Karnataka

AOC

Works

Electrical

Installation of street lights on the main streets of Sindagi city in Sindagi constituency of Vijayapura district.

Public Works Department

PWD Division Office Vijayapura | Vijayapura, Karnataka

Amount: ₹1.6 CrCloses: 23 Feb 2026Closed

Timeline

Published9 Feb 2026
Closed23 Feb 2026
Awarded—

Bids

1 Bid23 Feb 2026

#	Company	Amount	Status
1	CHETANA ELECTRICAL ₹1.6 Craccepted-aoc	₹1.6 Cr	accepted-aoc

Tender Value

₹1.6 Cr

EMD Value

₹2.4 L

Closing Date

23 Feb 2026, 10:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

C S POLICE PATIL

Mobile Number

Work Description

Installation of street lights on the main streets of Sindagi city in Sindagi constituency of Vijayapura district.HOA-4059-80-051-0-60-132 CMIDP FOR THE YEAR 2025-26.

Tender Information

Tender ID

PWD/2025-26/RD/WORK_INDENT32487

Reference Number

PWD/2025-26/RD/WORK_INDENT32487

Tender Type

Open

Product Category

Electrical

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Division Office Vijayapura

Source Website

Subscribe to view

Documents Required

10 documents required · 10 mandatory

Technical Bid

RequiredAnnual Turnover Certificate FROM 2020-21 to 2024-25

RequiredContracotrs KPWD Civil registration Certificate

RequiredWork Done Certificate with Indent Number.

RequiredQuantitywise work done certificate

RequiredGST Registration

RequiredMachineries Documents

RequiredLine of Credit in Prescribed Format

RequiredOngoing Work Details

RequiredAny other related Documents

RequiredUDIN form practicing Chartered Account is preferred

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by any State Government / Government of India /Union Territory.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

Conditional tenders will not be accepted.

As per karnataka state government order LD/300/LET/2006 Bangalore dated 01-01-2007 and Govt letter No.PW/134/BMS /2007/dated 27-07-2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund.

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders.

All the documents to be uploaded shall be neatly scanned and the documents scanned shall be in original.

Any discrepancies observed in the documents uploaded by the tenderer the tender shall liable to rejected.

All the Formats prescribed in the bid documents shall be filled in complete manner. ( section 3 & 4 of the bid document ) and shall be uploaded properly, signed by Tenderer . Necessary Certificates shall be uploaded along with the formats wherever required. General documents Section can be used for this purpose.

Earnest Money Deposit will have to be in any one of the forms as per the instructions in the financial bid document and shall have to be valid for 45 days beyond the validity of the tender.

Tenderers are requested to read the Bid Documents before submission of their bid.

The Tenderer should submit proposed methodology and program of construction, backed with equipment and materials duly supported with broad calculations and quality management, plan, proposed to be adopted, justifying of execution and completion of the work as per technical specifications within the stipulated period of completion.

Department will not supply any materials.

The cost of the Tender form shall not be refundable.

The employer is not responsible for any delay in accessing E-Procurement Portal.

The Employer reserves the rights reject one or all tender without assigning any reasons.

Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, PWD Dept Division Vijayapur during office hours on all working days. It may be noted that if any of the dates mentioned above happened next working day will holds good in lieu of the dates mentioned.

The contractor should employ only registered labours as per Govt. Circular No. PWD/198/BMS/2009/ Dated: 24-06-2009. As per EPF & MP act 1952 irrespect of of the employees Engaged by or through contractors, agencies and contractors shall have provident fund code no. & all the contract employees deployed by them are enrolled as members of provident fund.

The Defect liability period of 1 years,

Contractors should be Registered in KPWD and copy should be uploaded in E-portal Attested by the Gazzeted officers not below the rank of Executive Engineer.

Contractor should prepare Quality Assurance Plan and get approved from Quality Assurance Executive Engineer before starting the work.

Contractor should establish Field Laboratory for testing of Materials.

GST shall be paid to the tendered amount seperately.

The Increase in G.S.T shall not be paid in the extended period of Contract for which the contractor alone is responsible for delay as detarmaind by the authority while granting the extension of time.

Tender invited only for eligible contractors registered under Karnataka Public Works Dept.

Work Completion/Execution Period : 6 Months.

The Earnest Money Deposit Rs. 2,40,500/-shall be paid in full through E-payment or in two parts part (1)Rs.1,00,000/- by E-Payment. Part (2) Balance EMD of Rs. 1,40,500/- in the form of Bank Guarantee issued by Nationalised or Scheduled Bank in favor of Executive Engineer,PWD Vijayapur Division, Vijayapur. And Contractor Should upload the scanned copy of Bank guarantee and the original BG Should be Handed over to the Executive Engineer.

Any deviation/error/mistake found in units of items,they should be read as in the unified SR 2023-24 and the rates shall be quoted accordingly

This Bid Document clause no 34.4 to be implemented as per Delegation of Power vide GO NO.PWD 423 FC-1 2018 Bangalore, Dated:24/09/2018

EMD payments through e-payment made shall be made as one single transaction & payments made in multiple transaction are liable for rejection .

Technical Criteria

Past Experience

c) Executed in any one financial year,the following minimum quantities of work(1)Conical Streetlight Poles/Decorative Streeetlight Poles-155 Nos, 2)LED Streetlights-168 Nos

Others -- Work Done Certificate in format 3 in support of format 4

To qualify for the award of this contract each tenderer in his name should have in the last five years financial years. 2020-21 to 2024-25.(b) satisfactorily completed (at least 90% of the contract value), as prime contractor, at least one similar work such as Construction of Streetlights in median of road work value not less than Rs. 80.02 Lakhs.

Work Done Certificate

Capabilities of Vendor

3.3 Each Tenderer should further demonstrate:Availability by owning, owning/Hire/Lease basis, Govt circular on GO-FD/AE 263/EXP12-2022, dated- 11-05-2022, this clause for owning key equipments for works costing upto Rs. 3.00 crores is exempted. However it is obligatory for the contractor to use the following machineries for various activities involved in constructions as per MORTH specification.1)Excavator/JCB 2)Tippers

Others -- Scanned copy of relevant documents to be furnished. Information in format 8

Asessed Tender capacity shall be more than the tendered amount

Others -- Asessment on the letter head of the tenderer

Financial Status

Maximum of Civil Engineering works executed in any one year during the last five years (updated to 2025-26 price level) taking into account the completed as well as works in progress. (Financial turnover of previous years shall be given a weight of 10% per year to bring them to the price level of the 2025-26)

Others -- Information on the Letter Head of the tenderer

Value at 2025-26 price level, of existing commitments and on-going works to be executed during the next 6 months(Financial commitment of previous years shall be given a weight of 10% per year to bring them to the price level of the 2025-26), (Morthwise commitment shall be furnished).

Others -- Statement on the Letter head of the tenderer

Latest income tax certificate

Others -- Scanned copy of ITC certificate

The Earnest Money Deposit Rs. 2,40,500/- shall be paid in full through E-payment or in two parts part (1)Rs.1,00,000/- by E-Payment. Part (2) Balance EMD of Rs.1,40,500/- in the form of Bank Guarantee issued by Nationalised or Scheduled Bank in favor of Executive Engineer,PWD Vijayapur Division, Vijayapur. And Contractor Should upload the scanned copy of Bank guarantee and the original BG Should be Handed over to the Executive Engineer.

Others -- Scanned copy of FDR /Pledged small saving instrument / BG

Each Tenderer should further demonstrate:(b) liquid assets /or availability of credit facilities of not less than Rs.80.02 Lakhs (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc.as per 1.10 Section 3 Qualification Information.

Others -- Letter of Credit/Bankers Certifate from Scheduled Bank or Nationalized Bank

To qualify for the award of this contract each tenderer in his name should have in the last five year financial years. 2020-21 to 2024-25(a) achieved in atleast two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.320.10 Lakhs.

Others -- Certificate from Chartered Accountant yearwise from 2020-21 to 2024-25. Information in format 1

Others

Information on works for which tender acceptance letters are received.

Others -- Information in format 6 letter of acceptance

Name, Address, Telephone No, Fax No, E-mail ID of the tenderers bankers.

Others -- Information on the letter head of the tenderer.

The proposed methodology and program of construction, backed with equipment planning and deployment, duly supported with broad calculations and quality control procedures proposed to be adopted, justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion.

Others -- CPM/PERT Chart

Constitutional or legal status of the tenderer

Others -- Copy of registration document

Information on works are yet to be completed.

Others -- Information in format 5 certificates in format 3

Information on litigation in which the Tenderer is involved.

Others -- Information in format 10

Fee & Financial Details

Tender Fee Amount

₹4,010

EMD Fee Amount

₹2.4 L

Important Dates

Last Activity

23 Feb 2026

Published

9 Feb 2026

Bid Opening

24 Feb 2026

Download Ends

20 Feb 2026

Pre-Bid Meeting

17 Feb 2026

BOQ Preview

•

Ist Month

•

Physical

•

For Road

•

8 mtr Conical Street Light Pole Hot Dip Galvanised With Paint Bottom Dia: 160mm, Тор - 70mm Wall THK-3mm Base Plate : 250mm x 250mm x 12mm Jbolts & Templates : M20 x 750mm L x 4Nos With Nuts & Washer With Decorative Single arm Bracket 48 Dia x 1mtr

•

Decorative light single poles: Fabricating, Supplying and Errection of 10 Mtrs long hot dip galvanized conical pole with BSEN 10025 grade 5 355 JO Steel plate for shaft IS 2052 for base plate with door opening arrangements including suitable boards, Bakelight sheet for MCB's as per IS Specification suitable to withstand the wind speed of 47 M/S for 10 Mtr pole in single section and single joint welded as per IS 9595/Is 1017 BAWS having stone bottom 200 mm top 70 mm with 3 mm thick the pole should be painted asthetically using good quality autocoat paint the side pole should be 3 Mtr Height 165 mm Dia, 3 mm Thick having 1 Mtr perforation from 1.5 Mtr to 2.5 Mtr Height. The polycarbonate pipe housed inside the perforation along with changing LED Tube visible from all sides. The Foundation plate should be suitable aluminium head placed at top including PC cover having 7W LED Bulb inside suitable base plate 4 Nos 24 Long J-Bolts along with template and The Pole shall be hot dip galvanized dipping with not less than 65 micron as per ASTM A123 and 153 etc

•

Decorative Median light poles fabricating supplying and erection of 10 Mtrs long hot dip Galvanized Conical pole with BSEN 10025 grade S 355 JO steel plate for shft IS 2062 for base plate with door opening arrangements, including suitable boards, bakelite sheet and MCB'S as per IS specifications suitable to withstand the wind speed of 47m/ sec for Mtrs pole in double / Single section and single joint welded as per IS 9595/IS10178AWS having two nos of 11-12 mtr length pole with dimensions bottom 190mm, top 60 mm with 3mm thick The pole should be painted aesthetically using good quality Dupont paint. The centre pole having dimensions of 165 mm OD 3.00 mtr langth 2.4mm thick with perforation for the length of 1000mm inserted with color changing LED tube inside should he painted with good quality Dupont paint and stainless steel ball should be painted with good quality Dupoint paint and stainless steel ball should be placed on top Suitable base plate and 6 Nos of m-24 long J Bolts along with template and the pole shall be hot lip galvanized in single dipping with not less than 65 micron as per ASTM-A 123 and 153 etc., The pole height may be varied at bridge section. The pole should be as shown in attached picture ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge of work.

•

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT > 5500K, IP-66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC-60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency>130lm/w, nominal CRI >75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/Lumileds/Osram make LED Source - LED Streetlight 150 W

•

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires.

•

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 - 4 core 16 sqmm

•

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:2010 - 3C X 2.5 Sq.mm

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.The following additional tests are compulsory either to be conducted at works or independent lab with witness by inspecting authority.Additional Tests for FRLS-Applicable Standard Oxygen Index -IS 694-1990, Clause 16.8 Temperature Index -IS 694-1990, Clause 16.13 Smoke Density -IS 694-1990, Clause 16.14 Test for Halogen Acid Gas evaluation -IS 694-1990, Clause 16.12 - 6 sqmm

•

Laying of Cable in Existing Trench/GI Pipe/Stone Ware/RCC Hume pipe Using Wooden/Aluminium Rollers as Directed by the Department Staff - LT Cable - 2.5 to 25 Sqmm

•

Aluminium End Terminal (Lug) - 16 sqmm

•

Aluminium End Terminal (Lug) - 25 sqmm

•

Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia

•

Guy Wire and GI wire - 8 SWG GI Wire ( 4.064 mm Dia ) Std Wt : 131KG/KM

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.- Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. for foundation

•

Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. - 14SWG

•

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. - 50x50x6mm

•

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 -50-63Amps TPN

•

Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. - 100Amps 4x30x6mm Aluminium Strips

•

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947, 65 A

•

Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers.

•

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. - 32Amps

•

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy

•

Month wise

•

1 Month

•

2 Month

•

3 Month

•

4 Month

•

5 Month

•

6 Month

•

Total

•

FORMAT 10

•

Information on litigation in which the Tenderer is involved:

•

Other Party/Parties

•

TENDERER

•

FORMAT 9

•

BANKER’S CERTIFICATE

•

This is to certify that M/s. ………………………….. is a reputed company with a good financial standing. If the contract for this work, namely ……………………………… (Name of the work) is awarded to the above firm, we shall be able to provide overdraft/credit facilities to the extent of Rs. …………… to meet the working capital requirements for executing the above contract

•

Name of the Bank, Senior Bank Manger

•

Address:…………………………

•

FORMAT 8

•

List of Machinery

•

Item of Equipment

•

TENDERER

•

FORMAT 7

•

Information of the works for which Tenderer has submitted Tender.

•

Project Name

•

TENDERER

•

FORMAT 6

•

Information of the works for which Tender acceptance letters are received.

•

Project Name

•

Attach letters of Acceptance received.

•

TENDERER

•

FORMAT 5

•

Information on works which are yet to be completed.

•

Project Name

•

Attach Certificate for each work indicated above, in Format 3, obtained from the Competent Authority

•

TENDERER

•

FORMAT 4

•

Monthly Physical and Financial Progress Achieved in all Contracts which are referred to in Format 3

•

Names of Works

•

January

•

Earthwork & Embankment in cum

•

Financial

•

GSB in cum

•

Financial

•

Base Course (WMM/WBM) in cum

•

Financial

•

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum

•

Financial

•

Others Specify Details

•

Financial

•

Earthwork & Embankment in cum

•

Financial

•

GSB in cum

•

Financial

•

Base Course (WMM/WBM) in cum

•

Financial

•

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum

•

Financial

•

Others Specify Details

•

Financial

•

Earthwork & Embankment in cum

•

Financial

•

GSB in cum

•

Financial

•

Base Course (WMM/WBM) in cum

•

Financial

•

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum

•

Financial

•

Others Specify Details

•

Financial

•

Earthwork & Embankment in cum

•

Financial

•

GSB in cum

•

Financial

•

Base Course (WMM/WBM) in cum

•

Financial

•

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum

•

Financial

•

Financial

•

Others Specify Details

•

Financial

•

Earthwork & Embankment in cum

•

Financial

•

GSB in cum

•

Financial

•

Base Course (WMM/WBM) in cum

•

Financial

•

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum

•

Financial

•

Others Specify Details

•

Financial

•

Earthwork & Embankment in cum

•

Financial

•

GSB in cum

•

Financial

•

Base Course (WMM/WBM) in cum

•

Financial

•

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum

•

Financial

•

Others Specify Details

•

Financial

•

TENDERER

•

FORMAT 3

•

FORMAT FOR WORK DONE CERTIFICATE TO BE OBTAINED FROM COMPETENT AUTHORITY

•

This is to certify that M/s .Sri/Smt .............................................................................

•

has executed/ is executing(strike off which ever is not applicable) the work of .............................................

•

in this Organisation. The details of the work is as under:

•

Name of the Project

•

Name of the Work

•

Contract Amount

•

Date of signing the Agreement

•

Date of handing over of the Site

•

Progress *

•

January

•

Earthwork & Embankment

•

Financial in lac

•

Financial in lac

•

Base Course (WMM/WBM)

•

Financial in lac

•

Asphalt Quantities (MSS/BM/BC/SDBC/DBM)

•

Financial in lac

•

Concrete

•

Financial in lac

•

Steel

•

Financial in lac

•

Others (Pl specify)

•

Financial in lac

•

Others (Pl specify)

•

Financial in lac

•

Progress *

•

January

•

Earthwork & Embankment

•

Financial in lac

•

Financial in lac

•

Base Course (WMM/WBM)

•

Financial in lac

•

Asphalt Quantities (MSS/BM/BC/SDBC/DBM)

•

Financial in lac

•

Concrete

•

Financial in lac

•

Steel

•

Financial in lac

•

Others (Pl specify)

•

Financial in lac

•

Others (Pl specify)

•

Financial in lac

•

Progress *

•

January

•

Earthwork & Embankment

•

Financial in lac

•

Financial in lac

•

Base Course (WMM/WBM)

•

Financial in lac

•

Asphalt Quantities (MSS/BM/BC/SDBC/DBM)

•

Financial in lac

•

Concrete

•

Financial in lac

•

Steel

•

Financial in lac

•

Others (Pl specify)

•

Financial in lac

•

Others (Pl specify)

•

Financial in lac

•

Progress *

•

January

•

Earthwork & Embankment

•

Financial in lac

•

Financial in lac

•

Base Course (WMM/WBM)

•

Financial in lac

•

Asphalt Quantities (MSS/BM/BC/SDBC/DBM)

•

Financial in lac

•

Concrete

•

Financial in lac

•

Steel

•

Financial in lac

•

Others (Pl specify)

•

Financial in lac

•

Others (Pl specify)

•

Financial in lac

•

Progress *

•

January

•

Earthwork & Embankment

•

Financial in lac

•

Financial in lac

•

Base Course (WMM/WBM)

•

Financial in lac

•

Asphalt Quantities (MSS/BM/BC/SDBC/DBM)

•

Financial in lac

•

Concrete

•

Financial in lac

•

Steel

•

Financial in lac

•

Others (Pl specify)

•

Financial in lac

•

Others (Pl specify)

•

Financial in lac

•

Progress *

•

January

•

Earthwork & Embankment

•

Financial in lac

•

Financial in lac

•

Base Course (WMM/WBM)

•

Financial in lac

•

Asphalt Quantities (MSS/BM/BC/SDBC/DBM)

•

Financial in lac

•

Concrete

•

Financial in lac

•

Steel

•

Financial in lac

•

Others (Pl specify)

•

Financial in lac

•

Others (Pl specify)

•

Financial in lac

•

Stipulated Period of Completion (including monsoon)

•

Prescribed Date of completion

•

Actual Date of Completion/ Probable Date of Completion

•

Cost of balance work (if work is in progress)

•

Reasons if any for delay in completion, if work completion is delayed

•

Penalty if any imposed

•

Any other information

•

* Monthwise progress shall be furnished seperately.

•

Place:

•

Address for correspondence:

•

Email ID:

•

FORMAT 2

•

Work executed as prime contractor (in the same name) on works of similar nature during the five years specified)

•

Project Name

•

Attach Workdone Certificate for each work indicated above, in Format 3, obtained from the Competent Authority

•

CONTRACTOR

•

FORMAT 1

•

Financial Year

•

Billed upto date during 2024-25

•

Attach Chartered Accountant's Yearwise Statements.

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

BID DOCUMENT 32487.doc

Tender Document • 1.15 MB

Specifications Roads.zip

Others - Road Specifications • 1.19 MB

mile stone 32487.xls

Others - Milestone • 0.06 MB

formats kw4 roads.xls

Others - Road Formats • 0.13 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

CHETANA ELECTRICAL

₹1.6 Craccepted-aoc