job no 2423 re call

Amount

HSR 6.8 (a)/ Excavation for pipelines running under pressure in trenches and pits, in open areas, where disposal of surplus earth is done along with the alignment including trimming & dressing sides, leveling of beds of trenches to correct grade, cutting joint holes, cutting trees and bushes, etc., refilling consolidation and watering of refill in 15 cm layers and restoration of un-metaled or unpaved surface to its original condition, including the cost of dewatering of rain water, diversion of traffic, night signals, fixing caution boards, watching, fencing etc., and outside the town in ordinary soil: - (a) Without timbering and shoring up to 1.5 meters depth

HSR 10.41/ Cement concrete 1:2:4 with stone aggregate 20 mm nominal size in foundation and plinth

HSR 24.37/ Dismantling of road including soling and wearing coat, screening and stacking of old serviceable material, complete in all respect.

HSR 24.38/ Restoring the road cut, in level with the existing road surface, including preparation of subgrade laying and relaying of soling and laying and laying and consolidation of wearing coats to water bound macadam specification, and laying 20mm thick premix carpet, on top including cost of tack and seal coat, complete in all respects.

HSR 28.10 (e)/ Providing and fixing of cast iron double flanged sluice valves PN 1.6 marked with IS: 14846 including nuts & bolts marked with IS: 1363, Rubber Sheet marked with IS: 638 etc. carriage loading, unloading, stacking, handling, Re-handling etc. complete in all respect to the satisfaction of Engineer-in-Charge. (Makes AARKO, VENUS, LEADER, SI, PANJA, UPADHAY) (e) 250mm i/d

HSR 28.10 (f)/ 300mm i/d

HSR 28.13 (A) (c)/ Providing and fixing cast iron kinetic air valves conforming to and marked with IS: 14845, including carriage, loading, unloading stacking, handling, re-handling etc. drilling, tapping, and screwing in valves connections complete in all respects to the satisfaction of Engineer-in-Charge.

HSR 28.61 (iv)/ Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile iron (DI) ISI marked K-9 grade S&S pipes as per IS: 8329-2000 (amended up to date), with internal cement mortar lining for portable water with rubber ring (EPDM/SBR) joints as per IS: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of Engineer. Note: E/W to be measured and paid separately. (iv) 250 mm internal diameter

HSR 28.61 (v)/ 250mm internal diameter (Labour rate)

HSR 28.65 (i)/ Providing, lowering, laying aligning, fixing in position and jointing at all level/ depths DI standard specials plain/ flanged/ socketed confirming to IS-9523-2000 with rubber ring (EPDM/ SBR) joints such as tees, bends, tapers, caps etc. within trenches in DI pipe line complete including all material, labour, testing and commissioning along with pipe line as per technical specifications and as per direction of Engineer. (i) Up to 300mm dia.

N.S. Item/ Providing stringing out, jointing, cutting, testing, commissioning of 250mm internal diameter M.S. pipe of 10mm thickness and making connection with existing line at both ends and testing of spirally welded M.S. pipe made of MS sheet of ESSAR/ JINDAL/ TATA make only as per IS:2062, IS:3589-2001 and laying the same including welding cutting of the pipe etc. all material and labour as per requirement complete in all respect as per direction and satisfaction of Engineer-in-Charge.

N.S. Item/ Providing stringing out, jointing, cutting, testing, commissioning of 300mm internal diameter M.S. pipe of 12mm thickness and making connection with existing line at both ends and testing of spirally welded M.S. pipe made of MS sheet of ESSAR/ JINDAL/ TATA make only as per IS:2062, IS:3589-2001 and laying the same including welding cutting of the pipe etc. all material and labour as per requirement complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Paramjeet Janghu