Construction of the Section Office Building with Cash Collection Center for accommodating the AE / O and M / Town / Walajabad Section Office at Walajabad 33 KVSS premises in South / Kanchipuram Division of Kanchipuram EDC.

Amount

Dismantling the existing Damaged RCC slab in the existing Collection Center building and clearing the debris away from the site and handed over to the retrived materials at Department stores if any including cost of all labour, lead, lift, etc., complete as directed by the Engineer at site.

Dismantling the existing Damaged Pressed tiles & weathering course in the existing Collection Center building and clearing the debris away from the site and handed over to the retrived materials at Department stores if any including cost of all labour, lead, lift, etc., complete as directed by the Engineer at site.

Dismantling the existing Damaged AC sheet roofing without roof timbers in the existing Old Control room building and Consumers Waiting hall and clearing the debris away from the site and handed over to the retrived materials at Department stores if any including cost of all labour, lead, lift, etc., complete as directed by the Engineer at site.

Dismantling the existing Damaged Iron truss / purline in the existing Old Control room building / Consumers Waiting hall / Office Building and clearing the debris away from the site and handed over to the retrived materials at Department stores if any including cost of all labour, lead, lift, etc., complete as directed by the Engineer at site.

Dismantling the existing Damaged / unwanted Brick / stone masonry in lime / Cement mortar walls under 3m high in the existing Old Control room building / Consumers Waiting hall / Office Building and clearing the debris away from the site and handed over to the retrived materials at Department stores if any including cost of all labour, lead, lift, etc., complete as directed by the Engineer at site.

Dismantling the existing Damaged / unwanted Doors & windows including removal of frames, hinges and fastenings in the existing Old Control room building / Consumers Waiting hall / Office Building and clearing the debris away from the site and handed over to the retrived materials at Department stores if any including cost of all labour, lead, lift, etc., complete as directed by the Engineer at site.

Earth work excavation - HGS SS.20.B. - [ for narrow excavation ] - Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales,murram, gravel, stoney earth and earth mixed with small size boulders including clearing and levelling the site, etc., complete complying with standard specification and as directed by the Engineers at site.

Supplying and filling in foundation, basement, etc with crushed stone sand [ M.Sand ] in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the Engineers at site.

Refilling with excavated earth other than sand in foundation, basement, etc in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the Engineers at site.

Providing Cement Concrete 1 : 3 : 6 using 20 mm HBG metal for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification, including cost of all matrials, lead, lift, labour, etc., complete as directed by the Engineers at site.

Providing Reinforced Cement Concrete 1 : 1.5 : 3 using 12 to 20 mm HBG metal for al RCC works excluding cost of reinforcement grill and fabricating charges but including shuttering and centering for sides and soffits including necessary supports and strutting upto 3.29 M height in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre, laying of concrete, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary etc.,complete complying with standard specification, including cost of all matrials, lead, lift, labour, etc., complete as directed by the Engineers at site.

For Columns Footings - In Foundation and Basement

For Columns - In Foundation and Basement

For Columns - In Ground Floor and above

For Grade Beam - In Foundation

For Sill Slab - In Ground Floor and above

For RCC Lintel Beam - In Ground Floor and above

For RCC Sunshade and Loft - In Ground Floor and above

For RCC Roof Beam - In Ground Floor and above

For RCC Roof Slab - In Ground Floor and above

Providing M.S.barricade, 1.5m height using M.S.sheet 4mm thick, M.S.angle 50x50x8mm, Base channel 100x50 including cost of all materials, lead, lift, labour and erection, shifting to a new location after completing the works, Tools & Plants etc., complete.

Providing Brick work in Cement Mortar 1:5 using approved best quality II class Ground moulded chamber burnt bricks of size 9" x 4.5" x 3" including cost of all materials, lead, lift, labour, curing, etc., complete complying with standard specifiction and as directed by the Engineers at site.

In Foundation and Basement

In Ground Floor and above

Paving the floor with best approved quality Double charged Vertified tiles 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 of 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. including cost of all materials, lead, lift, labour, etc., completed as directed by the Engineers at site.

Paving the Toilet Floor with first quality design Ceramic tiles of 305 x 305 x 6 mm size of all colours laid over 20 mm thick cement mortar 1:3 base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment etc., complete complying with standard specification. and as directed by the Engineers at site.

Dadooing walls with printed design colour glazed tiles of size 300 x 450 x 8mm following best approved quality and colour set in Cement Mortar 1:2 10mm thick and pointing the joints with white cement mixed with colouring pigments neatly in all wall, curing, etc., complying with standard specification, including cost of all materials, lead, lift, labour, etc, complete as directed by the Engineers at site.

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the Engineer at site.

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm size with pure slaked lime to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification including cost of all materials, lead, lift, all labour, etc., complete as directed by the Engineers at site.

Paving the Top of roof with Solar refelective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3, 12mm thick and Providing and Filling the tile joint with epoxy grout with following specification: Surface preparation including cleaning the joint to be free from dust and loose particles. Providing masking tape on either side of the tile joint edges and providing sealing the tile gap with epoxy tile joint grout and finishing neatly, including cost of all materials, lead, lift, labour,curing etc., complete complying with standard specification and as directed by the Engineers at site.

Supplying and fixing in position best approved quality 110 mm dia PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. including cost of all materials, lead, lift, labour etc., complete as per standard specification and as directed by the Engineers at site.

Plastering with Cement Mortar 1:5, 12mm thick in all floors including cost of all materials, lead, lift, labour, curing etc. complete complying with standard specification and as directed by the Engineers at site.

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3, 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors including cost of all materials, lead, lift, labour, curing etc. complete complying with standard specification and as directed by the Engineers at site.

White washing one coat with freshly burnt white shell lime in all floors including cost of lime, blue powder, fevicol type gum, brushes, scaffolding charges, including cost of all materials, lead, lift, labour, etc., complete complying with standard specification and as directed by the Engineers at site.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., including cost of all materials, lead, lift, labour, etc., complete complying with standard specification and as directed by the Engineers at site

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of all materials, lead, lift, labour, etc., complete complying with standard specification and as directed by the Engineers at site.

Manufacturing, supplying and fixing in positon of RCC Jally of 50 mm thick in cement concrete 1:2:4 using 20mm machine crushed stone jelly including cost of reinforcement steel, cost of mould, finishing, curing, lifting, fixing in position etc., complete complying with standard specification and as directed by the Engineers at site.

Supplying and fixing the grills for the window opening with M.S. Angles / Flats / Sq. Rod as per standard specification and drawings, including cost of hinges, all materials, lead, lift, labour, fixing in position, scaffolding charge , etc., complete as directed by the Engineer at site.

UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.

Manufacturing, supplying and fixing of Steel Door (Single Leaf) with following specification. MS angle of size 40 x 40 x 6mm at 3.5 kg. / m used for outer frame and MS Angle of size 35 x 35 x 5mm at 2.6 kg. / m for the shutter frame. Stiffeners with 32 x 6mm at 1.5 kg. / m MS Flat is provided as the lock rail of the door and welded intact on both ends to the shutter frame. 18G GI Sheets of best quality is laid as panel in the shutter frames. 18 x 5mm at 0.70 kg. / m MS Flat is welded over the 32 x 6mm at 1.50 Kg. / m MS Flat on the rear side of the door, sandwitching the CR Sheet for rigidity. Additional stiffeners with 18 x 5mm at 0.7 Kg. / m MS Flats are provided diagonally on the rear side of the shutter. 300mm length of hinges 2 Nos. for shtter is provided. 6 Nos. of 200mm length hold fasts specified at the ends are welded to the outer frame of the door. Tower bolt 2 Nos. at the top provided. 250 x 16mm size of two aldrops are provided in single leaf door at lock rail section in the door for inner and outer provided and one rotating locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear sideof the door at an appropriate place and 1 No. of MS handle of heavy duty. A tie bar is provided at the bottom of the outer frame to prevent twisting of the frame during transportation and fixing. All members are given one coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation, taxes and all other incidental charges, etc., complete, complying with standard specifications. (Single Leaf)

Supplying and fabricating and fixing in position Aluminium Anodised Partly Top 1/2 Glalzed and Partly Bottom 1/2 Panelled Door and Frame made out of box section 101.60 x 44.45 x 3.18mm thick at 2.319 kg.\m door shutter made out of box section 47.10 x 44.45 x 2.5mm at 1.202 kg.\m for vertical style and top, lock rail sections of size 50 x 44.50 x 2.5mm at 1.292 kg./m and bottom 100.40 x 44.45 x 2.50mm at 1.974 kg.\m using clips of size 17.15 x 17.27 x 1.5mm at 0.176 kg.\m with necessary metal screws, rubber beading, strike plate type handle of size 100 x 30 x 1.60mm at 0.988 kg.\m on both sides, tower bolts, lock pivot arrangements and top 1/2 portion with 5.50mm thick plain glass and bottom 1/2 portion with one side prelaminated board (MDF) 12mm thick for panel portion with 1 No. of hydraulic door closers of approved quality using aluminium extruded section body tubler type universal with double speed adjustment with ISI monogram including cost of furniture fitting such as pivot, hinges, tower bolt, lock, door stopper and all materials, labour, power consumption required for fabrication, drilling required for fabrication, drilling holes in RCC columns, floor slabs masonry wall wherever necessary with power drills to the required extent and make the same to original condition after fixing and as directed. All the aluminium sections are to be anodised with matt finish under electrically controlled condition in accordance with IS 1868-1962 for an average anodic flim thickness of 15 microns etc., complete. The materials should be got approved by the Executive Engineer before use on works. The rate shall be inclusive of all materials, labour for fixing, transportation loading, unloading and all other incidential charges. (Single Leaf Door)

Supplying and fixing 30mm thick Solid Core PVC Door Shutter with PVC frame of size 50 x 45mm with suitable rebate for housing the shutter (conforming to IS 4020 with updated amendment) consisting of frame made out of MS tubes 19 gauge thickness and size of 19 x 19mm for styles and 15 x 15mm for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded PVC ‘C' channel of size 30 x 50mm forming styles, and 75 x 50mm for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2) thick 20mm wide cross PVC sheet as gap insert for top rail, bottom rail. Paneling of 5mm thick PVC sheet bearing on either side and join together other side etc. An additional 5mm thick PVC strip of 20mm width is to be stack and the interior side of the ‘C' channel using PVC sealant adhesive including cost of all furniture fittings such as aluminium aldrop of size 250 x 16mm-1 No., aluminium tower bolt 250 x 12mm-1 No., aluminium 'D' type handle 200mm-1 No., etc., complete, as directed by Departmental Engineer and drawing.

Supplying and erecting approved and good quality pull and push type Rolling Shutter with ISI make of required size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, including cost of all materials lead, lift and transportation charges etc., complete as directed by the Engineers at site.

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm colour glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with crushed stone sandcushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specification and as directed by the Engineers at site.

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the Engineers at site.

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification and as directed by the Engineers at site.

Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specification and as directed by the Engineers at site.

Supplying and fixing approved best quality aluminium anodised towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specification and as directed by the Engineers at site.

Supplying and fixing position PVC Nahani Trap / Floor Trap of size 100 x 75 mm with best PVC gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 [ One part of lime, two part of crushed stone sand and five part of brick jelly ] and finished with Cement Mortar 1:3, including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, including cost of all materials, lead, lift, labour,etc., complete complying with standard specification and as directed by the Engineers at site.

Supplying and fixing in position best quality PVC soil / waste pipes of 110 mm dia having 6 kg / sq.cm. pressure of approved quality and make and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, including cost of all materials, required PVS specials, lead, lift, labour, etc., complete complying with standard specifications and as directed by the Engineers at site.

Supplying, laying and jointing UPVC pipes [ 10 kg. / sq.cm ] of approved quality for the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives including the cost of UPVC specials and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, including cost of all materials, lead, lift, labour,etc., complete complying with standard specifications and as directed by the Engineers at site.

15 mm dia UPVC pipe [10 kg / Sq.cm]

20 mm dia UPVC pipe [10 kg / Sq.cm]

25 mm dia UPVC pipe [10 kg / Sq.cm]

32 mm dia UPVC pipe [10 kg / Sq.cm]

40 mm dia UPVC pipe [10 kg / Sq.cm]

Supplying and fixing in position of approved best quality 1000 litres PVC water tank [ three layers ] including cost of necessary bed, connecting tank nipple transporting, fixing in position, all lead, lift, labour, etc., complete, complying with standard specification and as directed by the Engineers at site.

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve of the following dia including cost of all materials, lead, lift, labour, shellac, thread balls, etc., complete complying with standard specifications and as directed by the Engineers at site.

20 mm dia Gun Metal Gate Valve

25 mm dia Gun Metal Gate Valve

32 mm dia Gun Metal Gate Valve

40 mm dia Gun Metal Gate Valve

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make and quality including cost of all materials, lead, lift, labour, shellac, thread balls, etc., complete complying with standard specifications and as directed by the Engineers at site.

Supplying and Providing open wiring to the light points, tube light points, bulk head points with approved quality 2 x 2.5 sq.mm PVC unsheathed SC copper cable of 650v grade along with 14 SWG TC wire for earthing inside the suitable PVC rigid pipe with necessary bends, tees, junction box, ceiling house, houlders, etc, 5 Amps. single pole switch of approved quality fixing in a 3 mm thick hylum sheet cover with T.W. switch box of suitable size, etc, including cost of all materials, lead, lift, labour, etc., complete as directed by the Engineer at site and jointing properly and making required holes in masonry or concrete and restoring the dismantled surface to original condition complete in all aspects.

Supplying and Providing open wiring to the 5 Amps. plug points,with approved quality 2 x 2.5 sq.mm PVC unsheathed SC copper cable of 650v grade along with 14 SWG TC wire for earthing inside the suitable PVC rigid pipe with necessary bends, tees, junction box, etc, 5 Amps. single pole switch and 3/5 pin plug of approved quality fixing in a 3 mm thick hylum sheet cover with T.W. switch box of suitable size, etc, including cost of all materials, lead, lift, labour, etc., complete as directed by the Engineer at site and jointing properly and making required holes in masonry or concrete and restoring the dismantled surface to original condition complete in all aspects.

Supplying and fixing and testing of 4' 20 W LED Fittings with LED of reputed make fixing in the wall / ceiling with all connection properly including cost of all materials, lead, lift, labour, etc., complete as directed by the Engineer at site.

Supplying and fixing and testing of A.C. Ceiling fan complete 1200mm (48") sweep with Down rod, regulator of approved quality fixing in the existing pipe / ceiling with all connection properly including cost of all materials, lead, lift, labour, etc., complete as directed by the Engineer at site.

Supplying and fixing the Industrial type horizontal three phase distribution board with MCBS 4 way / 18 way TPMCB sheet steel distribution boards flush type / surface type fitted with bus bars and ntural links with threephase MCB outgoings and separate 4 way provision for accommodating one no 4 pole incoming MCB / Isolator and another separate 4 way provision for accommodating one no. 4 pole ELCB / RCD of approved quality and make and provisions for taking up vable for size not less thn 35 Sq.mm on suitable angle iron frame work MS cble entry boxes with PWD earthing, fixing on the wall with all connection properly including cost of all materials, lead, lift, labour, etc., complete as directed by the Engineer at site.

GST for bidders within TamilNadu

GST for bidders outside TamilNadu (IGST)

M.Manimaan

K RAJARAM