Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.3 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹31.9 L+₹52,543 (1.67%)Rejected-Finance | L2 | Rejected-Finance Other than Lowest Bidder | |
| 3 | L3₹33.4 L+₹2.0 L (6.28%)Rejected-Finance | L3 | Rejected-Finance Other than Lowest Bidder | |
| 4 | L4₹34.5 L+₹3.1 L (9.95%)Rejected-Finance NEAR AVON PUBLIC SCHOOL DABHANW POST DANDI NAINI PRAYAGRAJ 211008 | PRAYAGRAJ | PRAYAGRAJ | UTTAR PRADESH | 211008 | L4 | Rejected-Finance Other than Lowest Bidder | |
| 5 | L5₹34.8 L+₹3.4 L (10.7%)Rejected-Finance | L5 | Rejected-Finance Other than Lowest Bidder |
| Sl No | Description | Qty | Unit | M/S SS Tarders L7 | DINESH ELECTRICALS L2 | C K ENTERPRISES L1 | NEXT POWER ENTERPRISES L4 | PITAMBARI TRADERS L8 | Raj Contruction L5 | Aawadh associates L3 | R.K.ASSOCIATES L6 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Receiving complaints from complaint cell, lodged by the occupants of electrification nature, rectification of the fault as per the complaint lodged by the user onward KWH meter in respect of main distribution board having switch fused, MCB distribution board in sheet metal enclosure, point wiring fixture for light/fan/bell/light/Ceiling Fan, testing of Electronic meters or power socket complete repairs to the extent by removing connections from the system removing faults in wires, battens, conduit, sunken boxes, junction boxes, main switches, MCBs/DBs utility light fitting, lamp holders AC ceiling/exhaust fans and other connected fixtures of the internal electrification including providing of petty stores such as wires of appropriate size and conductor matching to existing one up to the length of 1 mtr including insulation tap, screws, nuts as required to rectified the fault with regard to the complaint lodged and refixing of fittings, fixture to their position as dismantled complete all as directed at site to the entire satisfaction of Engr-in-charge
Note - (i) All spares required and accessories, required for repairing will be paid under relevant items of this schedule.
Instructions -(a) Attending complaint including taking down/refixing of LED light fittings and repair/ Replacement part (Labour ) and minor repair shall be measured against under relevant of Sch "A items .
(b) Cost of material and labour for replacement of new items shall be measured and paid separately .
(c) Panalty : Penalty for not attending complaints within stipulated time frame will be the liable to Rs 500.00 of per day for non attending the complaints multiple number of days of delay
(d) Priority -1 (to be done within 8 hours from time of lodging complaint): No light, repair/replacement of switches, fan regulator, replacing burnt/damaged wiring, replacement of burnt MCBS and Main switch, voltage fluctuation, current leakage and replacement of tube lights.
(e) Supervisor well maintain all states of complaint and submit to concern JE | 4,200 | Each Complaint | 100 ₹4,20,000 | 40 ₹1,68,000 | 25 ₹1,05,000 Lowest | 70 ₹2,94,000 | 70 ₹2,94,000 | 68 ₹2,85,600 | 40 ₹1,68,000 | 100 ₹4,20,000 |
| 2.00 | S&F in repalacement of modular switch 1 way, 6 Amps, 230V AC, one way complete all as specified & directed. | 600 | Each | 20 ₹12,000 Lowest | 25 ₹15,000 | 40 ₹24,000 | 30 ₹18,000 | 35 ₹21,000 | 25 ₹15,000 | 45 ₹27,000 | 28 ₹16,800 |
| 3.00 | S&F in repalacement in repalacement of modular socket out let 2-in-1, 3 pin, 6 Amp flush type 2 module complete all as specified & directed. | 400 | Each | 85 ₹34,000 | 70 ₹28,000 | 85 ₹34,000 | 60 ₹24,000 | 40 ₹16,000 Lowest | 90 ₹36,000 | 90 ₹36,000 | 85 ₹34,000 |
| 4.00 | S&F in repalacement in repalacement of modular switch flush type 16 Amps, 230 Volts AC single pole one way complete all as specified & directed. | 200 | Each | 110 ₹22,000 | 80 ₹16,000 | 90 ₹18,000 | 50 ₹10,000 Lowest | 98 ₹19,600 | 120 ₹24,000 | 105 ₹21,000 | 80 ₹16,000 |
| 5.00 | S&F in repalacement in repalacement of modular socket out let 2-in-1, 3 pin, 5 & 16 Amps flush type 2 module complete all as specified & directed. | 200 | Each | 180 ₹36,000 | 130 ₹26,000 | 130 ₹26,000 | 110 ₹22,000 | 98 ₹19,600 Lowest | 200 ₹40,000 | 120 ₹24,000 | 135 ₹27,000 |
| 6.00 | S&F in repalacement of modular switch 2 way, 6 Amps, 230 Volts AC, one way complete all as specified & directed. | 10 | Each | 85 ₹850 | 60 ₹600 | 40 ₹400 Lowest | 60 ₹600 | 45 ₹450 | 90 ₹900 | 45 ₹450 | 70 ₹700 |
| 7.00 | S&F in repalacement of modular bell push flush type 6 Amps, 1 module SP, 230 Volts AC complete all as specified & directed. | 20 | Each | 75 ₹1,500 | 70 ₹1,400 | 45 ₹900 | 70 ₹1,400 | 70 ₹1,400 | 95 ₹1,900 | 40 ₹800 Lowest | 75 ₹1,500 |
| 8.00 | S&F in repalacement of modular fan regulator, 5 stepped, electronic type, single phase, 120 watt, socket size incl connection complete all as specified & directed. | 100 | Each | 280 ₹28,000 | 250 ₹25,000 | 320 ₹32,000 | 240 ₹24,000 | 220 ₹22,000 Lowest | 300 ₹30,000 | 340 ₹34,000 | 290 ₹29,000 |
| 9.00 | S&F in repalacement of switch piano flush button single pole one way 6 amps all as specified and as directed | 800 | Each | 20 ₹16,000 | 18 ₹14,400 | 22 ₹17,600 | 20 ₹16,000 | 22 ₹17,600 | 17 ₹13,600 Lowest | 25 ₹20,000 | 17 ₹13,600 Lowest |
| 10.00 | S&F in repalacement of switch 2 way, 6 amps, 230V AC, one way complete all as specified & directed. | 50 | Each | 60 ₹3,000 | 35 ₹1,750 | 40 ₹2,000 | 30 ₹1,500 | 25 ₹1,250 Lowest | 60 ₹3,000 | 48 ₹2,400 | 35 ₹1,750 |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
16 Aug 2025, 6:00 pmClosed
GE WEST PRAYAGRAJ
Garrison Engineer (West), New Canttt, Prayagraj-211001
COMPREHENSIVE MAINTENANCE OF INTERNAL ELECTRIFICATION OF OTM ACCN AT NEW CANTT UNDER GE (WEST) PRAYAGRAJ
2025_MES_720072_1
8825/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
NEW CANTT PRAYAGRAJ
As per tender documents
7 documents required · 7 mandatory
₹500
GE WEST PRAYAGRAJ
₹1 L
Yes
7 Oct 2025
14 Jul 2025
23 Aug 2025
14 Jul 2025
16 Aug 2025
2 Aug 2025
Amount
Receiving complaints from complaint cell, lodged by the occupants of electrification nature, rectification of the fault as per the complaint lodged by the user onward KWH meter in respect of main distribution board having switch fused, MCB distribution board in sheet metal enclosure, point wiring fixture for light/fan/bell/light/Ceiling Fan, testing of Electronic meters or power socket complete repairs to the extent by removing connections from the system removing faults in wires, battens, conduit, sunken boxes, junction boxes, main switches, MCBs/DBs utility light fitting, lamp holders AC ceiling/exhaust fans and other connected fixtures of the internal electrification including providing of petty stores such as wires of appropriate size and conductor matching to existing one up to the length of 1 mtr including insulation tap, screws, nuts as required to rectified the fault with regard to the complaint lodged and refixing of fittings, fixture to their position as dismantled complete all as directed at site to the entire satisfaction of Engr-in-charge Note - (i) All spares required and accessories, required for repairing will be paid under relevant items of this schedule. Instructions -(a) Attending complaint including taking down/refixing of LED light fittings and repair/ Replacement part (Labour ) and minor repair shall be measured against under relevant of Sch "A items . (b) Cost of material and labour for replacement of new items shall be measured and paid separately . (c) Panalty : Penalty for not attending complaints within stipulated time frame will be the liable to Rs 500.00 of per day for non attending the complaints multiple number of days of delay (d) Priority -1 (to be done within 8 hours from time of lodging complaint): No light, repair/replacement of switches, fan regulator, replacing burnt/damaged wiring, replacement of burnt MCBS and Main switch, voltage fluctuation, current leakage and replacement of tube lights. (e) Supervisor well maintain all states of complaint and submit to concern JE
S&F in repalacement of modular switch 1 way, 6 Amps, 230V AC, one way complete all as specified & directed.
S&F in repalacement in repalacement of modular socket out let 2-in-1, 3 pin, 6 Amp flush type 2 module complete all as specified & directed.
S&F in repalacement in repalacement of modular switch flush type 16 Amps, 230 Volts AC single pole one way complete all as specified & directed.
S&F in repalacement in repalacement of modular socket out let 2-in-1, 3 pin, 5 & 16 Amps flush type 2 module complete all as specified & directed.
S&F in repalacement of modular switch 2 way, 6 Amps, 230 Volts AC, one way complete all as specified & directed.
S&F in repalacement of modular bell push flush type 6 Amps, 1 module SP, 230 Volts AC complete all as specified & directed.
S&F in repalacement of modular fan regulator, 5 stepped, electronic type, single phase, 120 watt, socket size incl connection complete all as specified & directed.
S&F in repalacement of switch piano flush button single pole one way 6 amps all as specified and as directed
S&F in repalacement of switch 2 way, 6 amps, 230V AC, one way complete all as specified & directed.
S&F in repalacement of socket outlet 5 pin 6 amp flush type complete all as specified & directed.
S&F in repalacement of socket out let multipurpose 3 pin 16 amp and one 3 pin 6 amp controlled by one switch complete all as specified & directed.
S&F in repalacement of switch piano flush button single pole one way 16 amps complete all as specified & directed.
S&F in repalacement of switch & socket out let combination multipurpose 3 pin 16 amp and one 3 pin 6 amp controlled by one switch complete all as specified & directed.
S&F in repalacement of ceiling fan regulator step type 240 Volt AC complete all as specified & directed.
S&F in repalacement of PVC insulation tape of width -18mm in length of 25 mtr ISI marked for proper insulation of joints in wire where as required complete all as specified & directed.
S&F in repalacement of condenser of 2.5 Mfd , 240 volt, AC confirming to IS -1709 suitable for fans complete all as specified & directed.
S&F in repalacement of condenser of 3.15 Mfd , 240 volt, AC confirming to IS -1709 suitable for fans complete all as specified & directed.
S&F in repalacement of ceiling rose surface backelite three terminals complete all as specified & directed. Make Anchor/havells/legrand
S&F in replacement of MCB 63 to 100 Amps TPN 10 KA C curve 415 volt complete all as specified and directed.
S&F in replacement of MCB SPN 63 AMPS KA C curve 240 Volt complete all as specified and directed.
S&F in replacement of MCB SPN 40 AMPS 10 KA C curve 240 volt complete all as specified and directed.
S&F in replacement of MCB Single pole 6 to 32 Amp, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.
S&F in replacement of MCB Single pole 63 Amp, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.
S&F in replacement of MCB Single pole 40 Amp, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.
S&F in replacement of MCCB 100 Amp 4 pole 25 KA at 415 V fixed type complete all as specified and directed.
S&F in repalacement of call bell Dingdong type AC 230 Volts single pole complete all as specified & directed.
S&F in repalacement of bell push flush type 6 amp, 230V AC complete all as specified & directed.
S&F in replacment of Modular metal flush box of 12 module complete all as specified and dircted.
S&F in replacment of Modular metal flush box of 8 module complete all as specified and dircted.
S&F in replacment of Modular metal flush box of 6 module complete all as specified and dircted.
S&F in replacment of Modular metal flush box of 4 module complete all as specified and dircted.
S&F in replacment of Modular metal flush box of 3 module complete all as specified and dircted.
S&F in replacment of Modular metal flush box of 2 module complete all as specified and dircted.
S&F in replacment of Modular white plate cover with frame of 12module complete all as specified and dircted.
S&F in replacment of Modular white plate cover with frame of 8 module complete all as specified and dircted.
S&F in replacment of Modular white plate cover with frame of 6 module complete all as specified and dircted.
S&F in replacment of Modular white plate cover with frame of 4 module complete all as specified and dircted.
S&F in replacment of Modular white plate cover with frame of 3 module complete all as specified and dircted.
S&F in replacment of Modular white plate cover with frame of 1/2 module complete all as specified and dircted.
Taking down carefully aluminium / copper point wiring any type for one light , fan, socket power point or buzzer controlled by one switch complete including fitting / fixtures such as switches, ceiling roses, holder, socket, light fitting etc; for credit and making good disturbed surfaces of walls, ceilings etc complete all as specified & directed.
M&L for point wiring with FRLS/FRLSH PVC insulated unsheathed multi stranded copper conductor cable 1.5 Sqmm (nominal area) 1100 volts grade, along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly drawn in and including non metallic PVC rigid, medium grade concealed conduit with all fixing accessories of 20mm dia, and including modular sunken box, cover plate / frame for any module as requiredat site with all accessories and including fixing with switch, socket, ceiling rose, fan regulator, holder, etc and making good to disturbed conceal surfaces complete all as specified and directed for the following :- Note: (a) Colour code of wire shall be strictly followed , Red for Phase , Black for neutral and green for earth wire. (b) The unit rate quoted is deemed to be inclusive of cost of cutting chases in wall for providing concealed conduit and making good to match with existing finish/surface.
(a) One light/fan/bell point controlled by one switch
(b) One point for socket outlet 5 amps on independent board
(c) One point for socket outlet 5 amp same board
(d) All as per same above but for one socket outlet 16 Amp on independent board with 4.0 Sq mm cable and 4.0 Sq mm earth wire.
M&L for point wiring with FRLSH PVC insulated unsheathed multi stranded copper conductor cable 1.5 Sqmm (nominal area) 1100 volts grade, along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly drawn in and including non metallic PVC rigid, medium grade concealed conduit with all fixing accessories of 20mm dia, using new pressed steel sunk terminal boxes of thickness not less 1.2mm, new 3mm thick laminated sheet cover with brass screw and cup washers with all accessories including fixing with switch, socket, ceiling rose, fan regulator,holder, etc. and making good to disturbed conceal surfaces complete all as specified and directed for the following :- Note:(a) Colour code of wire shall be strictly followed , Red for Phase , Black for neutral and green for earth wire (b) The unit rate quoted is deemed to be inclusive of cost of cutting chases in wall for providing concealed conduit and making good to match with existing finish/surface
(a) One light/fan/bell point controlled by one switch
(b) One point for socket outlet 5 amps on independent board
(c) One point for socket outlet 5 amp same board
(d) One light point controlled by two 2-way switches
(e) All as per same above but for one socket outlet 16 Amp on independent board with 4.0 Sq mm cable and 4.0 Sq mm earth wire.
M&L for point wiring with FRLSH PVC insulated unsheathed multi stranded copper conductor cable 1.5 Sqmm (nominal area) 1100 volts grade, along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly drawn in and including non metallic PVC casing and caping/PVC conduit of appropriate size on wall/roof surface with all fixing accessories including fixing with switch, socket, ceiling rose, fan regulator,holder, etc. and polycarbonate modular/modular GI sunken boxs, and modular sunken box, cover plate / frame for any module as required at site with all accessories and making good to disturbed conceal surfaces complete all as specified and directed for the following :- Note:(a) Colour code of wire shall be strictly followed , Red for Phase, Black for neutral and green for earth wire.
(a) One light/fan/bell point controlled by one switch
(b) One point for socket outlet 5 amps on independent board
(c) One point for socket outlet 5 amp same board
(d) All as per same above but for one socket outlet 16 Amp on independent board with 4.0 Sq mm cable and 4.0 Sq mm earth wire.
Taking down carefully sub main wiring of any type/size complete with MCB DBs MCB, isolators wooden batten, concealed/surface conduit/casing caping etc. removing materials including accessories for taking credit and making good disturbed surface to match the existing complete all as specified & directed.
M&L for concealed sub main wiring using FRLS/FRLSH PVC insulated, unsheathed multi stranded copper conductor cable single core of following sizes of voltage rating upto and including 1100 volts drawn in and including rigid PVC concealed conduit of dia not less than 20 mm dia medium grade with all fittings and accessories along with one run of PVC insulated unsheathed stranded copper conductor as earth continuity conductor complete all as specified & directed. Note:- (i) Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one length. (ii) The cost for cutting, chases required and making good the disturbed surface shall deemed to be included in the quoted unit rate.
(a) 2x4.0 sq. mm + 1x4.0 sq. mm earth wire
(b ) 2x6 sq. mm + 6x sq. mm earth wire
(c ) 2x10 sq. mm + 10x sq. mm earth wire
(d) 4x10.0 sq. mm +1x10.0 sq. mm earth wire
M&L for surface sub main wiring using FRLS/FRLSH PVC insulated, unsheathed multi stranded copper conductor cable single core of following sizes of voltage rating upto and including 1100 volts drawn in and including non metallic PVC rigid, medium grade not less than 20mm dia surface conduit / non metallic PVC casing and caping with all fittings and accessories along with one run of PVC insulated unsheathed stranded copper conductor as earth continuity conductor complete all as specified & directed. Note:- (i) Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one length. (ii) The cost for cutting, chases required shall deemed to be included in the quoted unit rate.
(a) 2x2.5 sq. mm + 1x2.5 sq. mm earth wire
(b) 2x4.0 sq. mm + 1x4.0 sq. mm earth wire
(c ) 2x6 sq. mm + 6x sq. mm earth wire
Supply and fix in replacement of A C starter unit consisting of one 25 Amp capacity starter, one 240 V 25 Amps 10 KA SPN MCB, one 25 Amps socket and one 25 Amps plug top prewired complete as specified after taking out old unserviceable starter unit all as directed.
Supply and fixing in replacement of Flexible led strips with uniform light distribution and long lasting adhesive for perfect cove lighting solution Flexion Neo Led Strip 24 W 3000 K as approved by Engr-in-charge for ceiling applications as specifed and directed
Supply and fixing Angle/Batten type Lamp holder, PVC/Polycarbonate type with back plate suitable for light fittings complete all as spcified and directed.
Supply & Fix in replacment single pole and neutral enclosure with a two pin earth plug and socket complete with one single pole MCB 20 Am "B" Curve.complete all as specified and directed.
Taking down main switches fuse unit, MCB/Kit kat distribution board any type/size/capacity with steel enclosure along with MCB’s /Kit kat fuse of any amps/ways including wooden board or from steel board and making good disturbed surfaces complete all as specified and as directed. Note: Any disturbed surfaces of wall will be matched properly as the existing colour surfaces.
Supply and fixing in replacement of factory made epoxy polyester powder coated distribution board SP & N 4 way fabricated from recommended thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including aluminium alloy bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 2 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 alongwith cable end box for above DB all as specified and directed. (Make : Legrand/GE Power/ Schnieder or equivalent approved by GE) (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. (c) making good and finishing of disturbed surfaces matching with the exisitng surfaces plastering, wood box work, painting if reqd any type incl ecessary fixing arrangements complete deemed to be included under respective item of sch. (d) Make of MCBs /MCCBs and MCB DBs shall be same makes.
Supply and fixing in replacement of factory made epoxy polyester powder coated distribution board SPN 8 way fabricated from recommended thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including aluminium alloy bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 alongwith cable end box for above DB all as specified and directed. Make : Legrand/GE Power/ Schnieder or equivalent approved by GE) NOTE: (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. (c) making good and finishing of disturbed surfaces matching with the exisitng surfaces plastering, wood box work, painting if reqd any type incl ecessary fixing arrangements complete deemed to be included under respective item of sch. (d) Make of MCBs/MCCBs and MCB DBs shall be same makes.
Supply and fixing in replacement of factory made epoxy polyester powder coated distribution board SPN 12 way fabricated from recommended thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including aluminium alloy bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP/SPN MCB as incomer and 8 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 alongwith cable end box for above DB all as specified and directed. Make : Legrand/GE Power/ Schnieder or equivalent approved by GE) NOTE- (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. (c) making good and finishing of disturbed surfaces matching with the exisitng surfaces plastering, wood box work, painting if reqd any type incl ecessary fixing arrangements complete deemed to be included under respective item of sch. (d) Make of MCBs/MCCBs and MCB DBs shall be same makes.
Supply and fixing in replacement of factory made epoxy polyester powder coated distribution board TPN 4 way fabricated from recommended thick CRCA sheet with metal double door (IP-43 protection ) door IK 09 fixed flush to wall and suitable for universal mounting and including aluminium alloy bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable MCBs as complete all as specified and conforming to IS: 8623 alongwith cable end box for above TPN/isolator all as specified and directed. Make : Legrand/GE Power/ Schnieder or equivalent approved by GE) NOTE (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. (c) making good and finishing of disturbed surfaces matching with the exisitng surfaces plastering, wood box work, painting if reqd any type incl ecessary fixing arrangements complete deemed to be included under respective item of sch. (d) Make of MCBs/ MCCBs and MCB DBs shall be same makes.
Supply and fixing in replacement of factory made epoxy polyester powder coated distribution board TPN 4 way (VTPN MCCB DB) with metal double door (IP-43 protection) and double door IK-09 fabricated from recommended thick CRCA sheet and fixed on wall and suitable for universal mounting and including aluminium alloy bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with including for DPX 125 4 pole MCCB as incommer and 16 to 32 SP MCBs outgoings complete all as specified and conforming to IS: 8623 along with cable end box for above DB all as specified. Make : Legrand/GE Power/ Schnieder or equivalent approved by GE) NOTE :-(a) MCBs/MCCB shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. (c) making good and finishing of disturbed surfaces matching with the exisitng surfaces plastering, wood box work, painting if reqd any type incl ecessary fixing arrangements complete deemed to be included under respective item of sch. (d) Make of MCBs/MCCBs and MCB DBs shall be same makes.
S&F for MCB 63 to 100 Amps TPN 10 KA C curve 415 volt complete all as specified and directed.
S&F for MCB SPN 40-63 AMPS KA C curve 240 Volt complete all as specified and directed.
S&F for MCB SPN 32 AMPS 10 KA C curve 240 volt complete all as specified and directed.
S&F for MCB Single pole 6 to 32 Amp, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.
S&F in repair MCB Single pole 40 -63 Amp, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.
Supply and fix in replacement of MCCB 125 Amp 4 pole 25 KA at 415 V fixed type complete all as specified and directed.
Supply and fix in replacement of MCCB 100 Amp 4 pole 25 KA at 415 V fixed type complete all as specified and directed.
Supply and fix in replacement of MCCB 160 Amp 4 pole 36 KA at 415 V fixed type with shhet metal enclousre compitable to mount it including all lugs, seprater etc complete all as specified and directed.
M&L for cutting / boring of PCC/hard standing at a depth not more than 15 cm deep and 15 cm in breadth for passing earthing conductor and making good the disturbed surfaces with PCC (1:2:4) type B-0 or cement mortar (1:3) complete all as specified and directed.
Supply and fixing in replacement of 20 mm dia non Metallic Rigid PVC casing caping/conduit pipe of size, ISI Marked, conforming to IS 9537 Part III, medium grade including all fittings like bends, elbow reducer, junction boxes, tee bell mouth all fixing accessories such as coupler lock, nuts, saddles pipe hooks etc complete all as specified and directed.
Description same all as per item No 67 here in above but size 25 mm dia complete all as specified and directed.
Supply & fixing in replacement of worn out/rusted sunken box of following sizes with pressed MS/GI steel terminal boxes of depth not less than 50 mm, flush type of thickness lot less than 1.22 mm of following size along with new 3.0 mm thick plastic laminated sheet cover of suitable size including cutting/drilling hole and fixing switches, sockets, fan regulator etc as removed from old sheet and fitted with cadmium plated screw washer and making good to disturbed surface with cement mortar complete all as specified and directed.
(a) 100 mm X 100 mm
(b) 175 mm X 100 mm.
(c) 250 mm X 200 mm.
Supply and fixing in replacement of Decorative, wall mounting, fixture with plastic body (City type -1) as per sample approved by Engr-in-charge including 9 W LED lamp B22 complete all as specified and directed.
Supply & fixing in replacement Three pin metalic socket outlet suitable for sheet metal enclosure complete all as specified and directed. Make : Bentac/C&S/HPL or equialent as approved by GE.
Supply & Fixing in replacement Three pin metallic plug top suitable for sheet metal enclsoure complete all as specified and directed. Make : Bentac/C&S/HPL or equialent as approved by GE.
M&L for Dismantling of ceiling fans AC single phase 230 volts of sizes 1200mm/1400mm any make / model , dismantled its stator, rotor, cutting out burn copper winding and providing New Winding with super enamelled copper winding wire existing size including cleaning of slots providing oil impregnated insulation paper or minimax, fibre, insulation in slots and well wraping , with cotton tape, bind with cotton thread and varnishing over all with winding varnish with bearing & paiting of complete as aproved by Engineer - in - charge and cleaning of bearing housing and shaft, replacing spares such as condenser, split pins, blade screws etc as required and deposited to MES store after testing complete all as specified and directed. Note - (i) Fans to be collected by the contractor at their own arrangement from AGE E/M store for repair/rewinding and to be deposited at same place after making serviceable duly tested. (ii) Additional spare parts as required to make the serviceable of same will be measured and paid separately as supply only under srl item No. 5 of schedule here in below:-
Description same all as per serial Item No 73 here in above but for Exhaust Fan of Sweep Size 300/380mm , AC ,single phase 230/240 volts complete all as specified and directed.
Description same all as per serial Item No 73 here in above but for Exhaust Fan of Sweep Size 230/250mm , AC ,single phase 230/240 volts complete all as specified and directed.
Description same all as per serial Item No 73 here in above but for Wall Mounted/Padestral Fan of Sweep Size 400/450mm , AC ,single phase 230/240 volts complete all as specified and directed.
S&F in replacement of ceiling fan rod of size 15mm bore in length 2.5' to 10' as per site requirement complete all as specified and directed.
Supply and fixing in replacement of ventilation fans PVC body of size 250 mm sweep including taking down the old unserviceable one and depositing the same in MES yard for further disposal as per existing procedure complete all as specified & directed.
Supply and fixing in replacement of ventilation fans PVC body of size 200 mm sweep including taking down the old unserviceable one and depositing the same in MES yard for further disposal as per existing procedure complete all as specified & directed.
Supply and fixing in replacement of wall fans PVC body of size 450 mm sweep including taking down the old unserviceable one and depositing the same in MES yard for further disposal as per existing procedure complete all as specified & directed.
Supply and fixing in replacement of 36 Watt LED 2'x2', 120 lm/watt (cool day/warm white) Panel Ultra slim recess mounted LED module with high brightness LED package and unique pattern de-glaring PP diffuser and PS LGP de-glaring diffuser sheet for glare free uniform light distribution suitable for armstrong / grid ceiling applications all as directed by Engr-in-Charge. Make: Philips or equivalent as approved by GE
Supply and fixing in replacement of 40 W LED 2'x2' , 120 lm/watt Panel Ultra slim recess mounted LED module with high brightness LED package and unique pattern de-glaring PP diffuser and PS LGP de-glaring diffuser sheet for glare free uniform light distribution suitable for armstrong / grid ceiling applications all as directed by Engr-in-Charge. Make: Philips or equivalent as approved by GE
Supply and fixing of a deep recessed down light for comfort on eye suitable for versetile application such as offices retail 06 watt LED, including driver fixing arrangements & connecting with three core copper cable including taking down old worn out light complete all as directed by Engr-in-Charge Make : Philips /Bajaj/havells or equivalent as approved by GE
Description same all as per serial Item No 83 here in above but 12 watt complete all as specified and directed. Make : Philips /Bajaj/havells or equivalent as approved by GE
Description same all as per serial Item No 83 here in above but 15 watt complete all as specified and directed. Make : Philips /Bajaj/havells or equivalent as approved by GE
S&F in replacement of LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make : Philips /Bajaj/havells or equivalent as approved by GE
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
M&L in replacement of energy saver LED battan fitting 20 watt,120 Lumen /watt, 230 Volts, single tube mounting including with electronic driver LED Printed board, end cover, connector box etc and accessories, prewired, LED including required fixing arrangements and electrical connection two core copper cable from ceiling rose to led light fitting all as directed . Make: Philips/Bajaj/ Havells or equivalent as approved by GE
M&L in replacement of bracket for building security light made out of 40 mm bore GI pipe medium grade not less than 1.2 mtr length bent at 120 degree to shape fixed on pole/wall with and including 50x6mm FI clamps 02 Nos with nut bolts, washers including painting of clamps with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Supply and fixing in replacement of LED street light fitting 35 watt, 120 Lm/watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
M&L in replacement of earthing complete with M.S. galvanized earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below normal GL) with top edge of the earth plate not less than 1.5M below normal GL, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel incl excavation, PCC (1:3:6) type C-1 chamber with RCC cover (1:2:4) type B0, 40 mm thick reinforced with 8 mm dia bar, 3 Nos. both way, 15 mm dia light grade GI protection pipe, funnel with wire mesh,watering pipe of size 20 mm dia med. grade, lugs, main Earthing lead upto 7.5 mtr incl. Charcoal dust, salt etc. all as shown in electrical plate No. 3of SSR Pt-I, 2009 specification.
M&L in replacement of provn of Earthing complete with M.S. galvanized earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below normal GL) with top edge of the plate not less than 1.5M below normal GL, connected to Galvanized earth strip 32x6mm upto 7.5 mtr with protection pipe by means of bolts, nuts, check nuts & washers of GI or steel incl excavation, PCC (1:3:6) type C-1 chamber with RCC cover (1:2:4) type B0, 40 mm thick reinforced with 6 mm dia bar, 3 Nos. both way, 40mm dia light grade GI protection pipe, funnel with wire mesh,watering pipe of size 20 mm dia med. grade, lugs, main Earthing lead upto 7.5 mtr incl. Charcoal dust, salt etc. all as shown in electrical plate No. 5 of SSR Pt-I 2009 specification.
Supply and fixing of GI pipe light grade of size 40 mm bore for laying in trenches/floors or walls including all fittings for fixing complete as required andcomplete all as specified and directed by Engineer-in-Charge.
Supply and fixing of GI pipe light grade of size 15 mm bore for laying in trenches/floors or walls including all fittings for fixing complete as required and complete all as specified and directed by Engineer-in-Charge.
M&L for earth continuity conductor or main earthing lead 4 mm dia GI or steel wire fixed to wall on batten or recessed or buried in ground or drawn in conduit/pipe all as required at site complete all as specified and directed.
Schedule of Credit (MINUS) Rs. 1,09,101.00 B/F from Serial Page No. [Note : Details of items for schedule of credit is given on Srl Page No. ] This amount shall be automatically deducted to arrive at tendered sum
DINESH ELECTRICALS (BID ID -3388211)
Aawadh associates (BID ID -3386622)
NEXT POWER ENTERPRISES (BID ID -3387384)
Raj Contruction (BID ID -3396226)
R.K.ASSOCIATES (BID ID -3387353)
M/S SS Tarders (BID ID -3387697)
PITAMBARI TRADERS (BID ID -3396019)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .