Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.7 LAccepted-AOC H NO 496 SECTOR 10 GURGAON 122001 HARYANA | GURGAON | GURGAON | HARYANA | 122001 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹31.8 L+₹2.1 L (7.02%)Rejected-Finance 13 218 MASJID EXTEN SADAR BAZAR | L2 | Rejected-Finance Not Lowest Bidder | |
| 3 | L3₹35.1 L+₹5.4 L (18.2%)Rejected-Finance | L3 | Rejected-Finance Not Lowest Bidder | |
| 4 | L4₹36.1 L+₹6.4 L (21.5%)Rejected-Finance H NO 82 C BLOCK NO CC SHALIMAR BAGH DELHI 110088 | DELHI | NORTH DELHI | DELHI | 110088 | L4 | Rejected-Finance Not Lowest Bidder |
Tender Value
₹36.8 L
EMD Value
₹73,500
Closing Date
8 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE South Delhi Cantt 110010
Garrison Engineer South Delhi Cantt 110010
PROVN OF REVENUE WORK AND CERTAIN MINOR WORKS UNDER AGE B/R-II AND AGE E/M OF GE (SOUTH) DELHI CANTT-10
2022_MES_550890_1
GE/DS-70/2022-23
Open Tender
Civil Works
Item Rate
120 days
GE South Delhi Cantt
Please refer Tender documents.
11 documents required · 11 mandatory
₹500
GE South Delhi Cantt
₹73,500
Yes
16 Nov 2022
9 Sept 2022
10 Oct 2022
9 Sept 2022
8 Oct 2022
24 Sept 2022
Amount
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed by Engr-in-Charge.
Surface dressing n exc 15 cm deep complete all as specified and directed by Engr-in-Charge.
Excavation in trenches n exc 1.5m in deepth and 1.5m in width and getting out in soft/loose soil complete all as specified and directed by Engr-in-Charge.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil complete all as specified and directed by Engr-in-Charge.
Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.
M&L for hardcore (broken stone boulders) of gauge n.exc. 63mm mm deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface for plinth protection/path etc complete all as specified and directed by Engr-in-Charge.
M&L for cement concrete type B-1, 1:2:4 using 20 mm graded stone aggregate as in holdfasts, coping on edges etc including weathering slightly rounded or chamfered angles and throating as directed including necessary formwork complete all as specified and directed by Engr-in-Charge.
M&L for cement concrete 1:3:6 type C2 (using 40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed by Engr-in-Charge.
M&L cement concrete type B2, 1:2:4 (40mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed by Engr-in-Charge.
M&L cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in roof kerbs or mud stops rounded or chamfered on edges complete all as specified and directed by Engr-in-Charge.
M&L for cement concrete type D2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed by Engr-in-Charge.
M&L for providing reinforcement cement concrete cement concrete M-20 (1:1.5:3) (Nominal Mix) 20 mm stone aggrigate as in footing, foundation, beams, plinth beams, base for columns and mass concrete etc complete all as specified and directed by Engr-in-Charge.
M&L for providing reinforcement cement concrete M-20 (1:1.5:3) (Nominal Mix) 20 mm stone aggrigate as in columns and pillars etc complete all as specified and directed by Engr-in-Charge.
M&L for providing reinforcement cement concrete M-20 (1:1.5:3) (Nominal Mix) 20 mm stone aggrigate as in Beams, cantilevers, ressummers, lintels over 1.5m span concrete etc complete all as specified and directed by Engr-in-Charge.
M&L for providing reinforcement cement concrete M-25 (Nominal Mix) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-Charge.
M&L for cement concrete (1:4:8) Type D-2, (40 mm graded stone aggregate), 100 mm thick, as sub-base and similar works complete all as specified and directed by Engr-in-Charge.
M&L for 75 mm thick Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base to floors finished fair and even complete all as specified and directed by Engr-in-Charge.
M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate)finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and directed by Engr-in-Charge.
M&L for 75 mm thick PCC 1:2:4 type C1 (20 mm aggregate) as in hardstanding/footpath finished even and fair, laid in alternate panels complete all as specified and directed by Engr-in-Charge.
Demolition of brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified and directed by Engr-in-Charge.
M&L for brick work with sub class ‘B’ old size bricks, straight or curved on plan exc 6.0m mean radius built in cement mortar 1:4, complete all as specified and directed by Engr-in-Charge.
M&L for brick work with sub class B old size burnt bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed by Engr-in-Charge.
M&L Cutting holes in brick walls built in cement mortar or cement lime mortar exc half brick but not exc one brick complete all as specified and directed by Engr-in-Charge.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges or landings, steps, cills, sunshades, shelves, lintel etc. and cutting in chases for concealed conduit wiring, etc and making good, cutting not exceeding 10 cm girth complete all as specified and directed by Engr-in-Charge.
M&L for form work to side of columns and simillar work complete all as specified and directed by Engr-in-Charge.
M&L for form work to side of sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, and simillar work complete all as specified and directed by Engr-in-Charge.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed by Engr-in-Charge.
M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide complete all as specified and directed by Engr-in-Charge.
Taking down Chowkhats or frame with shutters (without taking off shutters from the frames) frames not exc. 1.5 sq. m each and removing to store complete all as specified and directed by Engr-in-Charge.
Taking down Chowkhats or frame with shutters (without taking off shutters from the frames) frames exc 1.5 sq. m but n.exc 4 sq. m and removing to store complete all as specified and directed by Engr-in-Charge.
S&F fibre glass reinforced plastic (FRP) door frame, three lagged of cross section 90 mm x 45 mm having single rebatd of 32x15 mm to receive shutter of 30 mm thickness, moulded withfire retardant grade unsaturated polyesterresin and chopped mat. Door frame laminateshall be 2mm thick and shall be filled withsuitable wooden block in all over frame. The frame shall be covered with fibre glassfrom all sides including MS stay at the bottom to steady the frame complete all as specified and directed by Engr-in-Charge.
S&F factory made solid FRP door shutter, 30 mm thick glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire retardantgrade unsaturated polyester resin mouled to 3 mm thick FRP laminated for forming hollow rails and styles iwthwooden frame and suitable blocks of seasoned wood inside at required places forfixing of fittings, cast monolithically with 5 mm thick FRP panels and confirmign to IS 14856-2000 complete all as specified and directed by Engr-in-Charge.
S&F 100mm long ISI marked medium weight cold rolled mild steel butt hinges complete all as specified and directed by Engr-in-Charge.
S&F Extruded Aluminium alloy handles, fabricated type anodised of 125mm long ISI marked complete all as specified and directed by Engr-in-Charge.
S&F Aluminium anodised barrel tower bolts of extruded section 100mm long complete all as specified and directed by Engr-in-Charge.
S&F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge.
S&F SS steel wire cloth, 0.36mm nominal dia of wire and average width or aperature 1.40mm, fixed with stainless steel wire staples complete all as specified and directed by Engr-in-Charge.
M&L for Steel vantilator with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed by Engr-in-Charge.
S&F Powder coated anodised aluminium frame as in door, window, ventilators and shutter etc. with one or more rebates including jioning cleat for fixing etc. fixed type/louvered/sliding window or ventilators without sash bar, aluminium including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed by Engr-in-Charge. Note :- (a). Glazing shall be measured & paid separately. (b). Items shall be paid as per weight of aluminium sections. (c). The rates quoted shall be inclusive of neoprene beading, glazing clips, screws, etc as required which shall not be measured for arriving the weight. (d). The rates shall be inclusive of locking arrangement including complete packing with silicon gel alround contacting surface of aluminium framework and including matching the existing surface area complete all as specified and directed by Engr-in-Charge.
S&F Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed by Engr-in-Charge.
Fixing only chain link fencing including line wires, any mesh size and type and type of standards, rails, straining bolts etc including provision of binding wire complete all as specified and directed by Engr-in-Charge.
Supply only MS galvanished chain link fencing with 3 mm dia and size 50 mm x 50 mm including line wires including strain bolts, binding wire etc complete all as specified and directed by Engr-in-Charge.
S&F mild steel screw bolts (machine made) with hexagonal head at one end and screwed the other or screwed both ends each screwed and to be fitted with washers and with hexagonal nut of exc 5 cm length with dia of shanis 11 to 15 mm etc complete all as specified and directed by Engr-in-Charge.
S&F mild steel work such as in fencing post, tie bars etc including embedding into concrete and making holes for screwing of nut, bolts, cutting top to shape as directed, drilling holes, notching for wire etc confirming Fe 410-0 or Fe 310-0 complete all as specified and directed by Engr-in-Charge.
M&L for steel work in tubuler trusses, column including special shaped washer, cleats etc complete using ERW or induction butt welded tubes confirming to IS: 1161-1979 grade st - 240 complete all as specified and directed by Engr-in-Charge.
M&L framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete all as specifed and directed by Engr-in-Charge.
M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy brackets framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats, welding etc confirming to Fe-290, (Gde E-165) complete all as specified and directed by Engr-in-Charge.
Excavating in post holes (or similar holes) each n.exc 0.50 cum getting out returning, filling in and ramming each or broken rubble mixed with earth around, in layers n.exc 25 cm watering and removing surplus soil n.exc 50 m and making good the surface in any type of soil.
M&L for TMT bars 10 mm dia and over, cut to length, bent to shape requred, including crancing bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and directed by Engr-in-Charge.
M&L for TMT bars 8 mm dia in spacers, cut to length, bent to shape requred, including crancing bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and directed by Engr-in-Charge.
M&L for TMT bars 8 to 10 mm dia a as in stirrups, spacers and binders complete all as specified and directed by Engr-in-Charge.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.
S&F 0.60 mm thick plain, galvanized mild steel sheeting in ridges hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade zinc coating 120 gm/sqm complete all as specified and directed by Engr-in-Charge.
M&L for providing 25mm thick cement concrete 1:2:4 type B1 (Using 20mm graded stone agg), as in sub base in floor/paving etc complete all as specified and directed by Engr-in-Charge.
M&L for Chequered cement concrete tiles 20cmx20cmx25mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry in floors,laid over and including 15mm thick screed bed of cement mortar (1:4) complete all as specified and directed by Engr-in-Charge.
M&L Machine pressed precast concrete interlocking paver block any colour , any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade laid over and including 50mm sand cusion and joints grouted in Cement Mortar 1:4 finished smooth complete all as specified and directed by Engr-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removing the rubbish off the premises complete all as specified and directed by Engr-in-Charge.
M&L for Vitrified Ceramic tiles (light shade), 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, as in floors/skirtings set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as specified and directed by Engr-in-Charge.
M&L for vitrified ceramic tiles 10mm thick Square/rectangular) area of each tile not exceeding 0.36 sqm as in skirting laid over and including10mm thick cement plaster in CM (1:4), set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade of tiles complete all as specified and directed by Engr-in-Charge.
M&L for Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm, as in floors laid over and including 15 mm thick cement screed bed in CM (1:6), set and jointed in neat cement slurry at the rate of 3 kg per sqm and pointed in white/coloured cement to match the shade of tiles complete all as specified and directed by Engr-in-Charge.
M&L for Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18sqm but n exc 0.38 sqm, as in skirting laid on 10 mm thick cement plaster in CM (1:4), set and jointed in neat cement slurry at the rate of 3 kg per sqm and pointed in white/coloured cement to match the shade of tiles complete all as specified and directed by Engr-in-Charge.
M&L for coloured glazed ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in cement slurry and pointed in white or coloured cement to match laid over & including 15mm thick cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including 20mm thick screed bed in CM (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr-in-Charge.
Taking down cement or cement lime plaster on brick or stone walls, etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.
M&L for 10 mm thick cement plaster on ceiling with redimix plaster (as per manufaturer's instruction) on ceiling surfaces finished even and smooth, (without using extra cement) complete all as specified and directed by Engr-in-Charge.
M&L for 15 mm thick redimix plaster (as per manufaturer's instruction) on fair faces of brick wall or concrete surfaces finished even and smooth, (without using extra cement) complete all as specified and directed by Engr-in-Charge. Notes for Srl item Nos. 65 & 66 :- 1. Make of readymix plaster shall be Birla Aerocon/Ultratech Readiplast/ACC Accoplast/Fosroc Chemical (India) Pvt Ltd Renderoc and as approved by GE. 2. The readymix plaster shall be procured directly from the manufacturer or from their authorised dealer. 3 The contractor shall produce original purchase voucher alongwith test certificate of readymix plaster while claiming RAR/ Final Bill. 4. The Engr-in-Charge shall verify the genuineness of these purchase vouchers before endorcing.
M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:4 mixed with WPC finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. Note:- WPC will be measured & paid separately.
M&L for applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer including preparation of new steel surfaces of any description , not itherwise described, over 10 cm width or girth complete all as specified and directed by Engr-in-Charge.
M&L for preperation of new plaster surfaces and applying two coats of cement base paint on wall over a coat of primer etc complete all as specified and directed by Engr-in-Charge.
M&L for Preparing new plastered or unplastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted over & including a coat of wall care Putty complete all as specified and directed by Engr-in-Charge.
M&L for 4.0 mm thick frosted sheet glass ordinary quality and glazing with oil putty in square n.exceeding 0.5 Sqm in each panes complete all as specified and directed by Engr-in-Charge.
S&F in repairs 6 mm thik glass corner shelf fancy type with railing and fitting complete of size 25cm x 25 cm of best quality (as per sample approved by Engr -in-charge)
S&F in repairs wash hand basin mixer 15mm bore CP brass fancy type including joints to steel pipe or unions complete all as specified and directed by Engr-in-Charge.
S&F in repairs Brass CP Wall mixer (Non Telephonic Type) with L bend 3-in-1 for mixing hot & cold water screwed down for iron pipe 15 mm bore and fixed complete all as specified and directed by Engr-in-Charge.
S&F in repairs Kitchen sink mixer 15mm dia CP brass fancy type including joints to steel pipe or unions complete all as specified and directed by Engr-in-Charge.
S&F in repair 15 mm dia brass chromium plated angle valve fancy type (quarter turn), screwed at ends including necessary extention piece and fixed complete all as specified and directed by Engr-in-Charge.
S&F PVC connection 15mm size, 450mm long with PTMP nuts both side complete all as specified and directed by Engr-in-Charge.
S&F in repair Vitreous china wash down water closet pan (pedestal pattern), white including sheet cover of closed pattern with flat bottom and mild steel chromium plated or aluminiumised hinging device complete all as specified and directed by Engr-in-Charge.
S&F in repair Vitreous china wash basin white, flat back, size 550 x 400mm, including necessary waste pipe and coupling, brackets and cutting for and pinning in ends of brackets, complete all as specified and directed by Engr-in-Charge.
S&F in repairs low level flushing cistern of 10 ltrs capacity PVC valveless, syphonic action type, white with inlet ball valve float and handle incl brackets complete all as specified and directed by Engr-in-Charge.
S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks three layer (cylindrical vertical with closed top) hoisted and fixed in position including dismantling water tanks of capacity exceeding 500 litres but not exceeding 1000 litres complete all as specified and directed by Engr-in-Charge.
S&F retro reflective Overhead informatory signage boards, made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lense type heat activated retro reflective sheeting conforming to type - III of ASTMD-4956-01 size of the board not less than 20 x 3 Feet and 30 Nos letters of font size not Less than 300 mm and fixing the same to the plate of structural frame work by means of suitable size aluminium alloys, rivets or bolts & nuts of approved quality complete all as specified and directed by Engr-in-Charge. Note :- Design/pattern shall be approved by GE.
Supply only Liquid water proofing compound of approved quality.
M&L for preparation of new undecorated plastered surfaces of wall and applying three coats of white wash complete all as specified and directed by Engr-in-Charge.
All as per Srl item No.86 above, but on ceiling.
M&L flushing pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern complete all as specified and directed by Engr-in-Charge.
S&F Vitreous China urinals, half stall type, including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed by Engr-in-Charge.
S&F 15 mm bore CP Urinal spreader for urinals complete all as specified and directed by Engr-in-Charge.
Roughening surfaces of old concret floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and as directed.
S&F rotational moulded polyethylene water storage tank three layer of 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr-in-Charge.
S&F ball brass valve high pressure with polythene float and fly nut screwed for iron pipe of size 20mm dia complete all as specified and directed by Engr-in-Charge.
S&F bib taps fancy type chromium plated, with crunch or butterfly handle screwed down,screwed for iron pipe or for brass ferrule and fixed of 15mm bore size complete all as specified and directed by Engr-in-Charge.
S&F pillar cock fancy typre cast copper alloy, chromium plated 15mm dia of bore complete all as specified and directed by Engr-in-Charge.
S&F stop cock fancy type chromium plated, screwed down, high presure with cruntch or butterfly handle screwed both ends for iron pipe of 15mm bore pipe complete all as specified and directed by Engr-in-Charge.
M&L 15mm GI tubing 'Medium grade' with all fiting and fixed complete tom wall and celing or laid in floor of fllowing sizes complete all as specified and directed by Engr-in-Charge.
All as per Srl item No.97 above but 20mm bore complete all as specified and directed by Engr-in-Charge.
S&F 100mm dia cast iron soil, waste and vent sand cast pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed by Engr-in-Charge.
M&L for providing concrete bed to drain pipe including packing under and hauching against the sudes of pipes after they are laid and tested, in cement concrete 1:3:6 type C1 (Using 20mm graded stone aggregate) complete all as specified and directed by Engr-in-Charge.
S&F 100 mm bore cast iron pipe (sand cast) as in soil, waste and vent pipe, in any length with or without ears, with cement joints fixed to walls complete all as specified and directed by Engr-in-Charge.
M&LSalt-glazed stoneware gully traps, square or roun mouthed floor trap, plain with grating including jointing with solvent cement of 100mm dia complete all as specified and directed by Engr-in-Charge.
S&F CP grating of size 100mm dia complete all as specified and directed by Engr-in-Charge.
M&L for non skid ceramic tiles, coloured tiles, 7 to 8 mm thick (square/rectangular) polished, area of each tiles exceeding 0.18 sqm not exceeding 0.38 Sqm, in floors etc. laid over 15mm thick cement mortar screed bd of CM (1:6), set and jointed in neat cement slurry @ 3.00 Kg per Sqm and pointed in white or coloured cement to match the shade of tile complete all as specified and as directed.
S&F in repairs brass chromium plated shower rose of size 125 mm with arm including fixing to steel pipe.
M&L for point wiring complete, stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable suitable concealed PVC/MS conduit and including replacment of unsv pressed steel terminal boxes of required size and factory painted with stove enameled black paint with top cover 3mm thick plastic/laminated sheet of required colour with screwed and cup washer with all accessories including 1.5 Sqmm stranded copper conductor PVC unsheathed cable earth wire to common earth and connected to earth dolly complete all as specified for One light/Fan/Bell point/Security Light controlled by one switch 5 Amps one way using cable (1.5 Sqmm for phase and neutral and 1.5 Sqmm for earthing) complete all as specified and directed by Engr-in-Charge. Note:- The rate is inclusive cutting/chasing and making good distrubed surface with CM 1:3 adn same surface finishes with the adjoining surface of distribed area with ODB/colour wash/white wash completed.
All as per Srl item No.106 above, but One 3 pin socket outlet 5 Amps same board with cables 1.5 sqmm size for phase and neutral and 1.5 Sqmm for earthing complete all as specified and directed by Engr-in-Charge.
All as per Srl item No.106 above, but One 3 pin socket outlet 5 Amps point independent board with cables 1.5 sqmm size for phase and neutral and 1.5 Sqmm for earthing complete all as specified and directed by Engr-in-Charge.
All as per Srl item No.106 above, but for one socket outlet 5/15 Amps on Independent board with cables 2.5 Sqmm size for phase and neutral and 2.5 Sqmm for earthing complete all as specified and directed by Engr-in-Charge.
S&F switch piano flush type 5/6 Amp one way single pole complete all as specified and directed by Engr-in-Charge.
S&F socket outlet 5 pin 5/6 Amp two in one complete all as specified and directed by Engr-in-Charge.
S&F switch piano flush type 15 Amp complete all as specified and directed by Engr-in-Charge.
S&F socket outlet 2 in 1, 5 pin 15/5 Amp complete all as specified and directed by Engr-in-Charge.
S&F ceiling rose surface Bakelite 65x25mm two to three terminals complete all as specified and directed by Engr-in-Charge.
S&F fan regulator electronic, Socket type suitable for ceiling fan 1200/1400 mm sweep complete all as specified and directed by Engr-in-Charge.
S&F wall mounted LED integrated batten T-5 20 Watt - 4ft white 6500K, indoor decorative PVC extruded T-5 LED batten - integrated type as per sample complete all as specified and directed by Engr-in-Charge.
S&F BLDC (Brush Less Direct Current) ceiling fan of 1200mm sweep, not less than 350 RPM and Air Delivery 215 CFM, Voltage 220V, high air flow with silence operation, having full copper motor & ribbed 3 Nos A/M blades. The BLDC motor fan shall have 100% rust-free blade. the fan shall have BEE 5 star rating and compliant with IS-374 and making necessary electric connection of suitable PVC copper wire from ceiling rose to ceiling fan complete all as specified and directed by Engr-in-Charge.
S&F LED street light fitting 40 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, including fabrication of GI bracket 25mm dia suitable for fixing of Led light fitting duly fixed with clamps, nut, bolts, & washers etc and complete all as specified and directed by Engr-in-Charge.
S&F MCB DB SPN 6 Way with metal double door, (IP43 Protection) flush mounting epoxy powder coated having 200 Amps rated bus bar complete all as specified and directed by Engr-in-Charge.
S&F for MCB SPN 'C' curve 40 to 63 Amps 240 Volts, 10 KA complete all as specified and directed by Engr-in-Charge.
S&F for MCB SP 'C' curve 06 to 32 Amps 240 Volts complete all as specified and directed by Engr-in-Charge.
M&L for Earthing complete with galvanized steel earth plate 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate n.less than 1.5 m below normal ground level, connected to galvanized iron wire 4 mm as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints as shown in drgs and including excavation and earth work, GI pipe light grade 25mm bore of protection of GI wire from earth electrode, supply and laying charcoal dust, common salt, PCC (1:2:4) type B-1 Chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type B-1using 20 mm graded stone aggregate Reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia , PGI funnel and wire mesh, 20 mm dia GI Pipe light grade for watering complete all as shown in drg and connected to earth test point including testing complete all as specified and directed by Engr-in-Charge.
Note:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.
verma enterprises
M/S.M.S.Devi.Const.Co
M/S GOPAL JEE SINGH
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .