and Vault stones, String courses, Cap stones, Cyma Recta band of size 0.45m L x 0.85m W x 0.35m H in Cement mortar 1:1.5 proportion; setting with Cement mortor 3mm thick. The stones shall be dressed full or to template. The exposed faces of the stone shall be fine chisel - dressed, and all joints shall be in line and close and not more than 3MM thick. Including all necessary labour and machinery, cranes, props and planks for supports, finishing, cleaning, lead, lift etc, complete. As shown in drawing, Specification: As Directed by Engineer In Charge. - Second floor
Third floor
Fourth floor
Providing and fixing Ashlar Fine, Heavily carved Basalt stones- like Arch and Vault stones, String courses, Cap stones, Cyma Recta band of size 0.45m L x 0.70m W x 0.30m H in Cement mortar 1:1.5 proportion; setting with Cement mortor 3mm thick. The stones shall be dressed full or to template. The exposed faces of the stone shall be fine chisel - dressed, and all joints shall be in line and close and not more than 3MM thick. Including all necessary labour and machinery, cranes, props and planks for supports, finishing, cleaning, lead, lift etc, complete. As shown in drawing, Specification: As Directed by Engineer In Charge. - First floor
Fourth floor
Providing Siporex Block masonary of size 650x240x100 mm jointing cement slurry,construct masonary at end and fill the middle open space with crushed siporex block, all necessary labour, transportation, finishing, lead, lift, cleaning etc. complete. As per Drawings, specification: As Directed by Engineer In Charge. First floor
Second floor
Third floor
Fourth floor
Providing and fixing specially crafted Basalt stone lattice work (Stone Jaali) of thickness 50mm and individual panel size 600mm x 600mm as per approved design and drawings including fixing with M.S. Angle L section of size 50mm x 50mm X Thickness 5mm, and gap between two jali fill with 3mm thick cement mortor 1:4 proportion, cleaning, filling joints with approved mortar, one coat of anticorrosive paint and overit two coats of oil painting of approved quality and shade, Including all necessary labour and machinery, finishing, cleaning, lead, lift etc, complete. As shown in drawing, Specification: As Directed by Engineer In Charge. Ground floor
Providing & fixing glass fibre reinforced concrete (GRC or GFRC Jali) of 12mm thickness TS EN 197-1 certified cement, sand which is clean, dry & ready for use silica sand with required granulometry containing more than 96% silica & suitable plasticizer to be used in order to improve process ability, reduce the curing time, obtain a high strenght & a good quality of concrete in the concrete mix with screwing & fastening elements of certified material and make measure deviation in the joints between panels much not exceed the tolerances provided as : (1)panel size ≤3m/deviation of joints ± 2mm, (2) panel size 3m to 6m /deviation of joints ± 4mm, (3) panel size ≥ 6mt/deviation of joints ±6mm. Including all necessary labour and machinery, finishing, cleaning, lead, lift etc, complete. As shown in drawing, specification: As Directed by Engineer In Charge. (GRFC jali) Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 with neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing and applying gypsum plaster (with Gypsum material) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface/ or on newly brick surface (Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. Basement Floor
Ground floor
First floor
Second floor
Third floor
Fourth floor
Grit Finish plaster for stone work: Providing and Applying base plaster of 12 mm thick in cement mortar- 1 : 4 in gray cement and should be sufficiently rough and combed by Nylon brush, freed from all dust, dirt, grease, oil etc, for proper bonding. The base plaster should be cured for 3 to 4 days before applying the Grit Wash Plaster. A homogeneous mix of cement, Screened sand and 10 mm nominal size (Basalt and Marble Chips) stone chippings of approved colour in proportion 1 :½: 2. Water proofing compound be added to the mix @ 2 % by weight of white cement and be mixed homogeneously and mix then be applied on a prepared base surface. White cement slurry shall be applied @ 2 kg/sqm. On base coat before applying a stone grit wash plaster of 12mm thick, alluminium channel of size 10mm x 20 mm used for groove. After the initial setting of about 1 to 2 hours the surface of stone Grit plaster scrubbed and washed out gently with a nylon brush and water. The cement on the surface of stone chips be washed away exposing the aggregates. The plastered surface shall be cured for 14 days. including all necessary labour and machinery, finishing, cleaning, lead, lift etc, complete. As shown in drawing, specification: As Directed by Engineer In Charge. Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing & applying Heritage Surface Texture Flakes plaster to imitate traditional stonework of size 450mm (L) x 300mm (H) in elevation with break joints and 3mm thick joints with top matte coat including Ceramic Flakes, Special glue required, cleaning, scaffolding, etc complete. Ground floor
Providing and applying plaster with plaster of paris in 6mm thickness to previously plaster surface in all position including preparing the surface scaffolding etc. complete. Basement Floor
Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/including ponding test etc. complete. - Third floor
Fourth floor
Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete. - Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete. - Basement Floor
Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 mm thick style to pand freze rail 95x35 thick with lock and bottam rail 195x25 mm thick and panels with out ventilator as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete. Ground floor
First floor
Second floor
Third floor
Fourth floor
DOOR ( Both side Laminated ) - : Providing & Fixing 44 mm thk both side Laminated Door made up of 18mm thk plywood frame covered with 12 mm thk plywood both side of the frame to get required thickness as per architectural design & drawing of CENTURY MAKE COMMERCIAL PLY BWR GRADE (ISI-303) or equivalent make with both side 1.00 mm thk laminate of ROYAL TOUCh or equivalent make confirming to (ISI 2046) with grove, finish with 43 x 10mm BTC lipping & 8mm float glass strip as per drawing is fitted by BTC 20x10mm moulding including all materials brass screw, brass hinges (125 x 12mm) ENOX make mortice lock, door stopper, antitermite treatment to plywood, two oats melamine polish to moulding and lipping, lobour charges as directed by Incharge etc. complete.
Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (With mechanical gear) Ground floor
Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983). Basement Floor
Providing and fixing M.S. grill door 24 Kilogram/Square Metre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc. Ground floor
Providing and Fixing 30 MM thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19 mm for styles and 15 x15 mm for the top and bottom rails, M.S frame shall have a coat of metel primer of approved make and manufacture. M.S frame shall be covered with heat mouled PVC 'C' channel made from 5 mm (+/0.25) thick prelaminated sheet of density 600 Kilogram/cbm ,of size 30mm thickness 70mm width out of which 50mm shall beflat and 20mm shall be tapered in 45? angle on either side forming stiles ; and 5 mm thick ,95 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered in 45 on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered on both sides to form lock rail.Top,bottom and lock rail shall be provided either side of the panel. An additional 5 mm (+/0.25) thick PVC strip of 20 mm width is to be stuck on the bottom side of the ' c ' channel prelaminated paneling of 5 mm (+/0.25) thick PVC sheet to be fitted inside the M.S. frame welded/ sealed to the styles and rails with 5 mm (+/0.25) x 30 mm PVC sheet beading on either side and joined together with solvent cement adhesive etc ,10 mm thickness (5 mm (+/0.25) x 2 nos) 20 mm wide cross Ground Floor.
First floor
Second floor
Third floor
Fourth floor
Fire Door 45mm 1HR FRL (60/60) 3 Criteria - INTEGRITY / INSULATION/ STABILITY WOODEN DOOR - Fire Door Tested in accordance to IS: 3614 Part 2. Providing of Tufwud make 60 min Fire rated doors system duly tested for 3 criteria - Integrity, Insulation and Stability Criteria as per the IS: 3614 Part 2 and BS: 476 part 22 at National Test House, Govt of India laborator and/or with Central Building Research Institute, Govt of India undertaking with standard heating conditions as specified in IS:3614 Part II 1992 and BS: 476 part 20 & 22 1987 to achieve the required integrity, insulation and stability (i.e. to restrict the heat radiation, temperature rise on the non fire side to the maximum of 140° C above the ambient temperature on the exposed surface of the shutter. The fire doors are tested with NCBN technology ("Non Combustible by Nature"). with prior approval of concerned Superitending Engineer. a) Door Frame: Supplying 'Tufwud' brand frames for Fire resistant door shutters 1st class Malaysian Hardwood Frame densified (810 kg/cum) and pressure treated with fire retardant chemicals in vacuum impregnation vessel under 160 psi pressure as per IS:401and kiln seasoned to moisture below 15% as per IS:1141 of section 120 X 60 mm spray quoted with 2 coats of intumescent paint of minimum 200 micron, with single row of Brush- Type ASTROFLAME intumescent strip of size 10mm x 4mm affixed in the slit of the Frame for fire and smoke sealing, etc. complete. Ground floor
First floor
Second floor
Third floor
Fourth floor
b) Shutter : Providing of 65mm thick asbestos free composite - 3 criteria - fire, heat and smoke check Accoustic Door Shutter with flame guard of 120 minutes IS3614 part -II comprising of 2x9mm Calcium Silicate boards, Chemical treated internal timber with Fire retardant chemicals in pressure impregnation vessels under 160 PSI pressure as per IS:401and kiln seasoned to moisture below 15% as per IS:1141 frame work of 100x32 mm with 32mm thick infill of ceramic fiber (density 128Kgs/CMT), vermaculite mix faced with 6mm Fire retardant High Density ply, internally lipped with hardwood beading, and pasted in Hydraulic Press under 50 tonnes pressure, spray quoted with 2 coats of In tumescent paint of minimum 200 micron, and with 1 row of Brush- Type Astroflame® intumescent strip (imported) of size 10mmx4mm concealed for fire and smoke sealing in the grooves in the shutter on all edges except bottom, without any external lipping. Ground floor
First floor
Second floor
Third floor
Fourth floor
c) Vision Panel: 1 HR rated E Class clear high stress fire rated glass is pre fabricated strategically inside the shutter structure with 10 mm inside the shutter on all sides with Uglazing. An additional insulated powdercoated 'Z' channel of 16 swg MS sheet to be fixed for reinforcement of the joints. With clear fire resistant glass panes 11mm thick having minimum 120 minutes fire Description Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing and fixing ISI marked double swing flush door shutters conforming to IS:2202 (PartI) Non-decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel L- hinges with necessary screws Fittings & Fixtures per leaf SS kick plates on both sides of the door of 300mm height Heavy Duty satin finish butt SS Hinges (100mm x75mm x3mm in size)-4 nos. SS finished lever handle with mortise lock- 1 Number Floor spring- 1 Number 100mm x 100mm safety glass at the specified location. Ground floor
First floor
Second floor
Third floor
Fourth floor
Fabrication and supply of Window made of rolled formed sections made of galvanised steel colour coated/ powder coated. Base steel as per IS- 513 'D' galvanised as per IS 277 with zinc coating of 120 g/sq.m. dimensions of section- external frame of 72mm x 55mm x 0.58mm thicknes section for mullion sholud be of 72mm x 50mm x 0.58mm thickness, section for shutter frame should be of 47mm x 20mm x 0.58mm thickness and section for fly mesh should be of 40mm x 20mm x 0.58mm thickness and section for mesh fixing should be 18mm x 6mm x ) 0.58mm Glazed shutter and fixed glass portions should be provided with glass of 4mm thk. Windows must be provided with grill made up of 10mm MS square Bars welded to 6mm x 12mm MS flat. Distance between bars should not be more than 150mm centre to centre . Total grill unit must be powder coated . the glazed shutter must be provided with one set of pivot hinges, handle and latch, gaskets made of EPDM, Corner brackets and Mullion caps made of Nylon/ Propylene .the coating must be of primer coat of epoxy primer of 5-7 microns thk finish painted with a polyester paint of 12-16 microns thk and back coated with alkyde backer of 5-7 microns OR powder coated with pure polyester powder upto 50-60 microns thk, total coated thickness of 0.58mm including all necessary nails, screw and other fastening, all necessary labour, transportation, finishing, lead, lift, cleaning etc, complete. As per Drawings, specification: As Directed by Engineer In Charge. (Weight 10.20 Kg/Sqm) Basement Floor
Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing and fixing pressed metal ventilator for of verious size with louvres fully glazed fixed in a movable and adjustable steel pivot hinges partly fixed as per detailed drawing including powder coating, fabricating glazing with plain /obscured glass panels 5mm thick of approved type and quality and iron oxidized fixtures and As approved by the Architect/ Engineer In Charge including all material, labour cost, lead, lift, etc complete. (Weight 10.20 kg/Sqm) Basement Floor
Ground floor
First floor
Second floor
Third floor
Fourth floor
Heavy duty Steel doors: Fabrication and supply of MILD STEEL DOORS of 1.025m x 2.1m Size with Single Leaf outer frame made of 50x50x5 mm equal M.S.L angle and shutter frame strengthened by stiffeners of 2 Nos horizontal MS. L angle 50x50x5 mm, vertical Bright bars 20mm dia fixing in holes having spacing 70mm centre to centre, fixing Steel door to lockup partion by 1 no aldrop Iron Oxidise 300*16mm with special locking arrangment, 1 nos. of handles iron oxidised 150 mm fixing the shutter with 3 Nos. of hinges iron oxidised 100 mm with outer frame of the door Including all necessary labour, welding, transportation, finishing, lead, lift, cleaning etc, complete. As per Drawings, specification: As Directed by Engineer In Charge. Ground floor
Fire Duct Door: Providing and Installing Fire rated doors of size 0.9 m x 1.5 m constructed from G.I sheet conforming IS 277 standards with min thickness of 46mm infilled with either rockwool/mineral wool/ honeycomb craft paper. 5mm thick clear/wired glass for vision with frame coated with min 60-65 microns primarily of zinc phosphate primer and finished with polyurethane aliphatic grade of epoxy paint as required. Stainless steel ball bearing butt hinges of 0.102m X0.076m size and 3mm thickness. Mortise sash lock with lever handles, mortise dead bolt, mortise latch, panic device as specified. Concealed extended lever actions flush bolts provided on the top of the door to the leading stile edges. Transportation, lead, etc complete. Doors to be in compliance and tested as per IS 3614 Part 2 and BS 476 part 20 & 22. Including all necessary labour, transportation, finishing, lead, lift, cleaning etc, complete. As per Drawings, specification: As Directed by Engineer In Charge. Basement Floor
Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing and fixing Bright bar partitions for Lockup including vertical M.S. Equal L angle 0.05m x0.05m x 0.005m thk. Fixed with horizontal support of M.S. equal angles of size 0.05m x0.05m x0.005m thk placed at 1.05 m c/c welded to vertical post. Perforation to be provided in horizontal supports at 0.070m c/c to place continuous vertical M.S. Bright bars of 20 mm dia welded to horizontal member hole as per diameter of bar, anchoring the partitions into floor and top slab. including all necessary labour and machinery, finishing, cleaning, lead, lift etc, complete. As per Drawings, specification: As Directed by Engineer In Charge. Ground floor
Providing and fixing Strong Room Door With Grill Gate, Size: 2200 X 1220 Mm,1094 X 1167 Mm fixing to the RCC wall, including all locking arrangement, fixtures to the adjoining walls, lead and lifts, transportation, as per Architect's Drawing and instructions of Engineer In Charge. (Mode of Measurement - as per front view) etc, complete. As per Drawings, specification: As Directed by Engineer In Charge. First floor
Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. Basement Floor
Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases ,with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing and laying ceramic tiles of having size 30 cm. x60 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing and fixing machine cut machine polished 18mm to 20mm thick telephone black/Amba White/Catbary brown/ RBIred/ Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. Basement Floor
Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing and preparing kitchen otta up to 75 cm width,made up from 30 mm thick and 75 cm high vertical support for kadppa at 1 m. c/c of 25 mm thick both side polished kadappa middle shelf and bottom of 20 mm thick one side polished kadappa with facia patti of 20 x 50 mm kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning etc. complete. Ground floor
Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing and laying telephone black /Amba White /Cadbury brown/ Rubyred/ Ocean Brown granite stone of 18 to 20 mm thick for door frame /dado /window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. Basement Floor
Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing and laying in place 300mm x300mm x16mm cement tactile directional and warning tiles (for a person with visual impairment) of the approved brand and make and specified colour for outdoor floors such as footpath, courtyard, multimodals location etc. laid on 20 mm thick base of cement mortar 1:4 (1cement :4coarse sand) in all shapes and patterns including grouting the joints with white cement with matching pigments etc. complete as per direction of engineer in charge. Ground floor
Providing and laying in place 300 mm x 300 mm x 9.8 mm vitrified tactile warning and directional tiles of the approved brand, make and colour inside the buildings at in all corridors and lobbies, level differences etc. as per accessibility standards and as per the installation instructions prescribed by the manufacturer including zarrimaking wherever required and finishing including grouting the joints with white cement with matching pigments etc. up to the satisfaction of the engineer in charge complete. Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding / moulding the edges etc. complete. Both side polish. Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete. Basement Floor
Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete. First floor
Second floor
Third floor
Fourth floor
Providing and fixing 90cm x60cm Granite plate engraving 10cm. Height letter, figures including painting the lefters/figures with approved colour and shade complete. Ground floor
Providing and fixing Indian teak wood planking 25mm thick for flooring plained on both sides, tongued and grooved including scaffolding, if necessary, and one coat of primer etc. complete. First floor
Second floor
Third floor
Fourth floor
Providing & fixing Ashlar fine dressed in basalt stone for flooring having size of stone 0.45m x 0.30m and minimum thickness of 0.18m, as per design, size & detailed drawing, from approved source & quality, including transportation & conveyance to specific location, laying at a slope of 1 : 40 in line, level over layer of C.M. 1 : 1 and minimum 50mm thick, with joints not exceeding 3mm thick, watering, curing, to be approved by the Architect and Engineer in charge etc. complete. Ground floor
Providing, supplying and fixing Ashlar fine Basalt Stone Kerbing of size 0.30m (L), 0.50m (H) & 0.15m thick in Cement mortar 1:1 proportion, fixing on bed 50mm thick, The stones shall be fine - tooled, with chisel drafts and chamfered as shown in the given drawing including all necessary labour and machinery, finishing, cleaning, lead, lift etc. complete. As per Drawings, specification: As Directed by Engineer In Charge. Ground floor
Providing and Fixing mat finish stainless steel (of 302 grade) railing with top pipe of 50mm dia. and vertical pipe of 38mm dia at 0.60m c/c or as required and horizontal pipes of 25mm dia in three rows, all pipes of 2mm thick including buffing, fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75mm diameter etc. complete (Prior approval of sample and brand by Ex. Engineer is necessary before use) Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing and fixing 45 cm wide mild steel ladder of 40mm x 6 mm mild steel flat stringers and steps of 18 mm dia. mild steel bar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60cm x 30cm x 30cm and painting the ladder complete. (Anti Corossive Paint) Basement Floor
Third floor
Fourth floor
Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis ,M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/or pointing and/ or applying chemical and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:-(1) The elevational area of the scaffolding shall be measured for payment purpose. (2)The payment will be made once only for execution of all items for such works.
Providing and fixing Mild Steel Railing with M.S. sections as per given design, Panel size 6.05m x 1.05m, MS top, bottom, vertical Hand rail of tube size 50mm x 50mm x 4.5mm, and C.I moulding Section as shown in drawing length 115mm and 838mm height as per design, fixed 100mm inside the floor with MS plate of size 0.12m x 0.12m and 0.012m thick, with Nut Bolts washers 12mm dia, 75mm long to MS plate including hoisting, erecting, fixing in position, making welded connections with one coat of primer and two coats of oil painting etc, complete. As shown in drawing, Specification: As Directed by Engineer In Charge. Basement Floor
Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing and fixing 2 level Mechanical car parking of dimension 5.00mx2.45m including Design of parking system, Supply of product, Transportation to site, Material unloading at site, Installation at the given location as per Parking layout, Testing & Commissioning, Hand-over including all necessary labour and machinery, finishing, cleaning, lead, lift etc, complete. As per Drawings, specification: As Directed by Engineer In Charge. Basement Floor
Ground floor
Atrium roof - Fabrication of the Structure for Atrium Sky Light. Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates, etc. as per detailed design and drawing or as directed by Engineer-incharge including cutting, fabricating, hoisting, erecting and fixing in position, making riveted / bolted / welded connections and one coat of anticorrosive paint and over it two coats of oil painting, etc. complete. (Bd-C-8/278) Providing and Fixing 13.52mm clear laminated tempered glass made of two layers 6mm tempered glass of brand Saint Gobain or equivalent, permanently bonded together with 1.52mm transparent PVB interlayer under a controlled, highly pressurized and industrial heating process. (6+1.52+6 toughened laminate glass) with Anodised Aluminium backing strip and Pressure tape with weather silicone sealant for the skylight including transportation, lifting and hoisting in postion complete, as per the design or as directed by the site engineer. Providing and Fixing 11.52mm clear laminated tempered glass made of two layers 6mm tempered glass of brand Saint Gobain or equivalent, permanently bonded together with 1.52mm transparent PVB interlayer under a controlled, highly pressurized and industrial heating process. (4+1.52+4 toughened laminate glass) with Anodised Aluminium backing strip and Pressure tape with weather silicone sealant for the skylight including transportation, lifting and hoisting in postion complete as per the design. or as directed by the site engineer. Providing and Fixing Galvanised Weld Mesh 50x50 of 4.5 mm MS wire conforming to IS 4948:2002, welded in ISA30303 frames. Fixed under the ventilation gap below the Sky light as per the design or as directed by the site engineer. Design and Supervision Fees Design of the Special Structural Steel Structure conforming to IS 800 and / 801 code and providing fabrication drawings, boq and supervision. Fourth floor
Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/ bolted/ welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. Basement Floor
Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing and fixing European type wall hung white water closet of Parriware / Hindware with push valve concealed type with cover plate 32mm size of including soil pipe, vent pipe upto outside face of wall, 100mm dia G.I. plug bend inlet pipe all fittings, cutting and making good walls, floors etc complete. Spec. No.As directed by Engineer-in-Charge. Ground Floor
First Floor
Second Floor
Third Floor
Fourth Floor
Providing and fixing Orissa Pan of size 580x445x260 mm with approved make flush valve including trap,C.I.soil and vent pipe upto outside face of wall including 100 mm dia.C.I.plug, bend and necessary pipe connection, etc complete. As directed by Engineer in charge. Ground Floor
First Floor
Second Floor
Third Floor
Fourth Floor
Providing and fixing white Wash basin with half pedestal of size 515mm X 615mm X 460mm including pillar cock auto-closing system CP angular stop cock long thread of approved make continental including S.S. bottle trap of necessary pipe connection upto the outside face of the wall. Ground Floor
First Floor
Second Floor
Third Floor
Fourth Floor
Providing and fixing Table top white wash basin of size 120x635x405mm rubber plugs and brass chain, with pillar cock, C.P.Angular stop cock long thread, continental including S.S. bottle trap of approved make having necessary pipe connection up to theoutside face of the wall.etc complete as directed by Engineer in charge. Ground Floor
First Floor
Second Floor
Third Floor
Fourth Floor
Providing and fixing white glazed urinal of size 710 x 460 x 300mm with sensotronic concealed type flushing valve for urinal with complete kit having fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32mm diameter P.V.C. flush pipe with fitting and flushing arrangement including lead soil pipe, lead trap & soil pipe connection upto the outside face of wall etc complete. Ground Floor
First Floor
Second Floor
Third Floor
Fourth Floor
Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. Ground Floor
Providing and fixing C.P. Angular stop clock with wall flange of approved make continental including necessary sockets/union nut etc. complete. Spec No: As directed by Engineer in charge. Ground Floor
First Floor
Second Floor
Third Floor
Fourth Floor
Providing and fixing C.P. sink cock with raised J" shaped swinging casted spout ofapproved make including necessary sockets/ union nut etc. complete."Spec No: As directed by Engineer in charge Ground Floor
Providing and fixing C.P. 2 Way BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge. Ground Floor
First Floor
Second Floor
Third Floor
Fourth Floor
Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. Ground Floor
First Floor
Second Floor
Third Floor
Fourth Floor
Providing and fixing Hand shower (health faucet) with 8mm dia. 1m long flexible tube having wall hook with approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge. Ground Floor
First Floor
Second Floor
Third Floor
Fourth Floor
Providing and Fixing toilet set for differently Abled persons consist of Floor Mounted white vitreous china water Closet including 6 litre capacity white vitreous china flushing Cistern with raised soft-push button, white vitreous china wash basin of size 46 x 36 cm and one no SS 304 hinged rail 76 cms & three no SS 304of (Grab Bar) 60 cms all including cutting and making good the walls and floors wherever required ,seat cover, cistern & wash basin fittings,nuts, bolts and gasket etc complete as per the direction of Engineer-In charge. Ground Floor
First Floor
Second Floor
Third Floor
Fourth Floor
Providing and fixing 75 mm dia stabilizer pipe / P.V.C. soil vent / waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. (As per IS 13592-1992 Type B, 6 kg/sq.cm pipes are recommended for use in soil and waste discharge system) Ground Floor
First Floor
Second Floor
Third Floor
Fourth Floor
Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. Ground Floor
First Floor
Second Floor
Third Floor
Fourth Floor
Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. Ground Floor
First Floor
Second Floor
Third Floor
Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. Basement Floor
Ground Floor
First Floor
Second Floor
Third Floor
Fourth Floor
Providing and fixing 15 cm rigid uPVC Nahani trap (Multi Floor traps, water seal not less than 50 mm) including bend, connectingpiece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use) Ground Floor
First Floor
Second Floor
Third Floor
Fourth Floor
Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Ground Floor
First Floor
Second Floor
Third Floor
Fourth Floor
Providing and fixing on walls/ceiling/floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Ground Floor
First Floor
Providing and fixing on walls/ceiling/floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Ground Floor
First Floor
Second Floor
Third Floor
Fourth Floor
Providing and fixing on walls/ceiling/floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Ground Floor
First Floor
Second Floor
Third Floor
Providing and fixing on walls/ceiling/floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Ground Floor
First Floor
Second Floor
Third Floor
Fourth Floor
Providing and making ISI Mark ferrule connection of 50 mm dia. to water main including ferrule coupling cast iron bell mouth cover, built in non return valve and fixing including excavation and reinstatement complete.
Providing and fixing screw down for 32 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. Ground Floor
First Floor
Providing and fixing screw down for 40 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. Ground Floor
First Floor
Second Floor
Third Floor
Providing and fixing screw down for 50 mm dia. wheeled stop tap of brass including necessary sockets/ union nut complete. Ground Floor
First Floor
Second Floor
Third Floor
Fourth Floor
Providing and fixing screw down for 65 mm dia. wheeled stop tap of brass including necessary sockets/ union nut complete.
First Floor
Second Floor
Third Floor
Fourth Floor
Providing and fixing screw down for 80 mm. dia. wheeled stop tap of brass including necessary sockets/union nut complete. Third Floor
Fourth Floor
Providing and fixing 50mm diameter water meter with non-return valve including strainer, sockets/ union nut and including water meter box making locking arrangement and lock. [without chamber]
Providing and fixing 40 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete.
Providing , constructing and fixing 250 mm dia. Inspection chamber made up of UPVC material of thickness 3.5 mm and height of 259 mm with inlet and outlet of 110 mm dia. with 75 mm dia. U Trap, Ultra shaft pipe of Upvc material having height of 470 mm and fixing Ultra 250 mm dia. UPVC cover and frame in 150 mm thick in c.c.1:2:4, having crushed sand bed of 100 mm thick of size 550 mm dia. Including excavation and refilling the sides of chamber by crushed sand cushioning 150 mm thickness, connecting all required UPVC fittings with rubber lubricant etc. complete
Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap.
Providing and laying concrete pipes of I.S.NP. class of 150mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.
Providing and laying concrete pipes of I.S.NP. class of 225mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.
RWH - Recharge Pit Providing and constructing recharge pit of 2.0m deep and 1.0m dia of pre-cast RCC rings with 6.5' dia x 25m deep borewell at the floor of recharge pit including installation of combination of solid/perforated PVC casing pipe wrapped around with netlon mesh including 300mm thick sidefilling around outside of RCC rings (annular space) with 40mm size boulders including filling of recharge pit up to 0.5m depth with 25-75mm clean washed gravels from bottom up followed by 0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs, PVC end-caps, fittings etc. including arrangement for inlet & outlet pipe excavation & backfilling as shown in the drawing.The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge.
Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete.
Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete.
Providing and constructing on sewer, B.B. masonry circular manhole with concentric cone 1.2 M dia. at bottom and 0.5 M dia. at top and upto a depth of 2.00 M with 23 cm brick work in CM 1:4 proportion excluding excavation including foundation concrete 250 mm thick and haunches and channels in C.C. 1:2:4 proportion, finishing channels in smooth rendering, providing C.I. dapuri type steps each weighing 5.5 kg., 1:2:4 coping and providing and fixing approved make and quality SFRC frame and cover of 56 cm dia.etc. complete as directed by Engineerin-charge.
Providing and constructing on sewer, B.B. masonry circular manhole concentric cone 1.5 M dia. at bottom and 0.5 M dia. at top and upto a depth of 5.00 M with 23 cm brick work, upto depth of 2 M from top and 35 cm thick brick work for balance depth in CM 1:4 proportion with 20 mm thick smooth plaster on both sides in CM 1:2 proportion excluding excavation including foundation concrete 250 mm thick and haunches and channels in C.C. 1:2:4 proportion, finishing channels in smooth rendering, providing C.I. dapuri type steps each weighing 5.5 kg., 1:2:4 coping and providing and fixing approved make and quality FRP (Fibre-reinforced plastic) frame and cover of 56 cm dia. etc. complete as directed by Engineerin-charge.
Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes of 65mm nominal outer dia pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. First Floor
Second Floor
Third Floor
Fourth Floor
Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes of 80mm nominal outer dia pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. Third Floor
Fourth Floor
Providing and laying perforated PVC 160 mm dia pipe in proper line,level and slope including necessary material fitting etc. complete.
Providing and fixing Mist System, including Pressure Pump, Control Panel with timer, SV Valve, Filter, SS Pipe,304,3/8 OD, Nozzles, Pressure Gauge, 3/8 OD PA (Nylon 12) Pipe, 3/8 Size SS union with ferrule, 3/8 Size SS Tee, 3/8 Size SS Elbow, Stopper, Adopter, Hardware, Filter Cartridge, Cooling System Installation, Transportation, lead lift etc. complete. spe: As Directed by Engineer In Charge.
Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. Basement Floor
Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area. wall primer with brush by adding mineral turpentine oil by 8 to 10% or water by 15 to 20% allowing to dry for 6 to 8 hours After applying acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45% or 65 to 70% by roller. (With prior approval of S.E.) Basement Floor
Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing and applying 2 Coats of 100% Pure acrylic water based paint with special heat reflectance property to withstand the harsh climate for period of atleast 10 years of approved make. Paint system should provide durable and long lasting finish with DFT of min 90 microns and should protect against concrete carbonation with R value of minimum 600 and equivalent concrete layer thickness value of min 150 cm. Paint should have breathability property and should be able to cover hairline cracks in the surface upto 0.5mm The paint has to be applied on a coat of high quality acrylic copolymer based alkali resistant primer with excellent penetrating properties including cleaning, with all leads and lifts at all levels etc complete, as directed by Engineer in charge. Third floor
Fourth floor
Rubberwood Signage : Providing and Fixing Signage on 24 MM thick Rubberwood as per the given size and design, (with edge moulding as per given design made within the cross - section thickness of the wood plank), by engraving or etching guided by a laser machine. The cost includes, cutting the base panel to required size and shape, forming the given design (including lettering of given height and surrounding floral or geometric design) and filling it with 2 coats of black or rust - brown oil paint, finishing the entire panel with 'Touchwood' or equivalent brushable clear wood finish and two coats of lacquer, packaging, transportation to site, fixing at the given location on stone or brick wall with S.S. Screws, all taxes, lead, lifts etc, complete. As shown in drawing, specification: As Directed by Engineer In Charge. (Name board Signage) Ground floor
First floor
Second floor
Third floor
Fourth floor
Design, fabrication, supply, and fixing of Signage board for the Main Court Building, as per the approved design and make, having Aluminium die-cast letters 18" fitting in Marathi Name जिल्हा व सत्र न्यायालय ,पुणे and English name District and Session Court,Pune including Duco paint on letters. Signage to be installed at a height of 23m from the ground level, including all fitting, materials, lead, lift, tools, scaffolding or crane, excluding GST etc, complete. As shown in drawing, specifications: As Directed by Engineer In Charge. Fourth floor
Providing and fixing Wooden plank for door jamb of 12 mm thick Teak wood with polish (Minimum sizes of doors 1.2m x 2.4m long) including all necessary nails, Melamine Polish, labours, transportation, finishing, lead, lift, cleaning etc, and teak wood moulding BTC patti 75mm width x 12 mm thick complete. As per Drawings, specification: As Directed by Engineer In Charge. Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing & fixing wall paneling made of 12mm thick plywood fixed on wooden grid work of section 50mmx50mm spaced at 610mm, c/c both ways & covered with 4mm thick veneer including melamine polish etc complete as approved & directed by Architect First floor
Second floor
Third floor
Fourth floor
Medium Back Chair -Providing and supplying Medium Back Chair With Frame in MS, PU Foam in Back and Moulded PU Seat, PU Arms with PU Cladding, Synchronized multi Lock Mechanism, Chrome Base and Gas Lift. etc. Complete As diected by Engineer in charge. First floor
Second floor
Third floor
Fourth floor
Visitors Chair -Providing and supplying Chair With 12 mm thick moulded ply and cushion on seat and back, Frame in M.S. oval pipe of 16g duly powder coated PU cladding on both side arms etc. Complete As diected by Engineer in charge. Ground floor
First floor
Second floor
Third floor
Fourth floor
High Back Chair - Providing and supplying High Back Chair, Chair in Moulded ply with Head Rest, Double Cladding, High Density PU Foam in Seat and Back, Alluminium Arms and Cushion on it, Central Tilting Mechanism, Chrome Base and Gas Lift etc. Complete As diected by Engineer in charge. First floor
Second floor
Third floor
Fourth floor
Medium Back Chair - Providing and supplying Medium Back Chair, Chair with Moulded ply of 12mm thick, PU foam in back, Moulded PU seat, ''T'' Adjustable Arms with PP Pad, Nylon Base, Synchronized Mechanism with single lock and Gas Lift etc. Complete As diected by Engineer in charge. Ground floor
First floor
Second floor
Third floor
Fourth floor
Three Seater Sofa - Providing and supplying Frame in hardwood fully Cushioned in seat and back, with arms, Stainless steel Square legs at the base, Three seater sofa - 1810mm W x 750mm D x 750mm H, Armrest 80mm- Seat 550mm, etc. Complete As diected by Engineer in charge. First floor
Second floor
Third floor
Fourth floor
STENO TABLE and CLARK TABLE - Providing and fixing Table at court hall having size 2.0m x 0.80m and Height 0.75m made up of 18 mm thick Century make commertial ply BWR grade (IS-303) frame work with all side covered with 1.00 mm thick Laminate and inside with 0.80mm thick white laminate, Drawers shall make in 12 mm thick plywood with laminate inside shall be provided, necessory Fevicol, Anti termiete treatment, Nalis, Abro tape, Drawer Channel 24'', S.S. Handle 4'', S.S. Hinges 3'' x 1'' x 1'', Lock Drawer, Ball Catch S.S., Cable Manger etc. complete as per drawing and design. As diected by Engineer in charge. First floor
Second floor
Third floor
Fourth floor
JUDGES TABLE - Providing and fixing Table at court hall having size 3.86m x 0.80m and Height 0.80m made up of 18 mm thick Century make commertial ply BWR grade (IS-303) frame work with all side covered with 1.00 mm thick Laminate and inside with 0.80mm thick white laminate, Drawers shall make in 12 mm thick plywood with laminate inside shall be provided, necessory Fevicol, Anti termiete treatment, Nalis, Abro tape, Drawer Channel 24'', S.S. Handle 4'', S.S. Hinges 3'' x 1'' x 1'', Lock Drawer, Ball Catch S.S., Cable Manger etc. complete as per drawing and design. As diected by Engineer in charge. First floor
Second floor
Third floor
Fourth floor
TABLE IN JUDGES CHAMBER - Providing and fixing Table having size 3.0m x 0.80m and Height 0.80m made up of 18 mm thick Century make commertial ply BWR grade (IS-303) frame work with all side covered with 1.00 mm thick Laminate and inside with 0.80mm thick white laminate, Drawers shall make in 12 mm thick plywood with laminate inside shall be provided, necessory Fevicol, Anti termiete treatment, Nalis, Abro tape, Drawer Channel 24'', S.S. Handle 4'', S.S. Hinges 3'' x 1'' x 1'', Lock Drawer, Ball Catch S.S., Cable Manger, labours, etc. complete as per drawing and design. As diected by Engineer in charge. First floor
Second floor
Third floor
Fourth floor
FOOT REST - Providing and fixing Foot Rest at court hall having size (0.78m x 0.78m) and height 0.10m made up of 18 mm thick Century make commertial ply BWR grade (IS-303) frame work with all side covered with 1.00 mm thick Laminate, necessory Fevicol, Anti termiete treatment, Nalis, Abro tape, labour, etc. complete as per drawing and design. As diected by Engineer in charge. First floor
Second floor
Third floor
Fourth floor
WRITING DESK -Providing and fixing Writing desk having size (0.53m x 0.46m x 0.30m) made up of 18 mm thick Century make commertial ply BWR grade (IS-303) including exposed surface covered with 1.00 mm thick Laminate Front side design as per detail drawing, inside 0.8 mm thick white laminate with necessary hardware, labour including Anti-termiete treatment etc. complete. as per drawing and design. As diected by Engineer in charge. First floor
Second floor
Third floor
Fourth floor
WITNESS BOX - Providing and fixing witness box of size 1.20 m x 2.4 m x 0.15m with vertical and horizontal and sloping surfaces made in 0.018m thk commercial BWR Plywood with the hand rail made up of T.W. section of (0.06m x 0.07m)and balusters of size 0.065m X 0.065m X 0.80m, with vertical supports to horizontal and sloping surfaces at edges and in middle in 0.018m thk commercial plywood. The exterior surfaces of the plywood box must be finished in 1mm thk decorative laminate and internal surfaces should be finished in 0.8 mm thk white laminate and BTC patti edging including all necessary labour, lift, material, equipment as per directed by architect and engineer incharge etc, complete. First floor
Second floor
Third floor
Fourth floor
ACCUSED BOX - Providing and fixing Accused box of Size 1.32 m x 2.44 m x 0.15m with vertical and horizontal and sloping surfaces made in 0.018m thk commercial BWR Plywood with the hand rail made up of T.W. section of and balusters of size 0.065m X 0.065m X 0.80m, Step in 0.018m thk plywood, with 3 nos vertical supports in 0.018 thk commercial The exterior surfaces of the plywood box must be finished in 1mm thk decorative laminate and internal surfaces should be finished in 0.8 mm thk white laminate including all necessary labour, lift, material, equipment as per directed by engineer/architect incharge etc, complete. First floor
Second floor
Third floor
Fourth floor
Court Hall Storage- Providing and fixing Size of 20.62 x 3.10 m storage on site 40 cm deep and 3.10 m in height Full height storage unit made out of 18 mm thick commercial plywood for all sides, shelves, frame and internal verticals, horizontal divisions ixcluding back side, with all necessary hardware, fixtures and fastenings, BTC patti of size 25mm x 12 mm for all exposed edges.The unit shall be finished with fixing of 4 mm thick veneer for shelves. Antitermite treatment to all plywood and woodwork. All exposed lipping (BTC) shall be finished with mellamine polish as per Architect's Drawing and as diected by Engineer in charge.Complete. First floor
Second floor
Third floor
Fourth floor
LOW HEIGHT STORAGE Type A (Ht: 1.2m)- Providing and fixing Low Hight storage having depth 0.85m made up of 18 mm thick Century make commertial ply BWR grade (IS-303) make as per Architectural Design and Drawings and finish with all exposed surface covered with 1.00 mm thick Laminate and inside surface finish with french polish including BTC lipping, brass hinges, brass screws, SS handles, magnet, melamine polish to moulding/lipping and termiete treatment to plywood etc. complete as per drawing and design. As diected by Engineer in charge. First floor
Second floor
Third floor
Fourth floor
LOW HEIGHT STORAGE Type B (Ht: 1.2m)- Providing and fixing Low Hight storage having depth 0.45m made up of 18 mm thick Century make commertial ply BWR grade (IS-303) make with 12 mm thick Century Commertial ply BWR Grade (IS-303) front leaf as per Architectural Design and Drawings and finish with all exposed surface covered with 1.00 mm thick Laminate and inside surface finish with french polish including BTC lipping, brass hinges, brass screws, SS handles, magnet, melamine polish to moulding/lipping and termiete treatment to plywood etc. complete as per drawing and design. As diected by Engineer in charge. Ground floor
First floor
Second floor
Third floor
Fourth floor
Full height storage - Providing and fixing Low Hight storage having depth 0.45m, 1.4m length and 3m height made up of 18 mm thick Century make commertial ply BWR grade (IS-303) as per Architectural Design and Drawings and finish with all exposed surface covered with 1.00 mm thick Laminate and inside surface finish with french polish including BTC lipping, brass hinges, brass screws, SS handles 12 cm, 3'' brass tower bolt, magnet, melamine polish to moulding/lipping and termiete treatment to plywood etc. complete as per drawing and design. As diected by Engineer in charge. Ground floor
First floor
Second floor
Third floor
Notice Board - Providing and fixing Notice board having depth 0.13m made up of 18 mm thick Century make commertial ply BWR grade (IS-303) as per Architectural Design and Drawings and finish with all exposed surface covered with 1.00 mm thick Laminate and inside surface finish with french polish including 12mm soft wood on 18mm ply glued and bolted with 8mm thk clear glass with lock etc. complete as per drawing and design. As diected by Engineer in charge. First floor
Second floor
Third floor
Fourth floor
Judges's Mirror - Providing and fixing size of 0.90 x 1.90, 6mm thick pollished mirror with hook for Judge. Made up of 18 mm thick Century make commertial ply BWR grade (IS-303) and 12 mm thick Century Commertial ply BWR Grade (IS-303) frame chamfered at internal edge with 4.00 mm thick Veneer on exterior surface, 6 mm Thick Mirror, necessory Fevicol, Anti termiete treatment, Nalis, 2 way tape, labour, etc. complete as per drawing and design. As diected by Engineer in charge. First floor
Second floor
Third floor
Fourth floor
DIAS PARTITION - Providing and fixing Plywood partition of 75mm thk with frame made up of 2x 18mm thk commercial plywood members (ISI-303) @ 0.6m x 0.6m c/c and 12mm thk commercial plywood (ISI-303) on face finished with 4mm thk veneer conforming to (IS 1328) treated with antitermite treatment on both sides as per architectural design and drawings including all materials, labour, hardware as directed by architect and engineer incharge, etc., complete. First floor
Second floor
Third floor
Fourth floor
OFFICE TABLE - Providing and fixing office Table having size (1.2m x 0.72mx 0.75m) made up of 18 mm thick approved make commertial ply BWR grade (IS-303) including exposed surface covered with 1.00 mm thick Laminate externally and inside with 0.80mm thick white laminate, all lipping finish with melamine polish as match as laminate colour.Exterior of drawer with S.S. handel 4" long and supported on S.S. channels 24 ". inside of drawer finished in white laminate. Ground floor
First floor
Second floor
Third floor
Fourth floor
LAWYERS TABLE - Providing and fixing Lawyers Table at court hall having size (2.5MX 0.75mX0.85m) made up of 18 mm thick approved make commertial ply BWR grade (IS-303) including exposed surface covered with 1.00 mm thick Laminate externally and inside with 0.80mm thick white laminate, all lipping finish with melamine polish as to match laminate colour. Supported on teakwood frame of legs and frames of Cross section 0.065m x 0.065m with anti-termite treatment and melamine polish finish etc. complete as per drawing and design. As diected by Architect or Engineer in charge, etc complete. First floor
Second floor
Third floor
Fourth floor
Judges Chair - Providing and fixing Judges Chair (0.6m x 0.6m x 1.15m) made up of teakwood beam and legs of size 0.06m x 0.06m with the seat and back rest made in 0.018m thk plywood of the approved make finished in 4mm thk veneer of the approved make all natural wooden surfaces polished in melamine polish and provided with antitermite treatment. The legs must have horizontal braces of T.W. members of size 0.025m x 0.025m, the hand rest also made up of Teakwood members of size 0.060m x 0.060m including all labour, leads, lift, as per drawings, as directed by architect and engineer incharge, etc. complete. First floor
Second floor
Third floor
Fourth floor
Teapoy - Providing and fixing Teapoy of size (0.60m X 0.45m) made up of 18 mm Thk Teakwood Frame for Top and at bottom, with 12 mm thk Glass fixed on top,and teakwood legs of 50 mm x50 mm, finishing with melamine polish, lift, as per drawings, as directed by architect and engineer incharge, etc. complete. Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing and Transporting 3 seater Stainless Steel (1.7m x 0.7m x 0.75m) with PU foam covered in leather finish at back of the seat and also on seat with 2 arm rest at the sides of the whole seater, with leg cover to avoid floor damage. 1.7m long and 0.7m wide, 0.45m high seats and 0.75m high backrest (as described in the below image) Basement Floor
Ground floor
First floor
Second floor
Third floor
Fourth floor
Providing and Fixing in position letters made from Stainless Steel with buffing of required size in height and font as directed and including all necessary labour, machinery, finishing, all taxes, lead, lift, cleaning etc, complete. As per Drawings, specification: As Directed by Engineer In Charge. (Satyamev Jayate In Marathi) First floor
Second floor
Third floor
Fourth floor
Providing and fixing Digital Print Floral or Portrait Paintings of good quality of size 0.30m x 0.60m, fixing to the Required Place, including all necessary labour, finishing, all taxes, lead, lift, cleaning etc. complete. spe: As Directed by Engineer In Charge. First floor
Second floor
Third floor
Fourth floor
Providing and fixing Digital Print Floral or Portrait Paintings of good quality of size 0.30m x 1.20m, fixing to the Required Place, including all necessary labour, finishing, all taxes, lead, lift, cleaning etc. complete. spe: As Directed by Engineer In Charge. First floor
Second floor
Third floor
Fourth floor
Providing and fixing Fabric framed with Hard Board Back and Front 5mm Thick glass and good quality of Beading For Paintings of size 0.30m x 0.60m. fixing to the Required Place, including all necessary labour, finishing, all taxes, lead, lift, cleaning etc. complete. spe: As Directed by Engineer In Charge. First floor
Second floor
Third floor
Fourth floor
Providing and fixing Fabric framed with Hard Board Back and Front 5mm Thick glass and good quality of Beading For Paintings of size 0.30m x 1.20m. fixing to the Required Place, including all necessary labour, finishing, all taxes, lead, lift, cleaning etc. complete. spe: As Directed by Engineer In Charge. First floor
Second floor
Third floor
Fourth floor
Providing and fixing Ceramic pots for plants of good quality, fixing to the Required Place, including all necessary labour, finishing, all taxes, lead, lift, cleaning etc. complete. spe: As Directed by Engineer In Charge. First floor
Second floor
Third floor
Fourth floor
Providing and fixing F.R.P. Sculptures of human figure 3 ft height bust of image, arrange as per requirement of aesthetic appeal of the sculpture. Including concept development, art work, scale model of each sculpture, fiber molding, fiber copy, silicon rubber moulding, transport, material, casting material, including erecting framework in M.S. as per design casting labour, etc. complete. spe: As Directed by Engineer In Charge. First floor
Second floor
Third floor
Fourth floor
Medium Height Storage - Providing and fixing Medium Height Storage having size 1.4m (length) x 0.45m (width) and Height 1.80m made up of 18 mm thick Century make commertial ply BWR grade (IS-303) frame work with all side covered with 1.00 mm thick Laminate and inside with 0.80mm thick white laminate, Shelfs shall make in 18 mm thick plywood with laminate inside shall be provided, necessory Fevicol, Anti termiete treatment, Nalis, Abro tape, S.S. Handle 6'', S.S. Hinges 5'' x 1'' x 1'', labours, etc. complete as per drawing and design. As diected by Engineer in charge. Ground floor
First floor
Second floor
Third floor
Library Storage - Providing and fixing Library Storage having size 0.83m (length) x 0.43m (width) and Height 3.90m made up of 18 mm thick Century make commertial ply BWR grade (IS-303) frame work with all side covered with 1.00 mm thick Laminate and inside with 0.80mm thick white laminate, Shelfs shall make in 18 mm thick plywood with laminate inside shall be provided, 5mm thick clear glass provided on door, necessory Fevicol, Anti termiete treatment, Nalis, Abro tape, S.S. Handle 6'', S.S. Hinges 5'' x 1'' x 1'', labours, etc. complete as per drawing and design. As diected by Engineer in charge. Ground floor
First floor
SUPERIOR OFFICE TABLE - Providing and fixing Table having size 2.0m x 0.80m and Height 0.75m made up of 18 mm thick Century make commertial ply BWR grade (IS-303) frame work with all exterior side covered with 1.00 mm thick Laminate and inside with 0.80mm thick white laminate, Drawers shall make in 12 mm thick plywood with 0.8mm thk white laminate on interior shall be provided, necessory Fevicol, Anti termite treatment, Nalis, Abro tape, Drawer Channel 24'', S.S. Handle 4'', S.S. Hinges 3'' x 1'' x 1'', Lock Drawer etc. complete as per drawing and design. As diected by Engineer in charge. Ground floor
First floor
Third floor
FULL HEIGHT PARTITION: Providing and fixing full height partion of 90mm thick, made in Plywood 0.018m thk and clear glass panels 0.006 m thk and Teakwood frames , The Transom section of 0.110m x 0.065m and Mullion section of 0.065m x 0.110m thk to be used for main frame of plywood panels, section of size 0.065m x 0.040m to be used for sub frames. The Glass panels fixed into the frame and supported with mouuldings of size 0.025mx 0.025m finished in melamine polish, the plywood is finished with 0.004m thk Veneer finished in melamine polish, top portion left open for ventilation as per drawing and directed by architect and engineer incharge. Ground floor
First floor
Third floor
Fourth floor
Bank Platform : Providing and fixing half height bank partition in plywood of thickness 0.018m thk with all supports also made in 0.018m thk plywood provided with antitermite treatment and finished in 0.001m thk laminate as per drawing including all material and labour cost including all leads , lifts, as per directed by architect and engineer incharge, etc. complete. Ground floor
CONFERENCE TABLE : Providing and fixing conference table of size 5.00m x 1.20 m x 0.76m made in 0.018m thk BWR commercial Plywood conforming to IS 303 of the approved make supported on vertical members also made in plywood 0.018m thk finished in 0.001m thk laminate on all faces including giving antitermite treatment to the plywood including all necessary material and labour cost, including lead and lift as directed by architect and engineer incharge, etc. complete. First floor
Fourth floor
STAND ALONE TABLE : Providing and fixing table of size 0.80m x 0.60m x 0.76m with the table top, supporting legs and ties and facia all made up in BWR commercial ply 0.018m thk conforming to IS 303 also in 0.018m thk ply of approved make finished in 1mm thk laminate on exterior faces and 0.8mm thk white laminate on the interior surfaces, lipping in BTC 25mm x 12mm with melamine polish including antitermite treatment to all plywood including lead, lift, etc as per directed by architect, engineer in charge, etc. complete. Ground floor
First floor
Second floor
Third floor
Fourth floor
Three Seater Sofa - Providing and supplying Frame in hardwood fully Cushioned in seat and back, with arms, Stainless steel legs at the base, Three seater sofa - 1950mm W x 750mm D x 750mm H, Armrest 150mm- Seat 550mm, and seat height 425mm etc. Complete As diected by Engineer in charge. Ground floor
Providing and fixing F.R.P. Sculptures of human figure 7 ft height bust of image, arrange as per requirement of aesthetic appeal of the sculpture. Including concept development, art work, scale model of each sculpture, fiber molding, fiber copy, silicon rubber moulding, transport, material, casting material, including erecting framework in M.S. as per design casting labour, etc. complete. spe: As Directed by Engineer In Charge. Ground floor
Medium Back Chair - Providing and supplying Medium Back Chair, Chair with Moulded ply, Double Cladding, High Density PU foam in seat and back, Chrome arms and cushion on it, Central tilting mechanisum, Chrome base and gas lift etc. Complete As diected by Engineer in charge. Ground floor
First floor
Third floor
Steel Staff Locker cabinet of size 78'' (H) X 36'' (W) X 19'' (D) having 12 lockers with key locking arrangement in 23+24 SWG combo duly powder coated in color of your choice ( with one year warranty) Third floor
Providing and fixing Discussion Table of size 180cm X 75cm, and 6 chairs.(Table top partical board,melanine foil, plastic edging.under frame for table top in steel with epoxy/polyster powder coating.foot polypropelene plastic chair-leg frame/cross rail steel ,epoxy polyster .seat /back rest polypropelene plastic powder coating) First floor
Second floor
Third floor
Fourth floor
Providing and fixing Reading Table of size 110cm X 75cm, and 4 chairs.( solid pine ,stain,clear acrylic lacquer for table and chair) Ground floor
First floor
Providing and fixing Dinning Table of size 110cm X 67cm, and 4 chairs.(Table top partical board,melanine foil, plastic edging.under frame for table top in steel with epoxy/polyster powder coating.foot polypropelene plastic chair-leg frame/cross rail steel ,epoxy polyster .seat /back rest polypropelene plastic powder coating) Ground floor
Third floor
Providing and fixing frame work of galvanised iron for suspended false ceiling which includes galvanised iron perimeter channels of size 27 mm and 0.5 mm thick having one flange of 20 mm and another of 30 mm along with perimeter of the ceiling, fixing in brick wall / partition with the help of rawal plugs and screws, suspending galvenised iron intermediate channels of size 45 mm and 0.9 mm thick with two flanges of 15 mm each from the soffit at 1200 mm centers with steel galvanised iron hanger of width 25 mm x 0.5 mm fasteners, ceiling section of 0.5 mm thickness having curved wedge of 51.5 mm and two flanges of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with the help of connecting clips and in direction perpendicular to the intermediate channel at 450 mm centers, 12.5 mm dry walls screws at 230 mm centers; fixing screws mechanically either with screw driver or drilling machine with suitable attachment etc. complete. As directed by Engineer in charge. First floor
Providing and fixing false ceiling of 10 to 12 mm thick decorative boards of fibrous plaster of paris including scaffolding if necessary all architectural work like mouldings, cornices, coves, domes, cups as per detailed drawings and three coats of spray painting to boards etc. complete. (excluding frame work, runners and mild steel suspenders). As directed by Engineer. First floor
Providing & fixing Ecophon Panel -A- Akutex (or equivalent) FT 1200 x 2700 board ceiling 40 mm thk with antural square edge , demountable panel with approved fabric wrapped around in concealed gripper system . Panel manufactured from high density glass wool and recyled content of minimum 70% ,covered with glass tissue on one side. The glass wool core of the tiles should be tested and classifed as non combustible according to PREN ISO 1182. Thesystem should have sound absorption NRC value of 0.9 (according to EN ISO 11654) The tiles should withstand a permanent ambient RH upto 95% at 30 degree C without sagging , warping or delaminationg(ISO 4611) : Ecophon board screwed to G.I. frame with screws @ 200 c/c. Frame - G.I. frame fabricated with sal wood spacers at 610 c/c vertically & @ 1220 mm c/c horizontally as per profile of paneling in dwg 50x37.5x0.5 floor & ceiling channel at top and bottom edges, 50x37.5x0.5 'C' channel sections at 1220 c/c vertically, 80 x 26 x 0.5 ceiling section at 400 c/c horizontally, complete as per manufacturers specifications. including 50 mm thk, 32 kg/m3 density glasswool in between g.i frame with welded mesh of G.I 12mm x 12mm square of 24 guage (as per approved sample) and 50 mm air gap as per drawing complete. All as per detail drawings and instructions.
Providing & pasting Acoustic Fabric on POP/ plywood /fiber paneling including necessary primer coat & adhesive etc complete All as approved & directed by Architect
Providing and Fixing Mineral Fibre Acoustical Suspended Ceiling System with Fine Fissured (Bevelled Tegular) Edge Tiles of size 15mm Exposed Grid. The tiles should have Humidity Resistance (RH) of 99%,NRC 0.6, Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 16mm , with Recycled content of 31 %. The tile shall be laid on precoated G.I channel height of 32 with 15 mm wide T - section flanges colour white having rotary stitching and XL2 CLIP on all T sections i.e. the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32mm and a load carrying capacity of 7.57 Kgs/M2 and pull out stength of minimum 100 Kgs.. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system. The Tile and Grid system used together should carry a 10 year warranty. product approved in GRIHA and BS 476 etc. complete. As directed by Engineer in charge. First floor
Providing & fixing Glasswool of 32 Kg/m3 density,50mm thk. Wrapped in non woven 70gsm fabric . Owens Corning ,or twiga insul ,or equivalent etc complete As directed by Architect
Providing & fixing of Synthetic washable carpet of 1000 gsm loop pile woolen / nylon carpet with 6mm thk underly to be fixed property on existing finished floor using correct adhesive for fixing of carpet as per manufacture specifications all as per design, shade & approved make Architect & Consultant
Providing & pasting Vinyl wall paper on POP / plywood surface including necessary priming coat & adhesive etc complete All as approved & directed by Architect
Providing & fixing teak wood flooring using planks 35 mm thick for stage flooring planed on both sides tongued & grooved over 18mm thk ply with with all necessary hardware & adhesive required hard wood scantling of size 50 x 50 mm framework to support, etc complete as per drawing & as directed by architect
Providing & applying Wax polishing for stage including all required surface preparation in approved shade etc complete As directed by Architect
Providing & fixing wall partition 100mm thk made of 12mm thick plywood on both sides fixed on wooden grid work of section 75mmx50mm spaced at 610mm center to center both ways & covered with 4mm thick veneer including melamine polish on one side & 4mm thick MDF (including plastic emulsion paint on MDF) etc complete as approved & directed by Architect
Providing & Fixing in position Acoustical Doors along with 150 x 150 mm teak wood frame, doors made from 50mm Teak wood frame 600 x600 c to c filled with 1000 Gsm synthetic wool 50mm thick and 3mm Tecsound from both sides, 12mm waterproof ply & veneer from both sides , including 150mm heavy duty SS hinges (Geze / Dorma or eq.) 4 no each leaf, with Door-closer (Dorma / Geze or eq.) including cost of required Cut-Outs, decorative mouldings / finishing-items / melamine polish & Scaffolding as per Architectural & Acoustical Design & Instructions & Complete in all aspects .including all materials labour,finishing etc complete. First floor
Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. First floor
MISC Furniture like Stage levels made out of 12 mm thk BWP grade plywood, on hallock wood frame work of size 50mmX35mm thk, finished with 2 coats of oil emulsion paint over a coat of primer and putti as required, complete as shown on drawing and as directed by architect (1800X1200X150) - 2 (1800X1200X230) - 2 (1800X1200X300) - 2
LECTURN providing & Fixing podium table in 19mm thk BWP grade ply with 4mm vineer facing as shown in dwg. Table shall have 300 X 300 X 10 mm square toughened glass fixed on studs, in front side of tale with logo as per client. Table shall include one reading lamp with 12 mm thk soft board finished with fabric as approved and reading light point as indicated in the drawing all surfaces shall be finished with 4mm thk venner and 3 coats of melamine polish size:-750 X 600 X 1200mm (2nos)
Providing making & supplying mixer / light table 1500mm X 750mm X 750mm size in 19 mm thk BWP grade ply with 1.5 mm thk laminate finish and with 75x37.5mm footrest in salwood as per drawing. Table shall be made in 19 mm thk BWP grade ply with sides & top along with front and draw finished in laminate, finished Table top shall have necessry cut out for audio mixer approved and instruction on site including s.s handles locks and necessary hardware like sliding channels etc. internal surface shall be finished with two coats of french polish size
Providing and fixing in position Godrej MakeTM2 - TWIN MOBILE Drive 3 Bay Push Pull Type Unit of Optimizer ( Storage solution of size 457DX915WX1980H milimeter made out of 0.8 mm thick CRCA (Colled Rolled Colad Annealed) Steel Conferming to indinan Standard:513 grade, Having 5 Loading level Formed by 4 no Adjustable Shelves, finished with fire retardent epoxy polyster powder coating of approved colour and shade with dry film Thickness of mm 40 microns overbaked with a controleed temprature of 180 deg. C to 200 degree C the undercarriage made up welded frame of HR sheet 3.15mm Thick Conferming to Indian standard: 10748 suitably fabruicated to taken the load base on confriguation having fastners labour etc complete. First floor
Providing and fixing Guide Rails made out of 28mm dia bar placed on 1.2mm thick MS plate above the floor level having standard of safety etc. Complete. First floor
Estimate no : 132042-1 of 2022-2023 Providing Electrical Installation for Proposed Extended court building & Parking building at District & Session Court Premises Shivajinagar Pune. Supplying and erecting HMS P.V.C. conduit 25 mm. dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.
Supplying and laying HMS PVC conduit 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.
Supplying and laying HMS PVC conduit 32 mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.
Supplying and erecting UPVC reinforced flexible conduit 25 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete.
Supplying and erecting mains with 2x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
Supplying and erecting green colour earthing with 1x 1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
Supplying and erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
Supplying and erecting green colour earthing with 1x 2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
Supplying and erecting green colour earthing with 1x 4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
Supplying and erecting mains with 2x4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
Supplying and erecting mains with 4x 4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
Supplying and erecting green colour earthing with 1x 6 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
Supplying and erecting mains with 4x 6 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
Supplying and erecting mains with 4x 10 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
Supplying and erecting Ceiling rose / Batten holder / Slanting holder / hanging cord switch / hanging bell push / pendent holder bakelite base 6A. erected on filled polypropylene board or polished double wooden block/ PVC junction box.
Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.
Supplying and erecting ISI mark modular type bell-push with indicator 2 modules 6A / 10A, duly erected on provided plate and box with wiring connections complete.
Supplying and erecting ISI mark modular type switch 16 / 20 A with indicator, duly erected on provided plate and box with wiring connections complete.
Supplying and erecting ISI mark modular type D.P. switch 32A with indicator duly erected on provided plate and box with wiring connections complete. (For AC)
Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.
Supplying and erecting ISI mark modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.
Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. Note: Add Rs 57/- for additional two module box with double mounting plate if required.
Supplying and erecting ISI mark modular type blanking plate one module, duly erected on provided plate & box.
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background..
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
Point wiring wiring for light/fan/bell concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW
Wiring for plug on board with Switch socket concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW
Point wiring wiring for light/fan/bell hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FR grade copper wires modular type switch earthing and required accessories as per specification No: WG-PW/HW
Supplying and erecting square shaped CRCA /die-cast aluminium powder coated housing LED panel light (slim edge-lit) suitable for 9 W - 12 W with provision for plane front frame with translucent cover fixed to the housing complete.
Supplying and erecting square / round shaped CRCA /die-cast aluminium powder coated housing LED panel ( slim edge-lit) light suitable for 13W to18W with provision for plane front frame with translucent cover fixed to the housing complete.
Supplying and erecting CRCA /die-cast aluminium powder coated housing LED panel light (slim edge-lit) square / round shape suitable for 19 to 24 W with provision for plane front frame with translucent cover fixed to the housing complete.
Supplying and erecting square shaped CRCA /die-cast aluminium powder coated housing LED panel light (slim edge-lit) 600x600mm suitable for 36 W-40W with provision for plane front frame with translucent cover fixed to the housing complete.
Supplying and erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete.
Supplying and erecting ding dong / electronic musical type call bell with heavy duty coil suitable to operate on 230V A.C. supply erected on polished double wooden block/sunmica block of suitable size
Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected in an approved manner.
Supplying and erecting five star rated energy saving Ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF
Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length 22 side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia.or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab.
Supplying and erecting B grade G.I. pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.
Supplying, erecting, testing and commissioning of self-contained water cooler 230/250 V 50 cycles nominal cooling capacity of 80 litres/hr and storage capacity 120 litres with partially stainless steel body complete. specification no. AP-WCR/WC
Supplying and erecting ultra violet storage type water purifier ( RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps, storage capacity of purified water 7 to 8 litre with activated carbon filter and softener operating on 230 V single phase A.C. supply.
Carrying out core cutting of size 3" to 5" dia x 15" length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original.
Supplying, installing, testing and commissioning of 101 kWp capacity on grid solar power pack with GI mounting structure and inter connecting wires / cables without battery bank SPV modules and solar power conditioning unit of required capacity complete, with 5 years on site performance warrantee. Specification no. ESD-RT-ONG
Supplying, erecting and marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB
Supplying, erecting and marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB
Supplying, erecting and marking TPMCB 6 A to 32A in provided distribution board as per specification no. SW-SWR/MCB
Supplying, erecting and marking TPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB
Supplying, erecting and marking FPMCB 6A to 32A in provided distribution board as per specification no. SW-SWR/MCB
Supplying, erecting and marking FPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB
Supplying and erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 12 poles, on iron /GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB
Supplying and erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 24 poles, on iron/ GI frame/wooden board.(horizontal busbar type) as per specification no. SW-SWR/MCBDB
Supplying and erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SP / TP MCBs of 24 poles/ 8 ways on iron/ GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB
Supplying and erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted suitable for 3 pole MCCB as incomer & outgoing SP MCB (24 poles) or TP MCB of 8 ways (24 poles) , on iron/ GI frame. (vertical busbar type) as per specification no. SW-SWR/MCBDB1
Supplying and erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted suitable for 3 pole MCCB as incomer & outgoing SP MCB (36 poles) or TP MCB of 12 ways (36 poles) on iron/ GI frame. (vertical busbar type) as per specification no. SW-SWR/MCBDB1
Providing and erecting 3 Pole MCCB upto 100A, 415V, with short circuit rating 25 kA (Ics=100% of Icu ),adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB
Providing, erecting and commissioning 4 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 16/25A complete as per specification no. SW-RCCB/RCCB
Supplying and fixing CRCA sheet Box with earthing terminals for housing 4 Pole RCCB on iron frame/laminated board complete.
Supplying and erecting terminal spreaders for use on MCCB incoming and outgoing terminals for 3 pole upto 100A MCCB complete. (14 of 6).
Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. (40X40X5mm=3 X 20 Mtr=60Kg)
Supplying, erecting & terminating XLPE armoured cable 3½ core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
Supplying, erecting & terminating XLPE armoured cable 3½ core 35 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
Supplying, erecting & terminating XLPE armoured cable 3½ core 70 sq. mm. aluminium conductor with continuous 8.35 sq. mm. (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
Supplying, erecting & terminating XLPE armoured cable 3½ core 95 sq. mm. aluminium conductor with continuous 8.35 sq. mm. (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
Supplying, erecting & terminating XLPE armoured cable 1100 V. 3½ core 185 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
Supplying and laying (including excavation) 25 cm dia RCC Hume pipe of standard thickness at required depth up to 90 cms. below road / ground surface, for covering provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet).
Supplying and laying including excavation of suitable width & depth up to 90 cm) 90 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.
Providing and erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.
Providing and erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 200 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.
Providing and erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.
Providing and erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 500 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.
Providing and erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 150 mm width & 20 mm height complete with necessary hardware in approved manner.
Providing and erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 200 mm width & 20 mm height complete with necessary hardware in approved manner.
Providing and erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 300 mm width & 20 mm height complete with necessary hardware in approved manner.
Providing and erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 500 mm width & 20 mm height complete with necessary hardware in approved manner.
Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP
Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP.
ELECTRICAL CONTROL PANEL FOR MAIN PANEL ROOM Fabricating & Supply installing testing and commissioning of Main Electrical control panel( Size : 3.60 Mtr X 2.38 Mtr X 0.8 Mtr ). INCOMING 1 nos. 800A 3P ACB electrical draw out type (50 KA) 1 Sets of 800 Amps. Aluminium Bus bars with colour coded heat shrinkable PVC sleeves 1 Set of RYB indicating lamps with individual MCB 1 No. flush mounted panel meter suitable rated current transformers 1 No. 0-500V . OUTGOING FEEDER FOR MAIN PANEL - 250 A FP MCCB ( 3 Nos. ), 200 A FP MCCB ( 3 Nos.) & 100 A FP MCCB (13 nos.) All the components shall be housed in a common cubical made of 16 swg. M.S.sheet .The panel shall be powder coated of approved colour both inside & out side. The panel shall have both bottom & top cable entry provisions and panel shall be mounted on Pedestal of 300 mm height panel should be IP65 & type tested as per IEC 61439 ,IS 2147:1962 Degree of protection & IS 4722 HV testing for Panel with necessary accessories etc completed. (Rate Analysis attached)
Estimate no : 132042/2 of 2022-2023 Providing Passenger lifts(6 nos) for Proposed extended court building & Parking Building at District & Session court primises Shivajinagar Pune SITC of Electric Traction Passenger Lift with · Rated capacity :- 4 Passenger/272Kg · Floors :- G+4 floor (5Stops/5 Landings) · Travel :- 18 to 21 mtrs · Location of Lift Machine:- MR/MRL · Rated speed :- 1.0mps VS · Doors type :- COPO/TOPO Doors with frame having clear opening of 700/800 mm wide x 2000 mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves/frames · Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. · COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor · Clear Car size of 1100 mm wide x 700 mm deep x 2000 mm high · LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings · Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port, control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class · ARD complete with necessary SMF VRLA batteries · Fireman controller having fireman switch at fire Landing. · CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for 60 days with 18” FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge. · Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength · Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work · Minor civil work for alteration if any and erection of door frames and accessories, erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT. · Lift shaft available having clear size of 1500 mm wide x 1500mm deep, 1500 mm Pit depth,4250 mm Overhead. General: - Job includes entire procedure of obtaining all necessary erection permissions & "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. 2) Warrantee: - Job covers three years onsite warrantee for all the Lift parts with FCAMC as per the maintenance schedule. Add on note 1) For Lift car having 700mm wide x 2000mm high clear entrance having 1.5mm thick SS 304 grade sheet car door [Two panel] complete with required accessories like door operator mechanism with drive, required Aluminium sill, infrared curtain & necessary wiring with interlocking arrangement etc. complete. (155611x3) 2)For Lift travelling above First floor & up to Sixth floor (1x31974) 3)For vision panel having Size 100mm wide x 200mm high covered with fire rated laminated glass, having punched Jali as a part of the door panel SS sheet itself.(12x3261)
SITC of Electric Traction Passenger Lift with · Rated capacity :- 8 Passenger/544Kg · Floors :- B+G+4 floor (6 Stops/6 Landings) · Travel :- 21 to 25 mtrs · Location of Lift Machine:- MR/MRL · Rated speed :- 1.0mps VS · Doors type :- COPO/TOPO Doors with frame having clear opening of 800 mm wide x 2000 mm high made from SS 304 grade sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames · Lift car enclosure made from SS 304 grade sheet of 1.5mm thick with hairline finish with frame made from MS girders bracing of adequate size with minimum safety factor of 5 with Toe Guard Apron with necessary false ceiling with adequate LED lights blower/fan for ventilation & SS chequered plate flooring handrails mirror emergency light etc. · COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI scrolling UP/DN LED indicator & with/without attendant key switch OWD with audio-visual alarm VAS in Marathi Hindi & English with intercom system with telephone instrument in Lift car LMR & FCC/ground floor · Clear Car size of 1300.mm wide x 1100.mm deep x 2000.mm high · LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI Lift car arrival & next travel direction audio-visual indication at all landings · Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system with IBMS compatible having necessary port control panel duly wired with proper size & strength copper wire for power & control circuit with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class · ARD complete with necessary SMF VRLA batteries · Fireman controller having fireman switch at fire Landing · CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for 60 days with 18" FHD TV monitor to be kept in FCC/LMR as directed by Engineer In Charge. · Lift Machine of Gearless PMSM of suitable kW with Traction pulley OSG electromagnetic brakes entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves suspension wire ropes/belts of adequate size & strength · Other mechanical parts such as T section adequate size guide rails for car & counter weight with brackets fasteners counter weight frame with necessary blocks buffers with necessary support arrangement MS pit ladder etc. erected with necessary steel work · Minor civil work for alteration if any and erection of door frames and accessories erection buffers erection of lift machinery adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT. · Lift shaft available having clear size of 2000 mm wide x 1800mm deep. 1500mm Pit depth 4250 mm Overhead.1) General: - Job includes entire procedure of obtaining all necessary erection permissions & "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. 2) Warrantee: - Job covers three years onsite warrantee for all the Lift parts with FCAMC as per the maintenance schedule. Add on note 1) For Lift car having 800mm wide x 2000mm high clear entrance having 1.5mm thick SS 304 grade sheet car door [Two panel] complete with required accessories like door operator mechanism with drive, required Aluminium sill, infrared curtain & necessary wiring with interlocking arrangement etc. complete. (160270x4) 2)For Lift travelling above First floor & up to Sixth floor (1x31974) 3)For vision panel having Size 100mm wide x 200mm high covered with fire rated laminated glass, having punched Jali as a part of the door panel SS sheet itself.(14x3261)
SITC of Electric Traction Passenger Lift with · Rated capacity :- 13 Passenger/884Kg · Floors :- G+4 floor (5Stops/5 Landings) · Travel :- 17.5 to 21 mtrs. · Location of Lift Machine:- MR/MRL · Rated speed :- 1.0mps VS · Doors type :- COPO/TOPO Doors with frame having clear opening of 900/1000 mm wide x 2000 mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves/ frames · Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. · COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor · Clear Car size of 1100 mm wide x 2000 mm deep x 2000 mm high · LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings · Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port, control panel duly wired with proper size & strength copper wire for power & control circuit, with provision for addition of floor /control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class · ARD complete with necessary SMF VRLA batteries · Fireman controller having fireman switch at fire Landing, · CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for 60 days with 18" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge. · Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength · Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work · Minor civil work for alteration if any and erection of door frames and accessories, erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT. · Lift shaft available having clear size of 1900 mm wide x 2500mm deep, 1500 mm Pit depth,4250 mm Overhead. General: - Job includes entire procedure of obtaining all necessary erection permissions & "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. 2) Warrantee: - Job covers three years onsite warrantee for all the Lift parts with FCAMC as per the maintenance schedule. Add on note 1) For Lift car having 900mm wide x 2000mm high clear entrance having 1.5mm thick SS 304 grade sheet car door [Two panel] complete with required accessories like door operator mechanism with drive, required Aluminium sill, infrared curtain & necessary wiring with interlocking arrangement etc. complete. (165891x3) 2)For Lift travelling above First floor & up to Sixth floor (1x31974) 3)For vision panel having Size 100mm wide x 200mm high covered with fire rated laminated glass, having punched Jali as a part of the door panel SS sheet itself.(12x3261)
SITC of Electric Traction Passenger Lift with · Rated capacity :- 8 Passenger/544Kg · Floors :- G+3 floor (4 Stops/4 Landings) · Travel :- 16 to 20 mtrs · Location of Lift Machine:- MR/MRL · Rated speed :- 1.0mps VS · Doors type :- COPO/TOPO Doors with frame having clear opening of 800 mm wide x 2000 mm high made from SS 304 grade sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames · Lift car enclosure made from SS 304 grade sheet of 1.5mm thick with hairline finish with frame made from MS girders bracing of adequate size with minimum safety factor of 5 with Toe Guard Apron with necessary false ceiling with adequate LED lights blower/fan for ventilation & SS chequered plate flooring handrails mirror emergency light etc. · COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI scrolling UP/DN LED indicator & with/without attendant key switch OWD with audio-visual alarm VAS in Marathi Hindi & English with intercom system with telephone instrument in Lift car LMR & FCC/ground floor · Clear Car size of 1300.mm wide x 1100.mm deep x 2000.mm high · LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI Lift car arrival & next travel direction audio-visual indication at all landings · Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system with IBMS compatible having necessary port control panel duly wired with proper size & strength copper wire for power & control circuit with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class · ARD complete with necessary SMF VRLA batteries · Fireman controller having fireman switch at fire Landing · CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for 60 days with 18" FHD TV monitor to be kept in FCC/LMR as directed by Engineer In Charge. · Lift Machine of Gearless PMSM of suitable kW with Traction pulley OSG electromagnetic brakes entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves suspension wire ropes/belts of adequate size & strength · Other mechanical parts such as T section adequate size guide rails for car & counter weight with brackets fasteners counter weight frame with necessary blocks buffers with necessary support arrangement MS pit ladder etc. erected with necessary steel work · Minor civil work for alteration if any and erection of door frames and accessories erection buffers erection of lift machinery adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT. · Lift shaft available having clear size of 1500 mm wide x 2500 mm deep. 1500mm Pit depth 4250 mm Overhead.1) General: - Job includes entire procedure of obtaining all necessary erection permissions & "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. 2) Warrantee: - Job covers three years onsite warrantee for all the Lift parts with FCAMC as per the maintenance schedule. Add on note 1) For Lift car having 800mm wide x 2000mm high clear entrance having 1.5mm thick SS 304 grade sheet car door [Two panel] complete with required accessories like door operator mechanism with drive, required Aluminium sill, infrared curtain & necessary wiring with interlocking arrangement etc. complete. (160270x2) 2)For Lift travelling above First floor & up to Sixth floor (1x31974) 3)For vision panel having Size 100mm wide x 200mm high covered with fire rated laminated glass, having punched Jali as a part of the door panel SS sheet itself.(10x3261)
Supplying and erecting Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.
Supplying and erecting Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.
Supplying and erecting Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 modules duly erected.
Supplying and erecting Supplying and erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete.
Supplying and erecting Supplying and erecting bulkhead fitting suitable for upto LED upto 12W fixed on wall. As per specification no. FG-IDF/BHF
Supplying and erecting Supplying and erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base.
Supplying, erecting and marking Supplying, erecting and marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB
Supplying, erecting and marking Supplying, erecting and marking DPMCB 6 A to 32 A B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB
Supplying, erecting and marking Supplying, erecting and marking FPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB
Supplying and erecting Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 poles for incoming and 2 poles for outgoing SP MCB’s on iron/ GI frame as per specification no. SW-SWR/MCBDB
Supplying and erecting Supplying and erecting CRCA sheet metal one way enclosures suitable for DP MCB /TP MCB /FP MCB erected on angle iron/GI frame complete.
Supplying and fixing Supplying and fixing CRCA sheet Box with earthing terminals for housing 2 Pole RCCB on iron frame/laminated board complete.
Supplying and fixing Supplying and fixing CRCA sheet Box with earthing terminals for housing 4 Pole RCCB on iron frame/laminated board complete.
Supplying, fixing, and commissioning Supplying, fixing, and commissioning 2 pole,RCBO (residual current breaker with overcurrent short circuit 10 kA and earth leakage protection), with 30/100/300 mA sensitivity and having capacity of 6/10/16/20/25A, as per specification no SW-RCCB/RCBO
Supplying, fixing, and commissioning Supplying, fixing, and commissioning 4 pole RCBO ( (residual current breaker with overcurrent short circuit 10 kA and earth leakage protection), with 30/100/300 mA sensitivity and having capacity of 63A as per specification no SW-RCCB/RCBO
Supplying, erecting & terminating Supplying, erecting & terminating XLPE armoured cable 2 core 4 sq mm copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
Supplying, erecting & terminating Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
Providing Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill Ground Enhancing compound complete with all materials, testing & recording the results as per specification no ESE -LA
Supplying and erecting Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no. EA-EP.(25x5 mm copper strip @ 0.67 kg/mtr x 125 mtr=83.75 say 84 kg)
Estimate no : 132042-3 of 2022-2023 Providing Fire Fighting , Sprinkler & Fire detection systems for Extended Court Building & Parking building at District & Session Court Premises Shivaji Nagar Pune Supplying and erecting HMS PVC conduit 20 mm dia. with PVC accessories on wall / ceiling as per specification No: WG-MA/CON.
Carrying out core cutting of size 3" to 5" dia x 15" length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original.
Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.(75mm X 75mm X 5mm = 5.75 Kg , Channel required for external hydrant box framing total hydran valve -96 nos., Qty required for one hydrant valve 2.65 mtr hence 5.75 X 3.46 X 96 nos. = 1912.25 Kg , Pump room header support - 5 pumps X 5 mtr each pump = 25 mtr X 5.75= 143.75 Kg hence total = 2056 Kg)
Supplying, erecting & terminating XLPE armoured cable 4 core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
Supplying, erecting & terminating XLPE armoured cable 4 core 95 sq. mm. aluminium conductor with continuous 8.35 sq. mm. (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
Supplying, erecting & terminating XLPE armoured cable 4 core 6 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
Providing and erecting Hot dipped galvanized ladder type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150 mm width & 100 mm height comprising all required standard accessories.
Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP (earthing for Main Pump 2nos. ( 2 X 2nos ) , Jocky pump 2nos. ( 2 X 2nos.) , , Diesel engine driven fire pump - (2no.) , Main control panel ( 2nos.) hence total 12 nos.)
Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP.(25X5mm=0.59Kg X 90 Mtr = 53.10 Kg)
Providing Round bottom fire bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook complete.
Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint complete.
Supplying and erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts grouted in wall complete.
Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall.
Supplying and erecting D.O.L. Starter 400V. 3 phase, 50 cycles with no volt coil and overload element with necessary materials and connected to supply upto 7.5 H.P.
Supplying, installing, testing and commissioning of with perfect aligning, proper levelling of fire service main multi stage pump, of 2800 LPM at 76 m head centrifugal type, 75 HP (55 kW), 3 phase, 415 volt, 50Hz or of suitable HP with suitable stages as per specification no. FF-MFP/MSC
Supplying, installing, testing and commissioning of with perfect aligning, proper levelling of jockey pump of 240 LPM at 105 m head 20 HP (15 kW), 3 phase, 415 volt, 50Hz or of suitable HP with suitable stages as per specification no. FF-MFP/JP
Supplying, installing, testing and commissioning of with perfect aligning, proper levelling of booster pump of 450 LPM at 35 m head 7.5 HP (5.5 KW), 3 phase, 415 volt, 50Hz or of suitable HP with suitable stages as per specification no. FF-MFP/BP
Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 25 mm dia with necessary fittings complete as per specification no. FF-PP
Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 50 mm dia with necessary fittings complete as per specification no. FF-PP
Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 65 mm dia with necessary fittings complete as per specification no. FF-PP
Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 75/80 mm dia with necessary fittings complete as per specification no. FF-PP
Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 100 mm dia with necessary fittings complete as per specification no. FF-PP
Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 150 mm dia with necessary fittings complete as per specification no. FF-PP
Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 200 mm dia with necessary fittings complete as per specification no. FF-PP
Providing coating of bitumen paint & 4mm thick wrapping for underground 100 mm ring main of fire fighting system.
Providing coating of bitumen paint & 4mm thick wrapping for underground 150 mm ring main of fire fighting system.
Supplying and erecting cast iron foot valve ball type/flap type of size 100 mm dia with strainer for negative suction complete as per specification no. FF-VL/FV
Supplying and erecting cast iron foot valve ball type/flap type of size 200 mm dia with strainer for negative suction complete as per specification no. FF-VL/FV
Supplying and erecting cast iron double flange butterfly valve of size 75/80 mm dia. complete as per specification no. FF-VL/BFV
Supplying and erecting cast iron double flange butterfly valve of size 100 mm dia. complete as per specification no. FF-VL/BFV
Supplying and erecting cast iron double flange butterfly valve of size 150 mm dia. complete as per specification no. FF-VL/BFV
Supplying and erecting cast iron double flange butterfly valve of size 200 mm dia. complete as per specification no. FF-VL/BFV
Supplying and erecting cast iron double flange NRV of size 75/80 mm dia complete as per specification no. FF-VL/NRV ( For Jocky Pump)
Supplying and erecting cast iron double flange NRV of size 150 mm dia complete as per specification no. FF-VL/NRV ( 3 for main pump + 2 for Fourway inlet )
Supplying and erecting cast iron double flange NRV of size 200 mm dia complete as per specification no. FF-VL/NRV ( For Header)
Supplying and erecting gun metal gate valve of size 25 mm dia complete as per specification no. FF-VL/GV
Supplying and erecting stainless steel single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV
Supplying and installing one piece moulded HDPE / fibre water tank for negative suction only, having capacity 1000 litres fitted with necessary accessories complete as per specification no. FF-FFA/PT
Supplying and installing wall mounting swinging Hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) fitted with necessary accessories complete as per specification no. FF-FFA/HV
Supplying fire fighting reinforced rubber lined (R.R.L.) hose pipe, 63mm dia, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL
Supplying and erecting stainless steel branch pipe 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specifications no. FF-FFA/NZ
Supplying and erecting fire brigade header (Siamese connection) of 150 mm dia for supplying water to wet riser system complete as per specification no. FF-FFA/SMC
Supplying and installing air vessel of 300 mm dia 1.5m in height M.S. tank installed inside pump house / on terrace complete as per specification no. FF-FFA/ACT
Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV
Supplying and installing pressure gauge of 100 mm dia., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, and G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG
Supplying and installing pressure switch with 12/15 mm dia isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS
Supplying and erecting one no. brass orifice plate having 6 mm. thickness, 140 mm outer dia and required/proper diameter of inner hole at every single outlet hydrant valve as per specification no. FF-FFA/OP
Supplying and erecting M.S./CRCA cabinet for housing Floor Hydrant valve, hose pipe, hose reel and branch pipe (size 1000 x 736 x 736 mm.) made from 16 SWG sheet and angle iron 25 x 25 x 4 mm. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour.
Supplying, installing, testing and commissioning of remote response indicators complete as per specification no. FF-FAAS/RRI
Supplying, installing, testing and commissioning of FRLSH, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU
Supplying, installing, testing and commissioning of amplifier 120 W for public address system suitable to operate on 230 Volts A.C. / 12 Volts D.C. supply complete as per specification no. FF-PA/AFR
Supplying, installing, testing and commissioning of sound column 15 Watts complete as per specification no. FF-PA/SOC
Supplying, installing, testing and commissioning of microphone complete as per specification no. FF-PA/MIC
Supplying, installing, testing and commissioning of stand for microphone complete.
Supplying, installing, testing and commissioning of 1.5 sq mm speaker wire complete.
Supplying, installing, testing and commissioning of 15 mm (½") dia. NBCM Body chrome finished quartzoid bulb sprinkler having 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FF-SPR
Supplying, installing, testing and commissioning of vane type water flow detector suitable for detecting flow of water in wet sprinkler pipe of main line or branch lines of 75/80 mm dia having following features 1) Visual switch activation 2) Rugged switch assembly 3) Heavy duty aluminium pipe saddles 4) Durable metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT ( Single pole double track ) synchronised switches 7) serviceable without draining pipes
Supply,installation, testing & commissioning of Diesel Engine driven fire pump suitable for automatic/ manual operation consisting of the following as under: End Suction Fire Pump having a capacity of 2800 lpm at 76 meter head The pump shall radially split top center line discharge, self venting casing.The pump construction shall be cast iron, bronze fitted and shall be shall be fitted with packing. The shaft shall be fitted with stainless steel sleevesand be supported by two back to back thrust ball bearings and one radial roller bearing. the back pull out design allow the complete rotating assembly to be removed without disturbing the casing piping connection The pump shall be supplied with combination suction and discharge gauge 3 1/2" dial type with 1/4" cock and lever handle. fuel tank min 150 lit.1500 rpm water cooled with radioter exhaust pipe 1mtr extended duly insulated 50mm thick glass wool etc.completed erected on base frame on foundation with anti vibration mounting pad. ( Non CSR rate Approved by SE PWD electrical Pune for Est. no.121131/19-20 As per non CSR ltr No.1030/2019 dated 13/03/2020)
Supplying and erecting fire resistant mortar (20 kg) with fire resistance class S90 as per National Electrical Code (NEC) SP30-2011 suitable to seal the openings with all kinds of cables, pipes and cable support system in steel and aluminium and plastic profiles ( Except hollow core conductors). The residual openings shall be closed with filler, as per specification no. FF-FRM
Excavating hard Rock or bituminous road by chiselling for preparing pit for pole / stay/earth plate / for laying cable/ pipe & clearing the site by removing debris & making the site as required complete. ( 288 Mtr (L) X 1 Mtr ( D) X 1 Mtr (W)= 288 Cumtr)
Supply, installation, testing & commissioning of 4 Loop Microprocessor based analogue addressable type fire alarm control panel compact type suitable for 4 loops , detectors along with required numbers of loop cards with 80 character LCD display, four access levels,600 event historic logging, suitable for 240 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and capable of operating the system for 2 hours during an emergency condition. In peer to peer networking, with all required accessories etc., complete
Excavating hard murum / metal road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site as required complete. ( 380 Mtr (L) X 1 Mtr ( D) X 1 Mtr (W)= 380 Cumtr)
Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (for pumps). ( 1Mtr X 2 Mtr X 0.5 Mtr = 3 Cumtr X 2 nos)
Supplying & installing auto glow ( Viewing upto 15 Mtr length) fire Signages viz Fire Hydrant , Fire Extinguishers , Fire Exit , Fire Door , Fire Hose Box etc. Size of 450 x 150mm
Supplying & installing auto glow ( Viewing upto 15 Mtr length) fire Signages viz Fire Hydrant , Fire Extinguishers , Fire Exit , Fire Door , Fire Hose Box etc. Size of 300 x 100mm
Supplying and erecting ISI mark GI pipe 32 mm. dia ‘C” class at position with accessories complete. Specification no. CW-PLB/GP.
Supplying, Installation, Testing & Commissioning of Addressable Hooters cum strobe complete with all necessary fixing arrangement with wall mounting arrangements as per detailed Technical Specifications ( Non CSR rate approved by SE PWD electrical Pune in Est no. 1120201/21-22 )
Supplying and erecting ISI mark GI pipe 40 mm. dia ‘C” class at position with accessories complete. Specification no. CW-PLB/GP.
Supplying & installing auto glow ( Viewing upto 15 Mtr length) fire Signages viz Fire Hydrant , Fire Extinguishers , Fire Exit , Fire Door , Fire Hose Box etc. Size of 600 x 200mm
Supplying, Installation, Testing & Commissioning of Intelligent Addressable type Heat Detector with mounting base, Dual LEDs for 360° visibility complete as per detailed Technical Specifications
SSupplying, Installation, Testing & Commissioning of Addressable manual call point complete with all necessary fixing arrangement assembly duly fixed completely up to supply source & MCP as required as per detailed Technical Specifications ( Non CSR rate approved by SE PWD electrical Pune in Est no. 1120201/21-22 )
Supplying, Installation, Testing & Commissioning of Intelligent Addressable Optical detector , Drift compensation sensitivity adjustment 8 bit processor with remote indicator output ( Non CSR rate approved by SE PWD electrical Pune in Est no. 1120201/21-22 )
Supplying and erecting fire brigade header of 150 mm dia, for supplying water in fire tank complete as per specification no. FF-FA/FBC
Supply, Installating, Testing & Commissioning of UL listed armoured type flexible sprinkler hose. Length 1000mm upto 1500mm as per site condition. ( Non CSR rate Approved by SE PWD electrical Pune for Est. no. 2698/19-20)
Estimate no : 132042/4 of 2022-2023 Providing LAN , Telephone system & CCTV system for Proposed extended court building & Parking building at District & Session Court campus , Shivajinagar Pune. Supplying and erecting HMS P.V.C. conduit 25 mm. dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.
Supplying and laying HMS PVC conduit 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.
Supplying and erecting HMS PVC conduit 32 mm dia. with PVC accessories on wall / ceiling as per specification No: WG-MA/CON.
Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25 mm with accessories on wall/ceiling as per specification No: WG-MA/CON.
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
Supplying and erecting telephone copper cable 2 pair with 0.5 mm dia. laid in provided PVC casing capping/ conduit as per specification No. WG-TW
Supplying and erecting telephone copper cable 50 pair with 0.5 mm dia. laid in provided PVC casing capping / conduit as per specification No. WG-TW
Supplying, installing, testing and commissioning of MDF Box 200 x 200 pairs as per specification No. WG-TW
Supplying, installing, testing and commissioning of junction box suitable for 50 pairs as per specification No. WG-TW
Supplying, installing, testing and commissioning of 10 pair module for connection & disconnection of telephone cable as per specification No. WG-TW
Supplying, installing, testing and commissioning of digital (hybrid) type EPABX of 6 x 24 extensions suitable upto 96 extensions complete. (Rs. 56357/-) 1) Add Rs. 31576/- for additional 16 extension card X 7 nos. = 221032/- 2)Add Rs. 18510/= for additional 8 trunks lines card. X 1 nos = 18510/- Hence total Rs. 56357 + 221032 + 18510 = Total Rs. 295899/-
Supplying, installing, testing and commissioning of push button telephone instrument desk top/wall mount with caller ID unit as per specification complete.
Supplying, installing, testing and commissioning of approved type Digital key telephone / IP telephone instrument as per specification complete.
Supplying and installing expansion cabinet for extension of digital hybrid EPABX to expand system by 32 ports with programming and configuration of extensions and direct lines with required accessories complete.
Supplying and installing UTP networking cat-6 cable suitable for LAN / WAN Computer net-working as per specification No. WG-COC/NC
Supplying and installing UTP networking cat-6 cable with rodent proof jacket suitable for LAN / WAN Computer net-working as per specification No. WG-COC/NC
Supplying and fixing 1 meter length, UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC
Supplying and fixing 3 meter length, UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC
Supplying and erecting FR grade, pvc armoured multimode optical fibre cable with 6 fibres, with core dia 50/125 µm (OM3) suitable for 1 gbps ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench as per specification No. WG-COC/OFC LSZH
Supplying and pluging FRLS duplex 3 meter length, Fibre Patch cord LC-SC MM (50) OM3 LSZH duplex complete as per specification No. WG-COC/FPC
Supplying, fixing, and configuring web smart power over ethernet switch of 24 ports on provided rack or as directed as per specification No. WG-NWC/ENS
Supplying, fixing, and configuring GB managed ethernet layer 2 switch of 20 Ports + 4 SFP combo and web View/CLI as per specification complete.
Supplying, fixing, and configuring layer 3/ 20 10/100/1000 base-T ports + 4 combo 10/100/1000Base-T/SFP ports + 4 10GE SFP+ ports - SI Image as per specification complete.
Supplying, fixing, and configuring 1-port mini-GBIC SX mutli-mode fibre transceiver (up to 550m, support 3.3V power) as per specification complete.
Supplying, installing & testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC.
Supplying and fixing tool-less Information Outlet (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO
Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP
Supplying and fixing rack mounted type 12 Ports, light guide unloaded interconnect unit with adapter panel for termination of optical fibre cables on wall/ provided U rack complete as per specification no. WG-NAS/ LIU
Supplying and fixing 1 x 6 duplex adapter panel - SC as per specification complete.
Supplying and fixing rack type 24 ports, light guide interconnect unit with adapter panel for termination of optical fibre cables on wall/ provided U rack complete as per specification no. WG-NAS/ LIU
Supplying and fixing SC/LC type Multimode Duplex Adapter as per specification compete
Supplying and fixing SC/LC type multimode pigtails (OM3) as per specification complete.
Supply Installation commissioning of 4 MP Full HD IP Dome /Bullet Camera Image Sensor 1/3" 4 megapixel progressivescan CMOS Effective Pixels 2304 (H) × 1296 (V) Electronic Shutter Speed Auto/Manual 1-1/100000 s Min. Illumination 0.5 lux F2.1 (Color); 0 lux (IR LEDs on IR Distance - nUp to 100 ft (30 m) Day/Night -auto (ICR)/Color/BW Backlight Compensation - BLC/HLC/DWDR White Balance - Auto/Manual Gain Control - Auto/Manual Noise Reduction - 3D Privacy Masking- Up to 4 areas Lens Focal Length- 2.8 mm Horizontal Angle of View 92° 86°-28 Compression H.265 (Main/High/Baseline Profile) /MJPEG Resolution 3 MP (2304×1296) 1080p Main Stream 4 MP ,30 fps 16x Digital zoom 60 fps, Resolution- Verifocal lens, 320 db Corridor Mode Support Network Protocol IPv4/IPv6 HTTP HTTPS TCP/IP UDP UPnP ICMP IGMP RTSP RTP SMTP NTP DHCP DNS PPPoE DDNS FTP IP Filter QoS Compatibility -nONVIF Profile S CGI Max. User Access 20 users Mobile App - for iPhone iPad Android Phone and Tablet Power Supply PoE (802.3af) 12 V DC Working Environment -22°F to 140°F (-30°C to 60°C); 10% to 100% RH condensing Ingress Protection IP66 Vandal Resistance - IK10 Regulatory FCC Part 15B Class B (3 years warranty)
Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 450x550x500 mm) as per specification No. WG-NAS/RAK
Supplying and fixing 15U wall mount rack (Dimension-DxWxH – 450x550x767 mm) as per specification No. WG-NAS/RAK
Supplying and fixing 22 U floor mount rack (Dimension-DxW – 800x600x 1176mm) as per specification No. WG-NAS/RAK
Supplying, fixing, and configuring 8-ports 10/100/1000Mbps unmanaged gigabit PoE Switch complete.
Supplying and erecting on line UPS pure sine wave of 1 kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins. battery backup, as per specification no. AP-UPS
Supplying Erecting and commissioning of Network Video Recorder of 32 Channels professional series 4K HD Network video /Audio input 16 ch ,Two way audio-1ch RCA Network Bandwidth 320 Mbps,(i/c @O/G),Remot use 128,protoed-p2p,U pup ,NTP,DHQ Video /Audio output -HDMI1/ VGA,1920X1080p / 60Hz,1280 X1024/60 Hz,1280X720/60,12MP/8MP/6MP/5MP/108,Recording,Res olation-OP/960P/P1/2CIF/all Audio output-LCH,RCA,16ch,playback corridor mode 3/4/5/7/9/10-/12/16/32, Deced format H265,h264,Live view/play back-12MP/8MP/6MP/5MP/4MP/3MP/108, Cay X1080P@30x12MP@25,4X4K@30,8X4M P,@30,16x1080P@ 30XHard Disk SATA -4S Interface up to 10 for each HDD,External Interference & network Interference 2RJ 45 TO 1000M self serial Interface,-1xR5485,USB-Front panel ,1x usb 20 rear panel -1 alum 16 ch,A16 um out 4 ch,power supply 12V PC Power consumption -12 W,without 10cnt (+14 fat+131 F) Environment Diamentions -humidity 590% RH (non considering)440 mm x 3 50 mm (17.3"x13.5"x2.0")(WXDXH)(Weight without HDD)<3.14 kg(6.9216),certification ( 3 Years Warranty)
Supply and Installation of 8 TB (7200 RPM) Surveillance hard disk 8 TB storage capacity with SATA support 6GB/s NCQ 64 MB cache 3.5 inches
Supply,Installation,Testing & Commissioning of Allir one Computer For Factor - All-in-one Processor Type Core i5 Family Processor Spec 2.3 GHz Ram 8 GB Memory Technology DDR4 Computer Memory Type GDDR4 Hard Drive Size 1 TB Hard Disk Description HDD hard Drive Interface Serial ATA SSD 256 GE Additional Graphics Coprocessor Intel UHD Graphics 630 Graphics Chipsel Standing Screen display Size 21.5 Inches Connectivity Type Bluetooth Wireless Type Bluetooth 801.11ac. Hardware Platform Windows Operating System Windows 10 Professional Warranty - 3 years
Supplying, Erecting, Testing & Commissioning of Full HD commercial display DISPLAY-Screen Size 55-inch Aspect Ratio 16:9 Backlight Scanning 100Hz Resolution 1920 x 1080 pixels Viewing Angle178°/178° TERMINAL- VIDEO IN RCA X 1 AUDIO IN (L/R) RCA Pin Type X 2 HDMI IN HDMI 1.4 X 3 USB Input USB 2.0 X 2 RS232C Yes HDMI CEC Yes VGA IN Yes PC AUDIO IN Yes (1) (Share with AC)
Supplying and erecting ISI marked modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete.
Supplying and installing HDMI cable low voltage grade as per specification as per specifications having 25 mtr cord length with male/female 19pin HDMI connectors as per requirements complete.
Estimate no : 132042/5 of 2022-2023 Providing HVAC systems & Air conditioning unit for Proposed Extended court building at District & Session Court Premises Shivajinagar Pune. Supplying and erecting HMS PVC conduit 25 mm dia. with PVC accessories on wall /ceiling as per specification No: WG-MA/CON.
Supplying and erecting HMS PVC conduit 32 mm dia. with PVC accessories on wall / ceiling as per specification No: WG-MA/CON.
Supplying, installing, testing and commissioning of split type variable speed inverter technology room Air conditioning unit 2 TR capacity having ISEER minimum 4.50 suitable to operate on 250V, 50 cycles, A.C. supply having 1 no. of air handling unit hi-wall/ floor mounting type complete with Refrigerants R410 A /R32 and copper condenser at position. specification no. APAC/ SAC
Supplying, installing, testing and commissioning of split type variable speed inverter technology room Airconditioning unit 1 TR having ISEER minimum 4.50 suitable to operate on capacity 250V, 50 cycles, A.C. supply having 1 no. of air handling unit hi-wall / floor mounting type complete with refrigerant R410A/R32 and copper condenser at position. specification no. APAC/ SAC
Supplying and erecting soft drawn copper pipe suitable for refrigeration system having 22 SWG thickness and inner dia / size 12 mm complete.
Supplying and erecting soft drawn copper pipe suitable for refrigeration system having 22 SWG thickness and inner dia / size 16 mm complete.
Supplying, erecting, testing and commissioning of 14 HP, VRF / VRV air conditioning system, out door unit (ODU) complying type-IV OEM standards working on HFC free refrigerant R410A or other required/suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. celcius and non stop cooling even at 56 deg. celsius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 metre operation in cooling mode with inverter based VRF/VRV technology microprocessor based control compressor starter/control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V ± 10%, 50 Hz, 3 phase power supply, internal copper refrigerant piping, internal wiring and first charge of refrigerant, etc. all housed in powder coated weather proof cabinet on provided angle iron frame or suitable foundation connected to the system in approved manner complete.
Supplying, erecting, testing and commissioning of 18 HP, VRF / VRV air conditioning system, out door unit (ODU) complying type-IV OEM standards working on HFC free refrigerant R410A or other required/suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. celcius and non stop cooling even at 56 deg. celsius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 metre operation in cooling mode with inverter based VRF/VRV technology microprocessor based control compressor starter/control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V ± 10%, 50 Hz, 3 phase power supply, internal copper refrigerant piping, internal wiring and first charge of refrigerant, etc. all housed in powder coated weather proof cabinet on provided angle iron frame or suitable foundation connected to the system in approved manner complete.
Supplying, erecting, testing and commissioning of 20 HP, VRF / VRV air conditioning system, out door unit (ODU) complying type-IV OEM standards working on HFC free refrigerant R410A or other required/suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. celcius and non stop cooling even at 56 deg. celsius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 metre operation in cooling mode with inverter based VRF/VRV technology microprocessor based control compressor starter/control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V ± 10%, 50 Hz, 3 phase power supply, internal copper refrigerant piping, internal wiring and first charge of refrigerant, etc. all housed in powder coated weather proof cabinet on provided angle iron frame or suitable foundation connected to the system in approved manner complete.
Supplying, installing, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette indor unit (IDU) compact / standard size of nominal cooling capacity 3.3TR ( 1165 cfm ) to 4.0TR ( 1218 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. Indoor Units complete with in-built drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for coastal area complete in all respects, to operate on 1-phase, 230V, 50Hz, AC input supply, consisting with any additional refrigerant and oil charge as per requirement during installation and connected to the system complete.
Supplying, installing, testing and commissioning of VRV / VRF based ductable type, high static indoor unit (IDU) having nominal cooling capacity of 8.0TR ( 3200 cfm ) having EER as per BEE standards and specifications with evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. having anti-corrosive coating suitable for coastal area, with suitable ceiling suspension arrangement, with an electronic control console and any additional refrigerant and oil charge as per requirement during installation connected with the system complete.
Supplying, erecting, testing and commissioning of fresh air intake system, ductable circular inline fresh air fan inlet unit having 1000 cfm capacity with maintaining the static pressure minimum 20 mm of Hg complete suitable to operate on 1ph, 230 V, 50Hz, A.C. supply.
Supplying and erecting circular flexible / rigid PVC pipe duct of size 80 mm dia, 4 mm thickness with required couplers, reducers, T-joints, Y-joints elbows and necessary supports etc with sealing complete with provided control/ air flow regulating valves / dampers, filters at position.
Supplying and erecting circular flexible / rigid PVC pipe duct of size 100 mm dia, 4 mm thickness with required couplers, reducers, T-joints, Y-joints elbows and necessary supports etc with sealing complete with provided control/ air flow regulating valves / dampers, filters at position.
Supplying and erecting circular flexible / rigid PVC pipe duct of size 150 mm dia, 4 mm thickness with required couplers, reducers, T-joints, Y-joints elbows and necessary supports etc with sealing complete with provided control/ air flow regulating valves / dampers, filters at position.
Carrying out core cutting of size 3" to 5" dia x 15" length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original.
Supplying, installing, testing and commissioning of cordless remote contol having colour LCD panel, real time clock, temperature limitation (16 to 30 degree Cent.), functions like filter clean reminder timer suitable to communicate with wired controller complete.
Supplying, installing, testing and commissioning of manually operated, opposed blade, duct mounted, flanged volume control dampers of required sizes in GI construction complete with operating mechanism, mounting arrangement, rubber refrigerant kits etc. complete.
Supply, fabrication, installation and testing of flexible canvass connections constructed between ductable unit / dampers / ducting of required size with fire resist flexible double canvas sleeve complete.
Providing adhesive thermal insulation for supply / return air duct with 19 mm nitrile rubber insulation having R-value as per the prevailing provisions in ECBC-2007.
Supplying and erecting tile type modular diffuser made from aluminium sheet complete with powder coated matching to the ceiling shade for provided suuply and return air.
Supplying and installing of high pressure grade required size copper connection Y or T- Joints / refnet for liquid and suction line complete erected on wall/ceiling with supports/raceways, Nitrile rubber insulation, painting etc. with brazing and testing for leakages confirming the normal operation of the VRV / VRF air conditioning system.
Supplying and erecting aluminium powder coated linear grill of suitable size for width length without collar dampers having matching colour with the existing false ceiling and suitable for deflection of 15/30/45 degree.
Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 41.3 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.
Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 34.9 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.
Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 28.6 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.
Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 22.2 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.
Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 19.1 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.
Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.
Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 12.7 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.
Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.
Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 12 mm for solar water heater system.
Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 16 mm for solar water heater system.
Supplying and erecting GI sheet 0.6 mm (24 SWG) to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint.
Providing and erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.
Providing and erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 300 mm width & 20 mm height complete with necessary hardware in approved manner.
Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (for pumps).
Estimate no : 132042/6 of 2022-2023 Providing LED street lighting for Proposed extended court building & Parking Building At District & Session Court Premises shivajinagar pune. Supplying and erecting Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV
Supplying and erecting Supplying and erecting LED Street light fitting suitable for above 40W to 48W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No . FG-ODF/FLS2.
Supplying, erecting and marking Supplying, erecting and marking SPMCB 0.5A to 5A in provided distribution board as per specification no. SW-SWR/MCB
Supplying and erecting Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.
Supplying, erecting & terminating Supplying, erecting & terminating XLPE armoured cable 2 core 6 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
Supplying and laying Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.
Providing and erecting Providing and erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL
Providing and erecting Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT
Providing and erecting Providing and erecting galvanised 1000mm double arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT
Providing Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP
Providing Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA-EP
M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole).
Estimate no : 132042/7 of 2022-2023 Providing Openwell submersible pumpset for Proposed extended court building at District & Session Court Premises Shivajinagar Pune. Supplying and erecting Supplying and erecting mains with 4x 4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
Supplying and erecting Supplying and erecting four pole metal clad ON LOAD change over switch 415V, 40A erected on angle iron / GI frame complete.
Supplying, erecting and marking Supplying, erecting and marking FPMCB 6A to 32A in provided distribution board as per specification no. SW-SWR/MCB
Supplying and erecting Supplying and erecting CRCA sheet metal one way enclosures suitable for DP MCB /TP MCB /FP MCB erected on angle iron/GI frame complete.
Supplying and erecting Supplying and erecting metal work in CRCA sheet with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.(1.2x1.2x1=2.88 sqm + 1.2x0.3x4=1.44 sqm total 4.32 sqm @ 18 guage 9.8 kg/sqm 4.32 x 9.8 = 42.33 kg say 42 kg)
Supplying and erecting Supplying and erecting GI sheet 1.6 mm (16 SWG) caution board of size 200 x 150 mm duly painted with red oxide and enamel paint in Marathi and Hindi erected at position for medium voltage installation.
Supplying and erecting Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.
Supplying, erecting & terminating Supplying, erecting & terminating XLPE armoured cable 4 core 4 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
Supplying and laying Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.
Providing Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP
Supplying and erecting Supplying and erecting submersible pump set suitable for erection on open well of 3.75 KW/5 HP with 415 V 50 c/s.A.C. supply, having delivery head from 24 to 13m. and discharge from 400 to 1000 Itrs. per minute (Max efficiency at 21m head & 680 Itr discharge) & pipe of Suction 50mm / Delivery 50 mm diameter erected with necessary H type clamps as per specification no. WP-OSP
Supplying and erecting Supplying and erecting automatic control panel for 3 Ph, 415 volt, A.c. Submersible/centrifugal pump set upto 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc
Supplying and erecting Supplying and erecting ISI mark GI pipe 50 mm dia.‘B’ class at position with accessories complete. Specification no. CW-PLB/GP.
Supplying and erecting Supplying and erecting 50 mm dia. gun metal sluice valve at position with necessary materials complete.
Supplying and erecting Supplying and erecting non return valve 50 mm dia in position made of gun metal complete.
Shubham EPC Private Limited
SYNERGY SKI INFRADEVELOPMENT
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid