GE863/EWS-T-29 OF 2023-24

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete, all as specified and directed.

Dismantling of wrought iron or mild steel work any description and fixed in any position, complete, all as specified and directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards / slabs / blankets, any thickness including cover fillet, complete, all as specified and directed. .

Dismantling of timber scantling 40 Sqcm and over in section, in any position as in framed work or Framed work, complete, all as specified and directed.

Dismantling timber scantling under 40 sq.cm in section, in any positions as in framed work but in fillets, rails, posts, rafters, purlins, etc, complete, all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles, complete, all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete, all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete, all as specified and directed.

Demolition of Reinforced Cement Concrete in any position and any description including cutting of reinforcement bars to facilitate demolition, complete, all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc, complete, all as specified and directed.

Taking down chowkats or frames not exc 1.5 sq.m each but with shutters (without taking off shutters from the frames), remove to store, complete, all as specified and directed.

Taking down chowkats or frames exc 1.5 sq.m but n.exc 4 sq.m each but with shutters (without taking off shutters from the frames),remove to store, complete, all as specified and directed.

S&F Mild steel roof trusses (framed), Trussesd, purlins, crane grantries, rails and framings and heavy bracket framing (Beam,tee, angle, channel or flat sections) confrming to Fe 410-W including cleats,distance pieces etc, complete, all as specified and directed.

M & L for preparation of new or previously untreated surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete, all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete, all as specified and directed.

M & L for second class hardwood clean sawn scantlings as in timber framed and fixed, complete, all as specified and directed.

M & L for 6mm thick (No of ply 5) plywood, grade BWR, type BB, fixed with nails to timber frame work as in ceiling, complete, all as specified and directed.

M & L for second class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area exc 3 Sqcm but n.exc 6 Sqcm, complete, all as specified and directed.

M & L for second class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area exc 13 Sqcm but n.exc 25 Sqcm, complete, all as specified and directed.

M &L for Pre-cast cement concrete type C1 (1:3:6) using 20mm well graded stone aggregate as in block masonry with solid blocks, exc 10cm in width and setting in cement mortar (1:6), complete, all as specified and directed.

M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6), complete, all as specified and directed.

M & L for providing precast cement concrete type C1 (1:3:6) using 20mm well graded stone aggregate and set in cement mortar (1:6) as in bond stone complete all as specified and directed.

M & L for providing Plain cement concrete type C1 (1:3:6) using 20mm well graded stone aggregate as in coping, complete, all as specified and directed.

M&L coloured Glazed ceramic tiles in vertical surfaces 350 x 250 x7 mm/ 450 x 350 x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over & including rendering 10mm thick in cement mortar 1:4 on stone masonry surfaces or surfaces other than fair face of brick work to receive glazed tiles/granite, complete, all as specified and directed.

M & L for machine cut kota stone slab flooring 18-20mm thick over and including 20mm thick screed bed in cement mortar 1:3, laid and jointed with grey cement sluury mixed with pigment to match the shade of the slab including rubbing and polishing, complete, all as specified and directed.

M & L for machine cut Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over 10 mm thick screed bed of cement mortar 1:4, laid and jointed with grey cement sluury mixed with pigment to match the shade of the slab including rubbing and polishing, complete, all as specified and directed.

M & L for coloured chequered cement concrete tiles of size 20 cm x 20 cm x 25 mm/30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry over and including 20mm thick screed bed in cement mortar 1:4 as in floors with grey cement and pigment, complete, all as specified and directed.

M & L for provding Plain cement concrete type C1 (1:3:6) using 20mm well graded stone aggregate as in roof kerb or mud stops, round on edges, complete, all as specified and directed.

M &L for 75 mm thick, plain cement concrete 1:3:6, type C-2, using 40 mm graded mechanically crushed stone aggregates, laid in 1:20 slope as in plinth protection including making joints at 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/ 25 & two parts heated sand (by volume), surface finished even and fair without using extra cement, complete, all as specified and directed. Note: The concrete shall be laid at a stretch not exceeding 3 metre in length and width of joint shall not be more than 12 mm.

M & L for RCC (1:2:4) type B-1 Using 20 mm well graded stone aggregate as in chajjas, complete, all as specified and directed

M & L for RCC (1:2:4) type B-1 using 20 mm well graded stone aggregate as in Beams , cantilevers, bressummers, lintels etc, complete, all as specified and directed

M & L for use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges in rough finished flat surface of concrete, complete, all as specified and directed.

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, bands, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete, complete, all as specified and directed.

S & F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete, all as specified and directed.

M & L for Mild steel TMT bars 6 to 8 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete, all as specified and directed.

M & L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement plaster (1:4) using Water Proofing Compound @ 3% by weight of cement (WPC to be measured and paid separately) and finished even and smooth (without using extra cement), complete, all as specified and directed.

M & L for rendering 10mm thick on fair faces of brick or concrete surfaces in cement plaster 1:6 and finished even and smooth (without using extra cement), complete, all as specified and directed.

M & L for Raised pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar 1:4, complete, all as specified and directed.

Supply only integral water proofing compound of approved brand/make, complete, all as specified and directed.

S & F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete, all as specified and directed.

S & F second class hardwood 35 mm thick plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers and fitted to chowkats, complete, all as specified and directed.

S & F of Second class hardwood 35 mm thick (Batten thickness) glazed/gauzed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with plain, chamfered or rounded, mitered and rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule part – I (Specifications - 2009) complete all as specified and directed.

S&F of Second class hardwood 30 mm thick (Batten thickness) glazed/gauzed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with plain, chamfered or rounded, mitered and rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule part – I (Specifications - 2009), complete, all as specified and directed.

S&F clamps, hold fast, hook washer & similar small articles conforming to Fe-290 Gde-E-165, complete, all as specified and directed.

M & L for providing Plain cement concrete type C1 (1:3:6) using 20mm well graded stone aggregate as in hold fast blocks, complete all as specified and directed.

S & F 125 mm butt hinges, medium weight, cold rolled mild steel and fixed, complete, all as specified and directed.

S & F 75 mm butt hinges, medium weight, cold rolled mild steel and fixed, complete, all as specified and directed.

S & F 300 mm length aluminium alloy, anodised, sliding door bolt hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete, all as specified and directed.

S & F 150 mm Aluminium handles, cast type, anodised of extruded section, complete, all as specified and directed

S & F 100 mm Aluminium handles, cast type, anodised of extruded section, complete, all as specified and directed

S & F 150 mm aluminium, anodised, barrel tower bolts of extruded section etc, complete, all as specified and directed.

S & F 125 mm aluminium, anodised, barrel tower bolts of extruded section etc, complete, all as specified and directed.

S&F Mild steel 300 mm ordinary rat tail rod pattern springs, including roller and roller plate, complete, all as specified and directed..

M & L sheet glass, 4 mm thick ordinary quality and glazing with oil putty or beadings in square n.exc 0.5 sqm in each pane, complete, all as specified and directed.

S&F Galvanised Mild Steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, complete, all as specified and directed.

M & L for Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint as in treating ends of posts, backs of chowkats, etc., area tarred exc 0.1 sq. m but n exc 0.5 sq. m each, complete, all as specified and directed.

M & L for Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint as in treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area n.exc 0.1 sq. m each, complete, all as specified and directed.

S & F Small fittings such as brackets of any type, shaped door and window stops and the like, including all necessary labours, articles n. exc 200 cu. cm each of Second class hard wood, complete, all as specified and directed.

M & L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over a coat of chalk whiting as a preparatory to distempering, complete, all as specified and directed.

M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of alkali resistant primer, complete, all as specified and directed.

M & L for preparation of wood and wood based materials, new or old surface of any description and girth not otherwise described and treated with two coats of creosote oil, complete, all as specified and directed.

M & L for preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer, complete, all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality), complete, all as specified and directed .

M & L for 75 mm thick Plain Cement concrete type C2, (1:3:6) using 40 mm well graded stone aggregate as in sub base of flooring/ hard standing /footpath, complete, all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B0 using 12.50mm well graded stone aggregate as in floor, including rough finished without using extra cement, complete, all as specified and directed.

S&F in repair 20 mm dia. Aluminium alloy anodised curtain rails with brackets fixed, complete, all as specified and directed

Taking down carefully copper/aluminium point wiring from existing points (light, fan, socket or power) alongwith compete fittings such as switches ,ceiling rose, pendent holder, sketch fitting & regulator etc. including making good to the disturbed surfaces of wall, roof and floor etc. to match with the existing surfaces, complete, all as specified and directed.

Taking down unserviceable submain wiring and service cable alongwith batten /PVC conduits etc. and making good disturbed surfaces of walls/floors and match the existing surface, complete, all as specified and directed.

Supply and fixing 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cable flat or circular of size 6 Sqmm complete all as per specified and directed.

M&L for point wiring using approved colour coding as per IS with using approved colour coding as per IS 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continuous earthing in & incl PVC Casing and caping with accessories having ISI mark fixed on wall surfaces / ceiling including provision PCV Box on top for fixing switches sockets etc. all as specified for one light point/ fan /Bell point controlled by one switch, complete, all as specified and directed.

All as per Srl item No 71 here-in-before but controlled with one 3 pin socket outlet 5 Amp on same board with other switches with cables 1.5 Sqmm, complete, all as per specified and directed.

All as per Srl item No 71 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the independent board with other switches with cables 1.5 Sqmm, complete, all as per specified and directed.

All as per Srl item No 71 here-in-before but controlled with one 3 pin socket outlet 15 Amp, independent board with cable 2.5 sqmm including provision of 1.5 sqmm single core multistanded PCV insulated copper conductor as earth conducting conductor, complete, all as per specified and directed.

Supply and fixing of switch piano type ,15 Amp, 230 Volt, flush button, single pole, one way, complete, all as specified and directed.

Supply and fixing of socket outlet multipin, 15 Amps, 2-in-one 230 Volt flush type, complete, all as specified and directed.

Supply and fixing of socket outlet multipin, 5 Amps, 2-in-one, 230 Volt, flush type, complete, all as specified and directed.

Supply and fixing of switch piano type, 5 Amp, 230 Volt, flush button, single pole, one way, complete, all as specified and directed.

M&L Ceiling rose, 3 terminal with ISI mar complete, all as specified and directed.

Supply and fixing in replacement surface & wall mounted LED 20W tube light fitting 4 feet with high quality material and design, extruded aluminium housing enhances safety. High quality PC diffuser, reliable and robust housing structure, maximize the endurance over the life time slim integrated design, easy to install efficacy 125 limen/ watt all accessories, complete, all as specified and directed. Make: Crompton Cat No. CCS-100-20-65-HL2-DP-NWH or equivalent of Wipro/Philips/Havells/Bajaj

S&F lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings. Make : Anchor/leader/havells

Supply and fixing in replacement LED lamp 9W energy saving upto 80%, BEE rated with all accessories, complete, all, as specified and directed. Make:Cromptom part No-LED 9DFCDL-PRO-BO/ LED 9W-B22/E27-CDL/WW or equivalent in Philips/wipro/Havells/Bajaj.

Supply & Fixing in replacement of bulk head light with 10 W LED Lamp, complete, all as specified and directed.. Make Crompton Cat No LBHP-10-CDL or equivalent in Philips/wipro/Havells/Bajaj.

Supply and fixing of MCBs Distribution board , sheet metal enclosure, SPN 240 Volts , 08 ways with 200 amps rated bus bar , double door for MCBs, ,with IP 43 protection ,complete all as specified and directed.

S&F in replacement of MCBs, SPN, 40 Amp,10 KA, complete, all as specified and directed.

S&F in replacement of MCBs, SP, 6 Amp to 32 Amp, 10 KA, complete, all as specified and directed.

M & L for Earthing complete with galvanised steel earth plate electrode 600x600x6.0mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire of 4.0 mm dia earth continuity coductor by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR-I 2009, connected to main switch board all as specified and including testing on completion. Including necessary excavation, earthwork, PCC works and CI earth pit cover with watering pipe 20 mm dia GI Pipe medium grade, funnel with wire mesh and lugs GI Pipe of 15 mm dia of light grade for protection of earth wire, complete, all as specified and directed.

Note:- The total shall subject to adjustment of credit of Rs 31992.00 for old Materials as per Schedule of Credit.

M/S SANTOSH KUMAR

Kusan Enterprises