Construction of 2x3 meter span RCC Box culvert at gram panchayat lakshipur sotiya nala link road in Gonda district

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-in-charge within a distance of 60 meters(200 feet) (SOR SI No.692)

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401

PCC M-15 Grade leveling course below Foundation and approach slab complete as per drawing and Technical specification

Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M-30 Foundation

Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M-30 Sub Struture

Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M-30 Super Structure

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation/Substructure/Superstructure complete as per drawing and technical specifications. Foundation

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation/Substructure/Superstructure complete as per drawing and technical specifications. Sub Struture

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation/Substructure/Superstructure complete as per drawing and technical specifications. uper Structure

Providing and laying Cement concrete wearing coat M-35 grade including reinforcement complete as per drawing and Technical Specifications

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications

Back filling behind abutment, wing wall and return wall complete as per drawing and Technical Specification

Reinforced cement concrete approach slab including reinforcement and formwork complete as per drawing and Technical specification

Driange spout complete as per drawing and technical specifcations clause 1209

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.

PCC M-10 Grade leveling course below Foundation and approach slab complete as per drawing and Technical specification

Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification.

Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications

Construction of embankment with approved material obtained form borrow pits with a lift upto 1.5 m transporting to stite spreading, grading to required slope and compacting meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as Technical Specification Clause 301.5

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401

Providing, laying, spreading and compacting stone aggregates of 45-63mm to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, screening Type-B to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405.

Providing, laying, spreading and compacting stone aggregates of 22.4-53mm size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, screening Type-B to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.

Brick edging on both side of theS.O.B. brick 8 cm. (3") wide and 12 cm. (4 1/2) deep laid with mud mortar all labour finished to the required template and in proper alignment and also including dressing and ramming the excavated earth including all labour T & P sudries required for proper completion of the work as per S.O.R. 2014 S.I. No. 765

Providing and applying primer coat with SS2 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.

Providing and applying tack coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.

Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or cut-back or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades to be followed by seal coat of either Type-C as per Technical Specification Clause.511

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C, as per Technical Specification Clause 510

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2

Providing and laying Sign Board, Km/Hectometer Stone all complete as per direction of E/I

Construction of embankment with approved material obtained form borrow pits with a lift upto 1.5 m transporting to stite spreading, grading to required slope and compacting meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as Technical Specification Clause 301.5

Supply of 900 mm dia NP-3, S&S Hume Pipe including cartage upto site laoding, unloading and all Taxes etc.

First class brick solling on edge flooring laid dry joints sand filled including preparation of base to proper slop and its ramming and including supply of all materials labour and T&P etc. SI no 615.

Please Enable Macros to View BoQ information