Quantum of work involved in Shifting of Existing Diff. Lines at T06-NH-25 to Mangat Kahera via Jamuka Padari Kalan (Part-1), Unnao due to Road widening under P.M.G.S.Y. by FDR Technology under the area of EDD-I, Unnao. (Turnkey basis)

Amount

PART-A: Supply of Following materials (All taxes includes with GST)

S.T.P. Pole 11 mtr

11 KV Disc Insulator B&S Type

11 KV Disc Fitting

11 KV Pin Insulator

11 KV Pin with Nuts

X-arm M.S. Angle 65x65x6 mm V-Type

Cross Arm holding clamp with N&B

F-Bracket

M.S. T-off Channel

Clamp for T-off Channel

Red Oxide Paint

Alluminium Paint

Alluminium Tape

Number Plate

Bolt, Nuts & washers all sizes

Earthing Complete

Stay Complete

ACSR Weasel Conductor

Guarding Angle

G.I. Wire 06/10 No. swg

Holding clamp for Guarding Angle with N&B

PCC Pole 8.5 mtr long

LT A.B. Cable size 3x95+1x70+1x16 sq mm

LT A.B. Cable size 1x16 sq mm

L.T. Shackle Insulator

Bolt & Nut for Shackle Insulator

L.T. Clamp with Nuts & Bolts

Distribution Box

Clamp for Distribution Box with N&B

Piercing Connector

Stay Complete

Part- B : Work for Construction of line (Extra GST applicable as per Govt rules)

Erriection of ST Single Pole 11 mtr long with accessories including digging of pits fitting of all accessories along with cartage and dragging from dump site to pit with fitting of accessories.

Erriection of PCC Pole 8.5 mtr long with accessories including digging of pits fitting of all accessories along with cartage and dragging from dump site to pit with fitting of accessories.

Making T-off arrangement including fabrication & fitting of accessories.

Grouting of ST/PCC Pole as per RESPO Norms with grouting material

Earthing of ST pole as per RESPO Norms

Digging of pits fixing nuzzling of stay rod along with grouting of material as per RESPO Norms.

Painting of ST pole with one coat of red oxide and two coat of enamel paint ISI mark.

Stringing and sagging of 2 wire of 6 SWG GI wire for guarding and making lacing at one meter part in all span between all support including carriage from dump site to pit site.

Laying Stringing and sagging of 3 phase 11 KV line by ACSR Weasel conductor including all associated works and making clearance of road with joints/ jumpers and binding on insulator as required

Laying Stringing and sagging of 3 phase L.T. line by A.B. conductor including all associated works and making clearance of road with joints/ jumpers and binding on insulator as required

Laying Stringing and sagging of 1 phase L.T. line by A.B. conductor including all associated works and making clearance of road with joints/ jumpers and binding on insulator as required

Fixing of 3-Phase Distribution Box with clamp, N&B

Dismentling of 11 K.V. & L.T. line with existing pole including rolling back its conductor/G.I. wire from work site to dump site.

Disconnection and Reconnection of existing consumer

HARVITEC ENTERPRISES PVT LTD