Modification of Conference Room And Two Other Rooms at Floor No. 5 and 6 (Technical Building).Job No. 948/DPPS.

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary a) On timber or plastered surface With super gloss (hi-gloss) - Two coats (with any shade except white).

Removing old scales, blisters etc. of interior surface of walls, ceiling by scraping etc. and preparing smooth and even surface with rendering or cement mortar (1:2) (as necessary), to make the surface suitable for receiving distemper. (Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge).

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of the EIC. i)Water based interior grade Acrylic Primer (a) One Coat.

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : Two coats) : plastered surface iv) Two coats (i) Luxury Quality).

Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick).

Supplying bubbles free float glass of approved make and brand conforming to IS: 2835-1987. i) 4mm thick clear glass.

Exposed False-ceiling Work - Supplying ,fitting & fixing Eco-friendly, Moisture Resistant and Incombustible Gypsum plaster board/tiles (Density > 700Kg per Cu. m.) conforming to IS 2095- Part 1, 2011 of size 595mm X595mm of approved design and brand placed in the Grid module to form a false ceiling all complete as per drawing & direction of Engineer - in- Charge. (ii) 12.5mm thick Square edged Gypsum Plaster Board / tiles.

Cleaning and removing paint mark from glass pane with spirit and removing strains etc.

Washing and cleaning with soap water and rubbing with oil cloth in all types of floor and dado.

Supplying Heavy Duty Aluminium Handle (EBCO Type) (Natural White).

Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia. rod with centre bolt and round fitting. b) 250mm long.

Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws: (ix) 125 x 75 x 4.0mm.

Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: (vi) 200mm long x 10mm dia. bolt.

Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well-seasoned timber 65mm wide each and the entire frame fitted with 37.5 mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol form aldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor. (a) 35 mm thick shutters.

Supplying, fitting & fixing of Aluminium fixed partion wall of all aluminium sections viz top, bottom and side member, intermediate member, glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, anodized conforming to IS:1868 1983, fitted with all other accessories viz. EPDM gasket, cleat, angle screws etc. including labour charges for fitting and fixing of aluminium fixed partition wall with 4mm thick solid ACP board (weight not less than 5.50 kg/SqM ) all complete as per architectural drawings and direction of Engineer-in-charge. 10-12 Micron thickness Anodizing film. Natural white. a) For unsupported length of vertical member up to 1.50 m. height of both ends of vertical member restrained but panel within 0.90 sqm. unit wt. of Top, bottom & side member @1.366kg/m; intermediate member @ 1.443 kg/m; glazing clip: 0.167 kg/m respectively).

Supplying profiles of required section made of Aluminium Alloy Extrusions conforming toIS:732-1983 and IS:1285-1975; Anodized (with required film thickness and specified colour/natural ) matt finished conforming to IS:1868-1983 for fabrication of composite door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed/certified make and brand as per direction of Engineer -In Charge. (A) In 10-12 Micron thickness Annodizing film (I) Natural white k) Movable door shutter. i) Door frame. (Top & sides).

ii) Shutter: Top Rail.

Bottom Rail.

Lock Rail.

Door vertical.

Dismantling carefully wooden walling, flooring of ceiling and stacking dismantled materials as directed.

Supplying fitting, fixing decorative lamination conforming to IS:2046 :1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/ MDF/ Ply Boards with recommended/ app- roved adhesive with proper clipping the sides for better attachment as per direction of Engineer-in charge. The rate includes the cost of labour, adhesive and all incident all charges thereof. In ground floor. Glossy/ Matt/ Suede excluding surface texture or metallic lustre. (i) Thickness of laminate 1.50 mm.

Supplying and affixing optically clear polyester sun control window film having acrylic pressure sensitive adhesive on one side & an acrylic abrasion resistant coating on the other, with composition of infrared absorbing carbon & free from any optical defect. The film characteristics should conform to ASTME308, ASTME903, ASTME84 and ASHIRAE. The film should be pasted after preparatory works-without any cracking, delamination, bubbling, discolouring and variation in total transmission of light across the width at any portion along the length doesn't exceed 2% over the average including scaffolding & relevant others to complete in all respect as per manufacturer's specification & direction of Engineer-in-Charge. a) Normal Quality: Film Thickness -1.0 Mil, Glare Reduction > 45%, U factor < 1.15.

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete, Iron Butt Hinges and M.S clamps. (d) Sal: Local.

Partition of commercial ply as per design fitted and fixed complete. (Excluding the supporting framework but including necessary teak wood battens of size 40mmx 25 mm): In Ground Floor (i) 4mm thick.

Door stopper (Anodised aluminium).

Supplying Aluminium casted body hydraulic door closer as per I.S.I.

Please Enable Macros to View BoQ information