Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.5 LAccepted-AOC 110 245 NEHRU NAGAR KANPUR UTTAR PRADESH 208012 | KANPUR NAGAR | UTTAR PRADESH | 208012 | L1 | Accepted-AOC L1 | |
| 2 | L2₹19.6 L+₹2.2 L (12.7%)Rejected-Finance JAJJAR KOTLI JAMMU J K 151222 | JAMMU | JAMMU | J K | 151222 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹24.6 L+₹7.2 L (41.4%)Rejected-Finance NEAR INDUSTRIAL ESTATE THANDA PADDAR UDHAMPUR J K 182101 | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹29.7 L+₹12.3 L (70.5%)Rejected-Finance SHOP NO 82 6 TRANSPORT NAGAR NARWAL JAMMU 180004 | JAMMU | JAMMU | J K | 180004 | L4 | Rejected-Finance Other than L1 |
Tender Value
Refer Docs
EMD Value
₹60,000
Closing Date
17 Mar 2021, 6:00 pmClosed
GE UTILITIES
GE UTILITIES UDHAMPUR PO- GARHI PIN-182121
Repair /Replacement of centrifugal pump sets, electric motors, pipe lines, sluice valves, NRV, ARV and allied works in Jib area under GE Utilities Udhampur
2021_MES_423030_1
GE/U-80/2020-21
Open Tender
Pumps/Motors
Item Rate
270 days
GE Utilities Udhampur
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE UTILITIES UDHAMPUR
₹60,000
Yes
7 Apr 2021
17 Feb 2021
19 Mar 2021
17 Feb 2021
17 Mar 2021
3 Mar 2021
Amount
Decoupling, disconnecting suction line and discharge line taking down from foundation bolts, dismounting from base channels strip opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of pump sets. Reassembling of pump set mounting and fixing on base channel, recoupling of suction & discharge line realignment commissioning and testing in respect of centrifugal/multistage pump of capacity 75 HP complete all as specified and directed by Engr-in-Charge. Note: - (i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of parts shall be measured and paid separately under respective item of sch A.
Description all as per serial item No 1.00 here-in-before but capacity 30/40/50HP.
Description all as per serial item No 1.00 here-in-before but capacity 25/20/15HP.
Description all as per serial item No 1.00 here-in-before but capacity 7.5/5HP/3HP.
S&F in replacement Pump impeller made out of Bronze for single/double/multistage pumps of capacity 75HP as per manufacturer's composition of existing make of pump complete all as specified and directed by Engr-in-Charge. Make: Kirloskar/Crompton/willo
Description all as per serial item No 5.00 here-in-before but Pump shaft stainless steel shaft complete with check nut and keys.
Description all as per serial item No 5.00 here-in-before but Tyre coupling/star coupling.
Description all as per serial item No 5.00 here-in-before but Gland cup with nuts and bolts.
Description all as per serial item No 5.00 here-in-before but Shaft sleeves.
Description all as per serial item No 5.00 here-in-before but Bearing housing.
Description all as per serial item No 5.00 here-in-before but Casing bearing.
S&F in replacement Pump impeller made out of Bronze for single/double/multistage pump of capacity 50HP as per manufacturer's composition of existing make of pump complete all as specified and directed by Engr-in-Charge. Make: Kirloskar/Crompton/Willo
Description all as per serial item No 12.00 here-in-before but Pump shaft stainless steel shaft complete with check nut and keys.
Description all as per serial item No 12.00 here-in-before but Shaft sleeves.
Description all as per serial item No 12.00 here-in-before but Casing bearing.
Description all as per serial item No 12.00 here-in-before but Bearing housing.
Description all as per serial item No 12.00 here-in-before but Tyre coupling/star coupling.
Description all as per serial item No 12.00 here-in-before but Gland cup with nut and bolts.
S&F in replacement Pump impeller made out of Bronze for single/double/multistage stage pump of capacity 30/40HP as per manufacturer's composition of existing make of pump complete all as specified and directed by Engr-in-Charge. Make: Kirloskar/Crompton/Willo
Description all as per serial item No 19.00 here-in-before but Pump shaft stainless steel shaft complete with check nut and keys.
Description all as per serial item No 19.00 here-in-before but Shaft sleeves.
Description all as per serial item No 19.00 here-in-before but Casing bearing.
Description all as per serial item No 19.00 here-in-before but Bearing housing.
Description all as per serial item No 19.00 here-in-before but Tyre coupling/star coupling.
Description all as per serial item No 19.00 here-in-before but Gland cup with nut and bolts.
S&F in replacement Pump impeller made out of Bronze for single/double stage pump of capacity 25/20/15HP as per manufacturer's composition of existing make of pump complete all as specified and directed by Engr-in-Charge. Make: Kirloskar/Crompton/Willo
Description all as per serial item No 26.00 here-in-before but Pump shaft stainless steel shaft complete with check nut and keys.
Description all as per serial item No 26.00 here-in-before but Shaft sleeves.
Description all as per serial item No 26.00 here-in-before but Casing bearing.
Description all as per serial item No 26.00 here-in-before but Bearing housing.
Description all as per serial item No 26.00 here-in-before but Tyre coupling/star coupling.
Description all as per serial item No 26.00 here-in-before but Gland cup with nut and bolts.
S&F in replacement Pump impeller made out of Bronze for single/double stage pump of capacity 7.5/5HP/3HP as per manufacturer's composition of existing make of pump complete all as specified and directed by Engr-in-Charge. Make: Kirloskar/Crompton/Willo
Description all as per serial item No 33.00 here-in-before but Pump shaft stainless steel shaft complete with check nut and keys.
Description all as per serial item No 33.00 here-in-before but Shaft sleeves.
Description all as per serial item No 33.00 here-in-before but Casing bearing.
Description all as per serial item No 33.00 here-in-before but Bearing housing.
Description all as per serial item No 33.00 here-in-before but Tyre coupling/star coupling.
Description all as per serial item No 33.00 here-in-before but Gland cup with nut and bolts.
Disconnecting electric connection of 75HP motor, removing the UNSV motor from existing place by unscrewing the foundation bolts and nuts decoupling from the pump, setting aside and transporting to workshop for repairs including dismantling the motor,cutting/taking out burnt winding of stator, rotor, cleaning the slots, transporting back after repair/winding & re-assembling the same. Cost of loading, unloading & transportation shall be deemed included in the quoted rates complete all as specified and directed by Engr-in-Charge. Note: - Winding of motor stator & rotor shall be measured & paid separately.
(a) Rewinding of motor will be measured and paid separately under relevent item (b) The motor shall be Suirrel cage induction motor. (c) The rates quoted shall be deemed to include the cost of loading/unloading, transportation, grease, nuts, bolts and washers of any size and shape as required at site and refixing of serviceable motor duly functional and testing complete at its existing location/position complete all as specified and directed. (d) Replacement of u/s bearings and grease completely. (e) The contractor shall be arranged a workshop visit of Engr-in-Charge for each job and cutting complete burnt winding of motor in presence of Engr-in-Charge.
Description all as per serial item No 40.00 here-in-before but capacity 30/40/50HP motor.
Description all as per serial item No 40.00 here-in-before but capacity of 25/20/15HP motor.
Description all as per serial item No 40.00 here-in-before but capacity of of 7.5/5HP/3HP motor.
Removing the burnt out winding from the rotor and stator, cleaning the slots, providing high quality of class'B' paper insulation inside the slots, rewinding the motor of capacity 75/50/40/30/25/20/15/ 7.5/5HP/3HP with super enamel copper wire of same size and guage as per existing rapping up with high quality cotton tape and varnising with super quality oil including drying upto desired temperature and desired time complete all as specified and directed by Engr-in-Charge. Note: - Cost of labour for winding deemed to be included in the rate quoted. Make: Atlas/Devidyal
S&F in repair of Pump bearing No. 6307 C3 Make: SKF/NBC or equivalent make
S&F in repair of (Air compressor)Motor bearing No. 6306 C3 Make: SKF/NBC or equivalent make
S&F in repair of Pump bearing No. 6308 2RS1/C3 Make: SKF/NBC or equivalent make
S&F in repair of Pump bearing No. 6309 M/C3 Make: SKF/NBC or equivalent make
S&F in repair of Motor bearing No. 6310 M/C3 Make: SKF/NBC or equivalent make
S&F in repair of Motor bearing No. 6311 C3 Make: SKF/NBC or equivalent make
S&F in repair of Motor bearing No. 6312 C3 Make: SKF/NBC or equivalent make
S&F in repair of Motor bearing No. 6011 C3 Make: SKF/NBC or equivalent make
S&F in repair of Pump bearing No. 6408 C3 Make: SKF/NBC or equivalent make
S&F in repair of Pump bearing No. 22312 E Make: SKF/NBC or equivalent make
S&F in repair of Pump bearing No. 3307 ATN9 Make: SKF/NBC or equivalent make
S&F in repair of Pump bearing No. 7310 BECBJ Make: SKF/NBC or equivalent make
S&F in repair of Motor bearing No. 7311 BECBJ Make: SKF/NBC or equivalent make
S&F in repair of Motor bearing No. NU 304 ECP Make: SKF/NBC or equivalent make
M&L in replacement of PVC insulated heavy duty industrial cables single core copper conductor(flexible) PVC insulated cable 1100 volt nominal area of conductor 95 sqmm inculding taking down existing old unserviceable cable complete all as specified and directed by Engr-in-Charge. Make: Havells/Polycab/Gloster
S&F in replacement of ON load change over switch 320 Amps, 415 volts 4 pole with stainless steel enclosure inculding taking down the old existing change over switch complete all as specified and directed by Engr-in-Charge. Make: Havells Cat part No.IHCNFE0320 or equivalent make approved by GE.
S&F in replacement of ON load change over switch 250 Amps, 415 volts 4 pole with stainless steel enclosure inculding taking down the old existing change over switch complete all as directed by Engineer -in-Charge. Make: Havells Cat part No.IHCNFE0250 or equivalent make approved by GE
S&F in replacement of OFF load change over switch 200 Amps, 415 volts 4 pole side handle operated with stainless steel enclosure inculding taking down the old existing change over switch complete all as specified and directed by Engr-in-Charge. Make: Havells Cat part No.IHCFFE0200 or equivalent make approved by GE.
S&F in replacement of OFF load change over switch 400 Amps, 415 volts 4 pole side handle operated with stainless steel enclosure inculding taking down the old existing change over switch complete all as specified and directed by Engr-in-Charge. Make: Havells Cat part No.IHCFFE0400 or equivalent make approved by GE.
S&F in replacement of OFF load change over switch 800 Amps, 415 volts 4 pole side handle operated with stainless steel enclosure inculding taking down the old existing change over switch complete all as specified and directed by Engr-in-Charge. Make: Havells Cat part No.IHCFFE0800 or equivalent make approved by GE.
S&F in replacement of load line MCCB 630 Amps 4 pole 415 volts with adjustable thermal and fixed magnetic setting of breaking capacity 35/36KA, Ics=100% Icu including taking down the old existing MCCB complete all as specified and directed by Engr-in-Charge. Make: Havells Cat part No. IHLLSEBF0630 or equivalent make approved by GE.
S&F in replacement of load line MCCB 400 Amps 4 pole 415 volts with adjustable thermal and fixed magnetic setting of breaking capacity 35/36KA, Ics=100% Icu including taking down the old existing MCCB complete all as directed by Engr in charge. Make: Havells Cat part No. IHLLSEBF0400 or equivalent make approved by GE.
S&F in replacement of load line MCCB 250 Amps 4 pole 415 volts with adjustable thermal and fixed magnetic setting of breaking capacity 35/36 KA,Ics=100% Icu including taking down the old existing MCCB complete all as directed by Engr in charge. Make: Havells Cat part No. IHLLSEBF0250 or equivalent make approved by GE.
S&F in relpacement of load line MCCB 200 Amps 4 pole 415 volts with adjustable thermal and fixed magnetic setting of breaking capacity 35/36KA, Ics=100% Icu including taking down the old existing MCCB complete all as specified and directed by Engr-in-Charge. Make: Havells Cat part No. IHLLSEBF0200 or equivalent make approved by GE.
S&F in replacement of load line MCCB 160 Amps 4 pole 415 volts with fixed thermal and fixed magnetic setting of breaking capacity 35/36KA, Ics=100% Icu including taking down the old existing MCCB complete all as specified and directed by Engr-in-Charge. Make: Havells Cat part No. IHLFNF0160 or equivalent make approved by GE.
S&F in repair of copper thimble suitable for 95 Sqmm single core copper cable including taking down the existing unserviceable one complete all as specified and directed by Engr-in-Charge. Make: Dowells/Indiana
S&F in replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 150sqmm 3.5 core laid in trenches,ducts, pipes complete all as specified and directed by Engr-in-Charge. Make: Havells/Polycab/Gloster
S&F in repair of aluminium thimble of 150sqmm size for cables complete all as specified and directed by Engr-in-Charge. Make: Dowells/Indiana
Dismantling of air compressor and motor (15 HP) from existing position i.e foundation, pipe line, cable etc taking out the same and transportation to the work shop for repair & following works complete all as specified and directed by Engr-in-Charge. Note: - (a) Dismantling the compressor unit, segrigation of serviceable and unserviceable part, repair/overhauling of compressor, replacement of unserviceable parts all as required at site for smooth functioning of the compressor including necessary machine work, greasing and ressembling the same complete in all respect. (b) M&L for applying two coats of spray painting with 1st grade of synthetic enameled paint of approved brand and colour to the compressor & motor after preparation of steel surface. Note: Spare parts required for repair shall be measured and paid under relevant items.
S&F in replacement of Fully automatic star delta motor starter in sheet steel enclosure type MN 65 with single phase protection feature motor rating AC 3 phase 415 volts, 50 Hz for motor of capacity 75 HP as per cat part No IHPASDYF* including taking down the old existing starter, complete all as directed by engr-in-Charge. Make: Havells/L&T/IndoAsian
S&F in replacement of Fully automatic star delta motor starter in sheet steel enclosure type MN 50 with single phase protection feature motor rating AC 3 phase 415 volts, 50 Hz for motor of capacity 50 HP as per cat part No IHPASDWE* including taking down the old existing starter complete all as specified and directed by Engr-in-Charge. Make: Havells/L&T/IndoAsian
S&F in replacement of Fully automatic star delta motor starter in sheet steel enclosure type MN 32 with single phase protection feature motor rating AC 3 phase 415 volts, 50 Hz for motor of capacity 30 HP as per cat part No IHPASDQD* including taking down the old existing starter complete all as specified and directed by Engr-in-Charge. Make: Havells/L&T/IndoAsian
S&F in replacement of power contactor 3 pole with AC coil AC-3 duty rating at 415 Volts 50 Hz, frame size1including taking down the old existing power contactor suitable for 75 HP centrifugal pump set complete all as specified and directed by Engr-in-Charge. Make: Havells/L&T/IndoAsian
S&F in replacement of MS stud bolts of existing size with nuts suitable for pumps and motors of various capacity installed at installations complete all as specified and directed by Engr-in-Charge.
S&F in replacement of grouting nuts and bolts of existing size suitable for pumps and motors foundation of various capacity installed at installations complete all as specified and directed by Engr-in-Charge.
Demolition of concrete any description and in any position not otherwise sepcifically provided for foundation of pump and motor complete all as specified and directed by Engr-in-Charge.
M&L for cement concrete type B-2, 1:2:4 (40mm graded aggregate) as in sub base filling and mass concrete complete all as specified and directed by Engr-in-Charge.
M&L for cement concrete in foundations, type E-2, 1:5:10 (40mm graded aggregate) as in filling and mass concrete complete all as specified and directed by Engr-in-Charge.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of cables, pipes foundations of poles/stays/pipes etc .not exc 10 Sqm area on plan and getting out in soft/loose soil complete all as specified and directed by Engr-in-charge.
Returning, filling in excavated soil in trenches including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed by Engr-in-charge.
Removing of excavated soil to a distance n. exc. 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engr-in-charge.
Taking up or down GI pipe of size 150 mm dia including all fittings complete all as specified and directed by Engr-in-charge.
Description all as per serial item No 86.00 here-in-before but bore of pipe 100mm dia.
Description all as per serial item No 86.00 here-in-before but bore of pipe 80mm dia.
Description all as per serial item No 86.00 here-in-before but bore of pipe 50mm dia.
Description all as per serial item No 86.00 here-in-before but bore of pipe 40mm dia.
Description all as per serial item No 86.00 here-in-before but bore of pipe 25mm dia.
Description all as per serial item No 86.00 here-in-before but bore of pipe 20mm dia.
Description all as per serial item No 86.00 here-in-before but bore of pipe 15mm dia.
S&F only GI pipes of any sizes medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete all as specified and directed by Engr-in-charge. Make: Prakash Surya/Jindal/Tata
Description all as per serial item No 94.00 here-in-before but bore of pipe 150mm dia.
Description all as per serial item No 94.00 here-in-before but bore of pipe 100mm dia.
Description all as per serial item No 94.00 here-in-before but bore of pipe 80mm dia.
Description all as per serial item No 94.00 here-in-before but bore of pipe 50mm dia.
Description all as per serial item No 94.00 here-in-before but bore of pipe 40mm dia.
Description all as per serial item No 94.00 here-in-before but bore of pipe 25mm dia.
Description all as per serial item No 94.00 here-in-before but bore of pipe 20mm dia.
Description all as per serial item No 94.00 here-in-before but bore of pipe 15mm dia.
S&F in replacement of cast iron fittings for spigot and socket ends for pressure pipe for water mains such as bends, tapers tee pieces single branch, cross collar, caps and plugs suitable for 200 to 300 mm bore, all specifications as per IS-1538 (Pt-1 to 23)-1976 complete all as specified and directed by Engr-in-charge.
Description all as per serial item No 103.00 here-in-before but upto 150mm bore.
Repair to old sluice valve of size 200 mm dia for check nut, refacing, regrinding & refixing at its original location including cleaning, repacking stuffing box of sluice valve & spindle including fixing & testing complete all as specified and directed by Engr-in-charge.
Description all as per serial item No 105.00 here-in-before but 150mm dia.
Description all as per serial item No 105.00 here-in-before but 100mm dia.
S&F in replacement Cast Iron sluice valve of size 250 mm dia(PN 1.6) ISI Marked with iron wheel head both end flanged, CI /steel spindle, non rising type complete with Neoprene rubber gasket, nuts, bolts and washers etc, including taking down existing sluice valve complete all as specified and directed by Engr-in-charge.
Description all as per serial item No 108.00 here-in-before but 200mm dia.
Description all as per serial item No 108.00 here-in-before but 150mm dia.
Description all as per serial item No 108.00 here-in-before but 100mm dia.
Description all as per serial item No 108.00 here-in-before but 80mm dia.
S&F in replacement of Cast Iron Non return valve suitable for 150 mm bore pipe heavy duty both end flanged of pressure rating PN 1.6 and jointing with the rubber or fibre board gasket complete including taking down existing valve with and including required nos size of nuts, bolts and washers complete all as specified and directed by Engr-in-charge.
S&F in replacement of Cast Iron Non return valve suitable for 100 mm bore pipe heavy duty both end flanged of pressure rating PN 1.6 and jointing with the rubber or fibre board gasket complete including taking down existing valve with and including required nos size of nuts, bolts and washers complete all as specified and directed by Engr-in-charge.
S&F in replacement of Gun-metal, globe or gate valves, 50mm dia, heavy duty, with iron wheel head, screwed both ends (ISI marked) complete all as specified and directed by Engr-in-charge.
S&F in replacement of of Gun-metal, globe or gate valves, 40mm dia, heavy duty, with iron wheel head, screwed both ends (ISI marked) complete all as specified and directed by Engr-in-charge.
S&F in replacement of of Gun-metal, globe or gate valves, 25mm dia, heavy duty, with iron wheel head, screwed both ends (ISI marked) complete all as specified and directed by Engr-in-charge.
S&F in replacement of Gun-metal, globe or gate valves, 20mm dia, heavy duty, with iron wheel head, screwed both ends (ISI marked) complete all as specified and directed by Engr-in-charge.
S&F in replacement of Gun-metal, globe or gate valves, 15mm dia , heavy duty, with iron wheel head, screwed both ends (ISI marked) complete all as specified and directed by Engr-in-charge.
M&L for repair to leaking run lead joints in CI/DI spigot and socket end pipe line of 80 mm bore by providing new lead ,using good quality spun yarn, including necessary excavation, returning filling in trenches in any type of soil,bailing out water, and any depth complete all as specified and directed by Engr-in-charge.
Description all as per serial item No 120.00 here-in-before but of dia 100 mm bore pipe.
Description all as per serial item No 120.00 here-in-before but of dia 150 mm bore pipe.
Description all as per serial item No 120.00 here-in-before but of dia 200 mm bore pipe.
Description all as per serial item No 120.00 here-in-before but of dia 250 mm bore pipe.
Description all as per serial item No 120.00 here-in-before but of dia 300 mm bore pipe.
M&L in replacement of cast iron air release valve with two air outlets of size 100mm dia including all jointing materials like high pressure rubber gasket nuts, bolts, washers suitable for 300mm/250mm dia pipe with arrangement for fixing, including taking down complete all as specified and directed by Engr-in-charge.
Description all as per serial item No 126.00 here-in-before but of 80mm dia.
M&L for cutting of existing road for crossing of MS/DI/CI/GI pipes for laying of any size pipes including necessary excavation and earth work including repairing the same as per existing with pre mix bituminuos carpet complete all as specified and directed by Engr-in-charge.
M&L for run lead joints for CI/DI of spigot socketed ends pipes of size 80mm bore in position providing new lead ,using good quality spun yarn complete all as specified and directed by Engr-in-Charge. at any depth complete all as specified and directed by Engr-in-charge.
M&L for run lead joints for CI/DI of spigot socketed ends pipes of size 100mm bore in position providing new lead ,using good quality spun yarn complete all as specified and directed by Engr-in-Charge. at any depth complete all as specified and directed by Engr-in-charge.
M&L for run lead joints for CI/DI of spigot socketed ends pipes of size 150 mm bore in position providing new lead ,using good quality spun yarn complete all as specified and directed by Engr-in-Charge. at any depth complete all as specified and directed by Engr-in-charge.
M&L for run lead joints for CI/DI of spigot socketed ends pipes of size 200mm bore in position providing new lead ,using good quality spun yarn complete all as specified and directed by Engr-in-Charge. at any depth complete all as specified and directed by Engr-in-charge.
M&L for run lead joints for CI/DI of spigot socketed ends pipes of size 250mm bore in position providing new lead ,using good quality spun yarn complete all as specified and directed by Engr-in-Charge. at any depth, complete all as specififed and directed by Engineer-in-charge
M&L for run lead joints for CI/DI of spigot socketed ends pipes of size 300mm bore in position providing new lead ,using good quality spun yarn complete all as specified and directed by Engr-in-Charge. at any depth complete all as specified and directed by Engr-in-charge.
S&F in repairs of GI fittings heavy duty ISI marked including neccessary screwing, cutting etc complete all as specified and directed by Engr-in-charge.
Elbow 15mm
Elbow 20mm
Elbow 25mm
Elbow 40mm
Elbow 50mm
Socket 15mm
Socket 20mm
Socket 25mm
Socket 40mm
Socket 50mm
Union 15mm
Union 20mm
Union 25mm
Union 40mm
Union 50mm
Elbow reducer 20 x 15mm
Elbow reducer 25 x 20mm
Elbow reducer 40 x 25mm
Nipple 15 x50mm
Nipple 15 x100mm
Socket reducer 25x20mm
Nipple 20 x50mm
Nipple 20 x100mm
Socket reducer 40x25mm
Nipple 25 x 50mm
Nipple 25 x 100mm
Socket reducer 40x20mm
Nipple 40 x 50mm
Nipple 40 x 100mm
Nipple 50 x 50mm
Nipple 50 x 100mm
Lead wool
Tee 15mm
Tee 20mm
Tee 25mm
Tee 20x15mm
Tee 25x20mm
Tee 40x15mm
Tee 40x20mm
Tee 40x25mm
Dead plug 15mm
Dead plug 20mm
Dead plug 25mm
S&F in replacement of chequered plates of square cut having 5mm thick of Fe-410W GradeE-250 quality' B', ordinary or counter sunk, forming holes with both ends hook arrengements including taking down old plates complete all as specified and directed by Engr-in-charge.
Supply, laying, jointing & testing in repair of PVC PP-R pipe having outer dia 25mm of pressure rating 10 Kg/cm² in three layer with all fittings laid in trenches including taking down complete all as specified and directed by Engr-in-charge.
Supply, laying, jointing & testing in repair of PVC PP-R pipe having outer dia 50mm of pressure rating 10 Kg/cm² in three layer with all fittings laid in trenches including taking down complete all as specified and directed by Engr-in-charge.
Supply, laying, jointing & testing in repair of PVC PP-R pipe having outer dia 75mm of pressure rating 10Kg/cm² in three layer with all fittings laid in trenches including taking down complete all as specified and directed by Engr-in-charge.
Supply, laying, jointing & testing in repair of PVC PP-R pipe having outer dia 90mm of pressure rating 10Kg/cm² in three layer with all fittings laid in trenches including taking down complete all as specified and directed by Engr-in-charge.
S&F in replacement of pop-up sprinklers having radius of throw 20 meters and flow minimum 1.2 LPS at an operative pressure 4-6Kg/Sqcm the sprinkler shall be impact driven rotary with provision for adjusting at any degree of rotating having 01 inlet 20mm pop up stoke, self flushing with pop-up shield made of virgin grade engineering, plastic body, sprinkler shall be non corrodible, heavy duty complete all as specified including taking down old complete all as specified and directed by Engr-in-charge.
BARU ENTERPRISES
K S BUILDERS
Balbir Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .