Completation of Balance work of Casulity Block at CHC Surankote,Poonch

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. ( not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm. On plan, depth up to 1.5 mtr. Including disposal of excavated earth up to 1 mtr. from cutting edge, disposed earth is to be leveled neatly dressed in: all kinds of soil .

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering. 1:5:10 (1 cement :5 coarse sand :10 graded stone crushed aggregate 40 mm nominal size) . including all leads /lifts , carriage , handling and re-handaling ( Complete job)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering 1:3:6 with ( 1 cement :3coarse sand :6 graded crushed stone aggregate 20 mm nominal size) .including all leads /lifts , carriage , handling and re-handaling ( Complete job)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering 1:3:6 with ( 1 cement :3coarse sand :6 graded crushed stone aggregate 20 mm nominal size) using 20% stones) . including all leads /lifts , carriage , handling and re-handaling ( Complete job)

Brick work with common burnt clay F.P S ( non modualar) bricks in super structure above plinth level lupto floor V level.of class designation 75 cement mortar 1:6 (1 cement :6 coarse sand). including all leads /lifts , carriage , handling and re-handaling ( Complete job)

Half brick masonry with bricks of class designation 75 in foundations plinth and superstructure upto floor V-level in cement mortar 1:4 (1cement :4 coarse sand ) including all leads /lifts , carriage , handling and re-handaling ( Complete job)

Providing wood work in frames of doors, windows and clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or with dash fastners shall be paid for separately). Sal Wood

Providing 40x 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolsts, nuts and wooden plugs and embeddings in cement concrete block 30x10 x15cm 1:3:6 mix ( 1 cement :3 coarse sand :6 graed stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters , buttresses , plinth and string courses , fillets , columns , pillrs , piers , abutments , posts ans atruts etc up to floor five level excluding cost of centring shuttering finishing and reinforcement 1:1:5:3 (1 cement :1 .5 coarse sand :3 graded crushed stone aggregate 20 mm nominal size ). including all leads /lifts , carriage , handling and re-handaling ( Complete job)

Providing and laying Reinforcement cement concrete 1:1.5 :3 (1 cement:1 1.5 coarse sand :3 graded crushed stone agg. 20 mm nominal ) in suspended floors, balconies, landings, and stair cases having slope upto 15, excluding the cost of centring shuttering, All work up to floor v level.. including all leads /lifts , carriage , handling and re-handaling ( Complete job)

Reinforcement for RCC work including straightening,cutting bending, placing in position and binding all complete Thermo Mechanical Treated bars.

Centring and shuttering including strutting propping etc. and removal of form for :-

Columns , pillars , piers .abutments posts and struts

Lintels, beams , plinth beams, girders, bressumers and cantilevers

Suspended floors, roofs, landings, balconies and access platforms.

Suspended floors, roofs, landings, balconies and access platforms.

6 mm thick cement plaster to ceiling of mix 1:3 (1 cement 3 fine sand)

15 mm thick cement plaster on the rough side of single or half brick wall of mix 1:6 ( 1 cement :6 Coarse sand )

12 mm thick cement plaster of mix 1:6 ( 1 cement :6 Coarse sand )

Providing and fixing glazed shutters 35 mm thick for doors, windows and clerestory windows using 10kg /sqm ( 4mm thick) floatglass panes including ISI marked M.S pressed butt hinges bright finished butt hinges of req. size with necessary screws. 1st class Kail wood

Providing and fixing 35 mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked black enamelled M.S . pressed Butt hinges bright finishedof req size with necessary screws excluding panelling which will be paid for separately.all complete as per direction of Engineer In Charge. First Class Kail - Wood .

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors , windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick 5.5 mm thick glass panes Plain particle board flat pressed , 3 layer or graded wood particle board medium density Grade I, IS 3087 marked

Providing and fixing 35 mm thick wire gauze shutters using galvanized M.S wire gauze of average width for aperture1.4 mm in both directions with wire of dia 0.63 mm for doors , windows and clerestory windows including ISI marked M.S pressed butt hinges bright finished butt hinges of req. size with necessary screws. 1st class Kail wood

Providing and fixing wooden moulded beading to door and window frames with iron screws,plugs and priming coat on unexposed surface etc. complete 50x20mm

Stone filling including cost of stones. In horizontal on level .including all leads /lifts , carriage , handling and re-handaling ( Complete job)

Supply and filling in plinth with fine sand under floors including , watering , ramming consolidation and dressing .including all leads /lifts , carriage , handling and re-handaling ( Complete job)

Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand:10 graded brick aggregate 40 mm nominal size) inretaining wall/return wall,columns etc. excluding cost of centering and shuttering all work upto floor V level .including all leads /lifts , carriage , handling and re-handaling ( Complete job)

Supply and filling of river bed material in layers not exceeding 20 cm in depth,rolling each layer with power road roller including carriage from source to site of work loading un-loading stacking laying watering ,dressing etc complete job .including all leads /lifts , carriage , handling and re-handaling ( Complete job)

Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate ) finished with a floating coast of neat cement including cement slurry but excluding the cost of nosing of steps etc complete 50 mm thick with 20 mm nominal size stone aggregate crushed .including all leads /lifts , carriage , handling and re-handaling ( Complete job)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622) of approved make in all colours and shades, laid on 20mm thick 1:4 (1 cement :4 coarse sand), including grouting the joints with white cement and matching pigment etc. complete size of tile 60x60cm

Providing and fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufactures) of is t quality confoming to IS 13755 of NITCO, ORIENT SOMANY , KAJARIA or equivalent make in colour such as white ,Ivory , Grey ,Fume Red , Brown laid on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc complete

Providing and fixing 1st quality ceramic glazed tiles conforming to IS:13753 of minimum thickness 5 mm of approved make like NITCO , ORIENT ,, SOMANY, KAJARIA or equivlant make in all colours , shades except begundy,bottle green , black of any size as approved by Engineer - in - charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3( 1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchen platform,vanity counters windows sills facias and similar locations of required size of approved shade,colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement:4 coarse sand ) with joints treated with white cement mixed with matching pigments,exposy touch ups including rubbing,curing moulding and polishing to edge to give high gloss finish etc. complete at a levels. Raj Nagar plain white marble/udhaypuri green marble/zebra black marble (Area of slab upto 0.5 Sqm).16mm thick

Providing and applying white cement based putty of average thickness 2 mm,of approved brand and manufacture,over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work ( Two or more coats) over and including priming coat with cement primer

Exterior Finsihsing : Finishing walls with water proofing cement paint of reuired shade:. New work( Two or more coats) applied @ 3.84 kg/10 sqm and including priming coat with cement primer

Painting with ready mixed synthetic enamel paint of approved brand and manufactureof required colour to give an even shade.Two or more coat on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels , plates etc . Including welding , grinding , buffing , polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete , i/c fixing the railing with necessary accessories and stainless steel dash fastners , stainless steel bolts etc . of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts , bolts , fasteners etc

Providing and fixing hardware anodised aluminium fittings including screwes complete

Tower bolt 150 x 10 mm

Tower bolt 200 x 10 mm

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour and shade with necessary screw etc complete

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with nuts and screws etc.complete: 300x16 mm

Providing and fixing ISI marked oxidised M.S handles conforming to IS : 4992 with screws etc complete

Providing and fixing oxidised M.S casement stays (straight peg type) with necessary screws etc. complete.250mm weighing not less than 150 gms

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs,balconies,terracies etc (Make Armocrete of SWC Chryso France) Consisting of (a) applying a slurry coat of neat cement using 2.75 Kg/Sqm of cement admixed with water proofing compound conforming to IS 2645 nand approved by Engineer-in-charge over the RCC Slab including adjoining walls upto 300mm height including cleaning the surface before treatment.(b)Laying brick bats with mortar using broken bricks/brick bats 25mm to 115mm size with 50% of cement mortar 1.5 (1 cement:5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-In -Charge over 20mm thick layer of cement mortar of mix 1:5 (1 cement:5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-In-Charge to required slope and treating similary the adjoining walls upto 300mm height including rounding of junction of walls and slabs.(c) After two days of proper curing applying a second coat of cement slurry using 2.75 /Sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-Charge.(d)Finishing the surface with 20mm thick jointless cement mortar of mix 1:4(1 Cement:4 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in -Charge laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm/Sqm deep.(e)The whole terrace so finished shall be floated with water for aminimum period of two weeks for curing and for final test.All above operation to be done in order and directed and specified by Engineer-In-Charge.With average thickness of 120mm and minimum thicknessa at Khurra as 65mm.

Ghulam Qadir