Repair and Renovation of old building near Type V at Leimatak.

Amount

Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. b) Hard/Dense Soil.

Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering. f) 1:2:4(1 cement: 4 coarse sand: 4 graded stone aggregate 20mm nominal size).

Providing form works i/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4mt and removal of the same for in-situ reinforced concrete and plain concrete work in.4.1.7.1 columns, pillars, post and struts (square, rectangle or polygon in plan)

Steel Reinforcement for R.C.C work i/c bending and placing in position complete. b) Tor-steel bar.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement-All work upto plinth level 3.1.2) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chhajjas, lintels, bands, plain window sills, staircases and spiral staircases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand: 3 stone aggregate 20 mm nominal size).

Providing plinth protection 50 mm thick in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 stone aggregate 20mm nominal size) i.c. finishing the top surface of concrete smooth.

2nd class (local 1st class) brickwork in foundation and plinth in cement mortar 1:4 (1cement:4 coarse sand)

Half brickwork masonry 2nd class (local 1st class) in cement mortar 1:4 (1cement:4 coarse sand) in superstructure.

Extra for half brick masonry in superstructure above plinth (floor one level) to floor two level

12 mm cement plaster 1:4 (1cememt: 4 fine sand)

Neat cement punning

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering lead upto 50 m lift upto 1.5m.

Dismantling sheet roofing including ridges, hips, valleys, gutters etc. stacking the serviceable materials and disposal of unserviceable materials within 50 m lead: G.I sheet roofing.

Demolition above G.L upto floor two level including disposal of unserviceable material within 50 m lead: Unreinforced cement concrete upto 15 cm thickness.

25 mm cement concrete flooring 1:2:4 (1 cement:2 coarse sand: 4 stone aggregate 20 mm and down gauge) finished with a floating coat of neat cement.

50 mm cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand: 4 stone aggregate 20 mm and down gauge) finished with a floating coat of neat cement.

Painting (one or more coats) with plastic emulsion paint of approved quality on old work to give an even shade.

Finishing walls with water-proofing cement paint of approved quality on new work (two or more coats) to give an even shade.

Distempering with dry distemper of approved quality (one or more coats) to give an even shade on old work.

Distempering with dry distemper of approved quality (two or more coats) of required shade on new work i/c priming coat of whiting to give an even shade.

Providing wood work in frames of doors, windows, clerestory window and other frames, wrought framed and fixed in position. Local best quality Leihao.

P/F 20mm thick battened door and window shutters with necessary ledges and braces 25 mm i/c bright finished or / and black enamelled M.S. iron T-hinges with necessary screws. b) Local best quality Leihao.

Applying ready mixed priming coat pink primer of approved quality on wood work.

Painting two coats (excluding priming coat) with chocolate, red grey of buff paint of approved quality on new steel work or wood work.

Painting one coats with chocolate, red grey of buff paint of approved quality on old steel work or wood work.

Providing & fixing MS handles with necessary screws etc. complete. a) 100 mm

Providing & fixing MS Tower bolt (barrel type) with screws etc. complete. 100x10 mm

Providing & fixing MS sliding bolts bright finish or black enamelled with nuts & screws etc. complete. 250x16 mm

Providing & fixing water closet squatting pan (Indian type W.C. Pan) with 100 mm sand cast iron P or S trap, 10 litres low level white P.V.C flushing cistern including flush pipe manually controlled device (handle lever) conforming to IS: 7231 with all fitting and fixtures complete, including cutting and making good the wall and floors wherever required white vitreous china Orissa pattern W.C pan of size

Providing & fixing wash basin with C.I brackets, 15mm C.P brass pillar taps, 32mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White vitreous china wash basin size 550x400 mm with a pair of 15 mm C.P

Flexible (coil shape) PVC waste pipe for sink & wash basin with length not less than 700 mm including PVC waste fitting.

Providing & fixing mirror of superior glass (of approved quality) and of required shape & size with plastic moulded frame of approved make & shade with 6 mm thick hard board backing, Rectangular shape 453x357 mm

Providing & fixing G.I pipes complete with G.I fittings & clamps i/c cutting & making good the walls etc. (Internal work). a) 15 mm diameter

Fixing & re-fixing of glass panes bedded with putty & fixed with glazing panes excluding cost of glass panes.

Glass pane plain 3 mm thick.

Trapezoidal pre-painted profile sheet roofing of approved brand DYNA Roof or equivalent with self drilling screws of 68 mm long Xylon coated screws with PVC washer & caps complete, excluding the costs of purlin & trusses. Pre-painted Galvanized Iron Sheet (PPGL) i) Profile sheet 0.35 mm /2.8 kgs/sqm

Steel work welded in built-up sections, framed work in cutting, hoisting, fitting in position and priming coat of red lead paint 8.4.2 in beams and channels, angles, tees with connecting plates or angle cleats as in main and cross beams, hip & jack rafters, purlins connected to common rafters and the like.

Add EPF @ 3.25%

Add CESS @ 1%

Add GST @ 18%

M/S R.K.YAISKUL SINGH

M/S RK. BUDHACHANDRA SINGH