Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.7 LAccepted-AOC | L1 | Accepted-AOC Work Order Issued | |
| 2 | L2₹12.0 L+₹1.2 L (11.4%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹13.1 L+₹2.3 L (21.7%)Rejected-Finance D NO 10 4 011 KANAKALAPETA YANAM 533464 | KONASEEMA | ANDHRA PRADESH | 533464 | L3 | Rejected-Finance Rejected | |
| 4 | L4₹13.1 L+₹2.4 L (22.3%)Rejected-Finance | L4 | Rejected-Finance Rejected | |
| 5 | L5₹13.2 L+₹2.4 L (22.8%)Rejected-Finance | L5 | Rejected-Finance Rejected |
Tender Value
₹13.6 L
EMD Value
₹27,199
Closing Date
14 Oct 2022, 3:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EE, PWD, Yanam
Chinta Street, PWD,Yanam
Improvements to the Dr. Zakir Hussain Govt. Primary School, Yanam
2022_PWDC2_11149_1
52/EEY/2022-23
Open Tender
Civil Works
Item Rate
90 days
Yanam
Please refer Tender documents.
2 documents required · 2 mandatory
₹525
₹27,199
22 Nov 2022
7 Oct 2022
17 Oct 2022
7 Oct 2022
14 Oct 2022
7 Oct 2022
Amount
14.1.1 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq.metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead - with cement mortar 1:4 (1 cement : 4fine sand).
14.43 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scrarches etc. complete.
13.48.1 Finishing with deluxe multi surface paint system for interiors and exteriors using primer as per manufacture's specification - Two or more coats applied on walls @ 1.25 ltr / 10 sqm over and including one coat of special primer applied @ 0.75 ltr / 10 sqm.
11.41.2C Providing and laying fully vitrified floor tiles of size 600 x600 mm (thickeness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make (Nitco /Rak / Johnson / Asian ) in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) , including grouting the joints with white cement and matching pigments etc., complete - size of tile 600 x 600mm - Commercial quality.
18.48A Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet outlet and overflow pipes but with out fittings and the base support for tank.
16.96 Supplying fixing and commisioning of Suguna / Texmo / Sharp 2 HP monoblock pumpset slow speed single phase motor. The rate include the cost of pumpset , pumpset fixing in position and test run etc. complete.
18.7.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.25 mm nominal outer dia Pipes.
18.7.4 Code No: 18.7.4: Providing and fixing Chlorinated Polyvinnyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete - internal work - exposed on wall - 32mm nominal outer dia pipes.
9.119 Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2nos.of 150mm long brackets of 15x15mm M.S.square tube, the vertical door profiles to be reinforced with 19x19mm M.S.square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification.
9.120.1 Providing and fixing to existing door frames - 30mm thick factory made solid panel PVC door shutter consisting of frame made out of M.S.tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, top & bottom rails . M.S.frame shall have a coat of steel primers of approved make and manufacture M.S.frame covered with 5mm thick heat moulded PVC 'C channel of size 30mm thickness, 110mm width out of which 90mm shall be flat and 20mm shall be tapered in 45 drgree angle on either side forming stiles; and 5mm thick , 110mm wide PVC sheet out of which 90mm shall be flat and 20mm shall be tapered on the inner side to form top and bottom rail and 130mm wide PVC sheet out of which 90mm shall be flat and 20mm shall be tapered on both sides to form lock rail.Top bottom and lock rails shall be provided either side of the panel. 10mm(5mmx 2) thick , 20mm wide cross PVC sheet shall be provided as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S.frame welded/sealed to the stiles & rails with 7mm (5mm + 2mm) thick x 15mm wide PVC sheet bending on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C channel using PVC solvent adhesive etc. complete manufactures specification & drawing.
14.54.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade - One or more coats on old work.
12.41.2 Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS: 13592 type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion, (i) single socketed pipes. 110mm .
12.42.6.2 Providing and fixing on wall face unplasticised- PVC moulded fittings / accessories for unplasticised rigid rain water pipes conforming to IS : type A including jointing with seal PVC 13592 ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Shoe (plain) 110mm shoe.
12.42.5.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised rigid PVC rain water pipes conforming toIS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - bend 87.5 degree - 10 mm bend
18.49.1 Providing and fixing C.P.brass bib cock of approved quality conforming to IS: 8931 - 15 mm nominal bore
17.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C flusing cistren, including flush pipe , manually controlled device (handle lever) conforming to IS : 7231 , with all fittings and fixtures complete , including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C.pan of size 580x440mm with integral type foot rests.
17.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C.pan) with seat and lid, 10 litre low level white P.V.C. flusing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS: 7231,with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required - W.C. pan with ISI marked white solid plastic seat and lid.
17.78.1 Providing and fixing CP brass health faucet of approved quality - 15 mm nominal bore.
4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).
11.39.1 Providing and laying rectified glazed ceramic flooring tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of commercial quality conforming to IS :15622 , of approved make ( Somany / Nitco / Johnson) in colours white, ivory, grey, fume red brown, laid on 20mm thick cement mortar 1:4 (1 cement : 4coarse sand) , including grouting the joints with white cement and matching pigments etc., complete.
12.80 Providing and fixing colour coated galvalume sheet of 550 M.P.A. yield of AZ 150 strength formed as per patterned steel rib profile with the depth of 31 mm pitch of 250 mm and overall width of 1060 mm and thickness 0.5mm with required J or C hook bolts and nuts 8mm dia G.S.paint and working etc., complete excluding the cost of purlin , rafter and truss etc.
19.33.1 Providing and fixing on wall/ column face unplasticed - PVC soil and waste pipes (type - B) conforming to IS : 13592- 1992 including jointing with seal ring conformation to IS : 5382 leaving 10mm gap for thermal expansion - single socked pipes -110mm diametre .
9.5.1.2Q Providing and fixing panelled or panelled and glazed shutters for doors, windows, and clerestory windows, including ISI marked M.S.pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately , all complete - Vegesa / Bandaru wood - 30 mm thick shutters .
9.7.1Q Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors , windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick - Vegesa / Bandaru wood.
17.7.2 Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps ,32 mm C.P.brass waste of standard pattern , including painting of fittings and brackets,cutting and making good the walls wherever required - white Vitreous China wash basin size 630 x 450 mm with a single 15 mm C.P.brass pillar taps.
17.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing - rectangular shape 453 x 357 mm.
1101 1.5sq.mm ISI maked, FRLS PVC insulated, single core copper conductor cable (multistrand)
1102 2.5sq.mm ISI maked,FRLS PVC insulated, single core copper conductor cable (multistrand).
1103 Supplying and fixig 4.0sq.mm ISI maked, FRLS PVC insulated, single core copper conductor cable (multistrand).
1.28.6 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required - 12 module.
1.27.4 Supplying and fixing following size/ modules , GI box recess etc. as required - 6 module (200 mm x 75 mm)
1.24.5 Supplying and fixing following modular switch / socket on the excluding modular plate etc. as required - 6 pin 15/16A socket outlet.
1.25 Supplying and fixing two module stepped type electronic fan connections but excluding modular plate etc as required
1.24.4 Supplying and fixing following modular switch / socket on the excluding modular plate etc. as required - 3 pin 5/6 A socket outlet.
1.24.3 Supplying and fixing following modular switch / socket on the excluding modular plate etc. as required - 15/16 A switch
1762 Supplying and fixing 12 way (4+36) ,TPN , vertical type,MCB DB, double door.
1714 Supplying and fixing 40 A, 4 pole isolator.
1206 Supplying and fixing 20 mm inspection / solid bends .
1218 Supplying and fixing 20 mm iron staples / saddles / screws.
1.21.2 Supplying and fixing of following sizes of medium class PVC cutting the wall and making good the same in case of recessed conduit as required - 25mm.
1217 Supplying and fixing 20 mm junction box , two way.
1.33 Supplying and fixing 3 pin , 5 A ceiling rose on the existing required.
1715 Supplying and fixing 63 A, 4 pole isolator.
2.10.1 Supplying and fixing 5 A to 32 A rating , 240/415 V, 10 kA, of following poles in the existing MCB DB complete with connections , testing and commissioning etc .as required. Single Pole
E387 Supplying and fixing 32-100A HRC fuselink.
3051-O 1 x 40W box type single tube light fitting with copper choke & starter without tube. Make: Philips/Bajaj
Kanakala Srinivasu
Davuluri Satyanarayana
kondamuri venkatarao
KONA VENKANNA BABU
sekhar
KANAKALA SATYANARAYANA
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .