Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹12.7 L
EMD Value
₹31,653
Closing Date
12 Jan 2024, 11:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Rural Development and Panchayat Raj Department
EE PRED BAGALKOTE
Construction of Anganwadi Building for Marapura Muddy Area-1008 of Marapura village of Rabakavi-Banahatti Taluk Bagalkote District
RDPR/2023-24/BD/WORK_INDENT1308
RDPR/2023-24/BD/WORK_INDENT1308
Open
Buildings
Two Tender Document System(Two Cover)
RDPR Division Office Bagalakote
6 documents required · 6 mandatory
List of existing commitments and ongoing work
List of works for which tenders already submitted
Tenderer must have valid Class-2 Above contractor Civil registered in KPWD must submit the registration copy
Tenderer must have of value2018-19 TO 2022-23 satisfactorily completed, as a prime contractor at least one Similar nature of work of 50 Percent of not less than Rs.6.33 lakhs issued by the officer not below the rank of Executive Engineer For Builging works work done certificate with works shoud be produced. 50% of the amount put tender (Workdone with indent No)
Bid Capacity
To qualify for award of this contact each tenderer in his name should have in the last five years period achieved in at least two financial years an average financial turnover of Rs 12.66 Lakhs usually not less than amount put to tender fromfrom C.A. on Letter Head with UDIN No. otherwise bid will be directly disqualified
₹500
₹31,653
27 Dec 2023
27 Dec 2023
16 Jan 2024
11 Jan 2024
Construction of Anganwadi Building for Marapura Muddy Area-1008 of Marapura village of Rabakavi-Banahatti Taluk Bagalkote District
Earth work excavation for Foundation by mechanical means for all works depth upto 3 m as per drawing and technical specifications including setting out shoring strutting barricading caution lights inc...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The ranite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing Thermo-Mechanically Treated bars of grade Fe-500D or
more Steel reinforcement for R.C.C. work including straightening,
cutting, bending, placing in position, binding and anchoring to adjacen...
Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...
Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Providing and fixing in position fully panelled Honne wood shutters for
doors with stiles and rails of 40mm. thick with bottom and lock rails
180mm wide top rail and stiles 100mm wide as per drawing a...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing and fixing of 2 track x 2 panel sliding windows made out of multi chambered UPVC (Matching to RAL9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...
Providing and fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top and bottom rails, covered with hea...
Providing and fixing 18 mm thick gang saw cut granite of any colorand shade, mirror polished, premoulded and prepolished, machine cutfor kitchen platforms, vanity counters, window sills, facias and si...
Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...
2.5 Cms thick Shahabad slabs as per specifications and as per directions of Engineer-in-charge. with all lead, lift, loading unloading, labour, fuel higher charges of machineries, equments including a...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr 10 m² of approved brand and manufacture to give...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank IS 1207 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overf...
Providing and fixing Chlorinated polyvinly Chloride (CPVC) pipes having thermal sibility for hot and cold water supply including all CPVC plain and brass threaded fittings this including jointing of p...
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wa...
15 mm CP brass tap as per specifications and as per directions of Engineer-in-charge. with all lead, lift, loading unloading, labour, fuel higher charges of machineries, equments including all inciden...
Providing and fixing Chlorinated polyvinly Chloride (CPVC) pipes having thermal sibility for hot and cold water supply including all CPVC plain and brass threaded fittings this including jointing of p...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Providing and laying heavy duty cobble stones 60mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength...
Providing and laying water proofing treatment to the Roof with PU based
single component elastomeric pure polyurethane based coating on
New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...
Electrical Construction of Anganwadi Building for Marapura Muddy Area-1008 of Marapura village of Rabakavi-Banahatti Taluk Bagalkote District
ELECTRIFICATION Supplying heavy gauge PVC conduit pipe mm dia .mm thick confirming to IS 2509 with suitable size bends, metal PVC junction boxes, adhesive paste etc., and running before concreting t...
Supplying heavy gauge PVC Conduit Pipe dia mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement...
Supplying and flush mounting teak wooden box without front plank made of not less than 12mm thick wood after due groove cutting finishing with necessary cement plaster complete 10x7x3 254x178x76mm
Supplying and wiring adopting loop system in existing PVC Conduit casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming t...
Supplying and wiring adopting loop system in existing PVC Conduit casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming t...
Supplying and wiring adopting loop system in existing PVC Conduit casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming t...
Wiring for lighting power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...
Wiring for lighting power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...
Wiring for lighting power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...
Supplying 6A flush type socket and 6 amps flush type SP switch either surfaceflush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring us...
Supplying and fixing of modular switch connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch
Supplying and fixing of modular switch connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6 16Amps universal socket
Supplying and fixing of modular switch connected accessories on existing modular switch plate as per IS3854 and IS 1293. Stepped Fan Regulator
Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws.
Supply of roundsquare recesssurface mounted rolling type LED Down light with .W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveli...
Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. 8x6x1....
Supplying and fixing of porcelain fuse channel with cut on existing wooden panel using necessary nuts bolts and wahers etc
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
Supplying and fixing regular MCB distribution boards on wall wood board flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase 3 p...
Supplying, fixing wiring earth electrode for grounding conduits IC cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit The pit should be ...
Supplying heavy gauge PVC conduit pipedia mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and...
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-3741979 and with double ball b...
Supplying and Fixing of mm dia class A GI pipe bracket up to 2 Mtrs long bent at suitable angle and fixing to this bracket 1x40 2x40 watts fluorescent tube street light fitting of all capacities to GI...
Fixing all types and all capacities of fluorescent false ceiling spot light CFL LED fittings indoor on the wall ceiling rafters girders using 23/0.0076 twin twisted PVC insulated wires, required N...
Fixing a ceiling wall mounting fan of all capacities and all types with necessary clamps and S hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of ...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KPPP-kw-1-.docx
Tender Document • 1.84 MB
General conditions.xlsx
Tender Document • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .