Construction of Bed of DG Set Sheikhpora (Tulail Gurez) under TSP 2025-26

Amount

SITC of below mentioned items

Providing of Hydraulic crane to lift 380kVA DG set along with allied accessories from existing site at Wanpora Gurez and its unloading at new site bed at Sheikhpora.

Transportaion of 380kVA DG Set from Wanpora to Sheikhpora

400mm² single core Cable,1.1kV Grade, XLPE Insulated Stranded Conductor FRLS type

Manual Changeover Switch, 400 kVA (≈630 A), 4-pole (3P+N), 415 V, 50 Hz, AC-23A duty, break-before-make, mechanically interlocked, front rotary handle, IP54 enclosure along with MS Kisiosk housing.

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) includingdisposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge

Providing and Laying Dry stone Soling including Carraige Complete

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.50 mm thick with zinc coating not less than 275 gram/m2

Commissioning of 380kVA DG Set at new location Sheikhpora by a certified mechanic

DAR ELECTRICALS (BID ID -2610376)