AGE I CGN 06 24 25 MISC REPAIR TO STREET LIGHT GARDEN, GATE LIGHT AND EM INSTALLATIONS UNDER AGE (I) CG NOIDA

Amount

Excavation in trenches not exc. 1.5 m in depth and not exc. 1.5 m wide for taking out or laying PVC cable/ GI pipe of any size in soft/loose soil complete all as specified and directed.

Returning, filling in trenches including spreading levelling, watering and well ramming in layers n.exc. 25 cm thick in soft/loose soil complete all as specified and directed.

Removing of surplus soil/excavated material to a distance not exc. 50 m away from the starting point and depositing where directed at al level not exc. 1.5 m above the starting point complete all as specified and directed.

Material and labour for sand cushioning in layer not exc. 25 cm thick spreading out, levelling complete all as specified and directed.

Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1 flat size ,250mm x 150mm x 40mm cable for protection complete all as specified and directed.

Taking down carefully street light fittings of any make and capacity and any type, opening for examination & for replacement of unserviceable spare part and refixing the same in position after necessary repairing at the same / other location, including provision of necessary T&P like ladder / Boom Vehicle, tools etc as required for taking down & refixing of Street light complete. Note:- Replacement of defective spare part of fitting (to make it functional) will be measured & paid separately as supply only. However, cost of replacement of unserviceable screws, nuts, bolts and cleaning of fitting shall be deemed to be included in quoted rate.

Taking out LT underground cable from trenches etc, aluminium conductor of size 6/10 sqmm 2 core all as specified and directed. Note:-Earthwork will be measured and paid separately under respective items of this Schedule.

Supply, laying,testing and connection of XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable, with aluminium conductor 1100 volt grade of size 6 Sqmm 2 core laid in trenches / duct passing through pipe / duct or fixed on pole, complete all as specified & directed.

Supply, laying, testing and connection of XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable, with aluminium conductor 1100 volt grade of size 10 Sqmm 2 core laid in trenches / duct passing through pipe / duct or fixed on pole, complete all as specified & directed.

S&F in replacement post top lantern LED type 20 watt 230 volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified.

S&F in replacement LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F in replacement LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F in replacement LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F in replacement LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

S&F in replacement LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

M&L for preparation of old painted surface of steel tubular pole 9 metre long & applying one coats of aluminium paint on exposed surface, painting of band in alternate strip of 0.25 metre each with yellow & black synthetic enamel paint upto 1.5 meter height above PCC coping, including writing pole No with black synthetic paint complete as specified & directed

M&L for preparation of old painted surface of steel tubular pole 11 metre long & applying two coats of aluminium paint on exposed surface, painting of band in alternate strip of 0.25 metre each with yellow & black synthetic enamel paint upto 1.5 meter height above PCC coping, including writing pole No with black synthetic paint complete as specified & directed

S&F of Galvanised steel tubes, 40 mm bore, light grade passing through electric cable for crossing road, drain or vertical support to wall or protection for cable complete as specified and directed.

S&F in replacement pole mounted juction box made out of one piece moulded SMC IP65 protection having aluminium bus bars 100 Amp single phase and neutral with one No MCB SPN 6 Amp for street light, cable entry from bottom, maintenance free size inside dimension 300x200x105 mm fixing on pole with MS flat 25x3mm clamp including nut bolts front openable all as specified and directed.

S&F in replacement 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and neutral (SPN) current carrying capacity 6 AMP, in the street light junction box complete with connection testing and commissioning all as specified and directed.

Supply, laying & testing PVC insulated, PVC sheathed cable galvanized steel strip or wire armoured, electric control cables (Heavy duty) with stranded copper conductor of size 1.5 sq mm, 3 core, 1100 Volts grade complete including taking down old cable all as specified and directed..

M&L for fabrication of street light bracket made of GI pipe light grade of bore 40 mm bent to 45 degree angle , length of bracket not less than 1.5 meter including 4 nos. of MS clamp of thickness not less than 5 mm with nut, bolts,washers including applying one coats of red oxide primer and one coat of black paint complete all as specified and directed by Engg. In Charge.

M&L for fabrication of street light bracket made of GI pipe light grade of bore 25 mm bent to 45 degree angle , length of bracket not less than 1.5 meter including 4 nos. of MS clamp of thickness not less than 5 mm with nut, bolts,washers including applying one coats of red oxide primer and one coat of black paint complete all as specified and directed.

S&F in replacement LED bollard light fitting 10 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete as specified and directed Make : Bajaj model name tulip or equivalent of make Crompton/Havells.

Supply only LED Electronic driver 70 W, 0.7A, 240V, 50Hz operating range 120-277V complete as per existing LED driver.

Supply only LED Electronic driver 150 W 0.7A, 240V, 50Hz operating range: 120-277V complete as per existing LED driver.

Supply only LED Electronic driver for street light 45W, 240V, 50Hz operating range: 120-277V complete as per existing LED driver.

Supply only LED Electronic driver for street light 60 W, 240V, 50Hz operating voltage range 100-107V complete as per existing LED driver.

Supply only LED Electronic driver for street light 90 W, 240V, 50Hz operating voltage range 100-107V complete as per existing LED driver.

M&L for plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete all as specified and as directed.

M&L for plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete all as specified and as directed.

M&L for PCC (1:2:4) type B1 using 20mm graded stone aggregate for coping of poles complete including demolition of old coping all as specified and directed.

S&F in replacement 3 pole contactor 440 volts 50 Hz 3 phase 25-45 Amps rating complete including fixing in existing street light panel complete all as specified and directed. Make : L & T cat no. CS94110 or equivalent of Siemens/ Schneider. Note: All fixing arrangement, cutting welding of existing panel board as per site requirement deemed included in quoted rates.

M&L in replacement for 20mm dia rigid non-metallic PVC conduit excluding boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc., complete including fixing on pole all as specified and as directed.

Fixing only LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Fixing only round shape 9 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete

S&F in replacement time switches astro type (having longitude and latitude of Indian cities in memory) 110 V-240 V AC three phase complete including connecting all as specified and directed. Make L&T Cat no. T3DDT0 or equivalent of Scheinder/Siemens

Fixing only round shape 3 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete

friends associeates

DP COMPLEX

Sanjay Associates

KRISHANA ELECTRIC WORKS

PRASAD ELECTRICALS