ICAR-CIFA/Works/EFC /GE-Lab-Renovation/2026-27

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. For fixed portion. Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board or pre laminated HDHMR Board conforming to IS: 12823 Gradel Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated HDHMR board with decorative lamination on one side and balancing lamination on other side

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing and fixing wall hanging cupboard made up of 19mm thick solid plywood ( waterproof, termide proof) of following made Century/Austin/ Greenply etc.. The cupboard will be provided with storage space with two/three tire rack system as per the instruction. There will be openable door/sliding door. The exposed surface of the cupboard will be provided with 1 mm thick glossy / mat finished sunmica and inside surface with 0.8 mm thick white/offwhite sunmica. All hinges of the door system will be pneumatic/ hydraculic type of reputed make Hettich/Ebco/ Godrej/ Hafele etc.. The handle, locking system, channel etc. will be made up of stainless steel and of reputed make Hettich/Ebco/ Godrej/ Hafele etc.. The lipping teakwood beat/ matching colour beat will be provided along the peripheral area. The sanctional area 0.6 m x 0.45 m

Providing and fixing cupboard under R.C.C. slab made up of aluminium framed (Section 65mm x 40 mm) of reputed make Hindalco/ Alcoi/ Tostem etc. with solid framework. The door wil be provided with aluminiun framed 16mm thick solid plywood / ACP board. The cupboard will be provided with drawer/storage space as per the instruction and requirement with two/three tire storage space. All exposed surface / interior surface will be laminated with matching colour sunmica. The partioning of storage space will be made up of sunmica laminated 18mm solid ply / WPC board as per the instruction. All channel, hinges, handle, locking system etc. will be made up of stainless steel section and of reputed brand such as Hettich / Ebco / Godrej etc. Sectional area = 0.80 x 0.80

Making of central working table of size 2.70 m x 1.50 m x 0.9m (Height) with the following specifications:- * Table top will be 19mm thick solid plywood (Greenply / Century / Austin) with water resistance and terminite proof. * Middle and button horizontal part will be made up of 19 mm thick solid plywood pasted with matching sunmica. * Vertical part will be of 19 mm thick solid plywood of above mentioned brand with 1 mm thick sunmica on both side. *There will be provision of inside cupboard and drawer arrangement on both sides of the Lab table. All surface inside and outside will be pasted with 1 mm thick sunmica. Drawer will be fitted with telescopic channel and locking arrangement of cupboard and drawer will be of Hettich/ Godrej made. Cupboard will be provided with auto hinges / L- hinges of reputed brand (Hettich / Godrej) *There will be provision of chemical rack of height 0.60 m with top and middle rack arrangement made up 19mm thick solid plywood and all exposed & internal sunface will be pasted with 1 mm thick matching sunmica.

Making of instrumentation table of size 4m x 0.6m x 0.75m (hight) with front side elevation of 0.45 m with the following specification: *The structual part of table top, bottom, horizontal and vertical will be made up of 19 mm thick solid plywood of approved make (Century, Austin, Greenply waterproof of termite proof) *The exposed surface of the table (Horizontal/ vertical/partioning) will be pasted with 1mm thick sunmica of approved brand and colour. The internal surface of the table will be pasted with 0.8 mm thick offwhite/white sunmica. *There will be provision of inside cupboard and drawer arrangement. The drawer and cupboard will be made up of 19mm thick plywood of above mentioned meterial with sunmica pasted on entire sunmica. The drawer will be fitted with elescopic channel, locking arrangement, handle, auto hinges/L hinges of approved brand. *All hardware fitting such as handle, hinges, locking arrangement will be made up of stainless steel of approved brand such ashettich/Ebco/Godrej etc.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent