REPAIRS TO BOUNDARY WALL CHAIN LINK FENCING AND CONNECTED WORK UNDER AGE BRI OF GE NW NAVY NAGAR COLABA MUMBAI

Amount

Demolition of brick work or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete article complete including removal of unserviceable material out side MD land all as specified.

M & L brick work with sub class 'B' bricks (Old size) straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 all as specified.

M&L for precast cement concrete bonders, through stone (for stone walling) PCC 1:3:6 Type C1 including chamfers, weathering, throating etc, and setting in cement motar 1:6 complete with joints to match all as specified.

M&L cement concrete 1:2:4 type B-0 using 12.50 mm graded stone aggregate as in coping including necessary formwork complete.

Taking down cement plaster on brick or stone wall etc of any description including racking out joints, hacking for key, scrubbing down with water including removal of unserviceable material out side MOD land all as specified.

M&L plastering 20mm thick in CM 1:4 on brick or concrete surfaces on walls in two coats, first coat 10mm thick & second coat 10mm thick mixed with water proofing compound finished fair & even complete all as specified. (Note: WPC will be measured & paid separately).

M&L for preparing newly plastered surfaces of wall and soffits/sides of chajja/roof projection and applying two coats of acrylic paint exterior grade (100%Acrylic) over a coat of primer complete all as specified and directed by Engr-in-Charge.

Supply only water proofing compound ISI marked.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

M&L MS Angle iron post or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting or riveting etc and similar work confirming to /Fe 290 Gde E-165 complete all as specified and directed.

M & L PCC 1:2:4 type B1 ( 20 mm graded aggregate) Cement concrete in foundations, filling and mass-concrete etc complete all as specified and directed.

S & F in repairs heavy galvanised (W 10Z) chain link fencing of 50mm x 50mm nominal pitch and dia of wire 3.15mm complete all as specified and directed.

S&F in repairs galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails strain-ing bolts, including, tying at crossing with and provision of galvanised mild steel wire, staple or steel pins etc as directed by EIC (each line wire to be measured).

S&F in repairs barbed razor type concertina coil 9 SWG hot galvanised spring tensile wire of UTS 145 to 150 Newton per square mm zinc coating 250-300 grams per sqm dia of coil when unstretched 460 mm covering 8 to 10 running meter per coil and minimum weight of coil (GI strip) 1.625 kg per running metre hot dip galvanised razor ribbon tape of size 0.50 mm thickness, 19 mm wide before wrapping on central core wire fixed 1.66 mm thick GI clip minimum 25 nos per running metre and special nut bolt to hold two coils together and extra two rows parallel wire of 10 gauge complete all as specified and as directed .

Dismantling floor, hearth, or wall tiling incuding cement mortar bedding with backing etc and removal of unserviceable material out side MOD land all as specified.

Dismantling of Stone slabs/Paver block/Cement concrete tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar all as specified.

S & F designer wall tiles of 12 mm thick set & jointed in neat cement slurry & pointed in white cement mixed with colour pigment to match the colour of tiles over and including 10 mm thick cement plaster in CM 1:4 complete all as specified & directed by Engr-in- Charge. (Make: Duracrete/ Ultra Tiles) (Pattern and design of the tile shall be as per approval of Garrison Engineer (NW) ).

M&L for Machine pressed precast coloured glazed concrete interlocking paver block with grey cement & pigment, glossy finish (reflective type) any shape and size (as approved by GE) confirming to IS 15658-2006 of 100mm thickness, M-35 Grade, as in pavements to required level & gradients, set, jointed with clean dry sand and sealing the ends using PCC 1:2:4 etc complete (Sand cushioning shall be measured and paid separately).

M&L coloured glazed cement concrete tiles 300 x 300 x 25 mm thick, machine pressed , glossy finish (reflective type), any design (as approved by GE); set jointed and pointed in neat cement slurry over and including 20 mm thick cement screed in cm 1:6 complete (Note : Cost for 20 mm thick cement screed is inclussive in the rate, no separate payment to be made).

M&L for Sand filling under floors or in foundation including watering and consolidation etc complete.

M&L framed work such as grills, gratings, etc . with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.

M&L cement concrete 1:4:8 type D-2 using 40 mm graded aggregatge as in foundation filling and mass concrete complete all as specified and directed.

M&L Reinforced Cement concrete 1:2:4 type B-1 (using 20 mm graded aggregate) as in column footings etc complete all as specified and directed.

M&L Reinforced Cement concrete 1:2:4 type B-1 (using 20 mm graded aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns,and similar work; vertical or to batter complete all as specified and directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 28.00 above but 5 mm dia and over upto 10 mm dia as in stirrups etc.

M&L udaipur green/baroda marble slab 18-20 mm thick over cooking platform and similar work machine cut, bedded and jointed with grey cement slurry over and including 10 mm thick screed bed in cement mortar 1:3 and pointed with white cement using marble dust with admixture of pigment to match the shade of marble slab including grinding and polishing complete (Note : The rates included the cost of cement screed bed 10 mm thick) .

Preparing steel surfaces new or old over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

SRI SAIRAM COUNSTRUCTION

Unitech Enterprises

RAJU AND CO

ASHOK CONSTRUCTION

BOB ENTERPRISES

DHARMESH ENTERPRISES