PERIODICAL SERVICES AND B/R ALLIED JOINERY WORKS AT AKASH VIHAR AT AF STATION SURATGARH

Amount

BOQ (PERIODICAL SERVICES AND B/R ALLIED JOINERY WORKS AT AKASH VIHAR AT AF STATION SURATGARH )

M&L for preparing old distempered plastered or unplastered surfaces of wall by brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of distemper oil emulsion complete all as specified and directed by Engineer-in-charge.

M&L for complete removal through mechanical scraper machine of existing any type of treatment on walls/ceiling and applying 1.00-1.5mm thick wall care putty and rubbing of wall through sand paper to receive smooth finishes and applying two coats of oil bound distemper with painting roller, complete all as specified and directed. Note:- Work will be strictly executed by mechanised means/ tools as required for smart periodical services.

M&L for preparing old distempered plastered or unplastered surfaces of ceiling by brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of distemper oil emulsion, complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old decorated surfaces of walls including brooming down or steel wire brushing scraping down smoke soot, moulds mass and efflorescent salt and trading oil and greasy spots and applying one coat of white wash, complete all as specified and directed.

M&L for preparation of old decorated surfaces of ceiling including brooming down or steel wire brushing scraping down smoke soot, moulds mass and efflorescent salt and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint (First quality) complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint (First quality) complete all as specified and directed by Engineer-in-charge.

M&L for writing letters (rewriting) or figures (Block, roman, Italic or Indian) not exceeding 30 cm height with thick synthetic enamel paint (First quality) complete all as specified and directed by Engineer-in-charge.

M&L for rewriting of stops, commas, short lines, dashes, hyphens, brackets etc by synthetic enamel paint of approved colour, complete all as specified and directed by Engineer-in-Charge.

Taking down cement or cement lime plaster on brick or stone walls including racking out joints/hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.

M&L for rough cast plaster with a mixture consisting of crushed stone or fine gravel aggregate of size 6 to 8mm as directed, mixed with coarse sand and cement in the ratio 1:1:1, finshed even over rendering with under coat of 10mm thick cement and sand mortar 1:4, complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 5mm thick in CM 1:3 on fair faces of brick work or concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth complete finished even & smooth without using extra cement, complete all as specified and directed.

M&L for water proofing layer with Dr. fixit primeseal external wall water proofing as per company instruction, complete all as specified and directed.

M&L for preparation of new surfaces and applying two coats of exterior acrylic emulsion (weather proof treatment), in camouflaging patterns over a coat of primer, complete all as specified and directed.

M&L for preparaion of newly plastered surfaces and applying two coats of distemper oil emulsion on plastered surfaces over one coat of chalk whitening on wall, complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of white wash on plastered surfaces on ceiling surfaces, complete all as specified and directed.

M&L for preparation of old plastered surfaces and applying one coats of exterior acrylic emulsion (weather proof treatment), in camouflaging patterns, like brooming down or steel wire brushing scraping down smoke soot, moulds mass and efflorescent salt and trading oil and greasy spots, complete all as specified and directed.

M&L for preparation of old painted surface of any description and applying one coat of textured paint of any colour and design including over 1-1.5 mm thick wall care putty in any position, complete all as specified and directed.

S&F in repair SS curtain rail, harrison rails, mild steel, chromium plated with fixing brackets, stops roller etc. complete all as specified and directed by Engineer-in-charge.

S&F in repairs bracket heavy duty fixed with screw, complete all as specified and directed.

Taking down door chowkhat or frame including shutter area not exc 1.50 sqm each and removing to store, complete all as specified and directed.

Taking down door chowkhat or frame including shutter area exc 1.50 sqm and not exc 4.00 sqm each and removing to store, complete all as specified and directed.

Taking down door shutter exc 1 sqm and not exc 2 sqm each, complete all as specified and directed.

S&F for 35mm thick factory made plain framed, panelled shutters (two panels) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and directed.

S&F for 35mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a), complete all as specified and directed by Engineer-in-charge.

S&F for pressed steel frames of size 125mmx60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. including filling of PCC 1:2:4 type B-0 in pressed steel door frame, complete all as specified and as directed by the Engineer-in-Charge.

S&F for pressed steel frames for doors with one or more rebates of size 105x60mm including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

S&F In repair of 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels,one face is covered with decorative face veneer with lipping/frame to match, complete all as specified and directed.

S&F mild steel work as in bands, straps, hold fasts etc and like small articles conforming to Fe-290 Gde E-165. complete all as specified and directed.

S&F for solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, in opening as per specification, complete all as specified and directed.

S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification, complete all as specified and directed.

S&F for mild steel butt hinges minimum weight 100mm size. mild steel cold rolled, complete all as specified and directed.

S&F for aluminium handle, cast type, anodiesed of size 125mm & fix to shutter, complete all as specified and directed.

S&F for aluminium anodiesed, barrel tower bolt of extruded section and fix of length 125mm, complete all as specified and directed.

S&F for aluminium handle, cast type, anodised of size 150mm & fix to shutter, complete all as specified and directed.

S&F for aluminium anodised, barrel tower bolt of extruded section and fix of length 150mm, complete all as specified and directed.

S&F for 300mm long aluminium alloy, anodised, sliding door bolt and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium, complete all as specified and directed.

M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F for 25mm thick , block boards, grade 1 quality, exterior grade, decorative type with decorative face veneers on both faces, fixed with screws to timber frame-work, complete all as specified and directed.

S&F for secound class hardwood, plain fillets square rectangular or triangular in section wrought sectional area exc 13 sqcm and not exc 25 sqcm fixed with nails, bullnosed, splayed, chamfered or rounded on one edge or face, complete all as specified and directed.

S&F for hasp and staple, allumuniun anodised, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws, complete all as specified and directed.

S&F for continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps 40mm ( when open), complete all as specified and directed.

S&F 40mm knobs of brass, polished fixed with nut screw & washer bright finished, complete all as specified and directed.

S&F Factory made box type steel window with side hung shutters including projecting type hinges with steel handle, and steel peg stay , complete with glazing bars, dovetailed, complete all as specified and directed.

S&F for factory made box type steel window with side hung shutters including projecting type hinges with steel handle, and steel peg stay , complete without glazing bars, dovetailed, complete all as specified and directed. by Engineer-in-Charge.

S&F fpr factory made box type steel ventilators fixed type, including with one shop coat of primer, complete all as specified and directed.

S&F for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con-forming to Fe 290.Gde-E-165, complete all as specified and directed.

Hacking out old broken glass (any thickness , size , quality or description) from metal frame including punching or drilling out old glazing pins /spring clips, complete all as specified and directed by Engr -in-Charge.

S&F for 4mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane, complete all as specified and directed.

S&F for 4mm thick figured glass, pin headed type and glazing with oil putty in square not exc 0.50 sqn in each pane, complete all as specified and directed.

M&L for framed work as in chowkats for doors or gates of angle or other section with gusset plates, rails, foundation bolt, wiremesh, steel plates, braces etc complete, drilled for fixing of steel sheeting or other covering. door, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering, running rails & guides) and hanging also fastening, complete all as specified and directed by Engineer-in-charge.

S&F in repair stainless steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed .

M&L for preparing new/previously untreated steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer, complete all as specified and directed.

M&L for preparing new wooden surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

Contract Amount shall be derived after affecting the amount of Schedule of Credit in General Summary on serial page No 17 of tender documents.

Gill Construction Co (BID ID -3102711)

MISHRA CONSTRUCTION COMPANY (BID ID -3101221)

M/s Shubham Enterprises (BID ID -3104718)

SHILPI CONSTRUCTION COMPANY (BID ID -3102121)

H S BUILDERS (BID ID -3103324)

M/s JUGAL KISHORE MISHRA AND SONS (BID ID -3098660)

M/S SHRI RAM CONSTRUCTIONS (BID ID -3099915)