Completion of community hall Shey B phase final

Amount

Chequerred terrazo tiles 22mm thick with graded marble chips of size upto 6mm in floors jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) .Ordinary cement with dark shade

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and fixing 12mm thick plywood with 4" T&G including polish and all complete.

Distempering with oil bound washable distemper of approved brand anNew work (two or more coats) over and including priming coat with cement primer d manufacture to give an even shade

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand)

Earth work in execution by manual means in trenches for foundation drains, pipes, cables etc. (not exceeding 1.5 mtr depth) and for shafts , walls, cesspits and like not exceeding 10 Sqm on plan depth 1.5 mtr including disposal of excavator earth, up to 1 mtr from cutting edge ; disposed earth to be levelled and neatly dressed in : All kinds of soil

Random Rubble masonry with hard stone from nallah in foundation and plinth including levelling up with cement concrete 1 :6:12 ( 1 Cement: 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with 7.1A cement mortar 1:6 (1 Cement: 6 coarse sand)

Providing and laying damp-proof course 5Crnm thick with cement concrete 1:2:4 (1 cement : 2 co.:Hse sand 4 graded stone aggregate 20mm nominal size iA) Crushed

Providing and fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centring, shuttering and complete1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) (A) Crushed

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works . (25x5)mm flat iron.

Providing and fixing stainless steel (Grade 304) railingmade of Hollow tubes channels, plates etc.includingwelding ,grinding, buffing, polishing and making curvature(wherever required) and fitting the same with necessarystainless steel nuts and bolts complete,i/c fixing therailing with necessary accessories and stainless steeldash fasteners, stainless steel bolts etc. of required sizeon the top of the floor or the side of waist slab with suitablearrangement as per approval of Engineer-in-charge, (forpayment purpose only weight of stainless steel membersshall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.

carriage of cement from 8km by MT

carriage of sand and aggegrate from 10km by MT

Wiring for light point 6amp switch/socket/exhaust fan point / call bell point /with 1.5 Sq.mm PVC FR insulated copper conductor single core in surface/recessed medium class PVC conduit, suitable size MS box and earthing the point with 0.75 Sq.mm. FR PVC insulated copper conductor single core cable as required.

Wiring for 16 Amp Switch/socket with 2x2.5mm FR PVC insulated copper conductor single core cable in surface/ existing recessed PVC conduit along with 1 No. 0.75 Sq. mm FR PVC insulated copper conductor single core cable for looping earthing as required.

Supplying and drawing circuit wire for 16amp switch/socket outlet with 2x4 Sq.mm FR PVC insulated copper conductor single core cable in the recessed/surface PVC conduit along with 1 No. 0.75 Sq. mm FR PVC insulated copper conductor single core cable for looping earthing as required.

Supplying and fixing of 25mm PVC conduit casing capping along with accessories in surface/recessed including cutting the wall and making good the same in case of recessed conduit as required.

Supply and fixing of the following light fixtures including all accessories like electronic ballasts comps etc., complete as required 20w concealed/Tube lighting LED Luminaries as per Philips.

Supply and fixing of following size/ modules/GI box on surface in recess along with accessories modular base & cover plate for modular switches in recess as required. 2m plate

Supply and fixing of following size/ modules/GI box on surface in recess along with accessories modular base & cover plate for modular switches in recess as required. 3m plate

Supply and fixing of following size/ modules/GI box on surface in recess along with accessories modular base & cover plate for modular switches in recess as required. 6m plate

Supply and fixing of following size/ modules/GI box on surface in recess along with accessories modular base & cover plate for modular switches in recess as required. 12m plate

25 Sq. mm, 3.5 Core Armored

Wiring for changeover 100amp and installation with complete accessories and holes on the wall as required.

Supply and fixing of miniature circuit breaker of following poles in the existing MCB DB completed with connections testing and commissioning etc. as required: single pole 10/20 Amp.

Double Pole 63Amp.

Supply and Fixing of TV Cable R-G6 wire with cord and switch (TV/Switch) in recessed box, complete as required.

Supplying and fixing following way Horizontal, sheet steel, MCB distribution board, 425 v, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, power painted including earthing etc. As required. (But without MCB/RCCB/Isolator) MCB BOX TPN D/D (16 WAY)

Supplying and fixing of 45 watt LED Street Light complete with GI pipe bracket duly embedded along the parapet/wall.

M/S SONAM WANGMO

M/S SHABIR SHAH GOVT CONTRACTOR