Loading
Loading…
Loading…
Tender Value
₹1.4 Cr
EMD Value
₹2.8 L
Closing Date
14 Sept 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TRD
15 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where: V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared / audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-15 (Annexure-VIB), along with copies of Audited Balance Sheets duly certified by the Chartered Accountant / Certificate from Chartered Accountant duly supported by Audited Balance Sheet. ( Click here to download Format)
The tenderers must submit the copy of valid Electrical License along with their offer. Offer shall rejected be summarily, if tenderer does not have valid Electrical License on the name of an individual / Proprietor / Partner / firm issued by the State / Central government.
The tenderer must have successfully completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender.Tenderers shall submit requisite information on standard format for Completion / Performance Certificate as per Annexure-18 in support of 30% or 40% or 60% Similar Nature of work. ( Click here to download Format)
Definition of Similar Work: "Design, supply, erection testing & commissioning of 50Hz, single phase 25KV AC OHE". (Ref: OHE Works S.No. 1.1 of Pr. CEE/NR's Letter No. 181-Elect/ TRD/189/Pt. II, dated 29.07.2021)
32 conditions · 3 needing a document upload
Bid Security: Tenderer (s) may please note that offers received without Bid Security either in cash through e-payment gateway or as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents (as per Annexure- 21) valid for a period of 90 days beyond the bid validity period, will be considered as incomplete & invalid offer and for which contractor shall have no claim on Railway. ( Click here to download Format)
Following documents shall be submitted by Tenderer in support of Constitution of Firm: (A)SOLE PROPRIETOR SHIP FIRM: (i)Undertaking that he is not blacklisted/debarred by Rlys/other Ministry/Deptt of Govt of India from participation in tender on date of bid opening, either in individual capacity or as a member of partnership firm or JV in which he was/is a partner/member. Concealment/wrong information in regard to above shall make contract liable for determination under Clause62 of GCC. (B)HUF: a. Copy of notarized affidavit on Stamp Paper declaring that he who is submitting tender on behalf of HUF is in position of Karta of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. b. Undertaking that HUF is not blacklisted or debarred by Rlys/any other Ministry/Deptt of Govt of India, either in individual capacity or as a member of partnership firm or JV in which HUF was/is a partner/member. (C)PARTNERSHIP FIRM: (i)Notarized copy of partnership deed. (ii)Notarized or registered copy of Power of Attorney in favor of the individual to tender for the work, sign agreement etc and create liability against firm. (iii)Undertaking by all partners of partnership firm that they are not black listed/debarred by Rlys/any other Ministry/Deptt of Govt of India from participation in tenders/contracts as on date of bid opening, either in their individual capacity or in any firm in which they were/are partners. (iv)All details of Firm must be provided in Annexure-10. (v)Complete details as per Annexure- 17B. (D)JOINT VENTURE (JV): APPLICABLE ONLY FOR WORKS COSTING > Rs.10 Cr (Not applicable for this tender). (E)Company registered under Companies Act-2013: Tenderer must submit/upload tender along with following documents: (i)Copies of MOA (Memorandum of Association)/AOA (Articles of Association). (ii)Copy of Certificate of Incorporation (iii)Copy of Authorization/Power of Attorney issued by Company (backed by Resolution of Board of Directors) in favor of the individual to sign tender on behalf of company and create liability against Company. (iv)Undertaking that Company is not blacklisted/debarred by Rlys/any other Ministry/Deptt of Govt of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of partnership firm or JV in which Company was/is a partner/member. (F)LLP (Limited Liability Partnership) Firm under LLP Act-2008: Tenderer shall submit along with tender: (i)Copy of LLP Agreement (ii)Copy of Certificate of Incorporation (iii)Copy of Power of Attorney/Authorization issued by LLP in favor of individual to sign tender on behalf of LLP and create liability against LLP. (iv)Undertaking that LLP is not blacklisted/debarred by Rlys/any other Ministry/Deptt of Govt of India from participation in tender on the date of bid opening, either in individual capacity or as a member of JV in which LLP was/is a member. (G)Registered Society & Registered Trust: Tenderer shall submit: (i)Copy of Certificate of Registration. (ii)copy of Deed of Formation. (iii)Copy of Power of Attorney in favor of individual to sign tender documents and create liability against Society/Trust. (iv)copy of Rules & Regulations of Society. Note: Offers received without proper Power of Attorney shall be considered in-completed and rejected summarily.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer shall study the Indian Railway General Conditions of Contract Regulations for Tenders & Contracts (GCC)- April'2022 or latest along with tender documents before submission of the tender.
The tenderer shall submit all the requisite documents alongwith tender offer. Tender offer without these documents shall not be considered. "No post tender correspondence for submission of additional documents shall be entertained after opening of the Technical & Commercial offers. Even suo-moto post tender letters of the tenders shall be treated as NULL & Void".To assist in the examination, evaluation and comparison of offers received, the Railway may at their discretion, ask any Tenderer for clarification on attached document with their Tender. The request for clarification and the response shall be in writing or by FAX but no change in the price or substance of the Tender shall be sought, offered or permitted. In case no credentials enclosed or statement to that effect is mentioned, the identity of working contractor of division shall be taken as fresh.
Period of Completion : The entire work is required to be completed in all respect within specified period from the date of issue of the letter of acceptance. The contractor shall maintained steady and regular progress to the satisfaction of the Sr.DEE/TRD/FZR or his authorized representative and to ensure that the work will be completed in all respect within the stipulated time, failing which action may be taken by the Railway Administration in terms of clause 17 and clause 62 of the General Conditions of contract (GCC)- April'2022 or latest.
Non-compliance with any of the conditions set forth therein above is liable to result in the tender being rejected. NOTE: (i) Copy of GCC of April'2022 is uploaded with NIT as ready reference of Tenderers. (ii) The offers received without proper Power of Attorney shall be considered in-completed and rejected summarily.
The rates quoted by the bidder are to be inclusive of all charges and all taxes levied by the Union of India, State Government and Local Bodies etc., from time to time including Surcharge except GST. However, GST @ 18% shall be paid extra as per Schedule- 04 on all items of Schedule-01, 02 & 03.
Night working : Though normally no work is carried out in night i.e., from sun set to sun rise the progress of the work if not coming up to the time schedule laid down in clause above the Engineer-in-charge can order for night working by the contractor and the contractor shall make all arrangements for adequate lighting and safety precautions etc., for night working.
Contractors will have to upload details of their LOAs, engaged workmen, wage payment details, PF/ESI details, bonus details etc, on website www.shramikkalyan.indianrailways.gov.in on monthly basis. (Railway Board's letter No. 2018/CE-I/CT/4 dated 17.10.2018)
Guarantee : The tenderer shall guarantee the equipments/installations for satisfactory performance for a period of 12 months or mentioned in special condition / technical specifications or as mentioned by the manufacturer, which ever in higher from the date of commissioning against any defect. The contractor should promptly attend complaint and replace/repair the defective equipments/parts free of cost promptly and satisfactorily. The equipments/parts so replaced by the contractor, shall be further guaranteed for a period of 12 months or mentioned in special condition / technical specifications or as mentioned by the manufacturer for satisfactory service from the date of such replacement.
The tenderers shall keep their offer open for 60 days (Sixty days).
The Performance Guarantee (PG) shall be released after physical completion of the work based on 'Completion Certificate' issued by the competent authority stating that the contractor has complete the work in all respects satisfactorily. The Security Deposit shall also be released based on 'Completion Certificate' issued by Consignee / Engineer In- charge of the work to the contractor, submission of authentic documents that firm has paid GST as applicable by the extant rule and on completion of guarantee / warrantee period of ONE Year or as stipulated in Tender Documents.
Ambiguous and incomplete (i.e. not filling the rates or controversial rates and not attaching all the required documents) offer may be summarily rejected.
Any typographical error shall not be construed to be benefit of the contractor; in such cases the interpretation and decision of Sr. DEE/TRD/FZR shall be final and binding upon the tenderer.
Contractors are allowed to make payments against this tender towards tender document cost and earnest money only through only payment modes available ON IREPS portal LIKE net banking, debit card, credit card etc Manual payments through Demand draft, Banker cheque, Deposit receipts, FDR etc are not allowed.
For verification of documents tenderer has to submit the details of issuing authority and organization like-Postal address, Name, Designation, Office phone number, Mobile no. and email ID of concerned person.
TRD work against various Engg Works over Firozpur division in c/w (i)- Elimination of manned L-xing no. S-63 at Km 433/27-28 by providing Limited Height Subway of internal size 5M X 5M on JUC-BES section (Between JUC-SRX) by pushing method in the section under ADEN/JUC (ii)- Provision of 3.00m wide covered light weight ROB near LC No. S-3 on LDH-DUI section under ADEN/LDH, (iii)- Construction of 5m X 3.5m LHS in lieu of closed Level crossing No. C-7 on JUC-NRO section by pushing method under ADEN/JUC, (iv)- Construction of 3.00m Wide Covered FOB with Ramp for pedestrian at KM 366/16-18 on SNL-ASR Section and (v)- Replacement of existing steel girder bridges with PSC slab having Span upto 12.20m & 3.66m of various bridges in the jurisdiction of ADEN-II/FZR.
804R1-TRD-FZR-2026-27~NR
804R1-TRD-FZR-2026-27
Open
Works - General
12 Months
Firozpur, Punjab
₹0
₹2.8 L
20 Aug 2026
20 Aug 2026
31 Aug 2026
265 items across 4 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,08,45,094.08 | ||
| — | 255.00 | — | — | ||
| Supply of Concrete for foundation and plinth in other than hard & rocky soil | — | — | — | 17,18,582.7 | |
| — | 245.00 | — | — | ||
| Erection of Concrete for foundation and plinth in other than hard & rocky soil | — | — | — | 4,04,972.75 | |
| — | 10.00 | — | — | ||
| Erection of Concrete for foundation and plinth in hard & rocky soil | — | — | — | 64,682 | |
| — | 25.90 | — | — | ||
| Supply of galvanized steel fabricated masts / other supporting structure | — | — | — | 34,48,327.29 | |
| — | 25.90 | — | — | ||
| Erection of galvanized steel fabricated masts / other supporting structure | — | — | — | 2,54,906.76 | |
| — | 2.65 | — | — | ||
| Supply of fabricated and galvanized steel work (SPS) other than mast with necessary components | — | — | — | 3,60,886.14 | |
| — | 2.65 | — | — | ||
| Erection of fabricated and galvanized steel work (SPS) other than mast with necessary components | — | — | — | 24,016.16 | |
| — | 25.00 | — | — | ||
| Supply of Single bracket assembly (without insulator) | — | — | — | 5,40,915.25 | |
| — | 25.00 | — | — | ||
| Erection of Single bracket assembly | — | — | — | 52,784.75 | |
| — | 15.00 | — | — | ||
| Supply of composite type Stay and bracket tube insulators (CD 1050mm) for single bracket assembly | — | — | — | 1,64,494.35 | |
| — | 10.00 | — | — | ||
| Supply of Stay and bracket tube Porcelain type insulators (CD 1050mm) for single bracket assembly | — | — | — | 1,07,179.8 | |
| — | 25.00 | — | — | ||
| Erection of insulators for single bracket assembly | — | — | — | 34,770 | |
| — | 0.35 | — | — | ||
| Supply of OHE with complete fitting (For Conventional type) without Contact & Catenary Wires as per explanatory Notes | — | — | — | 9,315.4 | |
| — | 0.35 | — | — | ||
| Erection of OHE with complete fitting (For Conventional type) without Contact & Catenary Wires as per explanatory Notes | — | — | — | 9,281.53 | |
| — | 3.00 | — | — | ||
| Supply of copper jumper wire | — | — | — | 22,373.76 | |
| — | 3.00 | — | — | ||
| Erection of copper jumper wire | — | — | — | 2,195.64 | |
| — | 27.00 | — | — | ||
| Supply of Guy Rod Assembly | — | — | — | 2,81,690.73 | |
| — | 27.00 | — | — | ||
| Erection of Guy Rod Assembly | — | — | — | 33,107.4 | |
| — | 10.00 | — | — | ||
| Supply of 9-Tonne Porcelain insulator (CD 1050mm) | — | — | — | 84,209.5 | |
| — | 10.00 | — | — | ||
| Erection of 9-Tonne insulator | — | — | — | 14,062.6 | |
| — | 29.00 | — | — | ||
| Supply of single earth electrode with earth pit complete as per RDSO Drg No. ETI / OHE / P / 7020 or latest | — | — | — | 1,19,980.83 | |
| — | 29.00 | — | — | ||
| Erection of single earth electrode with earth pit complete as per RDSO Drg No. ETI / OHE / P / 7020 or latest | — | — | — | 38,960.63 | |
| — | 257.00 | — | — | ||
| Manufacturing supply of Retro Reflective type structure Number plate as per RDSO drg. No.ETI / OHE / P / 7503 or latest along with all fixing arrangement. | — | — | — | 1,73,803.96 | |
| — | 257.00 | — | — | ||
| Erection / Fixing of Retro Reflective type structure Number plate as per RDSO drg. No.ETI / OHE / P / 7503 or latest along with all fixing arrangement. | — | — | — | 21,878.41 | |
| — | 285.00 | — | — | ||
| Supply of Structure Bonds | — | — | — | 2,55,382.8 | |
| — | 285.00 | — | — | ||
| Erection of Structure Bonds | — | — | — | 63,213 | |
| — | 175.00 | — | — | ||
| Supply of Transverse (cross rail, inter-track, Z & special type) bonds | — | — | — | 1,83,914.5 | |
| — | 175.00 | — | — | ||
| Erection of Transverse (cross rail, inter-track, Z & special type) bonds | — | — | — | 26,552.75 | |
| — | 315.00 | — | — | ||
| Supply of Longitudinal bonds | — | — | — | 2,10,416.85 | |
| — | 315.00 | — | — | ||
| Erection of Longitudinal bonds | — | — | — | 44,663.85 | |
| — | 980.00 | — | — | ||
| Supply of earth bus | — | — | — | 2,23,498.8 | |
| — | 980.00 | — | — | ||
| Erection of earth bus | — | — | — | 78,762.6 | |
| — | 70.00 | — | — | ||
| Supply and fixing of cleat 02 Nos. for each structure Bond on platform wall with screw | — | — | — | 5,835.9 | |
| — | 70.00 | — | — | ||
| Platform cutting and covering with concrete according to Bond size | — | — | — | 20,841.8 | |
| — | 0.05 | — | — | ||
| Erection of Contact Wire only after dismentling of Catenary wire under FOB (Overline structure) | — | — | — | 668.57 | |
| — | 17.00 | — | — | ||
| Supply of Contact wire Ending Clamp | — | — | — | 5,587.05 | |
| — | 79.00 | — | — | ||
| Supply of Catenary wire Ending Clamp | — | — | — | 43,055.79 | |
| — | 15.00 | — | — | ||
| Supply of electrolytic Copper Hard drawn Dropper wire 5mm dia | — | — | — | 12,997.05 | |
| — | 15.00 | — | — | ||
| Erection of electrolytic Copper Hard drawn Dropper wire 5mm dia | — | — | — | 368.7 | |
| — | 2.00 | — | — | ||
| Dismentling & removal of Anchor assembly | — | — | — | 1,752.08 | |
| — | 20.00 | — | — | ||
| Dismantling of Bracket Assembly | — | — | — | 32,515.8 | |
| — | 5.00 | — | — | ||
| Cutting and removal of existing structure | — | — | — | 5,616.5 | |
| — | 1.00 | — | — | ||
| Dismantling of Guy Rod Assembly | — | — | — | 769.19 | |
| — | 2.12 | — | — | ||
| Dismantling of fabricated steel other than mast | — | — | — | 33,487.03 | |
| — | 0.25 | — | — | ||
| Dismantling of OHE / Alluminium Feeder Wire | — | — | — | 4,569.76 | |
| — | 1.00 | — | — | ||
| Dismantling of copper jumper | — | — | — | 682.52 | |
| — | 1.00 | — | — | ||
| Shifting of ATD / BWA from one mast to another | — | — | — | 4,165.64 | |
| — | 30.00 | Each Span | — | ||
| Raising / Restoration of OHE height as per OHE profile by Change of incumbrance / Re-droppering of span | — | — | — | 57,278.7 | |
| — | 139.00 | Each Span | — | ||
| Slewing of OHE (including Restoration of OHE) | — | — | — | 2,08,060.76 | |
| — | 8.00 | — | — | ||
| Preparation of computerized OHE Layout Plan (LOP) for station Yards | — | — | — | 42,250.88 | |
| — | 25.00 | — | — | ||
| Supply and erection of "Electric Engine Stop" Board size 900x600x 2mm with supply of fixing material (Clamp, back flat strip & fasteners) | — | — | — | 1,03,533.75 | |
| — | 35.00 | — | — | ||
| Supply and erection of "Caution unwire turnout" Board size 900x600x 2mm with supply of fixing material (Clamp, back flat strip & fasteners) | — | — | — | 98,074.55 | |
| — | 45.00 | — | — | ||
| Supply and erection of "Caution live wire" Board size 400x270x 2mm with supply of fixing material (Clamp, back flat strip & fasteners) | — | — | — | 1,09,913.4 | |
| — | 26.00 | — | — | ||
| Supply and erection of "Caution clearance to OHE nearby restricted" Board size 450x270x 2mm with supply of fixing material (Clamp, back flat strip & fasteners) | — | — | — | 35,186.06 | |
| — | 25.00 | — | — | ||
| Supply and erection of "Power Block Working Limit" Board size 450x450x2mm with supply of fixing material (Clamp, back flat strip & fasteners) | — | — | — | 38,168.5 | |
| — | 25.00 | — | — | ||
| Supply and erection of "Protective Area" Board size 12"x18" with supply of fixing material (Clamp, back flat strip & fasteners) | — | — | — | 69,682 | |
| — | 5.00 | — | — | ||
| Manufacturing, Supply & erection of Engine Stop Board / Public Caution Boards for Height Guage Uprights of L/xing of size 600 x 900 x 2mm with supply of fixing material (Clamp, back flat strip & fasteners) | — | — | — | 9,618.55 | |
| — | 63.00 | — | — | ||
| Supply of various types 25KV caution Board / Plates as per explanatory Notes | — | — | — | 23,579.01 | |
| — | 55.00 | — | — | ||
| Erection of various types 25KV caution Boards / plates as per explanatory Notes | — | — | — | 4,896.1 | |
| — | 49.00 | — | — | ||
| Supply of various types of 25KV Danger Boards / plates as per explanatory notes | — | — | — | 24,729.81 | |
| — | 41.00 | — | — | ||
| Erection of various types of 25KV Danger Boards / plates as per explanatory notes | — | — | — | 2,629.33 | |
| — | 20.00 | — | — | ||
| Design, manufacturing, supply of Retro Reflective type Sigma Board with non- reflective black ground as per RDSO drg. No. TI/Drg/OHE/PLTBRD/RDSO/ 00036/12/0 (Size 450 mm x 600 mm) and RDSO specification No. ETI/OHE/33A (12/97) Rev. 8 or latest including transportation and all taxes etc. | — | — | — | 36,187.2 | |
| — | 20.00 | — | — | ||
| Cost of 4 Nos. 12mm dia GI nuts & bolts 300 mm long (fully threaded) with necessary washer, spring washer for different OHE Mast / Portals etc including transportation and all taxes | — | — | — | 4,972.2 | |
| — | 20.00 | — | — | ||
| Cost of GI backing angle for mounting arrangement size 40x40x5x450mm (4 Nos.) including transportation and all taxes | — | — | — | 8,507.4 | |
| — | 20.00 | — | — | ||
| Erection of clamps-GI backing angle for arrangement size 40x40x5x450mm (4 Nos.) 12mm dia GI nuts & bolts 300 mm long (fully threaded) with necessary washer, spring washer including Retro Reflective type sigma board with non reflective back ground at different OHE Mast / Portals etc including transportation and all taxes | — | — | — | 6,302.4 | |
| — | 25.00 | — | — | ||
| Supply of 250m DJ Board | — | — | — | 48,159.75 | |
| — | 25.00 | — | — | ||
| Erection of 250m DJ Board | — | — | — | 6,878.25 | |
| — | 25.00 | — | — | ||
| Supply of 500m DJ Board | — | — | — | 48,159.75 | |
| — | 25.00 | — | — | ||
| Erection of 500m DJ Board | — | — | — | 6,878.25 | |
| — | 25.00 | — | — | ||
| Supply of DJ open Board | — | — | — | 41,051.75 | |
| — | 25.00 | — | — | ||
| Erection of DJ open Board | — | — | — | 7,463 | |
| — | 25.00 | — | — | ||
| Supply of DJ close Board | — | — | — | 41,054.5 | |
| — | 25.00 | — | — | ||
| Erection of DJ close Board | — | — | — | 7,477.75 | |
| — | 5.00 | — | — | ||
| Handling, Leading, loading and Transportation charges for Railway supply material from different Railway sites and released material from different Railway sites, if any to concerned TRD Depot | — | — | — | 13,903.05 | |
| — | 50.00 | — | — | ||
| Supply of earth bus of MS flat of size 75mmx8mm etc | — | — | — | 11,572.5 | |
| — | 50.00 | — | — | ||
| Erection of earth bus of MS flat of size 75mmx8mm etc | — | — | — | 3,910.5 | |
| — | 20.00 | — | — | ||
| Supply of XLPE insulated PVC sheated Aluminium conductor cable 70 sqmm, 2 core suitable for outdoor applications 1100 volt grsde armoured aluminium cable from AT to distribution box. of copper strips of size 25mmx3mm for earthing of AT to OHE masts | — | — | — | 7,288.8 | |
| — | 25.00 | — | — | ||
| supply of shock treatment chart | — | — | — | 38,034.75 | |
| — | 25.00 | — | — | ||
| Erection of shock treatment chart | — | — | — | 7,720.5 | |
| — | 10.00 | — | — | ||
| Supply of Number Plate for Isolators with requisite clamps and nuts and bolts of required size | — | — | — | 3,287 | |
| — | 10.00 | — | — | ||
| Erection of Number Plates for Interrupters and isolators etc with requisite clamps and nuts and bolts of required size | — | — | — | 823.7 | |
| — | 12.00 | — | — | ||
| "Supply of Contact Wire Parallel clamp (LARGE) RI No. 1031-2 with RDSO Drg .No. ETI/OHE/P/1030-2 REV-D or latest " | — | — | — | 2,631.96 | |
| — | 8.00 | — | — | ||
| Supply of Contact Wire Parallel Clamp (Small) RI No.-1041-2, RDSO Spec: TI/SPC/OHE/Fittings/0130 with A&C Slip No.1, Drg. No.: ETI/OHE/P/1040-2 Rev.E or latest | — | — | — | 1,557.36 | |
| — | 1.00 | — | — | ||
| Gear less Hand operated pulling & lifting machine of 0.8 tonne | — | — | — | 12,500 | |
| — | 2.00 | — | — | ||
| Ratchet lever hoist pull lift of 0.8 tonne | — | — | — | 12,710 | |
| — | 4.00 | — | — | ||
| Come along clamp for contact wire | — | — | — | 5,853.32 | |
| — | 4.00 | — | — | ||
| Come along clamp for catenary suitable for 65 sqmm (19/2.108 mm) conductor 3 ton with load test certificate from Govt. approved laba s per Drg. IM/ACAC/03/ 12/107 | — | — | — | 5,333.32 | |
| — | 3.00 | — | — | ||
| Earth auger | — | — | — | 34,500 | |
| — | 1.00 | — | — | ||
| Tree prunner | — | — | — | 13,876.5 | |
| — | 1.00 | — | — | ||
| Rail hole Machine as PER RDSO DRG. NO. TM/SM/03 DT. 19/11/1992 FIRST REVEISION 2020 or latest | — | — | — | 35,200 | |
| — | 5.00 | — | — | ||
| Operating Rod (Pole) for 25 KV Drop out fuse switch as per RDSO's Spec. No. ETI/PSI/14(1/86) rev-1 or latest | — | — | — | 22,345 | |
| — | 6.00 | — | — | ||
| ALUMINIUM EXTENSION LADDER 11M.Aluminium ladder extension wall support ladder 24/40 as specification given below aluminium alloy wall support extension ladder proved with top hand rails and platform steps made of 26* 3 MM round corrugated fluted pipe main extrusion made up of aluminium alloy section 66*32*3.18 thickness of the 30 grade T6 TEMPE, closed height 24 feet additional MSGUIDE PIPE fixed inside height 40 feet additional MSGUIDE pipe fixed inside of the ladder at 1 mtr internal for stability of ladder arms. | — | — | — | 91,488 | |
| — | 2.00 | — | — | ||
| Aluminium Straight Ladder 16 Feet height of Al. Section (C-66.67x31.75x3.18mm) with step corrugated pipe dia, 25.4mm, distance of step 305 mm non skidding with rubber shoe on bottom. (In one piece without joints) | — | — | — | 9,120 | |
| — | 2.00 | — | — | ||
| Digital Dynamoter (3500 kgf) | — | — | — | 45,600 | |
| — | 10.00 | — | — | ||
| Hacksaw Blades, Spec. Size (Inches-22L X 1.5W X 0.80W / mm -550L X 40W X 2.00 Thick = 6 TPI | — | — | — | 10,350 | |
| — | 2.00 | — | — | ||
| Torque Wrench 25-135NM | — | — | — | 6,159 | |
| — | 20.00 | — | — | ||
| Supply of Packing Saddle copper RI No.1174, Drg. Ref. No. RE/33/P/1174 Rev-B or latest | — | — | — | 333.4 | |
| — | 20.00 | — | — | ||
| Insulation Bond Sleeve suitable for Bond strip size 40mm X 6mm as per latest RDSO spec. and Drg. | — | — | — | 2,100 | |
| — | 14.00 | — | — | ||
| D-Shackle set of 1 each (1", 3/4", 5/8", 1/2") | — | — | — | 9,878.26 | |
| — | 500.00 | — | — | ||
| Galvanized Steel Anti Creep Wire (19/2.50mm) As per RDSO specification No. ETI/OHE/36 (12/73) With A&C Slip 1 or latest | — | — | — | 41,515 | |
| — | 10.00 | — | — | ||
| Supply of RAISED REGISTER ARM CLAMP WITH PACKING SADDLE COMPLETE SET. AS PER RDSO DRG NO. ETI/OHE/P/1370-1(Rev-J) OR LATEST & RDSO SPECIFICATIONS TI/SPC/ OHE/FITTINGS/0130 (10/13) Rev. 1 OR LATEST & ETI/OHE/13(4/84) WITH A & C-1 to 4 OR Latest | — | — | — | 2,584 | |
| — | — | — | 7,27,486.75 | ||
| — | 25.90 | — | — | ||
| Erection of galvanized steel fabricated masts / other supporting structure | — | — | — | 2,54,906.76 | |
| — | 1.65 | — | — | ||
| Erection of fabricated and galvanized steel work (SPS) other than mast with necessary components | — | — | — | 14,953.45 | |
| — | 25.00 | — | — | ||
| Erection of Single bracket assembly | — | — | — | 52,784.75 | |
| — | 25.00 | — | — | ||
| Erection of insulators for single bracket assembly | — | — | — | 34,770 | |
| — | 0.35 | — | — | ||
| Erection of OHE with complete fitting (For Conventional type) without Contact & Catenary Wires as per explanatory Notes | — | — | — | 9,281.53 | |
| — | 3.00 | — | — | ||
| Erection of copper jumper wire | — | — | — | 2,195.64 | |
| — | 3.00 | — | — | ||
| Erection of Guy Rod Assembly | — | — | — | 3,678.6 | |
| — | 10.00 | — | — | ||
| Erection of 9-Tonne insulator | — | — | — | 14,062.6 | |
| — | — | — | 668.57 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCApril-2022.pdf
ATTACHMENT
GCCACSNo.1.pdf
ATTACHMENT
GCCACSNo.2.pdf
ATTACHMENT
GCCACSNo.3.pdf
ATTACHMENT
GCCACSNo.4.pdf
ATTACHMENT
GCCACSNo.5.pdf
ATTACHMENT
GCCACSNo.6.pdf
ATTACHMENT
GCCACSNo.7.pdf
ATTACHMENT
GCCACSNo.8.pdf
ATTACHMENT
GCCACSNo.9.pdf
ATTACHMENT
GCCACSNo.10.pdf
ATTACHMENT
GCCACSNo.11.pdf
ATTACHMENT
Tenderdocument804R1-TRD_1.pdf
ATTACHMENT
MandatoryAnnexurestobeuploadedwithbid.pdf Mandatory Annexures to be uploaded
ATTACHMENT
Clarification for Annexure V of GCC
ATTACHMENT
2022-CE-I-CT-GCCCorrespondencedated.14.05.2024.pdf
ATTACHMENT
MandatoryAnnexurestobeuploadedwithbid.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].