REPAIR/MAINT OF ROAD FURNITURE PATHWAYS, CURBSTONE AND CONNECTED ITEMS UNDER AGE B/R II AT OLD AMRITSAR CANTT UNDER GE ASR

Amount

S&F Delineators DA 952 with plate size of plate is 200x80mm on two sides with reflective signs fixed on MS pipe of 50mm duly powder coated, anty-rust & anty theft steel net Size- 700x80x200mm complete all as specified and directed. Make: Dark Eye/Sinor/Road Knight

Supply & fixing of double legend informately sign board single as well as double sided fixed on single frame and meeting back to back on the square pipe. (This is double sided board the boards are high intebsty green / blue or as required colour grid retro-reflective of every dennision made out 2mm thick alco bound sheet confirm to IS-736 to be covered with high intensity grade retri-reflective sheeting (Avery Dennison) of Green/Blue as per IRC standard. The board are made on Alco bond sheet as per required size. Retro reflective sheeting is fixed on this alco bond sheets wih suitable adhesive. The letter writing is done with computersed cut machine and fixed on this retro- relective sheeting. This board is mounted on MS Frame of size 35x35 mm square pipe witch is duly panted after coting of the primer. This bd fixed on the frame with POP riverts. Two leg post of square pipe of size 50mm are fixed to the board length of the leg post is 10 ft. for double sided bd two such bd made on alco bond sheets are fixed on the single frame of 35x35mm square pipe with back to back this are mounded with POP rivets. Two leg post of square pipe of size 15mm are fixed two bd length of the leg post is 10ft.High intensity reflective sign bd made of hardened ACP sheets 2mm thick pop rivters steelness steel rectangular pipe of size 50x25mm frame of size 900/1200mm . Frame supported with bd over 16mm round 3meter long stainless steel pipe of bonded clamps. All stainless steel bonded parts should be polished. Sign board shuld be reflective on one side with HIP sheet and overlay film of blue color with computer cut letters, sign and border complete all as as specified and directed by Engr -in- Charge. Two boards on single frame are fixed back to back to look as one for D/S Board .

S & F Directional arrow sign board of size 900mmx250mmx600mm made of CRC sheet duly welded to Steel frame of size 35mm x35mm square pipe & having hold fast of size 100mm x 100mm. The computer sign board shall be powder coated along with two coats of primer for long life. The sign board shall be fully reflectorised with white high intensity retro reflective sheeting. It is to be installed with concerte block of 1x1x4 Directional arrow sign board Sinor complete all as specified and directed.

S&F Speed Breaker DA 1001 of size 425 x 75 x 500mm. The body of the speed breker is made of ABS material . Two highly reflective reflectors moulded in PMMA meterial are welded with ABS plate through ultasonic welding process and than fixed on two speed breaker with reflector on both sides including black and yellow colour with all arrangement of fixing complete all as specified and directed.

S&F for Convex mirror 800mm dia made of PC material with suitable MS pipe post duly painted as per site requirement . It should have clear and definite mirror image having 130 degreeof viewing angle at junction of Road or blind turning of suitable size complete all as specified and directed.

Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 using WPC 2% of weight of cement and finishing even and smooth without using extra cement complete all as specified and directed. (WPC measured and paid saperatly)

Supply only integral water proofing compound complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint of shade as approved over a coat of cement primer on wall surfaces complete all as specified and directed.

M&L for preparation of old plastered surfaces and applying one coats of cement base paint of shade as approved complete all as specified and directed.

Dismantaling of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed.

M&L for Brick work with sub class "B: bricks straight or curved on plan exc 6 m mean radius in CM 1:4 complete all as specified and directed.

All as per item no 12 here-in-before but except brick complete all as specified and directed.

M&L for Machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and no pigments over and including 25mm thick sand cushioning complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 finishing even and smooth without using extra cement complete all as specified and directed

M&L preparation of old painted surfaces of steel of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L preparation of old painted surfaces of curb stone of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L preparation of new surface of curb stone of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint complete all as specified and directed.

M&L preparation of old painted surfaces of steel of any description over 10cm width or girth not otherwise described and applying one coat of aluminium paint complete all as specified and directed.

Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete, brickwork or masonry and making good disturbed ground complete all as specified and directed.

Dismantling of One Way Trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately) complete all as specified and directed.

Providing precast cement concrete louvres and jallis, 40mm thick(measured solid) of type C0 1:3:6(12.5 mm graded aggregate and set in cement mortar 1:4), including all moulding but excluding frame complete all as speified and directed.

M&L Providing precast reinforced cement concrete type B-1 1:2:4(20mm aggregate) as in posts,fencing, straining or terminal posts, struts etc for fencing average sectional area exc 100sqcm and not exc 250sqcm with or without chamfered angles and flat, splayed, rounded or mirted tops complete all specified and directed.

M & L for Pre-cast cement concrete type B-1 (1:2:4) 20mm graded stone aggregate for kerb stone block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1 : 4 complete all as specified and directed.

S & F Mild steel round bars 5-6mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

GEE EMM ASSOCIATES

M/s Vijay Construction Co.

kapoor and co