REPAIR, REPAINTING OF STEEL FURNITURE, REPAIR/RECANNING, POLISHING OF WOODEN FURNITURE AT UNIT LINES, MD ACCN AND FURNITURE UNDER GE 869 AT LEIMAKHONG MIL STN.

Amount

REPAIRS TO FURNITURE

Removing existing unserviceable/ damaged tops from from the following tables and S&F with new top made out of 19mm thick commercial block board with 1mm thick plastic laminated sheet fixed on top and 4 mm thick teak wood beading provided all around the table top as per existing shape and size all as specified and shown on drg.

Table 3' x 2' with Drawer FD-224

Table 3' x 2' without Drawer FD-223

Table centre FD-235

Table Peg FD-277

Teapoy FD-278

Table dining 6 persons FD-273

Table dining 8 persons FD-273

Table writing FD-275

Table office clk steel FD-1004

Table office officer steel FD-1003

Teapoy Verandah FD-255

Table 900x600 mm with Drawer steel FD-1008

Table 900x600 mm without Drawer steel FD-1007

Table 900x900 mm steel FD-1009

Removing existing unserviceable/ damaged front and back long rail from from the following tables and S&F new front and back long rail of teak wood/ hollock/bonsum size, shape & design all as specified and shown on drg and applying all new surfaces with two coats of french polish with high gloss finish.

Table 3' x 2' with Drawer FD-224

Table 3' x 2' without Drawer FD-223

Table centre FD-235

Table Peg FD-277

Teapoy FD-278

Table dining 6 persons FD-273

Table dining 8 persons FD-273

Table writing FD-275

Removing existing unserviceable/ damaged short side rail from the following tables and S&F new short side rail of teak wood/ hollock/bonsum size, shape & design all as specified and shown on drg and applying all new surfaces with two coats of french polish with high gloss finish.

Table 3' x 2' with Drawer FD-224

Table 3' x 2' without Drawer FD-223

Table centre FD-235

Table Peg FD-277

Teapoy FD-278

Table dining 6 persons FD-273

Table dining 8 persons FD-273

Table writing FD-275

Removing existing unserviceable/ damaged legs from the following tables and S&F new leg of teak wood/ hollock/bonsum size, shape & design all as specified and shown on drg and applying all new surfaces with two coats of french polish with high gloss finish.

Table 3' x 2' with Drawer FD-224

Table 3' x 2' without Drawer FD-223

Table centre FD-235

Table Peg FD-277

Teapoy FD-278

Table dining 6 persons FD-273

Table dining 8 persons FD-273

Table writing FD-275

Removing the existing unserviceable front leg of following chair and S & F new Teak wood front leg as per drg and directed by the Engr-in- Charge

CHAIR DINING ( FD-279 & FD/E6/MAP)

CHAIR DINING MAP FD/MAP-II/05

CHAIR DINING OFFICER FD/MAP-II/04

CHAIR DINING LONG BACK ( FD-357)

CHAIR WRITING ( FD-280)

CHAIR EASY ( FD-229)

CHAIR EASY CUSHIONED ( FD-358)

Removing the existing unserviceable rear leg of following chair and S & F new Teak wood rear leg as per drg and directed by the Engr-in- Charge

CHAIR DINING ( FD-279 & FD/E6/MAP)

CHAIR DINING MAP FD/MAP-II/05

CHAIR DINING OFFICER FD/MAP-II/04

CHAIR DINING LONG BACK ( FD-357)

CHAIR WRITING ( FD-280)

CHAIR EASY ( FD-229)

CHAIR EASY CUSHIONED ( FD-358)

Removing the existing unserviceable front rails of following chair and S & F new Teak wood front rails as per drg and directed by the Engr-in- Charge

CHAIR DINING ( FD-279 & FD/E6/MAP)

CHAIR DINING MAP FD/MAP-II/05

CHAIR DINING OFFICER FD/MAP-II/04

CHAIR DINING LONG BACK ( FD-357)

CHAIR WRITING ( FD-280)

CHAIR EASY ( FD-229)

CHAIR EASY CUSHIONED ( FD-358)

Removing the existing unserviceable side rails of following chair and S & F new Teak wood side rails as per drg and directed by the Engr-in- Charge

CHAIR DINING ( FD-279 & FD/E6/MAP)

CHAIR DINING MAP FD/MAP-II/05

CHAIR DINING OFFICER FD/MAP-II/04

CHAIR DINING LONG BACK ( FD-357)

CHAIR WRITING ( FD-280)

CHAIR EASY ( FD-229)

CHAIR EASY CUSHIONED ( FD-358)

BED HARD STEEL OFFICERS FD/E6/MAP/08

Removing the existing unserviceable plywood from bed hard MS Square and preparation of old painted steel surfaces and applying one coat of synthetic enamel paint colour as approved by Garrison Engineer on all external and internal surfaces and fixing new plywood of bed hard MS Square as specified and as directed by Engr-in-Charge. Note : New plywood will be paid separately under respective item here-in-under

Supply only new plywood BWR Grade ISI marked of size 1980 mm x 900 mm including suitable nos of headless MS nut & bolt 6 mm dia 75 mm long with washer as directed by the Eng-in- charge

SOFA SET (FD-281)

Removing existing unserviceable tapestry cloth, cushion and replacing with new tapestry cloth with foam cushion 32 density 100mm thick, 500 x 530mm including covering with best quality tapestry cloth. Make - Sleepwell/Kurlon all as shown on drgs and as approved by GE. Note :- Each cushion for seat or back will be measured as single unit and tapestry cloth be not less than Rs.350/Mtr.

Removing existing unserviceable leg from Sofa and S&F new legs of teak wood/Hollock/Bonsum all as shown on drg and directed by Engr- in -Charge.

Removing existing unserviceable Arm rest from Sofa and S & F new arm rest of teak wood/Hollock/Bonsum all as shown on drawing and directed by Engr- in -Charge.

Removing existing unserviceable side rail from Sofa and S & F new teak wood/Hollock/Bonsum side rail all as shown on drawing and specified .

Removing existing unserviceable bearer from Sofa long pieces and S & F new teak wood/Hollock/Bonsum bearer all as shown on drawing and specified .

Removing existing unserviceable bearer from Sofa single pieces and S & F new teak wood/Hollock/Bonsum bearer all as shown on drawing and specified .

Removing existing unserviceable battens from Sofa and S & F new teak wood/Hollock/Bonsum battens all as shown on drawing and specified .

Removing existing unserviceable front rail from Sofa long pieces and S & F new teak wood/Hollock/Bonsum front rail all as shown on drawing and specified .

Removing existing unserviceable front rail from Sofa single pieces and S & F new teak wood/Hollock/Bonsum front rail all as shown on drawing and specified .

TABLE DRESSING WITH MIRROR GENTS. FD-230

Removing the existing unserviceable mirror and S & F new mirror 5 mm thick of make Modiguard /Swastik/Saint Gobain/Atul with back and frame all as specified and shown on drgs including with teak wood support of approved quality and shown on drgs

TABLE DRESSING WITH MIRROR LADIES FD-251

Removing the existing broken glass shutters and S&F new Glass shutters all as shown on drg (Each glass shutter shall be measured as single unit)

Removing the existing unserviceable Aluminium channel and S & F new Aluminium Channel all as shown on drgs

Removing existing unserviceable plywood portion of back of Mirror and S&F new back made out of 6 mm thick plywood for mirror all as shown on drgs

Removing the existing unserviceable mirror and S&F new mirror 5 mm thick of make Modiguard/Saint Gobain/Swastik/Atul with complete frame and back all as shown on drgs .

Removing the existing unserviceable 12mm ply wood from back and S&F new back of table dressing ladies made out of 12 mm thick plywood commercial quality all as shown on drgs and specified.

Preparing the wooden surface by scraping and filling bore holes with putty and rubbing by sand paper/Abrasive cloth thoroughly smooth and clean off and applying one coat of french polish to the required finishing :-

Table 900x600 with Drawer FD-248

Table Dressing Gents FD-251

Table Dressing Ladies FD-246

Bed plywood top FD-244

Chair dining FD-279

Chair dining Map FD/MAP-II/04

Chair Easy FD/Chair easy with cushion FD-250

Chair writing FD-233

Peg table FD-281

Sofa Set 4 Seater FD-281

Sofa Set 5 Seater FD-252

Stool Dressing FD-284

Table 900x600 W/O Drawer FD-235

Table Centre FD-239

Table dining 6 persons FD-239

Table dining 8 persons FD-273

Table office clk wooden DB-4120

Table office officer wooden WDF-32

Table writing FD-232

Teapoy FD-276

Removing the existing unserviceable cane from Chairs and recanning of chairs of all sorts i.e. chair dining , chair writing, chair easy, chair CBA wooden with arms, chair Bin soiled Linen large/small and Stool dressing etc, with best quality of plastic cane Make -Maharashtra/Swastik Industries of approved make. The plastic cane should be 1.80mm x 0.46 mm for weaving and 3 x 0.60 mm for beading as per Godrej pattern as specified and directed by Engr-in-charge. ( FD-279, FD-280, FD-229, DB-4124, DB-3972, FD-70 FD-252, FD-282, FD-374)

Chair Dining FD-279

Chair writing FD-280

Chair easy FD-229

Stool Dressing CB FD-282

LOCKER STEEL FD-1029

M&L for cleaning/preparing the existing surfaces ie. de-rusting, filling putty, denting of lockers steel including inner and outer surfaces and applying two coats of synthetic enamel paint by spray process to achieve a uniform finish as approved by Garrison Engineer and all as directed.

Removing the existing unserviceable/ damage/ broken legs for lockers steel and S&F with a new legs and applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the locker and providing rubber pad 3mm thick to legs all as specified and shown on drgs

Removing the existing unserviceable/ damaged shelves for locker steel and S&F MS sheet CRCA 1mm thick bent to shape and applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the locker/clips and all as specified and shown on drg.

Removing existing unserviceable hasp & staple of locker steel and S&F MS galvanised new hasp & staple all as specified and directed by Engr-in-Charge.

CHAIR DINING MAP (FD/MAP-II/05)

Removing existing unserviceable PVC seat from chair dining (MAP) and S&F new PVC seat of superior quality as approved by GE complete all as directed and shown on drgs

S&F 1st class hardwood stiffner of size 360x30x25mm in middle of the seat frame and fixed appropriately with 04 Nos bamboo pins to both side rails of chair dining all as specified and directed by Engr-in-Charge

ALMIRAH LARGE/MEDIUM STEEL (FD-1032 FD-1031).

Removing the existing unserviceable three way locking device and S&F three way locking device with cover all as directed by the Engr in Charge and shown on drgs for almirah large steel

All as per item No 18.01 herein before but almirah medium/small steel

Removing the existing unserviceable locks and S&F locks of appropriate size 6 levers with duplicate keys chromium plated Make Godrej/Lico or equivalent as suitable in almirah all as directed by Engr in Charge and shown on drgs for almirah large/medium steel. Notes : for item 22.01 to 22.03:- (i) Unit rate quoted shall include for provision/repairs to back plate cover to key hole back side cover locking device etc. (ii) Steel chromium plated handle shall be measured and paid separately.

Removing the existing unserviceable handle and S&F new chromium plated handle 125mm long to almirah large/medium/small steel all as specified/directed and shown on drg.

Preparation of old painted steel surfaces ie. de-rusting, filling putty, denting and applying two coats of synthetic enamel paint as approved by spray painting process on all external and internal surfaces of almirah large steel (Size 920 x 485 x 1985mm) all as specified and as directed by Engr-in-Charge.

All as per item No 18.05 herein before but almirah medium/small (760 x 440 x 1270).

Removing the existing unserviceable/ damaged/ broken legs for almirah large and S&F with a new legs made out of 18 G sheet and applying one coat of synthetic enamel paint over a coat of red oxide primer including welding to the almirahs and all as specified and shown on drgs.

Removing the existing unserviceable/ damage/ broken legs for almirah medium and S&F with a new legs made out of 18 G sheet and applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the almirahs and all as specified and shown on drgs.

TABLE OFFICE OFFICER STEEL FD-1002

M&L cleaning/preparing the existing surfaces of table office officer steel including inner surfaces of drawers and applying one coat of synthetic enamel paint as approved by Garrison Engineer by spray process to achieve a uniform finish and fixing new rubber toe for all legs all as directed.

Replacement of unserviceable locks with new one with duplicate keys as existing all as specified and shown on drg. (Make - Godrej or Lico or as approved by GE).

TABLE OFFICE CLK STEEL FD-1004, FD - 307

M&L cleaning /preparing the existing surfaces of table office clerks steel including inner surfaces of drawers steel and applying one coat of synthetic enamel paint as approved by Garrison Engineer by spray process to achieve a uniform finish and fixing Hard rubber shoe for legs all as directed.

Replacement of unserviceable locks with new one with duplicate keys as existing all as specified and shown on drg. (Make - Godrej or Lico or as approved by GE).

TABLE BED SIDE FD-230

Taking out old unsv components of Table bed side and S & F new compnents in replcement as per Shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge.

New front leg made out of 20mm dia steel square tube of wall thickness1.6mm all as specified and shown on drawing and as directed by Engr-in-Charge

New rear leg and top rail made out of 20mm dia steel square tube of wall thickness 1.6 mm all as specified and shown on drawing and as directed by Engr-in-Charge

New hard rubber shoes with inside steel washers for legs all as specified and shown on drawing and as directed by Engr-in-Charge

New drawers made out of 18mm thick pre-laminated particle board on front side and plywood sides and bottom including telescopic channels all as specified and as directed.

M & L for the rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying one coat of synthetic enamel paint black, complete all as specified.

CHAIR VERANDAH FD-19 (M):

Removing the existing unserviceable cane from Chair Verandah and recanning of chair verandah with best quality of Make Maharashtra/Swastik Industries of approved plastic cane 4mm wide as per trade pattern all as specified and directed

Painting to frame of chair verandah with one coat of synthetic enamel paint white colour as specified and shown on drawing and as directed

S&F new hard rubber toes of appropriate size suitable to chair verandah all as specified and shown on drawing and as directed

CHARPOY MS NCOs HARD TOP FD/MAP-II/01

Removing existing plywood from charpoy MS Square and preparation of old painted steel surfaces and spray painting one coat of synthetic enamel of colour as approved by GE on all external and internal surfaces and fixing new plywood of charpoy MS Square with headless MS nut & bolt 6 mm dia 75 mm length with washer all as specified and as directed by Engr-in-Charge. Note : New plywood shall be measured and paid for seperately under "Supplied only rates here-in-after.

Removing the existing plywood from charpoy MS Sqaure and S & F new plywood BWR Grade ISI marked of size 1980 mm x 900 mm with headless MS nut & bolt 6 mm dia 75 mm length with washer and directed by the Eng-in- charge

CHAIR WRITING STEEL MAP FD/E6/MAP/12

Removing existing seat from chair writing and S&F new seat of 12mm thick hot pressed plywood, upholstered with fabric and moulded polyurethane foam with PVC lipping all around of approx size 510x470x60mm thick complete all as speciifed and directed by Engr-in-Charge (Make: Godrej or equivalent as approved by GE

Removing existing back from chair writing and S&F new seat of 12mm thick hot pressed plywood, upholstered with fabric and moulded polyurethane foam with PVC lipping all around of approx size 510x470x60mm thick. The back foam shall be designed with contour lumbar support for extra comfort complete all as speciifed and directed by Engr-in-Charge (Make: Godrej or equivalent as approved by GE

Plate welding - Supply and welding 3mm thick 45mm dia MS bottom plate for chair writing steel all as shown on drawing and as directed by Engr-in-Charge (each base plate will be measured as single unit).

Removing existing unserviceable arms from chair writing steel and S&F new arms all as shown on drgs and as directed by Engr-in-Charge

SHARMA ENTERPRISE

KAILASH KUMAR LADHA

MAURYA CONSTRUCTIONS

MANI PRASAD GUPTA