Drilling of borewell and installation of pump and motar in ward no 13 kote area and installation of cable pipeline to already drilled borewells in ward no 26,19,31 and 23 and installation of valves near kanaka statue and gouligarahatti ward no 20 and neard ZP tank in ward no 31 and near nandini water and repair of motar and jackwell at pump house in sira cmc limits

Drilling of borewell and installation of pump and motar in ward no 13kote area and installation of cable pipeline to already drilled borewells in ward no 26,19,31 and 23 and installation of valves near kanaka statue and gouligarahatti ward no 20 and neard ZP tank in ward no 31 and near nandini water and repair of motar and jackwell at pump house in sira cmc limits

Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x4 S...

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 50 mm

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit.

Providing wrought mild steel (galvanized) GI collar confirming to IS 1239-II, 1991 with latest amendments if any - For 32 mm dia GI collar:

Supply and delivery at site wrought middle steel (galvanized) GI bend confirming to IS 1239-II, 1991 with latest amendments if any - For 32 mm dia GI BEND

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x4 S...

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...

Providing wrought mild steel (galvanized) GI collar confirming to IS 1239-II, 1991 with latest amendments if any - For 32 mm dia GI collar:

Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239-II, 1991 with latest amendments if any for: For 40 mm dia GI elbow

Providing wrought mild steel (galvanized) GI collar confirming to IS 1239-II, 1991 with latest amendments if any - For 50 mm dia GI collar:

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x4 S...

Supply and delivery at site wrought middle steel (galvanized) GI bend confirming to IS 1239-II, 1991 with latest amendments if any - For 32 mm dia GI BEND

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit.

Rewinding of monoblock motor with copper insulaton wire suitable gauge as per ISI specification with all necessary materials and labour,tools and equipments with guarantee period of not less than 12...

Providing Ball bearing as per ISI specifiction with guarantee period of not less than 12 months Bearing cost for 120 HP

Providing terminal plate as per ISI specifiction with guarantee period of not less than 12 months terminal plate 80 to 120

Water Treatment Plants HORIZANTAL PUMP ALL TYPES-For Pump open & refitting after repairs - 100 HP to 150 HP

Water Treatment Plants HORIZANTAL PUMP ALL TYPES - For Impeller breezing and making - 100 HP to 150 HP

Water Treatment Plants HORIZANTAL PUMP ALL TYPES - For Shaft steel welding and making bearing sheet Each - 100 HP to 150 HP

Water Treatment Plants HORIZANTAL PUMP ALL TYPES - For Shaft threading making Each - 100 HP to 150 HP

Water Treatment Plants HORIZANTAL PUMP ALL TYPES - For Joint rope of 1kg - 100 HP to 150 HP

Water Treatment Plants HORIZANTAL PUMP ALL TYPES - For Pump shaft bend thrown - 100 HP to 150 HP

Water Treatment Plants HORIZANTAL PUMP ALL TYPES - For Pump shaft getting check nut Each - 100 HP to 150 HP

Water Treatment Plants HORIZANTAL PUMP ALL TYPES - For Both coupling new set - 100 HP to 150 HP

ALL TYPES OF JACK WELL V-T PUMP DETAILS as per ISI specifiction with guarantee period of not less than 12 months - For Transportation charges both side - 120 HP to 200 HP

ALL TYPES OF JACK WELL V-T PUMP DETAILS as per ISI specifiction with guarantee period of not less than 12 months -For Pump dismentaling and refitting after attending repairs. Up to 60 HP

ALL TYPES OF JACK WELL V-T PUMP DETAILS as per ISI specifiction with guarantee period of not less than 12 months - For Top body bush fitting - Up to 60 HP

ALL TYPES OF JACK WELL V-T PUMP DETAILS as per ISI specifiction with guarantee period of not less than 12 months - For Bottom body bush fitting - Up to 60 HP

ALL TYPES OF JACK WELL V-T PUMP DETAILS as per ISI specifiction with guarantee period of not less than 12 months - For Pumps stage body bush fitting Each - Up to 60 HP

ALL TYPES OF JACK WELL V-T PUMP DETAILS as per ISI specifiction with guarantee period of not less than 12 months - For Pump body necking fitting Each - Up to 60 HP

ALL TYPES OF JACK WELL V-T PUMP DETAILS as per ISI specifiction with guarantee period of not less than 12 months - For Impeller breezing making - Up to 60 HP

ALL TYPES OF JACK WELL V-T PUMP DETAILS as per ISI specifiction with guarantee period of not less than 12 months - For Pump open & fitting at work shop - Up to 60 HP

ALL TYPES OF JACK WELL V-T PUMP DETAILS as per ISI specifiction with guarantee period of not less than 12 months - For Connecting bush G.M new making Each - Up to 60 HP

ALL TYPES OF JACK WELL V-T PUMP DETAILS as per ISI specifiction with guarantee period of not less than 12 months - For Oil inside new Fitting & threading Each - Up to 60 HP

ALL TYPES OF JACK WELL V-T PUMP DETAILS as per ISI specifiction with guarantee period of not less than 12 months - For Balancing spaider rubber guide Each - Up to 60 HP

ALL TYPES OF JACK WELL V-T PUMP DETAILS as per ISI specifiction with guarantee period of not less than 12 months - For New T.T nipple making - Up to 60 HP

ALL TYPES OF JACK WELL V-T PUMP DETAILS as per ISI specifiction with guarantee period of not less than 12 months - For Transportation charges both side - Up to 60 HP

Rewinding of monoblock motor with copper insulaton wire suitable gauge as per ISI specification with all necessary materials and labour,tools and equipments with guarantee period of not less than 12...

ALL TYPES OF JACK WELL V-T PUMP DETAILS as per ISI specifiction with guarantee period of not less than 12 months - For Oil inside new Fitting & threading Each - Up to 60 HP

Supply and fixing of Cast steel ASTM A 216 Gr.WCB double flanged Dual plate check valve Conforming to API 594 with latest amendments Shaft material shall be SS420/431 and spring shall be spring steel ...

Supply and fixing of Cast steel ASTM A 216 Gr.WCB double flanged Dual plate check valve Conforming to API 594 with latest amendments Shaft material shall be SS420/431 and spring shall be spring steel ...

Providing and fixing kinetic AIR VALVE of PN 16.0 for automatic discharge of accumulate air during working condition, conforming to IS 14845 / EN 1074-4. Body and bonnet of DI conforming to IS-1865 o...

Supply and fixing of Cast steel ASTM A 216 Gr.WCB double flanged Dual plate check valve Conforming to API 594 with latest amendments Shaft material shall be SS420/431 and spring shall be spring steel ...

HDPE pipe grade PE 100-PN 10 , 75mm

GI Heavy duty pipes 50mm dia

HDPE pipe grade PE 100 -PN 10 75mm

For line shaft seat welding makin each upto 60HP

Power contractor

Water treatment plants HORIZONTAL PUMP ALL TYPES for pump open and retrofitting after repairs 100 HP to 150 HP