Renovation of Civil and Electrical works at Flat nos A201, A211 of CTAF Guest House, Twin Tower, Prabhadevi, Regional Centre, CSIR-NIO, Mumbai

Amount

Dismantling tile work flooring in floors and roofs laid in cement mortar including stacking material within 50 metres lead for thickness of tiles 10 mm to 25 mm

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 1000x1000 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete Size of Tile 1000x1000 mm

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats

12 mm cement plaster of mix 1:4:

Melamine polishing on wood work (one or more coat).

Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade : Two or more coats on new work.and Applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap

Providing and fixing NICKEL chrome plated copper alloy Fancy BOTTLE TRAP ECONOMY TYPE 32MM Jaquar make or equivalent Confirming to IS 8931;1993

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete

Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.(a) 15 mm nominal dia

Proving and fixing white vitreous china Wall Hung type (European Type) water closet with seat and lid with C.I. brass hinges and rubber fittings with flush valve nelson/ similar fully chromium plated with stop cock, wall flanges, flush pipe or elbow and vaccum breaker coupling etc. including chair bracket/rag bolts, cutting & making good the walls and floors where required and concealed seat support - W.C. Pan with white plastic seat and lid

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.20 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc32 mm nominal outer dia Pipes

Providing & fixing c.p. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screws 750 x 20 mm size

Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards and Providing and fixing NICKEL chrome plated copper alloy Fancy Two Way Bib Cock with single knob and wall flange conforming to IS 8931:1993 15mm nominal bore.

Providing and fixing PVC SWR pipes confirming to IS 13592 type A including jointing with seal ring confirming to IS 5382 leaving 10 mm gap for thermal expansion. Single socketed pipe 75 mm dia

Providing and fixing PVC SWR pipes confirming to IS 13592 type A including jointing with seal ring confirming to IS 5382 leaving 10 mm gap for thermal expansion. Single socketed pipe 110 mm dia

Providing and fixing NICKEL chrome plated copper alloy Fancy waste coupling 32 mm with 190 mm long connection pipe wall flance Jaquar make or equivalent. Confirming to IS 8931; 1993

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : without drain board 610x460 mm bowl depth 200 mm

Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately

Providing and fixing toilet paper holder : C.P. brass

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead Of area 3 sq. metres and below

Providing and fixing powder coated aluminium with pure polyester powder of shade of required colour on the aluminium section shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: windows with two/three sliding shutters using 18 mm series shutters section.Figured glass

Providing and fixing powder coated aluminium with pure polyester powder of shade of required colour on the aluminium section shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Fixed windows/ ventilators matching with 18 mm series shutters. . Figured glass

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to openings /wooden frames with rawl plugs screws etc

Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters

30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc.complete

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :150x10 mm

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer Including fittings & fixtures

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece

Providing and fixing bright finished brass handles with screws etc.complete 125 mm

Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete.25 mm diameter

Providing and fixing bright finished brass flush bolts with necessary brass screws etc. complete : 250 mm

Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick Second class teak wood

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved

Description of Work / Item(s)

Amount

Wiring for light point /fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit using modular switches, Plates, suitable GI box and earthing the point with 1.5 Sq.mm FR PVC insulated copper conductor single core cable etc. as required.(Group- C)

Wiring for twin control light points with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit using two way modular switches, Plates, suitable GI box and earthing the point with 1.5 Sq.mm FR PVC insulated copper conductor single core cable etc. as required.

Wiring for submains / circuit wirng along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface / ressesed / consealed manner in medium class PVC Condiut including cutting of wall in case if concealed wiring and making the wall normal same as before to complete the work as required.

a) 2 x 1.5 sq.mm + 1 x 1.5 sq.mm. (Lighting Circuit)

b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm. (Lighting Submains & 5 amps plug points)

c) 2 x 4.0 sq.mm + 1 x 4.0 sq.mm ( All 15A power plug points )

d) 2 x 6.0 sq.mm + 1 x 6.0 sq.mm.( All AC power plug points. )

Supplying and fixing suitable size GI box with modular plate and cover in front on th surface or in recess, including providing and fixing 3 pin 5/6 Amps modular socket outlet and 5/6 A modular switch, connection and painting etc, as required for light plugs.

Supplying and fixing suitable size GI box with modular plate and cover in front on th surface or in recess, including providing and fixing of 6 pin 5/6 & 15/16 Amps modular socket outlet with 15/16 A modular switch, connection and painting etc, as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).

Supplying, fixing 20 A , 240 V, SPN industrial type socket outlet with 2 Pole & eath, metal enclosed plug Top along with 20 A 'C' series, SP MCB, in sheet steel enclosere on surface or recess, with chaines metal cover for the socket outlet and complete with connections, testing, commissioning etc., as required

Supplying and fixing of 1 or 2 Module (75mmX75mm), GI box alongwith modular base & cover plate for modular switches in recess etc as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Telephone (RJ-11) socket outlet

TV antenna socket outlet

RJ-45 Data Socket

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and drawing 2 pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing of 1 run of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of 6 way (4 + 18), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supply,Fixing,Testing & Commissioning of MCB's / Isolators/RCCB's in the existing MCB DB's complete with connections, testing and commissioning etc.as required. ("C" Curve)

5 - 32 amps MCB SP "C" Curve

40 Amps Isolators FP "C" Curve

63Amps, 2pole RCCB, 30mA

Supply & installation of 2 pole MCB box on recess / surface manner with 32 A DP MCB 'C'Curve complete with connections, testing, commissioning etc., for AC & Geyser as required

Supplying and fixing suitable size GI box with 1 no of 20/32 Amp DP fab Main switch with key rings tag 2 M in concealed/surface manner and complete with connections, testing, commissioning etc.,as required

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required..

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supplying and Fixing of wall mount Fan with 3 blades of 400 mm sweep, 60 Watts, etc., (Similar to Orient Electric Make model- 400mm Hi Speed Wall 46 or its equivalent) including wiring complete as required

Supply & fixing of 250 mm Exhaust / Ventilation fan with loovers if necessary after removal of old one to store, complete in all respect similar to Orient Make 250 mm Ventialor Fan or its equivalent

Supply & fixing of 300 mm Industrial Heavy duty 900 /1400 rpm Exhaust / Ventilation fans if necessary after removal of old one to store, complete in all respect similar to Orient Make H.D. EX Fan or its equivalent

Supplying & Fixing of modular blanking plates on the existing Modular box & Plates provided as required.

Supplying & Fixing of brass/ Pendent / Angle holder Bakelite including connection etc. as required.

Supplying & Fixing 3 pin / 5A Ceiling Rose 3 Plate on the existing jn / wooden block including connection etc as required.

Supply & fixing of following electrical materail,accessories & fittings complete in all respect and as per the instruction of the Engineer - in - charge at site.

Surface mounted slim 20 Watts LED panel downlights with powder coated finshed in round type. (equivalent to Wipro Product Code no:D732065 of Garnet Moon Light model)

Surface/ Wall mounted Sleek 10 Watts 2 Feet / 536mm LED Square Battern fittingwith inbuilt driver (equivalent to Wipro Product Code no:D571065 of Garnet model)

Surface/ Wall mounted Sleek 22 Watts High Lumen LED Batten fitting with inbuilt driver (equivalent to Wipro Product Code no:D532265 of Garnet High Lumen model)

Surface/ Wall mounted Sleek 20 Watts Dual Mode LED Batten with Night Lamp mode with toggle switching (equivalent to Crompton Twilight Cat no: LDNL20-CDL)

Decorative wall light, gold finish fixture with white glass diffuser suitable for 2 Nos 9.0 W LED Lamp/ 7.5 Watt LED filament lamp of E 27 base (equivalent to Havells make Gobleto WL 2LS E27 GLD model, Code no:LHFOAKD2TZ1D060)

Recess mounted 15 Watts LED panel downlights with eye protected Milky frosted diffuser on durable thermal conductive metal housing and inbuilt diffuser round type panel (equivalent to Crompton Greeves, Star Dura Panesl model Code no: LSDRSD -15-CDL)

Foot Light in 4 M box and Trease Cover (equivalent to Anchor Roma make, model, 22025/34386)

Surface / Recess mounted 06 Watts LED tilted and adjustable track light with necessary electronic driver (equivalent to Wipro Product Code no: D180627 of Garnet surface track light model)

LED Table lamp of 7 Watts with Digital Calender, multi-grade brightness dimmer, etc., (Equivalent to Crompton Make, Mellow Model no: LED7WTBL-M238A-BK)

Supplying and fixing call bell/ buzzer suitable for single phase 230 V, complete as required.

Removal of existing wiring from 1.5 sq.mm to 10 sq.mm/ Telephone / LAN Wires with PVC conduit/metal conduit /PVC casing capping and shifting the material to stores as instructed by Engineer in charge.

Removal of old light fitting of all types like single tube/double tube etc and shifting the material to stores as instructed by Engineer in charge.

Removal of old ceiling/exhaust/wall mounting Fan etc and shifting the material to stores as instructed by Engineer in charge.

Removal of old switch board of different sizess upto 16 Way approx and shifting the material to stores as instructed by Engineer in charge.

Description of Work / Item(s)

SUMMARY SHEET FOR RENOVATION OF GUEST HOUSE WORKS AT TWIN TOWERS, PRABHADEVI, MUMBAI

TOTAL OF BoQ1 FOR PART A - CIVIL WORKS

TOTAL OF BoQ2 FOR PART B - ELECTRICAL WORKS

ORIENTAL INTEGRATED FACILITY MANAGEMENT PVT. LTD.

PAL GULHARE CONSTRUCTIONS

DM Enterprises

M/s SRV Construction Co.

Rajshree construction consortium

PAL GULHARE CONSTRUCTIONS

Ktij Enterprises Pvt. Ltd.

Rajshree construction consortium

ORIENTAL INTEGRATED FACILITY MANAGEMENT PVT. LTD.

DM Enterprises

ORIENTAL INTEGRATED FACILITY MANAGEMENT PVT. LTD.

PAL GULHARE CONSTRUCTIONS

M/s SRV Construction Co.

DM Enterprises

Rajshree construction consortium