Work of various 11 KV overload feeder sepration/LT Line erection and strengthening of other work.

Amount

Supply of The Line Material as per Relevent ISS :-

Copper L Piece 50x225x10 mm

Holding Clamp

MS T off Channel with Clamp

MS Top Channel

Stone Pad

Dropper Channel

Barbed Wire

11 KV F Clamp

11 KV Cross Arm Clamp

Guarding Channel with Clamp

Nut and Bolts with washer

Suspension Clamp

Dead and Clamp

I Hook

3 Phase Distribution Box with clamp

PRC Connecter

TF Base Angle with Clamp.

LT PVC Cable 3.5x400 sq mm

GI Wire 10 SWG

Alluminium Lug

Alluminium Paint

Red Oxide Paint

Erection Work :-

Safe carriage of line material from store center Etah to pit site in distance range 0 to 60 km including loading & unloading at both ends.

Safe Carriage of 8.5 Mtr Long PCC Pole from Electricty store center Etah/nearest 33/11 KV S/S to direct Pit site in distance range 0 to 60 Kms. Including loading and unloading at both side

Safe Carriage of 11 Mtr Long ST Pole from Electricty store center Etah/nearest 33/11 KV S/S to direct Pit site in distance range 0 to 60 Kms. Including loading and unloading at both side

Safe Carriage of 250 KVA TF from Electricty store center Etah/nearest 33/11 KV S/S to direct Pit site in distance range 0 to 60 Kms. Including loading and unloading at both side.

Erection of 8.5 mtr long PCC Pole as single support including fixing of HT/LT accessories etc complete, pole should be grouted properly as per DVVNL/Respo norms.

Erection of 8.5 mtr long PCC Pole as Double Pole/Section Pole including, drilling, cutting etc and fixing of all HT/LT accessories with TPMO etc complete, pole should be grouted properly as per DVVNL/RESPO norms.

Erection of 11 mtr ST Pole as single support including fixing of all HT/LT accessories etc. complet, pole should be grouted properly as per DVVNL/RESPO norms.

Laying sagging stringing, binding, jumpering & fixing of all accessories etc of following conductor on the newly/old erected pole as per RESPO manual and as per direction of supervising engineer. It includes the cost of labour, T & P, carrier etc required for proper completion of work.

ACSR Weseal Conductor

11 KV XLPE Cable 3x70 sqmm

LT AB Cable 3x95+1x70+1x16 sqmm

LT PVC Cable 3.5x400 sq mm

Stone Pad

Suspention Clamp

Erection and grouting of stays as per RESPO Norms and as per direction of supervising engineer. Grouting material i.e. cement, sand, brick ballast/stone ballast etc. shall be arranged by the contractor at his own cost.

Earthing Complete

3 Phase Distribution Box with clamp

Dead end Clamp

PRC Connector

Copper L Piece

GI Wire 6 SWG

GI Wire 8 SWG

GI Wire 10 SWG

Guarding Channel with Clamp

Construction of 250 KVA new plinth and Installation of 250 KVA T/F on it in proper alignment direction & making HT/LT connection all Cost of labour and T&P which required for completion of work.

Providing and fixing of welded wire mesh fencing around transformer plinth with MS Angle of size 40x40x6 mm length and 1.20 mtrs height. Such panels shall be supported on MS angle from of size 40x40x6 mm having 04 nos corner supports of height 1.65 mtrs including extended legs for grouting which will be used as a door for entry of the personnel or removal/shifting of transformer with welded hinges, sliding belt etc for locking arrangement as per drawing and specifications. The fencing will be painted in the green colour synthetic enamel paint after painting with one coat of red oxide primer. The rates should be inclusive of all materials required for completion of above work. (Length of each fencing approx. 11 mtrs) with T& P labour etc.

Pipe earthing up to water level of 250 KVA medium Power Transformers

Carriage of following old material from pit site to JE store/store center Etah in distance range 0 to 60 km. including loading & unloading and proper stacking.

ACSR Weseal Conductor (Scrap)

Iron scrap material (cross F Clamp channel base angle etc.)

100 KVA TF

ARABH ELECTRICAL (BID ID -4808611)

R.N. ELECTRICAL WORKS (BID ID -4808956)